Tender For Renovation Of Municipal Office Building (First Floor Of Work Section)
Tender Value
57.33 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
2 days left
EMD
57400
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mayurbhanj → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Municipal Office Building (First Floor Of Work Section)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Oct-2026 | Critical Dates Changed | Date | 31-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Ground Floor |
| 2 | Earth work in excavation of foundation in hard soil with initial lead and lift etc. complete |
| 3 | Filling foundation and plinth with sand well watered and rammed with cost carriage of all materials etc. |
| 4 | C.C.(1:3:6) with 40mm CBHG metal including cost,carriage and royalty of materials |
| 5 | R.C.C. work of M-20 using 20 mm and dowm graded cb. Chips with cost carriage of all materials etc. complete. Column Base |
| 6 | Grade Beam |
| 7 | Column |
| 8 | Lintel |
| 9 | Chajja |
| 10 | Staircase |
| 11 | Roof beam |
| 12 | Roof slab |
| 13 | Supplying fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 14 | Fly ash Brick massonary in c.m. 1:6 having crushing strength 75kg/cm2 with cost carriage of all materials etc. Foundation & Plinth |
| 15 | Superstructure |
| 16 | 16 mm thick c.p. 1:6 over brick work in finished smooth with cost carriage of all materials etc. |
| 17 | 12mm thick c.p. 1:6 over brick work in finished smooth with cost carriage of all materials etc. |
| 18 | 6mm thick c.p. 1:4 for RCC work with cost of all materials and labour etc. |
| 19 | Supplying, fitting and fixing M.S. iron grill of approved design as directed by Engineer-in-charge and placing in proper position including cost, conveyance, taxes with all labour and T&P required for the work etc. complete in all respect. |
| 20 | Supplying, fitting and fixing M.S. iron grill of approved design as directed by Engineer-in-charge and placing in proper position including cost, conveyance, taxes with all labour and T&P required for the work etc. complete in all respect. |
| 21 | Fixing Vertified tiles in floor,treads &landing on 25mm. th.bed of CM(1:1) jointed with neat cement slurry etc.complete in all respect. |
| 22 | Fixing Vertified tiles in dados,skirtings & risers of steps on 12mm.th.C.P(1:3) jointed with neat cement slurry etc.complete in all respect. |
| 23 | Fixing Granite tiles in floor,treads &landing on 20mm. th.bed of CM(1:1) jointed with neat cement slurry etc.complete in all respect. |
| 24 | Supplying,fitting and fixing of stainless steel of 304 grade in hand railing using 50mm. dia.of 2mm.thick circular pipe with Balustrade of size 32mm.*32mm.*2mm. @ 0.90mtr.C/C and stain-less squre pipe bracing of size 32mm*32mm*2mm in 3 rows in staircase as per approved design and specification,buffing,polishing etc.with cost, conveyance,taxes of all materials,labour,T&P etc. required for the work complete in all respect. |
| 25 | Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC) (FENESTA/NCL VEKA LTD.) Ventilators Top Hung-60-Series duly manufactured using UPVC reinforced profiles of 60mm x 50mm x 2.5mm for outer frames, 75mm for outer frames. 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No. per set of sashes and th esystem isto be installed at the site using anchor fasteners, silicon rubber sealant,easy glazing/deglazing at site etc. including cost and conveyance of all material, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-447-95 and other applicable codes and standards.(Ref.-Office of the Engineer-In-Chife (CIVIL), Odisha Nirman Soudha,Bhubaneswar. Lt. No-16100) |
| 26 | Finishing wall surface of walls with Acrylic wall puty ( Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding & staging charges with cost of all matyerials taxes, labour T & P etc complete. Qty vide Item No.07+08 |
| 27 | Wall painting one coats with wall cement primer (water bound) etc complete with all cost. Qty vide Item No.07+08+09 |
| 28 | Wall painting two coats with plastic emulsion paint. Qty vide Item No.07 |
| 29 | Finishing walls with weather seal coat paints two coats any approved shade with cost of all materials etc. Qty vide Item No.8 |
| 30 | Painting two coats with approved paint over new wood & iron work. |
| 31 | FIRST FLOOR |
| 32 | Removing old grading plaster from roof slab cleaning the surface, lowering &removing the debris within 50m.lead. |
| 33 | R.C.C. work of M-20 using 20 mm and dowm graded cb. Chips with cost carriage of all materials etc. complete. Floor Band |
| 34 | Column |
| 35 | Lintel (10\\") |
| 36 | Chajja |
| 37 | Stair case |
| 38 | Roof beam |
| 39 | Roof slab |
| 40 | Supplying fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 41 | 2.5cm.th.grading concrete (1:2:2) on new roof slab. Roof slab |
| 42 | Fly ash Brick massonary in c.m. 1:6 having crushing strength 75kg/cm2 with cost carriage of all materials etc. Superstructure |
| 43 | Fly ash Brick massonary in c.m. 1:6 having crushing strength 75kg/cm2 with cost carriage of all materials etc. |
| 44 | Supplying,fitting and fixing of stainless steel of 304 grade in hand railing using 50mm. dia.of 2mm.thick circular pipe with Balustrade of size 32mm.*32mm.*2mm. @ 0.90mtr.C/C and stain-less squre pipe bracing of size 32mm*32mm*2mm in 3 rows in staircase as per approved design and specification,buffing,polishing etc.with cost, conveyance,taxes of all materials,labour,T&P etc. required for the work complete in all respect. |
| 45 | 16 mm thick c.p. 1:6 over brick work in finished smooth with cost carriage of all materials etc. |
| 46 | 12mm thick c.p. 1:6 over brick work in finished smooth with cost carriage of all materials etc. |
| 47 | 6mm thick c.p. 1:4 for RCC work with cost of all materials and labour etc. |
| 48 | Supplying, fitting and fixing M.S. iron grill of approved design as directed by Engineer-in-charge and placing in proper position including cost, conveyance, taxes with all labour and T&P required for the work etc. complete in all respect. |
| 49 | Fixing Vertified tiles in floor,treads &landing on 25mm.th.bed of CM(1:1) jointed with neat cement slurry etc.complete in all respect. |
| 50 | Fixing Vertified tiles in dados,skirtings & risers of steps on 12mm.th.C.P(1:3) jointed with neat cement slurry etc.complete in all respect. |
| 51 | Fixing Granite tiles in floor,treads &landing on 20mm. th.bed of CM(1:1) jointed with neat cement slurry etc.complete in all respect. |
| 52 | Fixing Granite tiles in floor,treads &landing on 10mm. th.bed of CM(1:1) jointed with neat cement slurry etc.complete in all respect. |
| 53 | Providing,fitting and fixing of false ceiling with aluminium anodised T section No.3215 with 2-0\\"centre to centre,L section No.1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the aluminium grid 2-0\\" x 2-0\\" with prelaminated particle board suspended from ceiling etc. complete.(As per revised SR 2012) |
| 54 | Supplying , fitting and fixing of openable UPVC doors with door Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC) (FENESTA/NCL VEKA LTD.) Casement Door-60-Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames 102mm x 60mm x 2.5mm casement Door Sash profile and 74mm x 60mm x 2.5mm mullion peofile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No. per set of sashes and th esystem isto be installed at the site using anchor fasteners, silicon rubber sealant,easy glazing/deglazing at site etc. including cost and conveyance of all material, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-447-95 and other applicable codes and standards. (Ref.-Office of the Engineer-In-Chife (CIVIL), Odisha Nirman Soudha,Bhubaneswar. Lt. No-16100) |
| 55 | Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC) (FENESTA/NCL VEKA LTD.) Three Track- Three panel sliding window-60-Series duly manufactured using UPVC reinforced profiles of 108mm x 45mm x 2.5mm for outer frames 75mm x 60mm x 2.25mm casement Window Sash of 39mm x 58mm x 2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using reinforced large coupler at the site using anchor fasteners, silicon rubber sealant,easy glazing/ deglazing at site etc. including cost and conveyance of all material, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-447-95 and other applicable codes and standards. (Ref.-Office of the Engineer-In-Chife (CIVIL), Odisha Nirman Soudha,Bhubaneswar. Lt. No-16100) |
| 56 | Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC) (FENESTA/NCL VEKA LTD.) Ventilators Top Hung-60-Series duly manufactured using UPVC reinforced profiles of 60mm x 50mm x 2.5mm for outer frames, 75mm for outer frames. 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No. per set of sashes and th esystem isto be installed at the site using anchor fasteners, silicon rubber sealant,easy glazing/deglazing at site etc. including cost and conveyance of all material, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-447-95 and other applicable codes and standards.(Ref.-Office of the Engineer-In-Chife (CIVIL), Odisha Nirman Soudha,Bhubaneswar. Lt. No-16100) |
| 57 | Finishing wall surface of walls with Acrylic wall puty ( Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding & staging charges with cost of all matyerials taxes, labour T & P etc complete. Qty vide Item No.08+09 |
| 58 | Wall painting one coats with wall cement primer (water bound) etc complete with all cost. Qty vide Item No.08+09+10 |
| 59 | Wall painting two coats with plastic emulsion paint. Qty vide Item No.08+10 |
| 60 | Finishing walls with weather seal coat paints two coats any approved shade with cost of all materials etc. Qty vide Item No.09 |
| 61 | Painting two coats with approved paint over new wood & iron work. |
| 62 | Purifier for water cooler chiller cum water dispenser. |
| 63 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with eater proffing cement compuond consisting of applying: (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water prooffing cement complound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with wate proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 64 | Supplying, fitting & fixing of Three seater steel chair with godrej make including transportation charges etc. |
| 65 | P.H. WORK Providing and fixing to wall ,ceiling an floor UPVC pipes class IV (8Kgf/Sqcm)/class III (6Kgf/Sqcm) conforming to IS 4985/2000 and pipe fittings of the following nominal bore with clamps including making good the damages all complete as per PH specification. (a) 20 mm dia UPVC pipe |
| 66 | (b) 25 mm dia UPVC pipe |
| 67 | Supplying all materials labour T & P for fitting fixing of following PH fitting as per PH specification & direction EIC. (a) 15 mm dia bib cock |
| 68 | Fixing Wash Basin with hole for pillar taps with cast iron brackets including cutting holes in walls and making good the damages etc. complete as per specification. Porcelain 20\\"x 16\\"(500x400) W.H.B |
| 69 | Fixing PVC Waste pipe of the following diameter for Wash Basin and Sink including brass check nut etc complete as per specification. 40mmx800mm long PVC corrugated waste pipe |
| 70 | S/F PVC foil waste pipe, waste & rain water pipe 110mm dia |
| 71 | Fixing of brass screw down stop cock etc complete as per PH specification. 20 mm PTMT concealed stop cock |
| 72 | Fixing wash down water closet,squatting pan (European type WC pan) with integral 'S' or 'P' trap conforming to IS:2556,Part.8-2004 to the floor with wooden plugand chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc complete as per specification. Porcelain A.I.W.C. with S-trap |
| 73 | Fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffets etc complete in all respect. EWC PVC standard seat cover with Jet Spray |
| 74 | Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231 with all fittings and fixtures etc complete. 10 litre PVC low level cistern with fittings |
| 75 | Fixing bowl pattern urinal conforming IS:2556 part-6 1996 including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc complete in all respect. Porcelain Flat back stall type magnum Urinal |
| 76 | S/F of PVC tank 1000 ltrs. Sintex Tank including all taxes |
| 77 | 600mm x 450mm bevelled edge mirror |
| 78 | S/F PVC fitting 110x110x110 mm single tea with dor |
| 79 | 110 mm dia door bend |
| 80 | 110 mm dia plain bend |
| 81 | 110 mm dia single junction |
| 82 | 75mm single T with door |
| 83 | 75mm door bud |
| 84 | PVC trap 100mmx75mm |
| 85 | 40mm Brass trap basin |
| 86 | Fixing PVC waste pipe (a) 40mm dia x 800mm long PVC Waste pipe. |
| 87 | PVC inlet pipe |
| 88 | CP Brass waste 40mm small for Basin |
| 89 | S/F of pillar taps including all taxes. |
| 90 | Fixing Plastic seat and cover for EWC. |
| 91 | Towel ring |
| 92 | PTMT Two in one Health Foucet |
| 93 | ELECTRIFICTION Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) Group - A (Light point) |
| 94 | Group - B (Fan point) |
| 95 | Group - C |
| 96 | Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required |
| 97 | Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/ L&T/ Anchor/Havels/V Guard) |
| 98 | Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/ L&T/ Anchor/Havels/V Guard) |
| 99 | Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/ L&T/ Anchor/Havels/V Guard) |
| 100 | Supply, Installation, Testing, and Commissioning of 32 Amp DP Main switches of following capacity(IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links,interconnections, earthing, etc. as required as per direction of Engineer in harge.MakeSEIMENS/HPL/ANCHOR/L&T/HAVELS/C& S/ RK |
| 101 | S/F. of 48\\" AC Ceiling fans complete of Usha Ergo/Baja Elegance lvory make. (a) Cost |
| 102 | (b) Labour cost |
| 103 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required |
| 104 | Supplying and laying 8 SWG copper wires ISI marked at 0.5 meter below grond level for conductor earth electrode including soldering etc. as required |
| 105 | Supplying and fixing of following piano type switch / socket on the existing switch box / cover including connections etc as required. |
| 106 | Supplying, fitting and fixing of exhaust fan including all cost. |
| 107 | Supplying, fitting and fixing of 15 watt LED round down light including all cost |
| 108 | Supplying, fitting and fixing of 15 watt LED bulb / bar light including all cost |
| 109 | SECOND FLOOR (Head Room) |
| 110 | R.C.C. work of M-20 using 20 mm and dowm graded cb. Chips with cost carriage of all materials etc. complete. Column |
| 111 | Lintel |
| 112 | Roof beam |
| 113 | Roof slab |
| 114 | Supplying fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 115 | Fly ash Brick massonary in c.m. 1:6 having crushing strength 75kg/cm2 with cost carriage of all materials etc. Superstructure |
| 116 | 16 mm thick c.p. 1:6 over brick work in finished smooth with cost carriage of all materials etc. |
| 117 | 12mm thick c.p. 1:6 over brick work in finished smooth with cost carriage of all materials etc. |
| 118 | 6mm thick c.p. 1:4 for RCC work with cost of all materials and labour etc. |
| 119 | providing fitting and fixing M.S. Door Shutter made out of M.S. angle with flat with cost of all materials etc. |
| 120 | Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC) (FENESTA/NCL VEKA LTD.) Ventilators Top Hung-60-Series duly manufactured using UPVC reinforced profiles of 60mm x 50mm x 2.5mm for outer frames, 75mm for outer frames. 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No. per set of sashes and th esystem isto be installed at the site using anchor fasteners, silicon rubber sealant,easy glazing/deglazing at site etc. including cost and conveyance of all material, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-447-95 and other applicable codes and standards.(Ref.-Office of the Engineer-In-Chife (CIVIL), Odisha Nirman Soudha,Bhubaneswar. Lt. No-16100) |
| 121 | Finishing walls with water based acrylic wall putty with any approved shade with cost of all materials etc. Qty vide Item No.04+05 |
| 122 | Wall painting one coats with wall cement primer (water bound) etc complete with all cost. Qty vide Item No.04+05+06 |
| 123 | Finishing walls with plastic emulsion paint two coats any approved shade with cost of all materials etc. Qty vide Item No.04+06 |
| 124 | Finishing walls with weather seal coat paints two coats any approved shade with cost of all materials etc. Qty vide Item No.05 |
| 125 | Painting two coats over a coat of primer with any approved shade with cost of all materials etc. |
| 126 | Cost of Photo & Signboard Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 31, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender