Tender For Reconstruction Of Ledge For Godown At State Warehouse Choondy Aluva In Ernakulam District.
Tender Value
3.46 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
13 days left
EMD
8700
Bank guarantee accepted
Document Fee
826
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Reconstruction Of Ledge For Godown At State Warehouse Choondy Aluva In Ernakulam District.
BOQ
| Sl. No. | Item Description |
| 1 | Ledge repair worksDemolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Enginneer - in -charge |
| 2 | Dismantling existing wooden fenders up to 50 metres span and 2 metres height including stacking the material within 50 metres lead: of sectional area 40 square centimetres and above |
| 3 | Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) including cost and conveyance of all materials, labour charges, etc. complete as required. |
| 6 | Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) including cost and conveyance of all materials, labour charges, etc complete. |
| 7 | Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform including cost and conveyance of all materials, scaffolding charges labour charges, etc. complete as required. |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources) including cost and conveyance of all materials, labour charges, scaffolding etc. complete as required. |
| 9 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) including cost and conveyance of all materials, labour charges, etc. complete as required. |
| 10 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 11 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) including all cost and conveyance of all materials, labour charges, scaffoldings, etc complete |
| 12 | 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost and conveyance of all materials, labour charges, scaffoldings, etc complete |
| 13 | Providing 16mm dia L bolts for fixing the C channel as fender to the bottom ledge with M.S rod 50 cm long including charges for supplying nuts, threading,bending and pacing in position as per instruction during execution including cost conveyance of all materials, labourcharges etc. complete |
| 14 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand). Including cost conveyance of all materials, labour charges, scaffoldings etc. complete as per directions from the Engineer in charge. |
| 15 | Structural steel in single section fixed with or without connecting plate including cutting, hoisting, fixing in position by using C Channel size 150x100x5mm and applying a priming coat of approved steel primer all complete.as per direction of Engineer in charge. |
| 16 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications after preparing the surface by using wirebrush or emery paper , including appropriate priming coat, preparation of surface, etc. complete.On steel work. All works including cost and conveyance of all materials, labour charges, scaffolding etc. complete as required. |
| 17 | Applying two coat of water thinnable cement primer of approved brand and manufacture on wall surface after preparing the surface by using wirebrush or emery paper. All works including cost and conveyance of all materials,labour charges, scaffolding etc. complete as required. |
| 18 | Engaging coolies for dismantling, clearing debris, repair and clearing the area as per direction from the Engineer in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender