Tender For Installation Of 07 (Seven) Nos. Mini Deep Tubewell With Submersible Pump In Different Places Under Ward No-07, Amc.
Tender Value
13.50 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
3 days left
EMD
27018
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of 07 (Seven) Nos. Mini Deep Tubewell With Submersible Pump In Different Places Under Ward No-07, Amc.
BOQ
| Sl. No. | Item Description |
| 1 | Drilling and boring of pilot hole in any strata by manual means, collection of soil sampales of different strata met with during drilling at various suitable levels and preservation of samples in plythene bags / sample boxes and disposal of excess soil or mud including the cost for water etc. as required to maintain the pilot hole properly as per specification and direction of the Engineer In Charge. (A) 100 mm dia. |
| 2 | Reaming of pilot hole to an enlarged bore hole in any soil starta by manual means, disposal of excess soil or mud, including the cost for water etc. as required to maintain the bore hole properly as per specification and direction of the Engineer-in-charge, A) From 100 mm dia pilot hole to 250 mm bore hole |
| 3 | Providing and fixing of UPVC end cap suitable for UPVC'CM\\" casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer-in-charge, i) 100 mm dia |
| 4 | Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-n-charge. A)'CM'casing pipe,i) 150 mm dia |
| 5 | Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-n-charge. A)'CM'casing pipe,ii) 100 mm dia |
| 6 | Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-n-charge. B) RS pipe i) 100 mm dia |
| 7 | Providing and fixing of UPVC reducer suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer-in-charge, ii) 150x100 mm dia |
| 8 | Washing and development of tube well by using hand pump or by any suitable method and testing of the well as per specification and direction of the Engineer-in-charge. |
| 9 | Providing and shrouding of the deep tube well assembly with washed pea gravels (2.0-4.75) mm effective size) as per specifiation (IS:4097) using deep drilling rig and direction of the Engineer-in-charge, A) with contracor's high power rig i) with pea gravels obtained from Durgapur, West Bengal. |
| 10 | Fabrication of column pipe including providing &fitting fixing of G.I. flange by cutting the G.I pipe into 3.05 mtrs.size and welding the same with GI flange as per specification and direction of the Engineer-in-charge. (GI pipe will be issued by the Department at free of cost) i. For 50 mm dia GI pipe with 10 mm thick GI flange. |
| 11 | Providing and fitting fixing with PVC insulated 3 core flat copper cable conforming to relevant IS code for Submersible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge. i.2.50 sq mm. |
| 12 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses) triple pole with natural link (TPN) 415/500 Volt, L&T/Havells/BCH make etc. Complete as per specification and direction of the Engineer-in-charge. |
| 13 | Supplying and installation of water lubricated submersible pump having ISI marked of capacity 2000 GPH at total head up to 60 mtr. Cuple with submersible motor 2 HP suitable for 240 voltas (+10% variation single phase 50 HP, AC supply DOL starting method to run at 2880 RPM along with 35 mtr 2.5 sqm. PVC insulated 3 (three) core flate copper cables including fitting fixing and lowering if with 40mm dia GI pipe up to 100 FT (30,00 mtr) etc. complete as per direction ofthe Engineer-in-charge (40 mm dia GI pipe and fitting will be paid separately) |
| 14 | Supplying and fitting fixing of MS box of having size 60 cm x60cmx45 cm with slope roof and font shutter with locking arrangement fitted with 4 nos. 40 mm x40mmx6 mm MS angle of 1.60 m long including providing & fitting wooden board inside the box having size 55 cmx55cmx1\\" thick for fitting all the electrical features like starter, main switch and including cost of necessary painting and embedding the box with CC block size 30 cmx30cmx60cm with 1:2:4 (1cement:2river sand :4 jhama brick aggregate 20 mm gauge) as per direction of the Engineer-in-charge (Starter, main switch will be paid separately) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender