Tender For Annual Maintenance Contract For Street Lights And High Mast For 03 Years At I.A. Malwan, Fatehpur
Tender Value
34.96 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
17 days left
EMD
82600
Bank guarantee accepted
Document Fee
2257
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Fatehpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Maintenance Contract For Street Lights And High Mast For 03 Years At I.A. Malwan, Fatehpur
BOQ
| Sl. No. | Item Description |
| 1 | Charges for maintenance ,proper watch and ward of entire electrical system of Street Light and High Mast Tower,cables,conductors,poles,panels etc and all other available material as per direction of engineer in charge for road lightng in IA to cover the general supervision for execution of work including dismantling and re fixing of all street light of UPSIDA during the period of AMC for 12 months (01 Electrican and 01 Helper) as per complete. |
| 2 | Dismantling & re-grouting of Street liht 12 Tilt/sick bend/STP pole in 1:3:6 ratio cement concrete with stone pad including stranthening of pole by providing additional 04 nNo. Support of 65X65X6mm or higher size MS angle in suitable length with the help of welding/cutting . |
| 3 | Lowring / Lifting of 30/16/12.5 Mtr. High mast lighting system complete in T&P men & material required proper completion of work etc. |
| 4 | S/F of Trailing Cable for High Mast lighting system complete including all T&P men and material required for proper completion of work . |
| 5 | S/Oiling of winch machine for High Mast lighting system complete including all T&P men and material required for proper completion of work . |
| 6 | Supply & Fixing of Male-Femal plug & socket for Hight Mast lighting system complete including all T&P men material required for proper completion of work as complete in all respect. |
| 7 | Painting of S.T.poles and all mountings on it with two coats of aluminium paint with an under coat of red oxide paint on length of the up to 10 m support above the ground level or as per direction of Engineer in charge of work/site including all T&P,men & material for proper completion of work. |
| 8 | S/F of 6 Amp.To 32 Amp. SP MCB (10KA) C curve Cat-B complete in all respect. (1st year =50%, 2nd year=25%, 3rd year=25%) |
| 9 | S/F of 63 Amp. 4Pole MCB (10KA) C curve Cat-B complete in all respect.(1st year =50%, 2nd year=25%, 3rd year=25%) |
| 10 | S/F of heavy duty cadmium plated copper connector with end plate complete in all respects (c) four way connector HKM 100 as per complete. |
| 11 | S/F of ML-4 contactor MDS/L&T make complete including all T&P man and material required for proper completion of work as per complete. |
| 12 | S/F of Astronomical time switch (timer clock) L&T/Siemens/C&S make complete including all T&P men and material required for proper completion of work as per complete(1st year =50%, 2nd year=25%, 3rd year=25%) |
| 13 | Supply and wiring of sub main with 03 No.of 2.5 sq. mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of work as directed E/I as per |
| 14 | Supply and wiring of (3CX1.5sqmm copper wire) for High Mast Lighting system complete including all T&P men and material required for proper completion of work as per directed by Engineer I/C. |
| 15 | Supplying and wiring of 4sq.mm aluminium conductor PVC insulated unsheathed single core cable including all T&P men and material required for proper completion of work as per directed by Engineer I/C. |
| 16 | Dismantaling & Re- Fixing of LED Street Light complete in all respect |
| 17 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 Sq.mm 2 core (Polycab, Grandlay, Gloster, Havells, KEI make) |
| 18 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 25 Sq.mm 3.5 core (Polycab, Grandlay, Gloster, Havells, KEI make) |
| 19 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer- Incharge. 2CX16Sqmm |
| 20 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer- Incharge. 3.5X25Sqmm |
| 21 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 16Sqmm |
| 22 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 25Sqmm |
| 23 | Painting letters (Pole no.) 2.5 cm upto 8.0 cm size complete on street light pole/panel/other electrical properties under UPSIDA including cost of all material men and T&P complete in all respect as per complete. |
| 24 | Supply, sagging, jointing and binding of insulating ACSR weasel consuctor including cost of aluminium tape binding and jointing sleaves etc. complete in all respect. |
| 25 | Supply & erection of \\"D\\" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint . |
| 26 | Supply & fixing of 100 mm x 110 mm shackle insulator /100 mm x 80 mm pin insulator including G.I. Bolts / spindle nuts etc. complete in all respect. |
| 27 | Supply & Fixing of 32 Amp. 415 V metal clad T.P.N. rewireable type switch fuse unit on angle iron bracket complete in all respect. CAT B |
| 28 | Supply & Fixing of 63 Amp. 415 V metal clad T.P.N. rewireable type switch fuse unit on angle iron bracket complete in all respect. CAT B |
| 29 | Supply & fixing of driver suitable for (110 to 130 watt) LED street light / 50 to 200Watt Flood lights as per same makes that’s are installed at site completein all respect . |
| 30 | Supply & fixing of MCPCB with LED & Lance (110 to 130 watt) / 50 to 200Watt Flood lights as per same makes that’s are installed at site completein all respect .(1st year =50%, 2nd year=25%, 3rd year=25%) |
| 31 | Supply & Fixing of Glass suitable for installed (110 to 130 watt) LED street light / 50 to 200Watt Flood lights as per same makes that’s are installed at site completein all respect. (1st year =50%, 2nd year=25%, 3rd year=25%) |
| 32 | Supply & fixing of LDR suitable for installed (110 to 130 watt) LED street light / 50 to 200Watt Flood lights as per same makes that’s are installed at site completein all respect . |
| 33 | Supply & fixing of special protection device (SPD) suitable for (110 to 130 watt) LED street light / 50 to 200Watt Flood lights as per same makes that’s are installed at site completein all respect . |
| 34 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect. CAT AA (1st year =50%, 2nd year=25%, 3rd year=25%)Make Bajaj, Crompton, Phillips, Wipro. |
| 35 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 200Watt. Confirming to IP 66 protection complete in all respect. (1st year =50%, 2nd year=25%, 3rd year=25%) Make Bajaj, Crompton, Phillips, Wipro. |
| 36 | Cost of all material, spares wire fuses,small accessories required for general maint.,cleaning,oiling etc.to keep the entire installation in perfect working order during AMC period complete in all respect. as per complete. |
| 37 | Supply & Laying of 63mm HDPE ISI marked along with all accessories like socket, bend, coupler etc. confirming to IS14930 Part II complete with fitting and cutting , jointing etc in existing trench, including cost of material , labour and T & P. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender