Tender For Maintenance Of Different L.I Schemes Of 58-Panisagar Ac Within Panisagar Rd Block Under Panisagar Water Resource Sub-Division, Panisagar, North Tripura, During The Year 2026-27/ Sh:- Rewinding Of Motor Etc.
Tender Value
9.40 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
0 days left
EMD
18806
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Different L.I Schemes Of 58-Panisagar Ac Within Panisagar Rd Block Under Panisagar Water Resource Sub-Division, Panisagar, North Tripura, During The Year 2026-27/ Sh:- Rewinding Of Motor Etc.
BOQ
| Sl. No. | Item Description |
| 1 | Complete re-winding of 400/440 volt AC 3 phase horizontal motor of different make after taking out of entire burnt copper wire and rewinding the motor with proper gauge of supper enamel copper wire of approved quality , tapping , insulating , varnishing with vernish heating polishing and re-fitting the same as before including carriage of the motor from respective scheme and complete with trial run as per direction of the Engineer-in-charge. a) 20 HP |
| 2 | b)25 HP |
| 3 | Repairing of star-delta starter in/cl supplying of flanger nuts, bolts,magnet coil as per direction of the Engineer-in-charge. |
| 4 | Repairing of pump shaft by welding, polishing etc. complete as per direction of the Engineer-in-charge. |
| 5 | Providing & fitting fixing C.I. Impeller of approved quality for Horizontal pump. |
| 6 | Supplying & fitting fixing manually operated oil immerged starter of approved quality.30HP Osco/BCH Make |
| 7 | Supply & fitting fixing ball bearing of approved quality for pump required during overhaulinga) 6308 Ball bearing (TATA /SKF) |
| 8 | b)6309 Ball bearing (TATA /SKF) |
| 9 | c) 6310 Ball bearing (TATA /SKF) |
| 10 | Supplying & fitting fixing of spare parts for 20/25 HP Horizontal motor. Motor fan. |
| 11 | Dismentalling of motor for vernishing, heating etc. complete in/c reinstallation and making necessary electrical connection with main switch / starter with motor in/c trial run for 10 hrs in two spellcomplete as per direction of Engineer-in-charge. |
| 12 | Supplying & fitting fixing of spare parts for 20/25 HP Horizontalmotor. Terminal plate. |
| 13 | Supplying & fitting fixing of 7/16 Copper Wire with all electrical equipments including trial run etc. complete (ISI Marked) on the pannel board of approved quality. |
| 14 | Supplying and greasing/applying of grease of approved quality as per direction of Engineer-in-charge. |
| 15 | Supplying and fitting fixing of asbestos rope of best quality as per direciton of Engineer-in-charge.10 to 12 mm thick |
| 16 | Hiring charge of welding set of single phase with operating staff and carrying upto the site of work including loading and unloading (both way) complete as per direction of Engineer-incharge. |
| 17 | Complete re-winding of 400/440 volt AC 3 phase vertical submersible motor of different make after taking out of entire burnt copper wire and rewinding the motor with proper gauge of supper enamel insulated copper wire of approved quality , tapping , insulating refitting the same as before including carriage the motor from respective scheme and complete with trial run as per direction of the Engineer-incharge.12.5 HP-22.5 HP |
| 18 | Labour charge of lifting of 5,000 to 20,000 GPH water lubricated vertical submersible pump with motor including column assembly upto 100 feet with heavy duty chain pulley and block as per directionof the Engineer-in-charge. |
| 19 | Labour charge for lowering & fifting fixing of 5,000 to 20,000 GPH water lubricated vertical submersible pump with motor including column assembly upto 100 feet with heavy duty chain pulley and block and making necessary electrical connection with main switch /starter with motor in/c trial run for 10 hrs in two spell complete asper direction of the Engineer-in-charge. |
| 20 | Supplying & fitting fixing of rubber flange washer 6mm thick of approved quality as per direction of the Engineer-in-charge.110 mm dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender