Tender For Construction Of 33 Kv S/S Bldg With Boundary Wall At Badwaskala, Pratapgarh (R/W)
Tender Value
15 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
14 days left
EMD
30000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pratapgarh → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 33 Kv S/S Bldg With Boundary Wall At Badwaskala, Pratapgarh (R/W)
BOQ
| Sl. No. | Item Description |
| 1 | Building Works |
| 2 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 3 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 4 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 5 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix |
| 6 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 7 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 8 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 6 (1 cement : 6 coarse sand)Add extra providing and placing in position 2 Nos. ,6mm Ø M.S. bar at every third course of half brick masonry . |
| 9 | Add extra pillar masonry including bed plates as per specification, (Bed plates to be paid separately) |
| 10 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.M20 grade Nominal Mix / Design Mix |
| 11 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)Hot rolled deformed bars (IS : 1139). |
| 12 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :Windows side hung /Ventilators top or centre hung (openable) |
| 13 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. |
| 14 | Providing and fixing Square bars or other flat welded to window, ventilatiors etc. |
| 15 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 16 | Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification : |
| 17 | Grading roof for water proofing treatment with water proffing compoundCement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 18 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 19 | Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges :Kota stone minimum 30mm thick. |
| 20 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. |
| 21 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75mm thick with 20mm thick nominal size aggregate. |
| 22 | 50mm thick |
| 23 | Providing & fixing ms sheet single leaf door shutters in angle iron frame 35x35x5 mm suitablly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5 mm beading extra including all fittings, as per direction of engg, incharge but excluding coes of chokhats including two coats of anti corrastie red oxide primer paint Ms sheet 20 SWG |
| 24 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' :Commercial Veneer both side |
| 25 | Double Leaf |
| 26 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). |
| 27 | Making grooves as per design in plaster 10mm to 20mm wide. |
| 28 | 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand) : Moulded band. |
| 29 | P & F rigid PVC pipe (IS:4985 MARK) Class II/ (4 Kg./ c,2) approved quantity/ make including jpining the pipe with solvent cement rubber ring and lubricant (A) 110 mm dia |
| 30 | Providing and fixing Nigeria / Ghana /Ivory Coast Teak wood grade-I mouldings and beadings in doors and windows size :-25x12 mm |
| 31 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: |
| 32 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:New work (two or more coats) over and including scrapping and priming coat with cement primer. |
| 33 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: |
| 34 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 35 | Filling in plinth with locally available river shingle under floors including watering ramming consolidating and dressing complete including cost of shingles sand. |
| 36 | Random rubble dry stone Kharanja under floor. |
| 37 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 38 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 39 | M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 40 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 5 km , disposed earth to be levelled and neatly dressed in All kinds of Soil |
| 41 | Providing and fixing fine dressed machine cut approved sand stone steps (riser and treads) in CM 1:4 including pointing the joints with white cement mortar 1:2 with admixture of matching the stone shade with width of steps 1200 mm :50 mm thick |
| 42 | Water Supply & Sanitary work (Part B) |
| 43 | Note:- No payment shall be done for faliure/unsuccessfull/Dry Bore |
| 44 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm. |
| 45 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :Size 550 mm x 400 mm |
| 46 | P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make :Brass / Gun metal Half-turn wt. 1 Kg. of approved quality / make, 25mm nominal bore. |
| 47 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 15mm nominal bore. |
| 48 | P & F Full-way valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 25 mm nominal bore. |
| 49 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity |
| 50 | P & F Grating of approved quality/make:Stainless Steel Sheet size 125mm dia. |
| 51 | P & F 15 mm Dia connection pipe of approved quality/ make: -do- up to length 370 mm |
| 52 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:C.P. Brass bib cock,15 mm nominal bore. |
| 53 | P & F Stop Cock (IS :8931 Mark), superior quality & of approved make:Brass 400 gm. 15mm nominal bore. |
| 54 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :Brass wt. Not less than 300 gm,15mm. |
| 55 | P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors:15 mm dia nominal bore 'B' Class |
| 56 | 25 mm Dia 'B' Class |
| 57 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.15mm dia nominal bore |
| 58 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.25mm dia nominal bore |
| 59 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.75 mm dia |
| 60 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110 mm dia |
| 61 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M |
| 62 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. |
| 63 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: |
| 64 | Bend 45 |
| 65 | Bend 87.5 |
| 66 | P & F Gun-metal Non-return Valve or Check Valve (IS : 778 Make) of approved make, superior quality:25mm nominal bore. Vertical |
| 67 | Making connection of G.I. distribution branch with G.I. main including all fitting. |
| 68 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C floor & RCC slab covering with M15 grade c.c. floor, 50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-Size 200x100x130 cm.(for 10 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 8mm ϕ @15 cm c/c bothways including shuttering complete in all respect |
| 69 | Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.:Size 240 Cm. dia outside & 240 Cm. depth. |
| 70 | P & F kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mmG.I. waste pipe up to floor level complete including cutting and making good the wall & floor : Size 24x18x8 |
| 71 | Construction of tube-well upto 100 Meter depth and above in all types of rock by dth system and over burden to accomodate casing pope of following sizes in all types of soils and over burden including lowering of casing pipes, but excluding cost of casing pipes as per IS:2800(Part-I & II) 1979 specifications The work would be completed after obtaining sand free water.The tube well should have a throughout bore as per nominal dia of casing pipe : 150 mm dia Nominal bore. |
| 72 | Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work.150 mm Nominal bore of pipe |
| 73 | S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. |
| 74 | S & F tube well cover of M.S.sheet (6mm thick) with nuts and bolts complete for casing size:150mm dia |
| 75 | Electric work (Part C) |
| 76 | Wiring for light point/fan point/exhaust fan/call bell point with 1.5 Sq.mm FR P.V.C. insulated unsheathed 1.1 KV grade flexible copper conductor and 1.5 sq. mm FR PVC insulated copper earth conductor (IS:694 of approved make double lock/ISI marked single lock PVC casing capping and it's accessories 18 SWG box with earht termal screwless cage connectors for neutral looping in switch board & falce celling point 6A switch, 3.0mm thick phenolic laminated screws, cup washers making connections testing etc. as required. Group 1(A) short point (up to 3 mtr.) |
| 77 | (B) Medium point (up to 6 mtr.) |
| 78 | Long point (upto 10mtr.) |
| 79 | Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed 1.1 kV grade flexible copper conductor and 1.5 sq.mm nominal size FR PVC insulated unsheathed 1.1 kV grade copper earth conductor (IS:694) of approved make double lock/ ISI marked single lock pvc casing capping & it's accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & falce ceiling point, 6 A switch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. on board Group 1 |
| 80 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS: 694) of 1.1 Kv grade and approved make in existing surface or recessed conduit casing capping including making connection etc. as required 1x1.5 sq.mm Group 1 |
| 81 | 2x4.0 sq.mm |
| 82 | P & F surface/recessed type 10 mm thick Teak wood board duly antitermite treated, varnished and fixed by using gutties/ PVC fasteners of following size as required. 300 mm x 375 mm Group 1 |
| 83 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 84 | P & F IP-43 protected street light luminiare on existing bracket suitable for FTI., made out from CRCA sheet steel finished with stove enameled paint, having deep drawn aluminium alloy canopy reflector cum control gear tray, clear ribbed acrylic diffuser held with synthetic gasket, with all necessary accessories copper wound ballast, capacitor, starter, holder prewired with pvc insulated copper conductor including making connection testing etc. as required. (without tube) 1x36 watts |
| 85 | P&F Fluorsent tube rod in existing fixtures as required 36/40 watts |
| 86 | S & L following size A class G.I. Pipe witth accessories for laying earth conductors strip in ground surface recess as required 32 m dia |
| 87 | S & Laying following size earth wire strip in horizontal of vertical run in ground. Surface recess including riveting, soldering, saddles, making connection etc. as required, 8 SWG G.I Wire |
| 88 | P&F 18 SWG M.S recessed fan box hexagonal round of size 130 mm dia, depth 75 mm 12 mm dia rod fan hook with 100 mm length extended on Each side |
| 89 | P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections with lugs , testing etc. as required. 63 A rating |
| 90 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with 100 A copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. 6&8 Way Group 1 |
| 91 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. 6A to 32 A rating cat-1 |
| 92 | P & F strip type fluorscent tube fitting fabricated from (CRCA sheet and finished with powder coating / stove enamelled paint)/ (extruded non corrosive UV resist EP Channel) complete with accessories (Low loss copper choke with terminal block duly prewired with copper conductor including making connection, testing etc. as required (without tube) 1x28 watts with EB |
| 93 | Providing and synthetic rode for submersible pump ISI marked (IS:5175) of floowing sizes 12 mm (suitable up to 50 mm OD) |
| 94 | Supply and installation of submersible motor pump sets ISI marked (Is:8034-1989) of approved make with required accessories including making connection suitable for T.W./D.C.B./ Open well. The job includes lowering of riser pipe G.I./ H.D.P.E. pipe with rope, cables, installation of complete fitting and accessories, jointing of electric cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect, 1.5 HP Lo (50-130) mtr. (46-18)LPM |
| 95 | Providing of HDPE pipe ISI marked (IS:4984/95) For water supply/suitable for submersible & jet pump with required fittings 40 mm OD (32 mm ID)6 Kg/Cm |
| 96 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required 4.0 Sq. mm 3 core flat. |
| 97 | Supply and fixing of oil/Air break starter panel made out of sheet steel power coated enclosure comprising of over load protection reay, short circuit & single proctection, ON/OFF push buttons ammeter, voltmeter, indicating lamps etc complete in all respect suitable for following 63 a rating moters, 0.5 HP to 3HP Group 1 |
| 98 | Wiring for sub mains ISI marked (IS:694) 1100 volts grade PVC insulated twin core sheathed solid aluminium condector clipped etc, as required, 6.0 sq.mm group-1 |
| 99 | P& F double ball bearing capacitor start, aluminium body & blade celling fan with down rod up to 30 cm with 3X1.5 sq mm PVC insulated flexible copper conductor making connection testing etc. as required. 1200 mm sweep Group-1 |
| 100 | Item Rate |
| 101 | Supply ,stacking and spreading 40mm crusher broken hard stone aggregate free from katcha stuff deleterious and organic matter as per IRC.MORTH standard specification in 33/11Kv Sub-station yard as per direction of Engineer incharge with all lead and lift. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender