Tender For Providing And Fixing Aluminium Windows In Type V And Allied Area In Rcf Colony Chembur Mumbai-400074Notes: 1) Kindly Read All The Pages Of Nit & Special Conditions Before Quoting For This Work. The Party Shall Visit The Site Before Quoting
Tender Value
56.47 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
14 days left
EMD
1.50 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Fixing Aluminium Windows In Type V And Allied Area In Rcf Colony Chembur Mumbai-400074Notes: 1) Kindly Read All The Pages Of Nit & Special Conditions Before Quoting For This Work. The Party Shall Visit The Site Before Quoting To Access The Quantum And Nature Of The Job.
BOQ
| Sl. No. | Item Description |
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 and above in superstructure above plinth level upto floor five level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 2 | Providing and laying in position plain cement concrete of specified grade with trap/granite/quartzite/gneiss metal mixing in concrete mixer including bailing out water, compacting, finishing surface, curing and including the cost of centering and shuttering at all level : Nominal Mix of 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 3 | Providing and laying in position plain cement concrete of specified grade with trap/granite/quartzite/gneiss metal mixing in concrete mixer including bailing out water, compacting, finishing surface, curing and including the cost of centering and shuttering at all level : Nominal Mix of 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) |
| 4 | Providing waterproofing treatment through specialized agencies asper their specifications to the flooring of water closets, bathrooms, kitchen, nahanies, washing places, sanitary blocks etc. by giving INJECTIONS with cement solution with water proofing compound into the floor slab so as to make it consistent, homogeneous and impervious against leakage, seepage etc. The sunk portion shall then be covered with brickbat waterproof coba in 1:5 c.s. of required thickness with necessary gradient for easy flow of water. Finally the floor shall be covered with joint less waterproof cement plaster in 1:3 c.s. 12 mm to 15 mm thick finished rough for receiving tiles. The average thickness of complete treatment shall not be less than 100 mm. The soil pan area will not be deducted. ( After completion of work leakage test shall be carried out after impounding the water for 7 days without any extra cost. The actual treated area will be measured and paid for). |
| 5 | Providing and applying avg 12 mm thk single coat cement sand plaster in cement mortar of mix in ratio of 1:3 (1 cement : 3 fine sand), smooth or as required to receive specified finish or to receive tiles/marble over to correct line, plumb and level to internal faces of walls/ ceilings including providing & fixing in position 150 mm wide 20 gauge GI chicken mesh at junctions of concrete and masonry work and if required apply chemical adhesive to concrete surfaces and scratch coat, necessary scaffolding with all lifts and leads, hacking, watering, curing, etc complete as directed by Engineer In Charge. NOTE: Only river sand shall be used for internal plastering work. |
| 6 | Removing existing door or windows with frame and shutters and making good etc. to the existing surface. |
| 7 | Providing and applying 20 mm thick external sand faced cement plaster upto any height and at all locations in cement mortar proportion specified below in two coats for masonry (except stone masonry) and concrete surfaces including providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding, etc complete as directed By Engineer In Charge |
| 8 | Providing and applying Plaster of Paris punning for avg thickness of 12mm to walls, beams, ceilings, columns in perfect line and level over the base of single coat cement plaster including roughening of existing surface making 6 mm groove at skirting and door, window jamb, sill, lintel, etc. complete or as directed Engineer In-charge/Architect. The rate is exclusive of base coat cement plaster. |
| 9 | Providing and applying one or more coats of approved primer and two/three coats of acrylic plastic emulsion paint of an approved make and colour as per manufacturers specifications to any surface, at all height and locations as directed including scrapping the wall, applying 2/3 coats of putti, including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge./Architect. |
| 10 | Providing and applying first single coat of approved primer and two coats of anti-algal, anti-fungal, exterior paint as specified below of an approved make and colour as per manufacturers specifications to any surface, upto any height from ground level and at all locations as directed including preparing surfaces for painting by any approved means, watering, scaffolding, cleaning and curing etc. complete as directed by Engineer-in-charge. By using acrylic based exterior paint. |
| 11 | Providing and applying two coats of acrylic distemper (Asian Tractor Uno Acrylic Distemper/ Berger Bison Acrylic Distemper/ ICI Acrylic Distemper) of any colour as per manufacturers specifications to any surface, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting with broom and filling cracks or small patches with wall putty (Asian Acrylic wall Putty/ Dulux Interior Wall Putty A500/ Equivalent material in cost and properties) if necessary by any approved means, etc. complete as directed by Engineer-in-charge. |
| 12 | Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint/lustre of an approved make and colour as per manufacturers specifications to all surfaces, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in- charge. )for plastered wall/ wood work/ steel work) |
| 13 | Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for sill and jambs for window/door frames etc. including round nosing/chamfering if required as directed by Engineer In-charge/Architect including preparing the surface and levelling in the desired line, cement mortar 1:3 bedding or backing, cement float, machine cutting, leveling, jointing, smooth cement plastering along the sides to match the existing surface in cement mortar 1:3, filling the joints with neat cement or pigment mixed with cement, finishing, curing etc complete as directed by Engineer In Charge.: 18mm thk. Ruby red, jet black, sparkle black, Hasan green Granite in double patti,width of each patti shall be minimum 150 mm. or as directed by Engineer In-charge/Architect. |
| 14 | Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for sill and jambs for window/door frames etc. including round nosing/chamfering if required as directed by Engineer In-charge/Architect including preparing the surface and levelling in the desired line, cement mortar 1:3 bedding or backing, cement float, machine cutting, leveling, jointing, smooth cement plastering along the sides to match the existing surface in cement mortar 1:3, filling the joints with neat cement or pigment mixed with cement, finishing, curing etc complete as directed by Engineer In Charge.: 18mm thk. green marble in double patti, width of each patti shall be minimum 150 mm. or as directed by Engineer In-charge/Architect. |
| 15 | Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for sill and jambs for window/door frames etc. including round nosing/chamfering if required as directed by Engineer In-charge/Architect including preparing the surface and levelling in the desired line, cement mortar 1:3 bedding or backing, cement float, machine cutting, leveling, jointing, smooth cement plastering along the sides to match the existing surface in cement mortar 1:3, filling the joints with neat cement or pigment mixed with cement, finishing, curing etc complete as directed by Engineer In Charge.: 25 to 30mm thk. Kadappa stone in double patti, width of each patti shall be minimum 150 mm. or as directed by Engineer In-charge/Architect. |
| 16 | Providing and fixing in position two track aluminum window of extruded modular and anodized aluminum sections of approved make and of size 61.85 mm x 45.5 mm x 1.3 mm thk (wt 1.055 kg/Rm) for bottom, 61.85 mm x 31.75 mm x 1.3 mm thk. (wt 0.659 kg/Rm) for top & sides, mounted on anodized aluminum rectangular frame of size 63mm x 38mm x 2.0mm(1.054). The shutter comprising of bearing bottom and top of size 40mm x 18 mm x 1.25 mm thk (wt. 0.417 Kg/Rm) Interlocking section of size 40mm x 26,7 mm x 1.10 mm thk. (Wt. 0469 kg./Rm) and hand sides of 40mm x 18mm x 1.25 mm thk (wt. 0.417kg/Rm) with 5 mm thick plain / frosted / tinted glass fixed in shutter including approved quality neoprene gasket, fixtures, fastenings and accessories like PVC rollers, PVC weep holes, locks, handles etc. complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour) |
| 17 | P& F In position Three Track Alumimium Window of extruded Modular & anodized aluminium section of approved make & size 93mm x 45.5 mm x 1.5mm thk (1.659 kg/Rm) for bottom and 92mm x 31.75 mm x 1.3 mm thk.( wt.0.933 Kg/Rm) For top and sides mounted on anodized aluminium rectangular Frame of size 100mmX 40MMX1.3mm (wt.0.976 Kg/Rm) The shutter comprising of bearing bottom and Top of size 40mmX18mmX1.25mm thk.(wt.0.417 Kg/Rm) interlocking section of size 40mmX26.7mmX1.10mm thk.(wt.0.469 Kg/Rm) & hand sides of 40mmX18mmX1.25mm thk.(wt.0.41 Kg/Rm) with 5mm thick plain/frosted/tinted glass fixed in shutter including approved quality neoprene gasket,fixture,fastening and accessories like pvc rollers,pvc weep holes, locks, handles etc,complete as directed by Engineer In Charge.(Note: anodic Film must not be less than 15 microns i.e AC15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hours) |
| 18 | Providing and fixing in position four track aluminum window of extruded modular and anodized aluminum sections of approved make and of size 122.2 mm x 45.5 mm x 1.3 mm thk (wt 1.829 kg/Rm) for bottom and 122.2 mm x 31.75 mm x 1.2 mm thk. (wt 1.093 kg/Rm) for top and sides mounted on anodized aluminum rectangular frame of size 127mm x 25.4mm x 1.3mm(1.052 kg/m) The shutter comprising of bearing bottom and top of size 40mm x 18 mm x 1.25 mm thk (wt. 0.417 Kg/Rm) Interlocking section of size 40mm x 26.7 mm x 1.10 mm thk. (Wt. 0469 kg./Rm) and hand sides of 40mm x 18mm x 1.25 mm thk (wt. 0.417kg/Rm) with 5 mm thick plain / frosted / tinted glass fixed in shutter including approved quality neoprene gasket, fixtures, fastenings and accessories like PVC rollers, PVC weep holes, locks, handles etc. complete as directedby Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour) |
| 19 | Providing and fixing Stainless Steel Netting 26 B.W.G., 5 to 6 Squares per sq. cm. including beading etc. complete. |
| 20 | Providing and laying 600 x 600 x 8 to 10 mm thk. vitrified tiles as specified below conforming to I.S.15622-2006 with water absorbtion less than 0.08% for flooring of an approved, quality, make and pattern /design for flooring including cement mortar bedding of 25 mm thick in 1:4 proportion, cutting, leveling, jointing, filling the joints by neat cement slurry or approved colour grout, curing, finishing etc complete as directed by Engineer In Charge.:Light/Dark glazed, antiskid/matt tiles |
| 21 | Providing and laying 8mm thk. ceramic tiles as specified below conforming to I.S.15622-2006 for flooring of an approved, quality, make, size and pattern /design, for flooring including cement mortar bedding of 25 mm thick in 1:4 proportion, neat cement float, cutting, leveling, jointing, filling the joints by neat cement slurry or approved colour grout, curing, finishing etc complete as directed by Engineer In Charge.Light/ Dark coloured, anti skid /matt finish etc. |
| 22 | Providing and fixing 8 to 10mm thk. ceramic/vitrified tiles as specified below conforming to I.S. 15622-2006 of approved quality, pattern and colour for dado in the wet/dry area including preparing the surface and levelling in the desired line, backing of 20 thk. cement mortar in porportion 1:3 with approved waterproofing compound, square cut top edge or chamfered top edge in cement mortar 1:3, cement float, machine cutting, leveling, jointing, filling the joints with neat cement slurry or approved colour grout, finishing, curing etc complete as directed by Engineer In Charge.: Light/Dark glazed, antiskid/matt tiles |
| 23 | Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for dado including preparing the surface and levelling in the desired line, backing of 20 thk. cement mortar in porportion 1:3, square cut top edge or chamfered top edge in cement mortar 1:3, cement float, machine cutting, leveling, jointing, filling the joints with neat cement or pigment mixed with cement, polishing, finishing, curing etc complete as directed by Engineer In Charge. 18mm thk. Ruby red, jet black, Hasan green Granite |
| 24 | Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for dado including preparing the surface and levelling in the desired line, backing of 20 thk. cement mortar in porportion 1:3, square cut top edge or chamfered top edge in cement mortar 1:3, cement float, machine cutting, leveling, jointing, filling the joints with neat cement or pigment mixed with cement, polishing, finishing, curing etc complete as directed by Engineer In Charge. 25 to 30mm thk. Kadappa stone. |
| 25 | Providing and fixing in position window of extruded modular aluminium section, anodised, coloured, partly fixed and partly sliding, two track mounted on rectangular tube frame of size 81.25 mm x 38.1 mm x 1.75 mm thk. (wt. 1.093 kg/Rm.) made up of two track drain bottom of size75 mm x 45.5 mm x 1.25 mm thick (wt. 1.073 kg/Rm.) and Two track top & sides of size 75 mm x 25.4 mm x 1.7 mm Thk. (wt. 0.800 kg/Rm.). The shutter bottom & top of size 43 mm x 25 mm x 1.7 mm thick (wt. 0.717 kg/Rm.) interlocking section of 43 mm x 25 mm x 1.70 mm thk. (wt. 0.802 kg/Rm.) and Handle sides of 43mm x 25 mm x 1.7mm thk (wt.0.642 Kg/Rm), selected quality 5.5mm thick clear glass to be fixed in shutter with neoprene gasket with approved quality PVC rollers with ball bearings, necessary locks, handles, PVC lining and wooden encasement wherever necessary etc. complete.All sections shall be of jindal make only. Fixed glass panel shall be assembled with suitable size beading angle 0.90 mm thick (wt.0.124 kg/Rmt). All the gaps in between window frame and sill shall be sealed by approved quality silicon sealant. |
| 26 | Providing and fixing in position aluminum louvered window with anodised,coloured aluminum frame of approved make and of size 40mm x 20mm x 2.0mm (wt. 0.605 kg/Rm) including adjustable aluminum frame, 4 to 6mm thk. frosted glass, fixtures and fastenings etc. complete as directed by by Engineer In Charge. |
| 27 | Extra for providing and fixing 3 mm thk. veneer with three coats of melamine polish instead of synthetic enamel painting including all material and labour. |
| 28 | Extra for Providing and fixing decorative 1.0 mm thick laminate like decolam or formica laminate or any other aproved brand, complete with approved glue etc. |
| 29 | Providing and Fixing MS Safety grill of weight specified below for windows as per design including fabricating the grill using M.S.square/roundbar, flats and angles including painting with one coat of redoxide zinc chromate primer and two coats of synthetic enamel paint of approved colour and brand etc complete as directed. Grill weighing 10 to 15 kg / sqm |
| 30 | Providing and fixing best quality C.P.Teak wood frame for doors, windows and ventilators size greater than 50mmx50mm including intermittent supports if required, all moulding, rebating, jointing, hold fasts of MS flats of minimum size 25x3mm,having length of 225mm for doors &150mm for windows and finishing with 3 coats of French polish or one coat of primer and synthetic enamel paint in two coats as directed etc. complete as directed. |
| 31 | Providing and fixing superior quality factory made single or double leaf Phenol Bonded solid core flush door shutters commercial type hot pressed conforming to IS:2202(PartI,II) 1991 including 12mm thk teak wood lipping all around with one coat of primer, putty and 2 coats of synthetic enamel paint on both faces etc. complete as directed. (Hinges, aldrop & standard door hardware to be paid separately) 35mm thick shutter |
| 32 | Providing and fixing 38mm x 12mm thick teak wood decorative cover moulding around frame of doors, windows and cupboards etc. completed as directed. |
| 33 | Providingand fixing 38mm x 20mmthick teak wood decorative cover moulding around frame of doors, windows and cupboards etc. completed as directed. |
| 34 | P & F 18mm thick ply wood for furniture work etc. |
| 35 | P & F 12mm thick ply wood for furniture work etc. |
| 36 | P & F 8 to 10mm thick ply wood for furniture work etc. |
| 37 | P & F 4mm thick ply wood for furniture work etc. |
| 38 | P & F with new teak beading 12mm square |
| 39 | Providing and fixing aluminium framed door with hardner Laminated sheet 4mm thick (Bakelite composite panel) with outer aluminium frame of size A-section 50mmx20mmx1.5mm (Wt.0.571kg/M) using heavy duty steel hinges100mm, aluminium handle125mm, aluminium tadi200mm, alu. tower bolt100mm etc. complete. |
| 40 | Glazing with best sheet glass 4 mm thick 6.5 to 7.5kg etc |
| 41 | Glazing with best sheet glass 5mm thick etc. |
| 42 | Disposal of debris / building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including stacking at designated place around Admin Building, sorting, loading, transporting, unloading to approved Location within RCF premises preferably inside RCF Factory area or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved. (NOTE : Necessary permissions shall obtained by the contractor before starting disposal work.) |
| 43 | Supply of Un Skilled workers including tools and tackles for odd and unmeasurable jobs for 8 Hrs. |
| 44 | Supply of Skilled workers including tools and tackles for odd and unmeasurable jobs for 8 Hrs. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender