Tender For Repair And Renovation Of Existing Well At Nepali Basthi Near Shiv Temple, Ward No.12
Tender Value
3.07 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
8 days left
EMD
6154
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of Existing Well At Nepali Basthi Near Shiv Temple, Ward No.12
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 4 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 5 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 6 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 7 | Providing and installing 1 HP capacity pump set complete with all necessary electrical fittings, wiring, starter/control panel, cables, accessories, and connections, including testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. |
| 8 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
| 9 | 25 mm nominal outer dia. Pipes. |
| 10 | Providing and fixing CPVC Union including cutting and threading the pipe includes jointing of pipes & fittings with one step CPVC solvent cement. |
| 11 | Providing and fixing of PVC Foot Valve, 25 mm dia, Non-return type, complete with built-8 in strainer, threaded (screwed) end, suitable for water supply applications, complete in all respects |
| 12 | Providing and fixing of PVC 15 mm dia. Tap, complete with built-in strainer, threaded (screwed) end, suitable for water supply applications, complete in all respects. |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 14 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 15 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 16 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 18 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 19 | 12 mm cement plaster of mix : |
| 20 | 1:4 (1 cement: 4 fine sand) |
| 21 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 22 | 40 mm thick with 20 mm nominal size stone aggregate |
| 23 | Providing and fixing steel welded mesh/grating over the top opening of 1.70 m dia. ring well, including cutting, welding, fabrication, fixing, necessary supports, clamps/fasteners and painting with approved protective coating, complete as directed by the Engineer-in-Charge. |
| 24 | Providing and fixing a pump shed of size 1.00 m × 1.00 m at a height of 1.00 m above ground level, including providing and laying 15 cm thick concrete platform, MS pipe frame of 25 mm dia. with necessary welding and fabrication works, covering the sides and top with GI sheet, providing necessary openings with hinged shutters/doors, including all necessary clamps, fasteners, supports and accessories, complete in all respects as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender