Tender For Construction Of Multipurpose Community Center On The Back Side Of Sri Sidhi Vinayak Temple At Forest Colony In Ward No.03,Baripada
Tender Value
3.62 Crore
Estimated cost
Bid Submission
31 Oct 2026
2 days left
EMD
3.62 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mayurbhanj → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Multipurpose Community Center On The Back Side Of Sri Sidhi Vinayak Temple At Forest Colony In Ward No.03,Baripada
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Oct-2026 | Critical Dates Changed | Date | 31-Oct-2026 |
| 2 | 16-Oct-2026 | Class of Tender | Technical Bid | 23-Oct-2026 |
| 3 | 16-Oct-2026 | Class of Tender | Technical Bid | 31-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORK (FOUNDATION) |
| 2 | Double under reamed pile foundation with R.C.C M-25 using 12mm size b.h.g.c.b. chips including cost of Boring but Boring but excluding cost of M.S/Tor Steel and labour charges for cutting, bending and binding of steel all comp. |
| 3 | Earthwork in foundation & plinth trenches within 50mtr initial lead, 1.5m initial lift including rough dressing and breaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per direction of the Engineer-in-charge (Un |
| 4 | Providing filling foundation and plinth with sand well watered and rammed with rammer including cost of all materials and labour T & P etc complete. |
| 5 | Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge |
| 6 | Cement concrete(1:3:6 ) using 40 mm size B.H.G C.B chips laying in layers niot exceeding 150mm ramming in rammer,watering and curing etc. |
| 7 | Providing, lifting, hoisting and laying Reinforoad Comer Concrsis of M-25 grade in Column base, Column Footings, Raft Foundation,Stem of the Columns, beams, chaujja, fin, lintel, stair Case, jali , shelves and slab etc as per approved designs and drawings |
| 8 | Plinth Beam |
| 9 | Cutting, Straightening coiled or bent up M.S plain HYSD/TMT reinforcement bars welding or| jointing if necessary bending,binding,tying the grills as required for R.C.C works,providing fan hooks where necessary and hoisting, lowering and placing in proper |
| 10 | 2.5cm thick AS Flooring with C.C.(1:2:4) incl. punning using 12mm size CBHG chips (Unit-1 sqm) |
| 11 | GROUND FLOOR |
| 12 | Earthwork in foundation & plinth trenches within 50mtr initial lead, 1.5m initial lift including rough dressing and breaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per direction of the Engineer-in-charge (Unit-100 cum) |
| 13 | Providing filling foundation and plinth with sand well watered and rammed with rammer including cost of all materials and labour T & P etc complete. |
| 14 | Cement concrete(1:3:6 ) using 40 mm size B.H.G C.B chips laying in layers niot exceeding 150mm ramming in rammer,watering and curing etc. |
| 15 | Fly-Ash Brick masonary with c.m (1:6) in Super structure using Fly-Ash Bricks 250 x 120 x 80mm size watering ,curing etc complete including cost of materials, labour all comp.complete as per the direction of Engineer-In-Charge |
| 16 | Fly-Ash Brick masonary with c.m (1:4) in Super structure using Fly-Ash Bricks 190 x 120 x 80mm size watering ,curing etc complete including cost of materials, labour all comp.complete as per the direction of Engineer-In-Charge |
| 17 | Providing, lifting, hoisting and laying Reinforoad Comer Concrsis of M-25 grade in Column base, Column Footings, Raft Foundation,Stem of the Columns, beams, chaujja, fin, lintel, stair Case, jali , shelves and slab etc as per approved designs and drawings |
| 18 | Lintel Beam |
| 19 | Wall Beam |
| 20 | Stair Case |
| 21 | Roof Slab |
| 22 | Cutting, Straightening coiled or bent up M.S plain HYSD/TMT reinforcement bars welding or| jointing if necessary bending,binding,tying the grills as required for R.C.C works,providing fan hooks where necessary and hoisting, lowering and placing in proper |
| 23 | 16mm thick cement plaster (1:6) on brick work inside wall including all cost conveyance royalty & taxes etc, to work site as per direction of Engineer-In-Charge |
| 24 | Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to out, Side smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface Smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required omamental finish as per drawing, watering, curing, Scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all Jabour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge |
| 25 | 6mm thick cement plaster (1:4) over R.C.C surface including all cost and conveyance, royalty, taxes of all materials etc.complete as directed by the Engineer in Charge. |
| 26 | Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints of approved qualiy including cost |
| 27 | Fixing tiles in dados,skirtings & risers of steps on 12mm.th.C.P(1:3) jointed with neat cement slurry etc.complete in all respect. wall TILES,GLAZED TILES,GRANITES & CHEQURED TILES etc. not requiring rubbing) |
| 28 | Fixing tiles in floor,treads &landing on 25mm.th.bed of CM(1:1) jointed with neat cement slurry etc.complete in all respect. (MARBLE TILE etc.requiring rubbing) |
| 29 | Providing and Painting wall Surface one coat with Wall Primer to give an even shed before applying weather coat to Exterior walls including cost of Primer , labour, T&P all comp. |
| 30 | Wall painting 2 coats with weather coat over a coat of primer to inside and out side smooth surface with all cost of labour, T&P material etc complete. |
| 31 | Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 32 | Wall painting two coats with Plastic emulsion paints over a coat primer of approved shade including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C. |
| 33 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 34 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 35 | Water Proofing |
| 36 | Dressed Seasoned Salwood work Framed fixed in choukhats for doors , windows and Ventilators including all comp. |
| 37 | 32MM THICK Piasal wood or local teak wood pannelled shutters moulded panels with all labour, iron fittings,wooden cleats etc |
| 38 | FIRST FLOOR |
| 39 | Fly-Ash Brick masonary with c.m (1:6) in Super structure using Fly-Ash Bricks 250 x 120 x 80mm size watering ,curing etc complete including cost of materials, labour all comp.complete as per the direction of Engineer-In-Charge |
| 40 | Fly-Ash Brick masonary with c.m (1:4) in Super structure using Fly-Ash Bricks 190 x 120 x 80mm size watering ,curing etc complete including cost of materials, labour all comp.complete as per the direction of Engineer-In-Charge |
| 41 | Providing, lifting, hoisting and laying Reinforoad Comer Concrsis of M-25 grade in Column base, Column Footings, Raft Foundation,Stem of the Columns, beams, chaujja, fin, lintel, stair Case, jali , shelves and slab etc as per approved designs and drawings |
| 42 | Lintel Beam |
| 43 | Wall Beam |
| 44 | Stair Case |
| 45 | Roof Slab |
| 46 | Cutting, Straightening coiled or bent up M.S plain HYSD/TMT reinforcement bars welding or| jointing if necessary bending,binding,tying the grills as required for R.C.C works,providing fan hooks where necessary and hoisting, lowering and placing in proper |
| 47 | 16mm thick cement plaster (1:6) on brick work inside wall including all cost conveyance royalty & taxes etc, to work site as per direction of Engineer-In-Charge |
| 48 | Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to out, Side smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface Smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required omamental finish as per drawing, watering, curing, Scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all Jabour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge |
| 49 | 6mm thick cement plaster (1:4) over R.C.C surface including all cost and conveyance, royalty, taxes of all materials etc.complete as directed by the Engineer in Charge. |
| 50 | Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints of approved qualiy including cost |
| 51 | Fixing tiles in dados,skirtings & risers of steps on 12mm.th.C.P(1:3) jointed with neat cement slurry etc.complete in all respect. wall TILES,GLAZED TILES,GRANITES & CHEQURED TILES etc. not requiring rubbing) |
| 52 | Fixing tiles in floor,treads &landing on 25mm.th.bed of CM(1:1) jointed with neat cement slurry etc.complete in all respect. (MARBLE TILE etc.requiring rubbing) |
| 53 | Providing and Painting wall Surface one coat with Wall Primer to give an even shed before applying weather coat to Exterior walls including cost of Primer , labour, T&P all comp. |
| 54 | Wall painting 2 coats with weather coat over a coat of primer to inside and out side smooth surface with all cost of labour, T&P material etc complete. |
| 55 | Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 56 | Wall painting two coats with Plastic emulsion paints over a coat primer of approved shade including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C.. |
| 57 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 58 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 59 | Dressed Seasoned Salwood work Framed fixed in choukhats for doors , windows and Ventilators including all comp. |
| 60 | 32MM THICK Piasal wood or local teak wood pannelled shutters moulded panels with all labour, iron fittings,wooden cleats etc |
| 61 | SECOND FLOOR |
| 62 | Fly-Ash Brick masonary with c.m (1:6) in Super structure using Fly-Ash Bricks 250 x 120 x 80mm size watering ,curing etc complete including cost of materials, labour all comp.complete as per the direction of Engineer-In-Charge |
| 63 | Fly-Ash Brick masonary with c.m (1:4) in Super structure using Fly-Ash Bricks 190 x 120 x 80mm size watering ,curing etc complete including cost of materials, labour all comp.complete as per the direction of Engineer-In-Charge |
| 64 | Providing, lifting, hoisting and laying Reinforoad Comer Concrsis of M-25 grade in Column base, Column Footings, Raft Foundation,Stem of the Columns, beams, chaujja, fin, lintel, stair Case, jali , shelves and slab etc as per approved designs and drawings |
| 65 | Lintel Beam |
| 66 | Wall Beam |
| 67 | Stair Case |
| 68 | Roof Slab |
| 69 | Cutting, Straightening coiled or bent up M.S plain HYSD/TMT reinforcement bars welding or| jointing if necessary bending,binding,tying the grills as required for R.C.C works,providing fan hooks where necessary and hoisting, lowering and placing in proper |
| 70 | 16mm thick cement plaster (1:6) on brick work inside wall including all cost conveyance royalty & taxes etc, to work site as per direction of Engineer-In-Charge |
| 71 | Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to out, Side smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface Smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required omamental finish as per drawing, watering, curing, Scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all Jabour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge |
| 72 | 6mm thick cement plaster (1:4) over R.C.C surface including all cost and conveyance, royalty, taxes of all materials etc.complete as directed by the Engineer in Charge. |
| 73 | Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints of approved qualiy including cost |
| 74 | Fixing tiles in dados,skirtings & risers of steps on 12mm.th.C.P(1:3) jointed with neat cement slurry etc.complete in all respect. wall TILES,GLAZED TILES,GRANITES & CHEQURED TILES etc. not requiring rubbing) |
| 75 | Fixing tiles in floor,treads &landing on 25mm.th.bed of CM(1:1) jointed with neat cement slurry etc.complete in all respect. (MARBLE TILE etc.requiring rubbing) |
| 76 | Providing and Painting wall Surface one coat with Wall Primer to give an even shed before applying weather coat to Exterior walls including cost of Primer , labour, T&P all comp. |
| 77 | Wall painting 2 coats with weather coat over a coat of primer to inside and out side smooth surface with all cost of labour, T&P material etc complete. |
| 78 | Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 79 | Wall painting two coats with Plastic emulsion paints over a coat primer of approved shade including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C.. |
| 80 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 81 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 82 | Dressed Seasoned Salwood work Framed fixed in choukhats for doors , windows and Ventilators including all comp. |
| 83 | 32MM THICK Piasal wood or local teak wood pannelled shutters moulded panels with all labour, iron fittings,wooden cleats etc |
| 84 | Supplying,fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia.of 2mm.thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr.C/C and stain-less squre pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification,buffing,polishing etc.with cost,conveyance,taxes of all materials,labour,T&P etc.required for the work complete in all respect.(As per AR 2006 & 2012) |
| 85 | THIRD FLOOR |
| 86 | Fly-Ash Brick masonary with c.m (1:6) in Super structure using Fly-Ash Bricks 250 x 120 x 80mm size watering ,curing etc complete including cost of materials, labour all comp.complete as per the direction of Engineer-In-Charge |
| 87 | Fly-Ash Brick masonary with c.m (1:4) in Super structure using Fly-Ash Bricks 190 x 120 x 80mm size watering ,curing etc complete including cost of materials, labour all comp.complete as per the direction of Engineer-In-Charge |
| 88 | Providing, lifting, hoisting and laying Reinforoad Comer Concrsis of M-25 grade in Column base, Column Footings, Raft Foundation,Stem of the Columns, beams, chaujja, fin, lintel, stair Case, jali , shelves and slab etc as per approved designs and drawings |
| 89 | Lintel Beam |
| 90 | Wall Beam |
| 91 | Stair Case |
| 92 | Roof Slab |
| 93 | Cutting, Straightening coiled or bent up M.S plain HYSD/TMT reinforcement bars welding or| jointing if necessary bending,binding,tying the grills as required for R.C.C works,providing fan hooks where necessary and hoisting, lowering and placing in proper |
| 94 | 16mm thick cement plaster (1:6) on brick work inside wall including all cost conveyance royalty & taxes etc, to work site as per direction of Engineer-In-Charge |
| 95 | Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to out, Side smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface Smooth using wooden float only t |
| 96 | 6mm thick cement plaster (1:4) over R.C.C surface including all cost and conveyance, royalty, taxes of all materials etc.complete as directed by the Engineer in Charge. |
| 97 | Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints of approved qualiy including cost |
| 98 | Fixing tiles in dados,skirtings & risers of steps on 12mm.th.C.P(1:3) jointed with neat cement slurry etc.complete in all respect. wall TILES,GLAZED TILES,GRANITES & CHEQURED TILES etc. not requiring rubbing) |
| 99 | Fixing tiles in floor,treads &landing on 25mm.th.bed of CM(1:1) jointed with neat cement slurry etc.complete in all respect. (MARBLE TILE etc.requiring rubbing) |
| 100 | Providing and Painting wall Surface one coat with Wall Primer to give an even shed before applying weather coat to Exterior walls including cost of Primer , labour, T&P all comp. |
| 101 | Wall painting 2 coats with weather coat over a coat of primer to inside and out side smooth surface with all cost of labour, T&P material etc complete. |
| 102 | Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 103 | Wall painting two coats with Plastic emulsion paints over a coat primer of approved shade including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C.. |
| 104 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 105 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 106 | Dressed Seasoned Salwood work Framed fixed in choukhats for doors , windows and Ventilators including all comp. |
| 107 | 32MM THICK Piasal wood or local teak wood pannelled shutters moulded panels with all labour, iron fittings,wooden cleats etc |
| 108 | Supplying,fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia.of 2mm.thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr.C/C and stain-less squre pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stairc |
| 109 | TERRACE FLOOR |
| 110 | Brick work (1:6) with fly ash bricks etc.complete. |
| 111 | Providing, lifting, hoisting and laying Reinforoad Comer Concrsis of M-25 grade in Column base, Column Footings, Raft Foundation,Stem of the Columns, beams, chaujja, fin, lintel, stair Case, jali , shelves and slab etc as per approved designs and drawings |
| 112 | Lintel Beam |
| 113 | Wall Beam |
| 114 | Roof Slab |
| 115 | Cutting, Straightening coiled or bent up M.S plain HYSD/TMT reinforcement bars welding or| jointing if necessary bending,binding,tying the grills as required for R.C.C works,providing fan hooks where necessary and hoisting, lowering and placing in proper |
| 116 | 16mm thick cement plaster (1:6) on brick work inside wall including all cost conveyance royalty & taxes etc, to work site as per direction of Engineer-In-Charge |
| 117 | Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to out, Side smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface Smooth using wooden float only t |
| 118 | 6mm thick cement plaster (1:4) over R.C.C surface including all cost and conveyance, royalty, taxes of all materials etc.complete as directed by the Engineer in Charge. |
| 119 | Providing and Painting wall Surface one coat with Wall Primer to give an even shed before applying weather coat to Exterior walls including cost of Primer , labour, T&P all comp. |
| 120 | Wall painting 2 coats with weather coat over a coat of primer to inside and out side smooth surface with all cost of labour, T&P material etc complete. |
| 121 | Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 122 | Wall painting two coats with Plastic emulsion paints over a coat primer of approved shade including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C.. |
| 123 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 124 | Dressed Seasoned Salwood work Framed fixed in choukhats for doors , windows and Ventilators including all comp. |
| 125 | 32MM THICK Piasal wood or local teak wood pannelled shutters moulded panels with all labour, iron fittings,wooden cleats etc |
| 126 | 2.5cm.th.grading concrete (1:2:2) on new roof slab. |
| 127 | PAVER BLOCK |
| 128 | Supplying & filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyance, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc., complete (Measurement will be taken on finished compacted section) as per specification and diregtion of Engineer-in-charge. |
| 129 | Construction of granular sub-base by providing Close graded Granular sub- base Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works. complete as directed E.I.C. |
| 130 | Providing WBM 75mm thick compacted thickness against the loose collection of 100mm using one cum of metal with 0.25 cum of gravel as bindage per 10sqm, and cosolidation with PRR including cost, conveyance, and T&P required for the work. |
| 131 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 80mmm thick C.C. Paver Blocks of M-30 grade With approved colour design Pattern etc. complete. |
| 132 | GLASS CANOPY |
| 133 | Supplying, fitting & fixing of Toughened glass of 6mm thick approved make and approved shade, drilling holes in wind ties including fixing of ridges valleys, wind ties etc. complete including cost of glass & all fittingd |
| 134 | Hoisting joists and trusses and placing in position |
| 135 | Iron work wrought and put up in trusses record racks etc. complete |
| 136 | Drilling holes 6mm to 12mm dia in iron flats, angles, tees etc. of 6mm to 10mm thick with hand drill (labour only) per each |
| 137 | ELECTRIFICATION WORK INTERNAL ELECTRIFICATION WORK (Wiring) |
| 138 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard with 20 mm dia HMS FRLS PVC conduit ISI marke |
| 139 | Group -B |
| 140 | Group -C |
| 141 | Supply and fixing of ISI marked modular type 2nos 6Amp socket with switch on suitable size of metal box and modular cover in front on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius-Next gen)/-Schneider(Zencelo)/PANASONIC(VISION) |
| 142 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)(( anti-bactorial and flame retradant type)) with suitable size modular box & cover( anti-bactorial and flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius-Next gen)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.(Make :Legrand(Myrius-Next gen)/-Schneider(Zencelo)/PANASONIC(VISION) |
| 143 | Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( ( anti-bactorial and flame retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius-Next gen) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 144 | Supply, delivery, installation, testing and commssioning of modular type TV antenna outlet boards containing a ISI marked modular TV Antenna / Telephone socket fixed on modular concealed box including connections and making good the damages caused complete as reuired and as per dierction of Engineer-in-charge |
| 145 | Supplying and fixing of folloeing sizes of medium class PVC FRLS conduit ISI marked along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-charge Make AKG/ BEC/ Precision/ Norpak 20MM |
| 146 | Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-guard in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) |
| 147 | Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI /V-guard in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5) |
| 148 | Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI /V-guard in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5) |
| 149 | Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI /V-guard in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty conduit.(LFDB TO LBDB/Medical equipement) (4X6+2X4) |
| 150 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ABB ITUS as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.4 Way(8+(4x3)+(3x4)) Way TPN MCB DD 7 Segment DB Horizontal Type as per IEC 61439-3 with configuration of incomming I-8 modules,sub incommer-12 module & out going-12 modules,suitable for Flush mounting and Surface mounting with Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years |
| 151 | 12 Way SPN DB Horizontal Type as per IEC 61439-3 with configuration of suitable for Flush mounting and Surface mounting with Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years |
| 152 | Supplying and fixing 63 Amps rating, C series,10KA breaking capacity,4P, 415 volts, MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB200 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 1 year. |
| 153 | Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, DP, 240 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB FB200 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 1 year. |
| 154 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, c series, 10KA breaking capacity, single poles MCB of make- LEGRAND-DX3 / Siemens- Betaguard/ Schneider- Acti 9/ ABB SB 200. the existing MCB DB complete with connections as per direction of Engg.-in-charge. warranty on MCB in 1 year |
| 155 | Fittings & Fixtures Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: HALONIX/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 156 | Supplying an fixing of recess/ surface mounted 2' *2' (595MM * 595MM *70MM (+/-5%) square shaped LED made up of CRCA powder coated housing with lumen efficacy not less than 1401m/ w and lumen output not less than 3600 lumens, CRI not less than 80, CCT of 5700-6500 degree k, THD less than 10%, internal surge protection of 3 KV, complete with Non integrated isloated electronic driver (protects the output/ secondary side from any disturbance on the input/ primary side ensuring safe operation) and all other accessories suitable for operation on 140-270V, 50 Hz, L70 @ 50,000 buning hrs (5years warranty as required as per direction of Engg.-in- charge (make, HALONIX/ LT/ HAVELLS/ PHILIPS/ WIPRO/ CROMPTON/ BAJAJ) the luminaire must be replacement warranty will be 5 years |
| 157 | SITC of Sleek LED 10 watt mirror light fitting with decorative aluminium LED batten having extruded polycarbonate housing, high optically efficient diffuser, above wash basin complete with all accessoriesetc. Directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated copper conductor, single core cable and earthing etc. as required (make: HALONIX/ LT/ HAVELLS/ PHILIPS/ WIPRO/ CROMPTON/BAJAJ) |
| 158 | sitc OF PREMISES LIGHT- 120W, 130IM/ W EFFICACY, IP pc LENS NEW GENERATION ENERGY SAVING & Environmental friendly long life versatile pressure die- cast alluminium IP66, IK08 roadway luminaire with high power LED as light source with acrylic cover make: HALONIX/ LT/ HAVELLS/ PHILIPS/ WIPRO/ CROMPTON/BAJAJ) |
| 159 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 160 | SITC of Sleek LED 10 watt BULK HEAD light fitting with decorative aluminium LED having extruded polycarbonate housing,High optically efficient diffuser, complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.(Make: HALONIX/LT/Havells /Philips/Wipro /Crompton/Bajaj) |
| 161 | Supply, Installation, Testing & Commissioning of of IP65 (10-12)w up/down Fixture with Body made of Extruded Aluminium /Mild steel Pole & PDC Aluminium Housing for Optimal thermal Conductivity. With UV Stabilized Injection Moulded Diffuser for Soft and even light distribution. High Efficiency Driver with necessary safety Protection against Short Circuit, Miswiring,Over Voltage and Surge Protection of upto 10kV ( 4kV Internal and 10kV External SPD of IP67) THD<10%. CRI>70, PF>.95. CCT - 5700/4000/3000K.Impact Resistance IK05.Operating Voltage Between (100-275)V. Avg life of 50,000 Burning [email protected] the light fixture and the Driver Should be BIS Approved.Before final procurement, the final design shall be approved by the concerned client and Engineer-in-charge. Make-KLITE/Philips/LT/HALONIX/Havells/Bajaj/Crompton/Wipro |
| 162 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make-Havells/Crompton/Usha/Orient/Bajaj) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years |
| 163 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC copper winding ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix/Bajaj Turbo Pro 12DC5) 33 including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge, Replacement Warranty will be 4 years. (fan Regulator compatible). |
| 164 | Supply of 6 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel(single arm) as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F of 3 mm thick or 34 more base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer) or more (Make of poles: Utkarsh/Bajaj/RR Ispat/Vakarangee/Valmount as per direction of Engg. in Charge. |
| 165 | Supply, installation testing, commisioning of 10kva true online double conversion UPS system having 3 Ph. 415 V AC, 50 Hz Input & 415V, 50Hz 3Ph Output unity power factor. Comes with inbuilt Galvanic isolation transformer with inbuilt Phase reversal correction, SNMP card for remote monitoring and UPS should have Type 2 SPD of Fault current 40kA, 3 phase rating having protection level < IKV, response time < 0.5 nano sec, All Mode Protection (L/L-G/L-N/N-G), response time < 0.5 nano sec., EMI/RFI attenuation: 40 dB Certification-lásted with IEC/EN 61557-3; IEC/EN 61010:1; IEC/EN 61000-4-13. And It shall consist of Earth status indicator facility Continuous LED display of earth status, Green LED indicate to correct earth status, Yellow LED indicate to Poor earth status and Red LED indicate to Disconnect or No earth status. Designed according to the most exacting standards. Intelligent protection. And should be 50 Degree Operating Temperature. Including (16 nos. 12V *42AH SMF VRLA Battery Total VAH 16128) for 30 min back up with Rack and accessories. And Battery charger should be suitable to charge Lithium-ion Battery. The OEM should have their own office & Service Center at Orissa and The Bidder needs to submit the Service Tax Registration Certificate of OEM. Make: EMERSON/APC/VERTIV/SCHNEIDER/ EMSRSON/GE/GUTOR/MITSUBISHI.. Warranty period of all accessories & |
| 166 | S/I/T&Commissioning of LT indoor floor mounted CPRI Tested cubical type Main panel made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing.as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list. 80X10MM Separate Aluminium Earth bus bar should be installed.All the incomers shall have 65 kA 3P+N type 1+2 SPD with 63 A 4P MCB, C series, 10 kA.In commer- 01 no 250A 4P MCCB 36kA with with electronics s2(LSI) ,Icu=100%Ics, ,Icu=100%Ics, . Make-LEGRAND-DPX3/ Siemens-3VA/ Schneider- CVS/ ABB FormulaBusbar- 04 numbers of 250Amps AL bus bar Electrolytic AL busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator. Out going- 03 nos 160 A 4P MCCB 36kA , 09 nos 63 A 4P MCCB 36kA with TMR based release with adjustable overload ,Icu=100%Ics, . Make-LEGRAND-DPX3/ Siemens-3VA/ Schneider- CVS/ ABB Formula , . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 , 03 nos 63 A DP MCB 10 kA ,Instrument- (i) phase indicating lamp with toggle switch & HRC fuse in all the incomers.All the feeders shall have ON/OFF/TRIP indication .All the outgoing feeders shall have digital ammeter with suitable rating of Class 1 CT as per the feeder rating.(Sicure/L&T/ABB/Schneider/Siemens/Legrand)(iii) All the incoming feeders shall have digital multifunction (Bidirectional ) meter(V+A+F+KwH+KVAR+KVAH+THD+Import/Export |
| 167 | FLOOR PANEL:S/I/T&Commissioning of LT indoor floor mounted CPRI Tested cubical type Main panel made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing.as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list. 80X10MM Separate Aluminium Earth bus bar should be installed. Incomer:63 A 4P MCCB (25 KA) with adjustable thermal setting Ics = 100% of Icu Bus bar: 3 nos. 63 A CU Busbar duly sleeved OUTGOING : 3 Nos 40A/63A 4P MCB. (10 KA) Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse. (ii) 01 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication(SECURE/ Legrand /abb/Siemens/Schneider)) |
| 168 | UPS PANEL:S/I/T&Commissioning of LT indoor floor mounted CPRI Tested cubical type Main panel made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing.as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list. 80X10MM Separate Aluminium Earth bus bar should be installed. Incomer:63 A 4P MCCB (25 KA) with adjustable thermal setting Ics = 100% of Icu Bus bar: 3 nos. 63 A CU Busbar duly sleeved OUTGOING : 3 Nos 40A DP MCB. (10 KA) Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse. (ii) 01 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication(SECURE/ Legrand /abb/Siemens/Schneider)) |
| 169 | HVAC PANEL:S/I/T&Commissioning of LT indoor floor mounted CPRI Tested cubical type Main panel made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing.as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list. 80X10MM Separate Aluminium Earth bus bar should be installed.All the incomers shall have 65 kA 3P+N type 1+2 SPD with 63 A 4P MCB, C series, 10 kA. Incomer:160 A 4P MCCB (25 KA) with adjustable thermal setting Ics = 100% of Icu Bus bar: 3 nos. 63 A CU Busbar duly sleeved OUTGOING : 5 Nos 40A/63A 4P RCBO. (300 MA) Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse. (ii) 01 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication(SECURE/ Legrand /abb/Siemens/Schneider)) |
| 170 | LIFT PANEL :SITC of LT indoor floor mounted cubical type electrical main panel made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder coated paint is designed as G.A drawing. (FOR LIFT)as per direction of Engg.-in-Charge. Warranty period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list.Provision of 40kA 3P+N type 2 SPD alongwith 63A, 4P, MCB, C series, 10kA is to be given in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed. 63amp panel board having 63A Amp 16KA 4P MCCB TMR based release with adjustable overload ,Icu=100%Ics as incommer, 100 amp electrolyte Aluminium bus ba-1 Set, 63A Amp 4P RCCB 30mA- 1 No,25A Amp DP RCCB 30mA- 2 No,6-32A DP MCB 10ka, c series -2 No as Outgoing with ampere meter, voltmeter, toggler switch,three nos led indicator,Drum insulator,transparent isolation glass,danger Board and Rubber Mat as per the direction of site engineer in charge (make of mccb :-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB FORMULA) Make of MCB-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB200(Lift Panel) |
| 171 | Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade Make- Finolex/Polycab/HAVELLS/RR KABLE/KEI/Gloster of following size cables as per direction of Engg.-in-Charge. 3.5 core x 150 sq mm Aluminium armoured Cable.(FOR MAIN PANEL) |
| 172 | 3.5 core x 50 sq mm Aluminium armoured Cable.(FORHVAC PANEL) |
| 173 | 4 core x 10sq mm COOPER armoured Cable.(FOR HVAC OUTDOOR PANEL) |
| 174 | 3.5 core x 25 sq mm Aluminium armoured Cable.(FOR LIFT/FLOOR PANEL) |
| 175 | Supplying and making end termination with brass double compression gland and aluminium lugs for following mentioned size cable. 3.5 core x 150 sq mm brass double compression gland and aluminium lugs |
| 176 | 3.5 core x 50 sq mm brass double compression gland and aluminium lugs |
| 177 | 3.5 core x 25 sq mm brass double compression gland and aluminium lugs |
| 178 | Supplying,installation,testing & commissioning Of Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 2 years |
| 179 | Providing and fixing 25 mm X 5 mm GI strip on surface or in recess for connections etc. as required. |
| 180 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
| 181 | Supplying of following Materials. Supply installation of 33kV 3mm thick Class-C Rubber Mat as per IS-15652 and complete as per direction of Eng-in-charge.(Size-10mx1m) |
| 182 | Danger Board. |
| 183 | Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room. |
| 184 | Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room.. |
| 185 | Providing and fixing carbon-di-oxide type fire extinguishers consisting of welded M.S cylindrical body, squeeze lever dischange valve fitted with pressure indicating gauge internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to IS : 2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.Make- Safex/ Fireshield/Kanex/ Ceasefire/Flameklog .4.5 kg capacity |
| 186 | Providing and fixing ABC type fire extinguishers consisting of welded M.S cylindrical body, squeeze lever dischange valve fitted with pressure indicating gauge internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to IS finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.Make- Safex/ Fireshield/Kanex/ Ceasefire.6 kg capacity |
| 187 | Supply delivery ,installation andcommissioning of LED sign board superior make with flex print signage board of ACRYLIC ALUMINIUM CHANNEL LETTERS OF ( PER LETTERS-16’’ - 13 PC ACRYLLIC letter in English,&odia of total size of (approx.) with white acryllic and ACP sheets.MAKE LED 1.5 w of make HISIGN/interone/Brandlit,120 lumen,VOLT 12 V DC ,CRI>80,IP GRADE 66 Waterproof SMPS HISIGN IP 67/68 (BIS APPROVED) INPUT 220 V OUTPUT 12 V DC Wiring 1.5 sq mm FR grade (ISI MARKED ). LED for each letter having 3 row equally spaced. The letter structure to be installed on the top of the Office building shall withstand 200 km/hr wind velocity, MS ANGLE as per need for sustainable fixture 2 inch Ms pipe fastened with concerte . All materials shall be as per the technical specifications got approved before start of fabrication and installation.with all connection conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge.MAKE: COSIGN/EQ |
| 188 | VRV HVAC SYSTEM (HALL AREA) (28HP) |
| 189 | SITC of Air Cooled Top Discharge & Modular Type VRF Outdoor units having cooling only operation with highly efficient Inverter Scroll Compressor with R-410A refrigerant green gas. All the units shall be provided with micro processor based control for sequential starting of condensing units, advance refrigerant control with Silicon coated refrigerant cool PCB for very high ambient temperature , Liquid back flow protection , precise oil control technology, 3ph DC motor condenser fan motor, various electrical protection like-phase sequence, high /low voltage protection ,compressor overload protection, fan & compressor temparature protection & pressure protection. The Outdoor unit also having blue fins condenser with anti-corrosion coating, Refrigerant Cooled PCB, external static pressure not less than 60 Pascal & capable to run stably even in 52 Deg C. The outdoor units should have Cooling EER not less than 4.0 on 100% load at AHRI condition(required datasheet to be submitted by OEM) for better energy efficiency.Following ODU should have minimum 2 or more module above 10HP ODU (for redundency) & actual rated Cooling KW capacity (after Deration) of ODU at 43 Deg C (In-line with Heat load design Data considered & required datasheet to be submitted by OEM) : The selected ODU shall have no deration at design condition ie 43 Deg. C DB ie OEM needs to supply VRV/ VRF ODU which can deliver its actual Cooling KW capacity at 43 Deg C DB (OEM Compressor rating chart / Data book information to be submitted to ensure the Cooling EER & capacity deration at design condition). Approved make : Toshiba /Fujitsu -General /Mitsubishi Electric/HITACHI/TOSHIBA 14 HP (40 KW Cooling Capacity) |
| 190 | Outdoor Connecting Kit |
| 191 | Supply, Installation,Testing and Commissioning of following minimu capacity 4-way/ VRV Cassette Type Indoor ceiling mounted unit equipped with cord less remotes & refnets , synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, drain pan, drain pump, cassette grill, insulation, necessary supports, vibration isolation etc, suitable for operation on 230 V ± 10%, 50 Hz single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire. All indoor Units should have force shut option to connect with fire alarm adaptor, so that the unit automatically stops in case or fire. The cooling capacity of indoor unit will be at air inlet conditions of 27 degree C DBT and 19 degree C WBT. The cost is inclusive of Refnet joints. Make: Mitshubishi/ TRANE/O-GENERAL/Diakin/HITACHI/TOSHIBA CASSATTE TYPE INDOOR UNIT 3.6 TR - Cassette type IDU with all accessories complete as required |
| 192 | SITC OF ACCESSORIES Indoor Refnet Joints (OEM make only) |
| 193 | Outdoor Refnet Joints (OEM make only) |
| 194 | Supply & Installation of interconnecting following sizes of refrigerant copper pipe work of following outer diameter, insulated with 25mm thick closed cell electrometric Nitrile rubber tubular insulation between each set of indoor & outdoor units . The pipe dia upto 25 shall be soft seamless & above 25mm dia shall be hard seamless . All piping inside the room shall be properly fixed/supported with suitable size of clamp/ M.S. hanger and all external piping shall run in GI. cable tray etc. as reqd. Make of insulation-K Flex/Armacell/Vidoflex/Eurobatex/Isoline Make of pipe-Rajco/Mandev/Maxflow 41.3mm |
| 195 | 34.9mm |
| 196 | 28.58mm |
| 197 | 22.2mm |
| 198 | 19.05mm |
| 199 | 15.9mm |
| 200 | 12.7mm |
| 201 | 9.52mm |
| 202 | Providing & fixing control cum transmission wiring of 2 core x 1.0 sqmm shielded copper cable in suitable conduits between indoor and out door unit. Make-Polycab/KEI/Finolex/RR Kabel/Gloster/Havells/V-Guard |
| 203 | Providing & fixing of PVC Pipe complete with fittings, supports as per specifications and duly insulated with 9 mm thickness Class O of closed cell nitrile rubber/XLPE as per direction of Engineer-in-charge & specifications enclosed as reqd. 32mm inner dia |
| 204 | 40mm inner dia |
| 205 | Supplying,fixing of hot dip galvanized GI perforated cable trays with cover having horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 450mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge. |
| 206 | Supply and Commissioning of VRF systems including additional referigernt R410A in all respect to complete the system as per site requirements |
| 207 | M.S Stand for Outdoor Unit |
| 208 | Provision for erection of scaffolding for the copper pipe routing & Lifting for air-conditioning work carefully including cost, conveyance, loading and unloading of all materials and cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 209 | SPLIT AC SYSTEM (GUEST ROOM) |
| 210 | Supplying and installation of AC Point having 16-20A DP MCB, C series with enclosure, Schneider/Siemens/Legrand/ABB of suitable size as required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 1 year against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 211 | SITC of 1.5 TR high wall 5 star inverter type split A.C machine (BTU/Hr-18000) with copper condensor & evaporator having ambient temperature 52 degree celcius with comprehensive 1 year warranty,5 years warranty on PCB, 5 years warranty on compressor.The rate is inclusive of 3 mtr copper refrigerant pipe. In case, the distance between ODU and IDU exceeds 3 mtr, then only the item of copper pipe shall be executed without any joint and equivalent mtr shall be deducted from the copper pipe item. (Make:O-General/Diakin/Mitsubishi/Hitachi) |
| 212 | Supply and fixing of 4kVA Voltage stabilizer (130-230V) (Make-V-Guard/Microtek) |
| 213 | Supply,installation of hard/soft ISI marked copper refrigerant piping of size 5/8 inch and 1/4 inch for suction and liquid line with 3 corex4 sqmm FRLS Copper control cable alongwith 25 mm weather proof closed cell nitrile insulation ,complete with fitting of bends and other nesessary material to complete the job. |
| 214 | Supply,installation & fabrication of MS base frame for outdoor unit and other nesessary material to complete the job. |
| 215 | CCTV CAMERA & DATA NETWORK |
| 216 | SITC of 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance ≤ 9.38 Ω/100m Max., Cable support Delay Skew: < 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Systimax, Legrand, Panduit. |
| 217 | SITC of Cat6 I/O with single Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold > 0.8 μm. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94-V-O certified. Make: Systimax, Legrand, Panduit |
| 218 | SITC of Cat 6, 24-port loaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking. Make: Systimax, Legrand, Panduit |
| 219 | SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax, Legrand, Panduit(1 mtr length) |
| 220 | SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax, Legrand, Panduit(2 mtr length) |
| 221 | SITC of 6 core Single mode OS2 Unitube Armoured Optical fiber cable through existing conduit: The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm. Outdoor Corrugated Steel tape Central loose tube. ( Standard Approved: ISO 11801 2nd edition/ EN 50173-1:2002 / IEC 60794-1/IEC 60793-2-50 class B1.3 / EN 60793-2-50: class B1.3 / ITU Recommendation G.652.D - the oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE 802.3 - 2002 incl. 802.3ae ) Jacket. Make: Systimax, Legrand, Panduit |
| 222 | SITC of Rack mount Draw Type Loaded 6 port LIU available in Standard 19” ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 12 Duplex SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,Adaptor, SM, Duplex SC, PC Type ,Pigtail, Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR-326-Core . Make: Systimax, Legrand, Panduit |
| 223 | SITC of OFC Patch Cor, SM (OS2), Duplex LC-SC, LC-LC PC Type, 3M, LSZH Fiber Optic Single Mode OS2 Patch Cords are offered in LSZH Jackets with Corning Fiber,Insertion Loss : <= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC>= 45db, UPC>=50db, APC>=60db. Make: Systimax, Legrand, Panduit |
| 224 | SITC of 1G-LX/LH SFP transceiver module,SMF, 1310nm, 9/125 um Single mode Fiber Type up to 20 KM. Make: Cisco, Digisol, Netgear |
| 225 | SITC of 24 Port Layer 2 PoE+ Switch having 24 x 10/100/1000 Mbps Ethernet PoE+ ports with 4 x 1/10Gig SFP+ ports ,1 x RJ45 port console port ,Switching Capacity 128 Gbps , Throughput 96 Mpps ,MAC Address 16k , Switch should support IEEE 802.3af (15.4W) & IEEE 802.3at (30W). Total PoE power: 370W or above , Switch should support DHCP server/relay/client, DHCP snooping/option82 , Switch should support Console, Telnet, SSH v1/2, HTTP, HTTPS, SNMP v1/v2/v3, RMON , TFTP, FTP, SFTP, NTP, ZTP, SPAN, RSPAN,Switch should support support ICMPv6, DHCPv6, ACLv6 ,IPV6 Telnet ,Temperature 0°C -50°C ,Power Supply AC: 100-240V. Make: Digisol, Cisco, HP |
| 226 | SITC of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make:Valrack, Rittal, Legrand |
| 227 | SITC of 24U 600/650D UL Listed Floor mount Rack with Front perforated door with 3 point lock, Rear mesh door with Cam lock and 3inch Castor Wheel included with 2 no 6/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Length, 4nos 1U Metal Cable manager with Plastic cable loops, 2nos CFM FAN set, 1no Monitor Tray - Ventilation - 495W - 375D and H/W screw920sets). Make:Valrack, Rittal, Legrand |
| 228 | Supply and installation of Dual band 802.11ax WiFi6 Dual Band Access Point. Complying PoE+ for power, with inbuilt on premise virtual controller as well cloud based controlling and administration of WiFi systems All hardware should supplied with necessary mounting brackets and IN power cord with 3 years of comprehensive onsite warranty. Make: Cisco/Digisol/Netgear |
| 229 | CCTV SURVILLENCE SYSTEM Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low-Light IR Fixed Lens Dome/Bullet Camera, 1/2.8\\" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, four stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 3 IR LEDs, Smart IR with upto 50m(bullet)/40m(dome) IR distance, Auto ICR (Infrared Cut Filter) 130dB True WDR, S/N Ratio 55db, Shutter Speed 1/3 - 1/100,000; Adavance Video Compression technology such as H.265 HEVC/ H.264 / MJPEG , Fixed Lens 2.8mm(Dome)/3.6mm(bullet), Field of View FoV H:96.5°, V:73.8°(dome)/ Field of View FoV H:94.1°, V:71°(bullet), BLC, HLC, WDR, 2D/3DNR, White Balance - Auto/Manual/Day/Night/timing, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 5 Privacy Mask, 6 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 2TB SD card support, PoE (802.3 af) and 12V DC, IP 66/67 & IK10 Vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130-4), FCC Part 15, EN 55032 & RoHS (EN63000),NDA,STQC compliant. Make-Honeywell Value series/Pelco/Axis/Bosch |
| 230 | Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low-Light IR motorized Lens Dome/Bullet Camera, 1/2.8\\" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, four stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 3 IR LEDs, Smart IR with upto 70m(bullet)/50m(dome) IR distance, Auto ICR (Infrared Cut Filter) 130dB True WDR, S/N Ratio 55db, Shutter Speed 1/3 - 1/100,000; Adavance Video Compression technology such as H.265 HEVC/ H.264 / MJPEG , Fixed Lens 2.7-13.5mm motorized, Field of View FoV H:100-28.5°, V:73-21.4°, BLC, HLC, WDR, 2D/3DNR, White Balance - Auto/Manual/Day/Night/timing, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 5 Privacy Mask, 6 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 2TB SD card support, PoE (802.3 af) and 12V DC, IP 66/67 & IK10 Vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130-4), FCC Part 15, EN 55032 & RoHS (EN63000),NDA,STQC compliant. Make-Honeywell value series/Pelco/Axis/Bosch |
| 231 | Supply , Installation, testing , commissioning of 64 Channel NVR with 8 SATA; 384 Mbps incoming bandwidth, Up to 8 Megapixels Resolution Display and Recording, H.265 video compression technology with real time encoding, Full function CMS (Central monitoring software) supported, Two way audio supported, Dual streaming technology to encode recording stream and network stream separately, Supports remote monitoring on Mobile Client (Android, IOS), TCP / IP, PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP, Time/ Date, Alarm, Motion Detection & Exact Search (accurate to second), Record Snapshot, FTP, Preset Calling, Email notification supported, Manual/ Alarm/ Motion Detection/ Continuous, CE, FCC, RoHS).Make-Honeywell value series /Pelco/Axis/Bosch |
| 232 | Supply, Installation,Testing & Commisioning of Surveliance 10 TB HDDMake:- WD/Segate/Toshiba |
| 233 | SITC of 55\\" UHD IPS Commercial Digital Display for Small Size Discussion & Chambers: Brightness (440 nits or higher), Dynamic Contrast Ratio (Dynamic MCI (Hz)):1000000:1), 1000000:1, Static (Panel) Contrast Ratio-1200:1, Response Time (G to G)-8 ms, Refresh Rate.-60 Hz, Life span (hrs)-30,000, Speaker (Sound Output):10W + 10W, Speaker System: 2.0 ch, DVB-T2/C Broadcasting System, Commercial Smart UX, webOS version (webOS 6.0), BIS Certification with 3 years onsite warrenty. Make: LG/Samsung/Sony |
| 234 | 8 PASSENGER LIFT |
| 235 | Supply,Installation, Testing & Commissioning of of 8 Passenger lift gearless with Machine room Capacity 1020 kg , G+3 Floors (Shaft size should not be less than-1800mm(Left to right)x1800mm(Front to back)) with ACVVVF drive/Control for constant load of 544 kg ARD >=1.25 MPS SS honeycomb interior ,2hr fire rated door with simplex operation without attendant car position indicators,battery operated alarm bell & emegency light,SS honeycomb finish door finished car interior, recess Granite flooring ,power operated centre opening automatic sliding SS honeycomb finish doors for car entrance & hoist way entrance etc .All SS materials shall be of grade SS-304 with thickness not less than 1.6mm. Machine beams,buffer support channels,facia plate including sills pit ladder metal screen in Elevator pit etc.as per specifiaction including cost of (i)Overload detection,(ii)Voice announcement,(iii) Intercom,(iv)Braille Buttons (v) provision of flat cat-6 cable for cctv with all Civil & Electrical works required for installation of Elevator in the existing lift well and machine room less,scaffolding ,floor cutting including Fireman's switch complete in all respect.. make:OTIS/Mitsubishi/TKE/Schindler |
| 236 | FIRE FIGHTING |
| 237 | PUMPS AND APPURTENANCES Supplying, installation, testing and commissioning of Electric Motor Driven Pressurization Terrace Pump having discharge of 450 LPM at 35 Mtr head complete with Pump Set, Electric Motor suitable for operation on 415 V ,3 ph, 50 c/s AC supply , Base Frame.Make-Wilo/KSB/Kirloskar |
| 238 | Supply, installation, testing and commissioning of Floor/Wall mounted sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base frame, complete with all accessories including interconnections, earth bus etc as required comprising of One (1)- 63 Amp, 10 KA,TPN (Class-C) MCB with 3 Nos Phase indicating lamps with control fuse/ MCB, Digital Voltmeter with selector switch. DOL starter with O/L and Single Phasing Preventor suitable for 7.5 HP motor. ON/OFF indication lamps, Auto manual switch and ON/OFF push button.as per direction of engineer in charge Control panel for fire pumps for auto action.make-Legrand/schneider/Siemens/eq. Model of ABB/L&T/Hager/C&S/Havells |
| 239 | 1100 V GRADE POWER/CONTROL CABLES :SITC of FRLS,PVC outer sheateh, steel armoured, aluminium, 1100v grade power cables with glands etc. The minimum size of the cables shall as mentioned below as per direction of engineer in charge.Make-Polycab/Havels/KEI. |
| 240 | 2 C x 1.5 mmsq |
| 241 | PIPE & VALVES ETC. Supply,Installation,Testing & Commissioning of 'C' Class heavy duty MS pipe (as per IS 1239 upto 100 mm NB and IS 3589 for above 100 mm 6.33mm thick) with flanges and fitting such as bends, tees, reducers, rubber insertions and galvanized nuts and bolts of following size on surface along wall / shaft with MS bracket, suspended from ceiling/ beam with suspenders duly painted with two coats of primer and finished with enamel paint of approved colour laid through pipe or in trench after wrapping with hassen cloth after applying coal tar primer as required as per direction of Engineer-in- charge.Make-TATA/SAIL/JINDAL 100mm NB |
| 242 | 80mm NB |
| 243 | Providing, fixing, testing and commissioning of following size manually operated hand lever type cast iron double flanged slim seal wafer type Butterfly valves with EPDM iron disc as per IS-13095 having pressure ratting PN -1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of E.I.C. Make-Zoloto/Kartar/Kirloskar 100mm NB |
| 244 | Providing, fitting & fixing of following size cast iron double flanged type dual plate Non return Valve as per IS- 5312 (Part 1): 2004 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like flanges, rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of Engineer-in-charge. Make-Zoloto/Kartar/Kirloskar 100mm NB |
| 245 | Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves of suitable size with all accessories as per direction of Engineer-in-charge.Make-H.Guru/G.Guru |
| 246 | Supply,Installation,Testing & Commissioning of Pressure Switch with cut-off bronze ball valves with integral strainer & flare nut (mixed ends) of suitable size with all accessories as per direction of Engineer-in-charge.Make-Danfoss/Indfoss/Grundfoss |
| 247 | Supply,Installation,Testing & Commissioning of stainless steel strainer fabricated out of 1.6 mm thick stainless steel sheet Y Stainer with 3 mm dia hloes with stainless steel flange as required. Make-Zoloto/Kartar/Kirloskar 100mm NB |
| 248 | DOWN COMER SYSTEM Supply,Installation,Testing & Commissioning of Stainless steel Hydrant Valve / Landing valve, of 63 mm NB size, type-A, single headed , oblique type, as per IS :5290/93 and as per direction of Engineer-in-charge.Make-Newage/Minimax/Fireshield/Kartar |
| 249 | Supply,Installation,Testing & Commissioning of SS short branch pipe with 63 mm male inlet and 19 mm outlet nozzle, as per IS:903 and as per direction of Engineer-in-charge. Make-Newage/Minimax/Fireshield/Kartar |
| 250 | Supply,Installation,Testing & Commissioning of 63 mm NB and 15meter long RRL Fire Hose fitted with 63mm intstantaneous stainless steel male & female SS coupling, complete by GI wire binding for Internal Hydrant as per direction of Engineer-in-charge. Make-Newage/Minimax/Fireshield/Kartar |
| 251 | Providing supply & fixing of MS Hose Box for of suitable size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr long fire hose and a branch pipe, wall mounted type as per direction of Engineer-in-charge. Make-Newage/Minimax/Fireshield/Kartar |
| 252 | Supply,Installation,Testing & Commissioning of Swinging pattern wall fixing first aid hose reel made from MS sheet and waterways and moving parts with rubber hose of 20 mm dia. and 30 mtrs. long with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585 Type-I., complete with all accessories as per direction of Engineer-in-charge. Make-Newage/Minimax/Fireshield/Kartar |
| 253 | Providing, fitting and fixing of C.I. 25 MM single air relief valve with stop cock confirming to IS:14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of Engineer-in-charge. |
| 254 | Providing, fitting & fixing of 2-Way GM fire brigade connection consisting of 63 mm dia instantaneous type male couplings with built-in check valves, 150mm dia flanged outlet complete with bolts, nuts and rubber insertions confirming to IS:904 with ISI mark including testing & commissioning the system etc. all complete as per apporoved specification & direction of EIC. Make-Zoloto/Kirloskar/Kartar |
| 255 | SIGNAGES SIGNAGES:-Providing and installing in position the following type of sign boards made out of 3mm thick flexyle photoluminescent based glow in dark sheeting with luminous properties enclosed in a weather proof Uvstabilized film with UV screen printing by imported links pasted over3 mm thick cast acrylic from front side with 6 mm thick acrylic, -20 to+80 deg C, Suitablefor indoor use, greenish yellow, glow visible upto 4-6 hr in total darkness.Make-Prolite/Bajaj or Equivalent |
| 256 | FIRE ALARM SYSTEM Supply, installation, testing and commissioning of 1 loop Microprocessor based intelligent and modular Fire Alarm Panel, 100% electronically addressable system where field device addressing is done by panel and not user, 5.9 inch LED touch screen Display, system with peer to peer networking of 126 network nodes, loop capacity of 255 devices per loop, built in charger that can support backup upto 24hours idle condition and 30 minutes during alarm condition, capacity to have upto 250 logic zones created, 4 NAC circuits, Event history on 9999 logs, capacity to communicate loop mount repeater panels, optional NAC power supply units that are loop mountable and 100% supervised from main panel. Certification: EN APPROVED. including all accesories and connection as per direction of Engineer in Charge Makes: Eaton/Schrack/ Menvier/ Notifier |
| 257 | Supply, Installation, testing and commissioning of Addressable 2 wire break glass manual call point with built in short circuit isolator, 100% soft addressed from panel, Wall mounting, resettable key option with back box. Certification: EN Approved . Makes: Eaton/Schrack/ Menvier/ Notifier |
| 258 | Supply, Installation, testing and commissioning of Addressable loop powered Wall mount sounder with strobe, 100% soft addressed from panel, with 3 tones, Low volume: 87dB at < 8.6mA & High volume: 100dB at < 11mA, shall be with inbuilt isolator. Certification: EN Approved . Makes: Eaton/Schrack/ Menvier/ Notifier |
| 259 | Supply, Installation, testing and commissioning of Addressable loop powered Wall mount sounder with strobe, 100% soft addressed from panel, with 3 tones, Low volume: 87dB at < 8.6mA & High volume: 100dB at < 11mA, shall be with inbuilt isolator. Certification: EN Approved . Makes: Eaton/Schrack/ Menvier/ Notifier |
| 260 | Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required Makes: Make: POLYCAB / FINOLEX/ HAVELLS/KEI . |
| 261 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated, sheet cover in front including painting etc. as required. 100 mm X 100 mm X 60 mm deep. |
| 262 | PUBLIC ADDRESSABLE SYSTEM Supply, installation, testing and commissioning of IP based Digital voice evacuation system for 8 Zones expandable up to 120 zones compliant with the standards of BS EN54-32 & EN60849. The System should be capable to EVAC, paging, PA and BGM and Pre-recorded Massage storage. Seperate indicators for status, Priority level, two input for mic, 4 Line input and one rec output. With following features: inbuilt 500W Class- D Digital Amplifier, Class- AB Speaker Line Output with Monitoring features, Built in Fireman Microphne,LED Display for the Fault Indication,8 Input and 8 Output trigger contact,1 Nos of Standby Amplifier Input,BGM Input and Volume ControlMake: MERSHON / LDA /HARMAN / BOSCH |
| 263 | Supply, installation, testing and commissioning of 6W Wall Mount Speaker with following features:Speaker driver 6\\" full range, Frequency Response 110Hz - 15kHz, With Line Matching transformer 100V. Variable tapping, SPL@1M/1W - 98dB, Material ABS enclosureMake: MERSHON / LDA /HARMAN/ BOSCH |
| 264 | Supply,installation,testing and commissioning of 2core x 1.5sq.mm Speaker cable with its required accessories like saddle,screw,grip etc fixed on the surface of the building structureMake: POLYCAB / FINOLEX/ HAVELLS/ KEI . |
| 265 | Supplying and fixing of 25MM sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 266 | P.H. FITTINGS |
| 267 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge. Ground floor 25mm dia PVC ASTM pipe (sch-80) |
| 268 | 32mm dia PVC ASTM pipe (sch-80) |
| 269 | 50mm dia PVC ASTM pipe (sch-80) |
| 270 | first floor 25mm dia PVC ASTM pipe (sch-80) |
| 271 | 32mm dia PVC ASTM pipe (sch-80) |
| 272 | 50mm dia PVC ASTM pipe (sch-80) |
| 273 | second floor 25mm dia PVC ASTM pipe (sch-80) |
| 274 | 32mm dia PVC ASTM pipe (sch-80) |
| 275 | 50mm dia PVC ASTM pipe (sch-80). |
| 276 | Third floor 25mm dia PVC ASTM pipe (sch-80) |
| 277 | 32mm dia PVC ASTM pipe (sch-80) |
| 278 | 50mm dia PVC ASTM pipe (sch-80). |
| 279 | terrace floor 32mm dia PVC ASTM pipe (sch-80) |
| 280 | 50mm dia PVC ASTM pipe (sch-80) |
| 281 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints all complete as per specification and direction of the Engineer in charge. Ground FLOOR 20mm dia CPVC pipe |
| 282 | 25mm dia CPVC pipe |
| 283 | 32mm dia CPVC pipe |
| 284 | FIRST FLOOR 20mm dia CPVC pipe |
| 285 | 25mm dia CPVC pipe |
| 286 | 32mm dia CPVC pipe |
| 287 | SECOND FLOOR 20mm dia CPVC pipe |
| 288 | 25mm dia CPVC pipe |
| 289 | 32mm dia CPVC pipe |
| 290 | THIRD FLOOR 20mm dia CPVC pipe |
| 291 | 25mm dia CPVC pipe |
| 292 | 32mm dia CPVC pipe |
| 293 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. 15 mm dia 2 WAY BIB COCK WITH WALL FLANGE (ALI-CHR-85041 Jaquar Make) |
| 294 | 15mm dia CP Health Faucet (ALD-CHR-577) |
| 295 | 15 mm dia CP Bib cock( VGP-CHR-81037 Jaquar make ) |
| 296 | 15mm dia CP ANGULAR STOP COCK WITH WALL FLANGE (FLR-MCH-5053N Jaquar Make ) |
| 297 | 20mm dia CP CONCEALED STOP COCK EXT HVY WTH WITH FLANGE( FLR-MCH-5083KPM Jaquar ) Make |
| 298 | 32mm dia CP Bottle trap (Jaquar make)-ALD -CHR-769L -300x190cm |
| 299 | Auto closing concealed urinal flush valve(Jaquar make)-PRS-CHR-077 |
| 300 | URINAL PARTITION ST.450mm(JSE-CHR-810US450X) |
| 301 | 15 mm dia CP pillar cock auto closing system(Jaquar)-PRS-CHR-031 |
| 302 | Soap Dispenser with glass bottle(ACN-CHR-1135N) |
| 303 | CP soap Dish holder (Jaquar make)-AKP -ABR-35731P |
| 304 | Towel Ring Round - (As Per Jaquar,Cat no.:ACN-CHR-1121BN) |
| 305 | 600mm long CP towel rail(Jaquar)-ACN-IVY-1111NM |
| 306 | 25mm dia brass or gun metal fullway valve (Shakti Make) |
| 307 | 32mm dia brass or gun metal fullway valve (Shakti Make) |
| 308 | 50mm dia brass or gun metal fullway valve (Shakti Make) |
| 309 | 15mm dia CP flange |
| 310 | 15mm dia CP extension piece |
| 311 | C.P. Waste 11/4\\" |
| 312 | Supplying all materials, labour, T&P and fitting and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of the Engineer in charge.15mm dia CP revolving shower With shower arm(Jaquar)OHS-CHR-1985+SHA-CHR-477 |
| 313 | Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge 10 litres capacity pvc low level cistern with 32mm dia CP long flush bend Slimline white (Hindware / Parryware Make) |
| 314 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge 110mm U-PVC door tee |
| 315 | 110mm U-PVC Plain tee |
| 316 | 110mm U-PVC door bend |
| 317 | 110mm U-PVC plain bend |
| 318 | 110mm dia U-PVC 'P' trap |
| 319 | 110mm dia U-PVC Plain Shoe Bend |
| 320 | 110mm dia U-PVC offset with out ear |
| 321 | 110mm dia U-PVC cowl |
| 322 | 125mm dia CP grating |
| 323 | Grab bar 300MM (Jaquar make)AHS-CHR-1501 |
| 324 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. European water closet with ‘S’ trap plain (Hindware)No.20079 |
| 325 | Supplying all materials, labour, T&P and fixing bowl pattern urinal conforming to IS:771-part-3-1985 of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Half stall urinal (Parryware / Hindware make) |
| 326 | 15mm dia urinal spreader |
| 327 | 32mm dia C.P. dome waste |
| 328 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. Under counter basin JAQUAR MAKE SLS-WHT-6601 |
| 329 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge. Design mirror |
| 330 | Supplying all materials,labour,T&P and fixing 5000 ltr Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge |
| 331 | Providing, Supplying and Fixing Stainless Steel A ISI 304 (18/8) wash Kitchen sink conforming to IS 13983 with C.I. Brackets, stainless steel waste coupling, 32mm dia PVC waste pipe and stainless steel plug 40 mm including painting of fittings and brackets of CERA (CAT. NO. B4511105) with all fittings & fixtures complete including making good the damages . including cost of all materials, labour GLOSS finish , T&P, lead, royality etc.complete in all respects as per direction of Architect /Engineer in charge. |
| 332 | Construction of 50 users RCC septic tank-1 No Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.(1x3.70x2.40x2.50) |
| 333 | Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge. |
| 334 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (1x3.70x2.40x0.20) |
| 335 | Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge .In ground floor (inside/outside)2x(3.20+1.90)2.50 Floor 1x3.20x1.90 |
| 336 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside/outside) 2x(3.20+1.90)2.50 Floor 1x3.20x1.90 Bufflewall 2x1.60x1.65 |
| 337 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. R.C.C floor and roof slabs up to 4.30m height I/S - 1x3.20x1.90 Base - 1x2x(3.20+1.90)x0.125 |
| 338 | R.C.C beams,columns,girder and bressmer etc. I/s - 1x2x(3.20+1.90)x2.40 O/S- 1x2x(3.20+1.90)x2.55 |
| 339 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In Ground Floor per 0.80 qtl/cum |
| 340 | Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor Base- 1x3.20x1.90x0.125 Slab - 1x3.20x1.90x0.13 Wall - 1x10.20x0.25x2.50 |
| 341 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor Floor 1x3.20x1.90x0.10 |
| 342 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor B.Wall - 1x2x5.1x2.0 |
| 343 | Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In F&P B.Wall - 1x5.1x0.25x2.0 |
| 344 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 345 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge. 2x(3.20+1.90)x0.30x2.00 |
| 346 | Supplying all materials, labour,T&P and providing 25mm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips on new work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. sllab -1x3.20x1.90 |
| 347 | Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge. 2x(3.20+1.90)x2.50= |
| 348 | Dewatering with 5 H.P diesel engine pump during excavation |
| 349 | Supplying all materials, labour, T&P and fitting and fixing S.W.Tee of size 150mx150mx150m as per P.H.D.specification and direction of the E.I.C. |
| 350 | Supplying all materials, labour, T&P and constructing vent base as per P.H.D specification etc all complete. |
| 351 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm diameter U-PVC SWR pipes(Supreme/Ashirvad) |
| 352 | 110mm U-PVC cowl |
| 353 | EXTERNAL P.H. WORK |
| 354 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm all round concrete |
| 355 | 160mm all round concrete |
| 356 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge. Inside size 250mmx250mm |
| 357 | Constructing Inspection Chambers with R.C.C top slab in (1:2:4) mix, foundation concrete (1:4:8), inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification. |
| 358 | Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in chargeR.C.P.C. Cover(20\\"/22\\" round Man hole cover) |
| 359 | Constructing Inspection Chambers with R.C.C top slab in (1:2:4) mix, foundation concrete (1:4:8), inside plaster 12mm thick with cement mortar (1:3) finished with neat cement punning, 12mm thick outside cement plaster (1:3), brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:5), cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification. |
| 360 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, sand packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. |
| 361 | Supplying all materials, labour, T&P and providing fitting and fixing Aquaguard PRO Thermapure 120 PSS RO ACH which gives you Hot,Cold & Ambient purified water.Aquaguard PEO Thermapure 120 PSS RO has built-in-3 stage combinations,Tank Capacity 120Ltr.,Cold Water-80 Ltrs,Hot water-20 Ltrs.,Ambient water-2- Ltrs.,Cooling capacity-60 LPH,Refrigerant-HFC R134a,Cold water temperature-15 Deg.C+/-1*,Heating coil wattage-2000W,Hot water temperature-50 Deg C+/-1,Thermal insulation-PUF,No of Faucets-1 Hot,1 Cold,1 Ambient,Tank,front panel and drain tray MOC-SS304,Other body panels-Powder coated CRCA Steel,No of filtration stages-7,RO Capacity-50 LPH*,RORecovery%-50%*,TDS Reject-90%*,Dimentions(WxDxH)cm-75x72x144,Net weight-92 Kg.etc.all complete as per direction of the Engineer-in-charge. |
| 362 | Supplying all materials, labour, T&PProviding,fitting & fixing of toilet Cubicle made out of the material and specification as detailed below:(Cubicle)(1000mm(W)81550mm(D)x2003mm(H)Providing Intermediate panel,Plaster & door: The intermediate panel is one continued panel without any joints. All intermediate panel is one continued panel without any joints. All intermediate panels,pilasters and doors shall be 12mm thick with edges chamfered. The solid compact laminate(Phenolic Core board)is based on thermosetting resins,homogeneously reinforced with celluloselfibres. Top surface on both sides is melamine coated which is scratch and impact resistant.Providing Hardware and fixing: All pilasters are to be supported by adjustable foot and non corrosive inserts. Top rail and wall fixing with and exteror polyamid coating quarantees resistance to breakage,heat,humidity and chemicals. The base of the adjustable foot will be anchored to the floor with a clearance height of 100mm. Aluminum U-Channel will be used for the fixing of intermediate panels to the wall.1 unit.Compact laminated cubicle L Partition with door |
| 363 | Supplying all materials, labour, T&P and fitting & fixing of toilet front partition size 0.12x0.5 with door made 12mm thick solid compact laminated (Phenolic core board) reinforced with celluse fibres, the partision fixed in wall hanging with clamps complete etc as per specification and direction of the Engineer in charge. Urinal Partition wall-size - 0.90x0.50 |
| 364 | Matrix Set -1 (WB 65 x 35 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no hinged rail 76 cm and five nos of grab rails 60 cm) (head)70002 |
| 365 | Sinking of (200 x150)mm dia bore well - 1 No by DTH method.Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below first level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only Drilling of 200mm dia bore 00 mtr to 45mtr |
| 366 | Drilling of 150mm dia bore 45 mtr to 150mtr |
| 367 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from first level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. Lowering of 200mm dia P.V.C casing pipes 00 mtr to 45 mtrs |
| 368 | Cost of 200mm dia PVC (sch-80) pipe |
| 369 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge. By DTH Rig |
| 370 | Supplying all materials, labour, T&P for withdrawing casing pipes from the unsuccessful bore well including all necessary equipment and labour as per direction of the Engineer in charge . |
| 371 | Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. |
| 372 | Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge. 1.50 H.P single phase 3 stage head range 20 to 35 metres, discharge 145 to 110 L.P.M with outlet dia of 25mm |
| 373 | DOL controll pannel |
| 374 | 2.5 Sqmm flat cable |
| 375 | 32mm dia Steel short piece |
| 376 | Steel roop with cover |
| 377 | Well cap |
| 378 | 50mm size CI bracket |
| 379 | 20mm dia rigid UPVC pipe |
| 380 | 32mm Dia brass non return valve(Shakti make) |
| 381 | 32mm dia HDPE pipe |
| 382 | Labour charges for lowering of submesible pumpset with pipes and cables etc. with testing and commissioning at site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 31, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 days
Oct 23, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 31, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender