Tender For (2001-306-38283) providing Lwss To Vill. Palana Kaprol & Kiyarli Bagan. (Sh:- repair renovation Damages (2026-27) Providing & Fixing Of 6 Sqm 3 Core Copper Cable And 20 Hp Starter And providing and Fixing Of Cast Steel Sluice Valve & Nrv,
Tender Value
40.04 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
7 days left
EMD
80100
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for (2001-306-38283) providing Lwss To Vill. Palana Kaprol & Kiyarli Bagan. (Sh:- repair renovation Damages (2026-27) Providing & Fixing Of 6 Sqm 3 Core Copper Cable And 20 Hp Starter And providing and Fixing Of Cast Steel Sluice Valve & Nrv, Dismantling/ Relaying Of Gi Pipe 25 Mm Dia And providing and Fixing Gi Fitting Os Various Dia, providing Laying & Jointing Of Gi Pipe Line Various Dia At Various Rds, providing & Installation Of Falcon Make Mono Block Submersible Pump Of 7.5 Hp With Copper Cable, providing & Fixing Of 70 Sq Mm 2 Core Copper Cable And Repair Of 40 Hp Motor For Pump At Stage 1St And providing & Fixing Of Pipe Wrench Heavy Duty Inder Make Isi P-333 & Ratchet Threder Heavy Duty For Sainj Section, Balag Section And Chailla Section, Rewinding Of 3 Phase Induction Make Motor 30 Hp Make Crompton 2920 Rpm De/Nde 6312-22/6212-22 & Kirloskar Make Pump Ksb Type 32/14 H13 & Repair Of Joints Of Rising Main 65 Mm Dia. Stage 2Nd And Rewinding Of 3 Phase Induction Make Motor 30 Hp Make Crompton 2920 Rpm & Kirloskar Make Pump Ksb Type 32/14 H13 & Repair Of Joints Of Rising Main 65 Mm Dia Stage 3Rd).
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-Oct-2026 | Terms and conditions | Other | 15-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in Drains and channels etc. in earth work including dressing of side and bed and disposing of excavated earth upto a lead 20metres and lift upto 1.5 metres disposed earth to be levelled and neatly dressed complete in all respect and to the entire satisfaction of the Engineer-in-charge. |
| 2 | Providing, Laying/Jointing & Testing in trenches ,G.I Pipe (Light grade) i.e G.I Tee,G.I union,G.I bends,G.I Elbow,G.I Sockets,G.I Nipple etc.in all respect for house service connection complete in all respect as per site measurement complete as per satisfaction of Engineer -in Charge.(earth work in trenches to be measured and paid for separately) . |
| 3 | 15 mm dia nominal Bore |
| 4 | 20 mm Dia nominal Bore |
| 5 | 25 mm Dia nominal Bore |
| 6 | Providing & Fixing 6 Sq mm copper Cable single core (Main Panel to starter & Motor) with all required connections complete in all respect all leads & lifts as per the direction of Engineer-in-Charge. |
| 7 | Providing & Fixing Bentox MEI star delta Starter of 20 HP complete in all respect as per the direction of Engineer-in-Charge. |
| 8 | Providing & Fixing of new pannel board complete in all respect as per the direction of Engineer-in-Charge. |
| 9 | Providing and fixing double flanged Cast steel Sluice Valve ( Leader make) as per ISI mark (ASA-300) cocomplete all respect as per entire satisfaction & direction of Engineer in charge. |
| 10 | 50 mm dia |
| 11 | 65 mm dia |
| 12 | Providing and fixing double flanged Cast steel NRV ( Leader make) as per ISI mark (ASA-300) cocomplete all respect as per entire satisfaction & direction of Engineer in charge. |
| 13 | 50 mm dia |
| 14 | 65 mm dia |
| 15 | Dismentalling of GI pipe (Light grade)(earth work in trenches to be measured and paid for separately)i/c all leads and lifts complete in all respect. Labour rate only. |
| 16 | 25 mm dia |
| 17 | Relaying and Jointing of GI pipe (Light grade)(earth work in trenches to be measured and paid for separately)i/c all leads and lifts complete in all respect. Labour rate only. |
| 18 | 25 mm dia |
| 19 | Providing circumferencial butt welding joints by electrical arc welding to following dia of G.I.Pipes medium/heavy class welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS:816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Advani Oerlikon (Adore)-CITOJET/ESAB make, confomring to IS:814-1991, at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of the Engineer-in-charge. (Flanges to be measured and paid for separately). |
| 20 | 25 mm dia |
| 21 | 65 mm dia |
| 22 | Providing and Fixing of brass Wheel valve diameter mentioned below in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 23 | 15 mm dia. |
| 24 | 20 mm dia. |
| 25 | 25 mm dia |
| 26 | 32 mm dia |
| 27 | Providing and Fixing of G.I. Union diameter mentioned below in all leads and lifts and to the entire satisfation of the Engineer-in-Charge. |
| 28 | 15 mm dia. |
| 29 | 20 mm dia. |
| 30 | 25 mm dia |
| 31 | 32 mm dia |
| 32 | Providing and Fixing of G.I. Socket diameter mentioned below in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 33 | 15 mm dia. |
| 34 | 20 mm dia. |
| 35 | 25 mm dia |
| 36 | 32 mm dia |
| 37 | Manufacturing, Supplying & fixing of MS sheet locking box at junction point/ distribution systeme of size 75*75*045 cm Frame fixed with angle iron of Size 40*40*50 |
| 38 | 1 Providing Installation of 7.5 HP mono submersible pumping set of reputed make such as falcon / KSB/ Calama/ SU/ BS Kirloskar / Johnston conforming to latest relevent BIS The pump should be fitted with free the impellers of suitable alloys as per BIS 5659-1978 with upto date ammendment suitable for raw/ clear water having greases packed bearing and shall with sould stator on motor side and with shaft protection specification of pump side ensuring better life for fhaft conforming to BIS specification. The pump shall be directily coupled to submersible squirrel cage electric induction motorof Kirloskar/NGEF /Jyoti/ Crompton make conforming to BIS- 9283-1979 with upto date ammendments totally dust and water proof for submersible pump duty isolated implated from the pump by intermediate casing with double mechanical seal in oil chamber and greast certificate to be attached packed bearing and provided with Stainless steel thrust bearing plate to with stand non vertical loads performace with minimum wear and tear it should also be fitted with a device to make up expa of water with heating of motor. The pump set should include water level guard i/c cable errection clamps cable clips and lifts complete in all respects. 1) Total Head: - 38 Mtrs. 2) Design Discharge (Q): - 3.50 LPS. 3) Total length: - 110.00 Mtrs. 4) Dia of R/ Main: - 65 mm. 5) Mono Submersible pump: - 7.5 HP (1 NO.) |
| 39 | Providing & Fixing new copper cable 10 Sq mm 3 Core for Mono Block pump complete in all respect i/c all leads and lifts the entire satisfaction of the Engineer-in-Charge. |
| 40 | Carriage of Mono Block pump from workshop to site i/c commissioning and testing at site complete in all respect the entire satisfaction of the Engineer-in-Charge. |
| 41 | Providing & Fixing of copper cable 70 sq. Mm 2 core (Main Panel to Starter & Motor) with all required connections complete in all respect as per the direction of Engineer-in-Charge.) |
| 42 | 70 sq mm cable. |
| 43 | Providing and Supplying Pipe wrench heavy duty ISI marked to IS:4003 latest ammendment of reputed make: i.e INDER P-333 within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 44 | Prod No. 333C 12 inch |
| 45 | Prod No. 333D 14 inch |
| 46 | Prod No. 333E 18 inch |
| 47 | Prod No. 333F 24 inch |
| 48 | Prod No. 333G 36 inch |
| 49 | Providing and Supplying Ratchet pipe threader duty ISI marked to:16176:2014 latest ammendment of reputed make: i.e INDER make heavy duty within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 50 | 15 mm to 32 mm dia. |
| 51 | 32 mm to 50 mm dia. |
| 52 | 65 mm to 80 mm dia. |
| 53 | Providing & Fixing new pump shaft with Chrome metal turning, milling & grinding complete in all respect i/c all leads and lifts. |
| 54 | Providing & Fixing new Spacer Bush casting & Fitting complete in all respect i/c all leads and lifts. |
| 55 | Providing & Fixing New diffuser Bush Casting & fitting complete in all respect i/c all leads and lifts. |
| 56 | Providing and Fixing Neck ring in pump body casting & fitting complete in all respect i/c all leads and lifts. |
| 57 | Providing & Fixing distance bush casting & fitting complete in all respect i/c all leads and lifts. |
| 58 | Providing & Fixing New coupling Set for pump L-190 (unimac) complete in all respect i/c all leads & Lifts. |
| 59 | Providing and Fixing cooling pipe with nipple long size complete in all respect i/c all leads and lifts. |
| 60 | Casting & Turning of New bearing bracket including bearing covers complete in all respect i/c all leads & Lifts. |
| 61 | Impeller Balancing complete in all respect i/c all leads and lifts. |
| 62 | Casting & Turning of new Diffuser for pump complete in all respect i/c all leads and lifts. |
| 63 | Providing & Fixing bearing 6312 SKF complete in all respect i/c all leads and lifts. |
| 64 | Providing & Fixing bearing 6305 SKF complete in all respect i/c all leads and lifts. |
| 65 | Providing & Fixing Gasket set complete in all respect i/c all leads and lifts. |
| 66 | Providing & Fixing New Impeller Casting & Turning complete in all respect i/c all leads and lifts. |
| 67 | Casting & fitting new pump bodies complete in all respect i/c all leads and lifts. |
| 68 | Providing & Fixing New shaft protection Sleeves for pump complete in all respect i/c all leads and lifts. |
| 69 | Repair of pump body brazing & turning complete in all respect i/c all leads and lifts. |
| 70 | Suction and delivery body boring as per size complete in all respect i/c all leads and lifts. |
| 71 | Complete Rewinding of 30 HP Crompton make Motor with superior Enmeied copper wire of dicaltas make copper wire Complete in all respect i/c all leads & lifts (Stage 2nd) |
| 72 | Complete Rewinding of 30 HP Crompton make Motor with superior Enmeied copper wire of dicaltas make copper wire Complete in all respect i/c all leads & lifts (Stage 3rd) |
| 73 | Providing and Fixing New glass wire for main lead (winding to connection plate) Complete in all respect i/c all leads & lifts |
| 74 | Providing and Fixing copper thimble 100 amp complete in all respect i/c all leads and lifts. |
| 75 | Providing & Fixing soldring wire of connection complete in all respect i/c all leads and lifts. |
| 76 | Providing and Fixing fiber stick for slot complete in all respect i/c all leads and lifts. |
| 77 | Providing & Sixing of terminal plate for 30 HP motor complete in all respect i/c all leads and lifts. |
| 78 | Providing & Fixing bearing for Motor 6312 SKF complete in all respect i/c all leads and lifts. |
| 79 | Providing & Fixing bearing for Motor 6310 SKF complete in all respect i/c all leads and lifts. |
| 80 | Motor cover welding, repairing and sleeve with lathe work complete in all respect i/c all leads and lifts. |
| 81 | Providing and Fixing \\"F\\" class paper complete in all respect I/C all leads lifts. |
| 82 | Providing and Fixing \\"F\\" class paper complete in all respect I/C all leads lifts. |
| 83 | Providing & Fixing insulation varnish with hardner Dr. Back make Complete in all respect i/c all leads & lifts |
| 84 | Repair of stamping slots and cemical wash complete in all respect i/c all leads and lifts. |
| 85 | Rotor Aluminum strip for die cast and firing complete in all respect i/c all leads and lifts. |
| 86 | Cariage charging of motor & Pump from pump house to workshop & Back to Pump house including commissioning & testing at site complete in all respect i/c all leads and lifts. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 15, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender