Housing Urban and Rular Development Government Departments Closing in 5 days TDR #57904217

Tender For Bondriwall And Beautification Work Of Dr. Bhimrao Ambedkar Statue Site In Gram Panchayat Shivur Under Mehnagar Development Block Of Legislative Assembly Mehnagar.

Issued by Government Departments · Azamgarh, Uttar Pradesh
Tender Value
8.50 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
5 days left
EMD
85000
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Azamgarh → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Bondriwall And Beautification Work Of Dr. Bhimrao Ambedkar Statue Site In Gram Panchayat Shivur Under Mehnagar Development Block Of Legislative Assembly Mehnagar.

BOQ

Name of Work:- vidhan sabha mehnagar vikas khand mehnagar ke antargat gram panchayat shivr ur mein Dr bhimrao ambedkar murti sthal ke bounndriwal evam soundaryikaran ka karya
Sl. No. Item Description
1Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared as per DSR 2.32
2Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
3Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.
4\\"Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)\\"
5Reinforced cement concrete work in beams, suspended floors, roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Below Plinth
6Reinforced cement concrete work in beams, suspended floors, roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Above Plinth
7Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete
8Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
9Brick Work with common burnt clay ( non modular) bricks of class - 150 in foundation and plinth in: Cement mortar 1:6 ( 1 cement : 6 coarse sand)
1012 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
11Finishing walls with Putty approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work.
12Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
13Construction of granular sub-base by providing well graded material GSB as per analysis
14Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 16.91.2 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern
15Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red
16Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates efc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
17Supply and fixing of balaji RCC seating Bench all complete
18Supply and fixing of solar painal 180WP PV module battery 12.8v/75AH 30W white light emitting diode (W L.E.D) 6.00 mtr. Pole mounted dusk to dawn
19S/F granite stone sheet with letter writing etc complete
20Electrification Etc Work
21Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class - 150 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
22Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
23Painting or varnishing or iron works in small areas with one coat of ready mixed in priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of work paint to be used should confirm to the I.S.I. No. 103 1950 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57904217
AUTHORITY Government Departments
TENDER VALUE 8.50 Lakhs
LAST DATE 15-10-2026
Authority
Authority Name Public Works Department
Work Description Tender for Bondriwall And Beautification Work Of Dr. Bhimrao Ambedkar Statue Site In Gram Panchayat Shivur Under Mehnagar Development Block Of Legislative Assembly Mehnagar.
Basic Detail
Tender No 2686/14A Date 29-09-2026
Bidding Type Tender
Location
City Azamgarh
State Uttar Pradesh
Key Dates
Publish Date 07 Oct 2026
Submission Date 15 Oct 2026
Open Date 15 Oct 2026
Finance
Tender Value 8.50 Lakhs
Tender Fee 944
EMD 85000
Exemption Available
Document List
96d1407e-a8f7-44b7-8b6d-fa362dcb4a74.html
BOQ_2253459.xls
T1ofCD.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 15, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Oct 15, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

96d1407e-a8f7-44b7-8b6d-fa362dcb4a74.html

xls

BOQ_2253459.xls

pdf

T1ofCD.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders