Tender For maintenance Of Pump House Of Different Schemes Of 58- Panisagar A.C Within Panisagar Rd Block Under W.R Sub-Division Panisagar, North Tripura During The Year 2026-27/ Sh:- Repairing Of Li Scheme Pump House.
Tender Value
9.54 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
1 days left
EMD
19083
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance Of Pump House Of Different Schemes Of 58- Panisagar A.C Within Panisagar Rd Block Under W.R Sub-Division Panisagar, North Tripura During The Year 2026-27/ Sh:- Repairing Of Li Scheme Pump House.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge. A) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | B) Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 3 | Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc. complete as per direction of the Engineer-in-charge. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches (not exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All Kinds of soil. |
| 5 | Providing wood work in frame of doors, windows, clerestory windows and other frames, wrought framed and fixed in position. a) Local Teak Wood |
| 6 | Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismemebering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50m etc. complete as per direction of the Engineer-in-charge. |
| 7 | Providing and fixing panelled/or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked bright finished/ black enamelled M.S butt hinges with necessary screws excluding panelling and or glazing, which will be paid for separately but including the wooden beading of 20 X 12 mm for fixing panelling and or glazing as per direction of Engineer-in-Charge. a)Local Teak wood 35 mm thick shutters |
| 8 | Providing corrugated G.S. sheet roofing/ walling inchonfing Vertical/curved surface with polymer coated Jor hooks, biolts and nuts & mm diameter with bitumen and G.I. limpet washers or with G.1. limpet washers filled with white lead and including a cost pif approved steel primer and two coats of approved paint on overlaping of sheets complete (up to any pitch in horizontal/ vertical or curve surface) excluding Sqm the cost of purlin, rafters and trusses and including cutting to size and shape whereever required. 0.63 mm thick with zinc coating not less than 275 gm/sqm |
| 9 | Fabricating and supplying at site of work, steel tublar trusses of M.S pipe conforming to IS specification, complete with purlin, bracing and other necessary fittings such as cleat gusset plate etc of thickness not less than 6.00 mm including applying a primming coat (two or more coats)as per direction of the Engineer-in-Charge and approved standard design. (Member used in trusses as rafter, bottom tie and purlin are of 40.00 mm dia and struts etc are of 20.00 mm dia and bottom runner are of 25.00 mm dia conforming to IS 1239 part-II/1990 light class). One set comprising of 4(four) nos trusses with 6(six) nos. purlin and 4.00 mtr span as per approved drawing and design etc complete excluding nuts & bolts. |
| 10 | Supplying and filling in plinth, under floor, foundation etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- -All work upto plinth level: 1:1.5:3 (1 Cement: 1.5 fine sand: 3 graded well burnt brick aggregate 20 mm nominal size) |
| 12 | 1:4:8 (1 Cement: 4 fine sand: 8 graded well burnt brick aggregate 40 mm nominal size) |
| 13 | First class brick work in foundation and plinth including cost of all materials as required complete:- i) In cement mortar 1:4 (1 cement: 4 fine sand) |
| 14 | 12 mm cement plaster of mix In cement mortar 1: 4(1) cement: 4 fine sand) |
| 15 | Neat cement punning |
| 16 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 fine sand: 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 17 | Hiring charge of welding set of single phase with operating staff and carrying upto the site of work including loading and unloading (both way) complete as per direction of Engineer-incharge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender