Tender For Provn Of Solid Waste Management Plant In Kankinara Mil Stn
Tender Value
1.46 Crore
Estimated cost
Bid Submission
04 Nov 2026
25 days left
EMD
2.21 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Solid Waste Management Plant In Kankinara Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exc 30cm depth and averaging 15cm deep and getting out in soft/loose soil complete all as specified and/or as directed by Engr-in-charge. |
| 2 | Removing excavated soil to a distance exceeding 50m but not exceeding 250m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed and/or as directed by Engr-in-charge. |
| 3 | Surface dressing not exceeding 15cm deep in soft/loose soil complete all as specified and/or as directed by Engr-in-charge. |
| 4 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and/or as directed by Engr-in-charge. |
| 5 | All as per item No.4 above but depth exceeding 1.5m and not exceeding 3.0m |
| 6 | Returning, filling in excavated approved soil, including spreading, levelling, watering and welll ramming in layers not exceeding 25cm thick complete all specified and/or as directed by Engr-in-charge. |
| 7 | M&L for sand filling under floors or in foundations including watering and consaladation complete all as specified and/or as directed by Engr-in-charge. |
| 8 | M&L for soling (or sub base) of well burnt old size bricks, one layers, laid on edge including filling of interstices complete all as specified and/or as directed by Engr-in-charge. |
| 9 | M&L for hard core of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and/or as directed by Engr-in-charge. |
| 10 | M&L for cement concrete (1:4:8), type D-2 (using 40mm graded stone aggregated) as in foundation, filling and mass concrete including sub base of floor complete all as specified and/or as directed by Engr-in-charge. |
| 11 | M&L for reinforced cement concrete of design mix M-25 (using 20 mm graded stone aggregates) in foundation, footings, plinth beams, bases for columns and the like complete all as specified and/or as directed by Engr-in-charge. Note:-Reinforcement shall be measured and paid separately |
| 12 | M&L for form work to sides of concrete foundations, footing, bases of colums, site & soffits of foundations and plinth beam and similar work for rough finished flat surfaces of concrete complete all as specified and/or as directed by Engr-in-charge. |
| 13 | M&L for reinforced cement concrete of design mix M-25 (using 20 mm graded stone aggregates) in columns, pillars, posts & struts complete all as specified and/or as directed by Engr-in-charge. Note:-Reinforcement shall be measured and paid separately) |
| 14 | M&L for form work to sides of square or rectangular columns, pillars, posts and struts for fair finished surfaces of concrete complete all as specified and/or as directed by Engr-in-charge. |
| 15 | M&L for mild steel TMT bars 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking. hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and/or as directed by Engr-in-charge. |
| 16 | M&L for mild steel TMT bars 5 to 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and/or as directed by Engr-in-charge. |
| 17 | M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and/or as directed by Engr-in-charge. |
| 18 | M&L for providing cement concrete (1:2:4), type B-1 (using 20mm graded stone aggregate) in cills, seismic and other similar bands, plinth courses, copings, benching, bed plates, bond stones, etc. including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and/or as directed by Engr-in-charge. |
| 19 | S&F mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 22.5cm but not exceeding 30 cm long and dia of shank 16 to 20mm complete all as specfied and/or as directed by Engr-in-charge. |
| 20 | S&F plates (plain or chequered) Fe-410-W(Gde E-250) quality 'B' channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and/or as directed by Engr-in-charge. |
| 21 | S&F rolled mild steel sections conforming to Fe-410-W (Gde E-250) quality B as in main and cross beams, columns, hip and jack rafters, purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and/or as directed by Engr-in-charge. |
| 22 | S&F rolled mild steel sections conforming to Fe-410-W (Gde E-250) as in roof trusses (framed) and trussed purlins including distance pieces, cleats etc. complete all as specified and/or as directed by Engr-in-charge. |
| 23 | S&F pre-painted galvalume aluminum zinc coating Gl based corrugated steel sheet 0.53 mm thick (TCT) of any colour having tensile strength of 550 Mpa as in roof covering of following specification, fixed with self tapping screws complete all as specified and/or as directed by Engr-in-charge.Total Coated Thickness 0.53mmBMT 0.455mm (0.45mm BMT Min)AZ 150 GSM Coating 40 micronPrimer coating (5+5) micronSuper Durable Polyester Coating (18+7) micronTypes of PanitSuper Durable Polyester Best in class SRI C3 Environment |
| 24 | S&F pre-painted galvalume aluminum zinc coating Gl based plain steel sheet 0.53 mm thick (TCT) of any colour having tensile strength of 550 Mpa as in roof covering of following specification, fixed with self tapping screws complete all as specified and/or as directed by Engr-in-charge: -Total Coated Thickness 0.53mmBMT 0.455mm (0.45mm BMT Min)AZ 150 GSM Coating 40 micronSuper Durable Polyester Coating (18+7) micron Primer coating (5+5) micronTypes of PanitSuper Durable Polyester Best in class SRI C3 Environment |
| 25 | S&F mild steel work in in wind tie cutting top to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including necessary drilling, bolting or riveting etc. complete all as specified and/or as directed by Engr-in-charge. |
| 26 | M&L for rendering 15 mm thick, on brick or concrete surfaces of wall, in cement mortar (1:6) finished the surface fair and even complete all as specified and/or as directed by Engr-in-charge. |
| 27 | M&L for rendering 20 mm thick, on brick or concrete surfaces of wall, in cement mortar (1:4) in two layers, each 10mm thick, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction, finished the surface fair and even complete all as specified and/or as directed by Engr-in-charge.Note:-WPC shall be measured and paid separately. |
| 28 | Supply only integral water proofing liquid complete all as specified. |
| 29 | M&L for applying three coats of white wash to newly plastered surfaces of walls including preparation of surfaces complete all as specified and/or as directed by Engr-in-charge. |
| 30 | Preparation of new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted over & including a coat of cement wash with white cement complete all as specified and/or as directed by Engr-in-Charge. |
| 31 | M&L for preparation of new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and/or as directed by Engr-in-Charge. |
| 32 | M&L for 75mm thick cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in floors and paving, laid in alternate panels and finished even and fair complete all as specified and/or as directed by Engr-in-Charge. |
| 33 | S&F framed work of rolled mild steel conforming to Fe-410-W (Gde E Kg 250) quality B as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging. fastening & fixing complete all as specified and/or as directed by Engr-in-Charge. |
| 34 | S&F mild steel plain black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets, fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and/or as directed by Engr-in-Charge. |
| 35 | M&L for providing cement concrete (1:3:6), type C-1 (using 20mm graded stone aggregate) for fixing of hold fast etc. including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and/or as directed by Engr-in-Charge. |
| 36 | M&L for welded steel wire fabric exceeding 4 Kg per Sqm in weight, fixed to wood or steel members complete all as specified and/or as directed by Engr-in-charge. |
| 37 | S&F mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5 cm long and dia of shank 11 to 15mm complete all as specified and/or as directed by Engr-in-Charge. |
| 38 | Supply, installation, testing and commissioning of organic waste composting machine (Capacity 500 Kgs per day) suitable for processing bio-degradable waste such as food waste, vegetable waste, canteen and garden waste including civil work (for foundatio), electric connection (from panel) and water connection complete all as specified and/or as directed by Engr-in-Charge. |
| 39 | Suppy, installation, testing and commissioning of bailer machine (5HP capacity) suitable for soild waste including civil work (for foundation), electric connection (from panel) etc. complete all as specified and/or as directed by Engr-in-Charge. |
| 40 | Supply, installation, testing and commissioning of kill waste machine / Waste disposal machine (Capacity 25 Kgs per hour and material no corrosive mild carbon steel of IS 2062-grade 'B' category cylindrical chamber as specified by BIS) suitable for solid and flexible waste material including civil works (for foundations) connection (from panel) etc.complete all as specified and/or as directed by Engr-in-Charge. |
| 41 | Supply and laying 25mm bore galvanized pipe \\"medium grade\\", including all new fittings complete all as specified and/or as directed by Engr-in-Charge. |
| 42 | Supply and laying of 20mm bore galvanized pipe \\"medium grade\\", including all new fittings complete all as specified and/or as directed by Engr-in-Charge. |
| 43 | M&L for construction of brick masonary valve chamber with 3.00 mm thick MS sheet cover and angle iron frame of size 40 x40x6 mm duly painted with two coats of black bituminous paint over coat of red oxide primer with and including all necessary earth work, excavation in soft/loose soil, returning filling in and removed of surplus soil to a distance not exc. 50 mtr, PCC work, brick work, plastering etc. with necessary locking arrangement with 50 mm size one No. Lock complete, size of pit internally 1.0x1.0x1.0 Mtr complete all as specified and/or as directed by Engr-in-Charge. |
| 44 | Supply and fix stop valves 25mm dia cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and/or as directed by Engr-in-Charge. |
| 45 | Supply and fix stop Valves 20mm dia cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and/or as directed by Engr-in-Charge. |
| 46 | Cutting of existing 100mm dia C.I pipe line, inserting Tee for taking branch connection of 50mm dia including fittings complete all as specified and/or as directed by Engr-in-Charge. |
| 47 | Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed and/or as directed by Engr-in-Charge. |
| 48 | M&L for PCC (1:3:6), type C-2 (using 40 mm graded stone aggregate) in foudations, filling and mass concrete complete all as specified and/or as directed by Engr-in-Charge. |
| 49 | M&L for brickwork with fly ash bricks (old size) built in cement mortar (1:4) straight or curved on plan exceeding 6 metre mean radius complete all as specified and/or as directed by Engr-in-Charge. |
| 50 | M&L for rendering 15 mm thick in cement and sand mortar (1:4) on fair faces of brick work or concrete surface of wall, finished the surfaced even and smooth without using extra cement complete all as specified and/or as directed by Engr-in-Charge. |
| 51 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length laid in position on wall as weep holes complete all as specified and/or as directed by Engr-in-Charge. |
| 52 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and/or as directed by Engr-in-Charge. |
| 53 | Add or deduct from item no. 82 here-in-before but for each 25mm girth or part thereof over or under 30cm complete all as specified and/or as directed by Engr-in-Charge. |
| 54 | Material and labour for precast RCC (1:2:4), type B1 cover slab (using 20mm graded stone aggregate) set in cement mortar (1:4) as in manhole cover/drain cover with MS handle complete all as specified and/or as directed by Engr-in-Charge. |
| 55 | Material and labour for mild steel TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending, lapping etc. as required and welding with existing bar complete all as specified and/or as directed by Engr-in-Charge. |
| 56 | Excavating in post holes (or similar holes) in any type of soil each not exceeding 0.5cum, getting out and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and/or as directed by Engr-in-Charge. |
| 57 | M&L for mild steel work conforming to Fe-290 Gde E-165 including embedding in concrete and screwing etc, including securing bolts, posts & struts in fencing, cutting top to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc complete all as specified and as directed by Engr-in-Charge. |
| 58 | Supply only chain link mild steel galvanized fencing, any type or size complete all as specified and/or as directed by Engr-in-Charge. |
| 59 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire. complete all as specified and/or as directed by Engr-in-Charge. |
| 60 | M&L for mild steel screw bolts (machine made) with hexagonal or square head at one and and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but not exc 10cm long and dia of shank 11 to 15mm ccomplete all as specified and as directed by Engr-in-Charge. |
| 61 | M&L for mild steel round bars conforming to Gde I (IS: 432 part-1) 10mm dia and over as stiffners of fencing, cut to length, bent to shape required, including cranking hooking ends complete all as specified and/or as directed by Engr-in-Charge. |
| 62 | Supply and fix for mild steel work such as band, clamps, flat iron fillet for securing wire mesh, straps, ties etc and similar works, fabrication for steel sections conforming to Fe-290 (Grade E-165) including necessary welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated complete all as specified and/or as directed by Engr-in-Charge. |
| 63 | Material and labour for preparation of new or previously untreated steel or iron surfaces not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and/or as directed by Engr-in-Charge. |
| 64 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, conforming to Fe-410 (Grade E-250) quality A drilled for fixing of steel sheeting or other covering. doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) complete all as specified and/or as directed by Engr-in-Charge. |
| 65 | Rolling and consolidation to required gradient and camber of formation surface (in cutting or filling) of roads with 8 to 12 tonne power roller including watering as necessary and consolidating to the required level, gradient or camber, keeping roller wheels wet, if required, filling in hollows and depressions which occur during rolling and provision of water, road roller, drivers, crew, fuel, labour, tools, etc. complete all as specified and/or as directed by Engr-in-Charge. |
| 66 | M&L for soling (or sub base) with broken boulders or quarried stone (spread thickness) 150mm thick, interstices filled, surface formed and each layer rolled separately with 8 to 12 tonne power roller and consolidated to required gradient and camber complete all as specified and/or as directed by Engr-in-Charge. |
| 67 | M&L for 150mm thick (compacted thickness)WBM, in two layers of 75mm each, with coarse aggregate spread, rolled and consolidated each layer separately to gradient and camber required with 8 to 12 tonne power roller complete all as specified and/or as directed by Engr-in-Charge. |
| 68 | M&L for preparing unsurfaced WBM surface by brushing with wire brushes and removing caked mud etc., sweeping with brooms and finally fannning the cleaned surface with mechanical blower to remove all loose dirt and applying evenly a tack coat using paving bitumen (VG-10) @10 Kg per 10 Sqm complete all as specified and/or as directed by Engr-in-Charge. |
| 69 | M&L for premix bituminuous macadam laid/rolled and compacted to required gradient and camber using 8 to 10 tonne power roller consolidated to average thickness 75mm or less using binder content bitumen of grade VG-30@4% by weight of total mix complete all as specified and as directed by Engr-in-charge.Note :-(i) Any variation in binder content on minus side shall be deducted from payment of Rs 50.00 per kg of binder. No adjustment in price shall be made if the variation is on plus side. (ii) The bituminious mix shall be prepaired in hot mix plant and transported to the site in clean vehicle and shall be laid by means of a self- propelled mechanical paver finisher with electronic sensor complete all as specified and/or as directed by Engr-in-Charge. |
| 70 | M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc.,sweeping with brooms and finally formming the cleaning surface with mechanical blower to remove all loose dirt and applying evenly a tack coat using paving bitumen VG-10 @ 5 Kg per 10 Sqm over black top surfaces complete all as specified and/or as directed by Engr-in-Charge. |
| 71 | M&L for laying bituminous premixed semi dense asphaltic concrete 30mm consolidated thickness using 5.5% paving bitumen content (VG-30) and minimum 2% cement as filler by weight of total mix, using hot mix plant and laid with self propelled mechanical paver fixed with electronic sensor and hydraulic controls, rolled and compacted with vibratory power roller to uniform surface with required gradient and camber complete all as specified and/or as directed by Engr-in-Charge.Note :-(i) Semi Dense asphalitc concrete shall be designed as specified and binder content shall be provided as per design mix. (ii) The contractor shall quote his unit rate considering the bitumen content as 5.5%. (iii) Any variation in binder content on minus side shall be deducted from payments at the rate of Rs 50.00 per Kg of binder. (iv) No adjustment in price shall be made if the variation is on plus side. |
| 72 | Supply and laying of sub class B' bricks, laid dry, in trenches for cable protection laid with its longitudinal axis perpendicular to the cable axis complete all as specified and/or as directed by Engr-in-Charge. |
| 73 | Material and labour for sand cushioning with clean dry sand in trenches for cable protection complete all as specified and/or as directed by Engr-in-Charge.Note: Punned thickness only shall be measured and paid. |
| 74 | Supply and fix 50 mm bore galvanised iron pipe \\"light grade\\" for protection of UG cable, laid in trenches/wall/roof/pole/through pipe etc. complete all as specified and/or as directed by Engr-in-Charge. |
| 75 | Cutting hard standing/road for laying of cable/protection pipe not exceeding 30cm wide and not exceeding 30cm deep and making good after laying pipe/cable etc with PCC (1:3:6), type C2, matching with existing road complete all as specified and/or as directed by Engr-in-Charge. |
| 76 | Boring of road for insertion of cable in cable protection Gl pipe of sizes 50mm to 80mm and 1m deep below the normal ground surface for road crossing without damaging the road complete all as specified and/or as directed by Engr-in-Charge. |
| 77 | Supplying, laying, connecting, testing and commissioning of XLPE insulated and PVC sheathed armoured heavy duty UG cable with stranded aluminium conductors 25.0 sqmm x 4.0 core, 1100 Volt grade, laid in trenches/wall/roof/pole/through pipe complete all as specified and/or as directed by Engr-in-Charge.Note:-(i) Pipe and bricks for cable protection and sand cushioning and earth work shall be measured and paid separately. |
| 78 | All as per item No 77 here-in-before, but 16 sqmm 4 core. |
| 79 | Supply, installation, testing & commissioning factory made outdoor type dust and vermin proof LT panel board cubicle double door hinged type comparmentised of suitable size 415 volts, AC 50Hz fabricated of CRCA sheet 3.15 mm thick machine pressed and angle iron frame 40mm x40mm x6mm, grouted in PCC (1:2:4), type B1 (using 20mm graded stone aggregate) powder coated inside and outside complete including 4 pole aluminium busbar of capacity 200 Amps mounted on procelain insulators and enclosed in chamber and connection from incoming and outgoing electric cable with suitable size thimbles/lugs with openable shutters on both side and compresing of the following :-(a) MCCB 100 Amp cap with adjustable thermal release 4 pole of 25KA rapturing capacity - 01 No(b) MCCB FP, 63 Amp 16KA outgoing - 02 Nos(c) MCB TPN 40 Amp 10 KA outgoing - 02 Nos(d) Digital volt meter 0-500 volt with selector switch, Digital Amp meter of capacity 0-300Amp along with selector switch 3xLED type indicator (RYB) 01 Set, CTs 3x SP MCBs of 6 Amp for protection indicator -01 Set. |
| 80 | Material and labour for earthing complete with galvanized earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to Gl strip of size 32x6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth strip protected by and including 40mm dia Gl pipe (light grade), alternate layers of charcoal and salt, including 20 mm bore GI tubing for watering to earth electrode, earth strip connected to test point/ distribution panel /feeder pillar etc. as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1.5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 5 of SSR part-1 and testing on completion complete all as specified and/or as directed by Engr-in-Charge. |
| 81 | M & L for PVC conduit point wiring complete with 1.5 sqmm FRLSH, PVC insulated multi standard copper conductor single core cable 1100 volt grade drawn into non-metallic PVC rigid conduit medium grade of size not less than 20mm bore and conduit accessories fixed on wall, roof etc., and including provn of PVC insulated 1.5 sqmm copper conductor cable for earth continuity and connected to common earth dolly for one, light point controled by one one way 5 Amp switch complete all as specified and/or as directed by Engr-in-Charge. |
| 82 | All as per item No 81 here-in-before, but for one 5 pin socket outlet 05 Amp on independent board. |
| 83 | All as per itern No 81 here-in-before, but for one 15 Amp socket outlet using 2.5 sqmm FRLS copper conductor with 2.5 sqmm, PVC insulated single core cable for earth continuity conductor. |
| 84 | M&L for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade 6 sqmm 2 core all as specified and/or as directed by Engr-in-Charge. |
| 85 | Supply and fix switch piano flush button, single pole, one way 5 Amp all as specified and as specified and/or as directed by Engr-in-Charge. |
| 86 | Supply and fix switch socket combination 2 in 1, 2 and 3 pin 5 Amp flush type all as specified and as specified and/or as directed by Engr-in-Charge. |
| 87 | Supply and fix switch socket combination 5 in 1, multipurpose 5/15 Amps flush type Universal all as specified and/or as directed by Engr-in-Charge. |
| 88 | Supply and fix ceiling rose, 3 terminals, surface bakelite/PVC/Polycarbonate, isolated body to be fixed on wall/ceiling complete all as specified and/or as directed by Engr-in-Charge. |
| 89 | S&F single pole and neutral DB wall mounting type, 240 Volts, 8 Way with 100 Amp rated bus bar, double door suitable for fixing MCB's including connecting etc. complete all as specified and/or as directed by Engr-in-Charge. |
| 90 | S&F MCB SPN 32 Amps 240 volts, 10KA, 'C' curve with connection complete all as specified and/or as directed by Engr-in-Charge. |
| 91 | S&F MCB SP 6 to 32 Amps 240 volts, 10KA, 'C' curve with connection complete all as specified and/or as directed by Engr-in-Charge. |
| 92 | Supply and fix LED tube light fitting, 1 x 18 watt 220 V AC decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of sutiable size from ceiling rose complete all as specified and/or as directed by Engr-in-Charge. |
| 93 | S&F LED street light security light fitting 35 watt, 230 V, AC outdoor type with pressure die cast, aluminum hosing & heat rresistant complete with driver, lamp bracket management in multiple optics complete with IP 65/66 protection complete all as specified and/or as directed by Engr-in-Charge. |
| 94 | Supply and fix vertical TPN DB, 4 way, in double door, 415 volt complete all as specified and/or as directed by Engr-in-Charge. |
| 95 | Supply and fix MCCB 415 VOLT, 36 KA, 4 pole, 160 Amps, complete all as specified and/or as directed by Engr-in-Charge. |
| 96 | Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, including testing on completion (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and/or as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 32 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender