Tender For Provn Of Monkey Mesh Protection For Water Tank 2000 Ltr Qty 01, 1000 Ltr Qty 35 And 500 Ltr Qty 32 Of Otm Accn Of Certain Mil Unit, Provn Of Drainage Sys Of Explosive Store House At Amn Point Of Certain Mil Unit, Provn Of 01 X Parking Shed
Tender Value
19.80 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
18 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Monkey Mesh Protection For Water Tank 2000 Ltr Qty 01, 1000 Ltr Qty 35 And 500 Ltr Qty 32 Of Otm Accn Of Certain Mil Unit, Provn Of Drainage Sys Of Explosive Store House At Amn Point Of Certain Mil Unit, Provn Of 01 X Parking Shed 12 Mtrs Length And 5 Mtrs Width Near Office Complex For Jcos/Or Of Certain Mil Unit At Binnaguri Mil Stn Under Ge (S) Binnaguri
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation (soft/loose soil) by mechanical means (Hydraulic excavator)/ in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | Removal of excavated surplus soil not exc 250m and not exc 500m where directed at a level n.exc 1.50 m above starting point. |
| 3 | Returning , filling in including spreading , leveling , watering and well ramming in layers not exc 25 cm in soft/loose soil. |
| 4 | M&L for Plain cemmet concrete 1:2:4 (nominal mix) type B-1 using 20 mm graded stone aggregate in foundation filling and mass concrete. |
| 5 | M&L Brick work with fly ash bricks (old size bricks) straight or curved on plan exceeding 6mtr mean raidus bulit in C:M 1:4 all as specified. |
| 6 | M&L for Plaint cement concrete 1:2:4 (nominal mix) type B-0 using 12.5 mm graded stone aggregate as in coping etc |
| 7 | M&L rendering 10 mm thick on brick walls in CM 1:6 finished even and smooth wiithout using extra cement complete all as specified |
| 8 | Removing excavated materialn exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point |
| 9 | M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for fdn/ mass concrete complete all as specified |
| 10 | M&L for RCC Type B-1,M-20 (1:1.5:3) (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified. |
| 11 | M&L RCC Type B1 M-20 (1:1.5:3) (20 mm graded aggregate) in Columns, pillars, piers, posts and struts complete all as specified. |
| 12 | M&F Formwork flat fair finished to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified. |
| 13 | M&L Formwork square, rectangular or ploygonal fair finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified. |
| 14 | M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified |
| 15 | Ditto, as above item no 9 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified |
| 16 | M&L for Fly ash brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified |
| 17 | Sand filling under floors or in foundations including watering and consolidation |
| 18 | M &L for Stone Hardcore of gauge n exc. 63 mm, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface complete all as specified |
| 19 | M&L for 100 mm thick cement concrete type C2 (1:3:6 ) (40 mm graded aggregate) as in subbase of floor etc and finished the complete all as specified |
| 20 | M&L 80 mm thick M-30 grade factory made vibratory compacted cement concrete rubber moulded, interlocking paver block any shape and size confiroming to IS 15658-2006 with grey cement and pigment as approved laid over and incl 50 mm thick consolidated sand cushion and joints filled with sand complete all as specified |
| 21 | S&F steel work in Trusses, purlins, posts and the like using tubular/ square hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming I.S.1161-2014/IS 4923-1977 grade St-240 complete all as specified |
| 22 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified |
| 23 | S& F of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 24 | M&L for PCC type C-2, 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection, pavement etc and finished the surface even and smooth without using extra cement complete all as specified |
| 25 | S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; frame work of water tanks and similar work conforming to Fe290,Gde-E-165 and fixed over RCC roof slab with fasteners complete all as specified |
| 26 | M&L for expanded metal n.exc 4 Kg/ Sqm, cut to length, bent to shape required and welded with steel members complete all as specified |
| 27 | S&F 50mm size butt hinges, medium weight, cold rolled mild steel complete all as specified |
| 28 | S&F 75mm size hasp and staple, mild steel, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified |
| 29 | M&L for preparation of new or previously untreated steel/ iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic ennamel paint over a coat of red oxide, zinc chrome primer complete all as specified |
| 30 | M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sundn terminal box made out of GI sheet steel not less than 1.63mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost all as specified for the following :- |
| 31 | (a) One light point controlled by one way switch 5/6 amps. |
| 32 | (b) One socket out let 5/6 amps point on the same board |
| 33 | S&F Switch piano flush type 5/6 amps single pole one way complete all as specified |
| 34 | S&F Socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified |
| 35 | S&F Ceiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body complete all as specified |
| 36 | S&F LED lights fitting 1x 20W, 220V AC decorative box type with driver,IP 20, class I, wall/ surface mounted, integrated type with extruded aluminium housing integrated high efficiency electronic driver and surge suppressor of 4KV or more, luminaire efficiency not less than 120 lumens/watt, power factor not less than 0.90, CRI 80, THD 10%, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified. |
| 37 | S&F LED Bulk Head lights fitting 1x 9/10W, 220V AC integrated high efficiency electronic driver and surge suppressor of 4KV or more, luminaire efficiency not less than 120 lumens/watt, power factor not less than 0.90, CRI 80, THD 10%, operating range - 140 to 270 V, 50 Hz fixed etc connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified. |
| 38 | S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, single pole & neutral with din rail, IP-20 protection suitable for fixing MCB\\"S/lsolators complete including provision of blanking plates as required and taking down the old one complete all as specified |
| 39 | S&F MCB, Single pole & neutral 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified |
| 40 | S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘B’ curve, 10 KA all complete including taking down the old one complete all as specified |
| 41 | Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete all as specifiedNOTE : Two runs of 6 sqmm conductor for main and one run of 6 sqmm conductor as earth wire with proper colour coding including one run run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles |
| 42 | M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender