Tender For Providing/Renovation Of Public Health Services And Providing Kitchen Equipments In The Cooking Section And Washing Area, In Kitchen On 10Th Floor And Canteen On 11Th Floor, Punjab Civil Secretariat-1, Capital Complex, Sector-1, Chandigarh
Tender Value
14.39 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
7 days left
EMD
28800
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing/Renovation Of Public Health Services And Providing Kitchen Equipments In The Cooking Section And Washing Area, In Kitchen On 10Th Floor And Canteen On 11Th Floor, Punjab Civil Secretariat-1, Capital Complex, Sector-1, Chandigarh And All Other Works Contingent Thereto. Public Health Services Package-1
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling concrete Cement concrete plain 1:4:8 or 1:5:10 |
| 2 | Dismantling concrete Cement concrete plain1:2:4 mix |
| 3 | Cement concrete 1:4:8 with stone ballast 20mm gauge with stone ballast 20mm gauge(Floor Tiles*0.07) |
| 4 | Cement concrete 1:2:4 |
| 5 | with stone ballast 20mm gauge |
| 6 | mixing by manual means(SWR Pipe*0.3*0.3) |
| 7 | Extra for pre finished nosing to treads of steps of marble stone. (Full gola, half round gola etc.) |
| 8 | 40mm thick grey terrazo topping rubbed and polished to a granolithic fincish under layer 28 mm thick cement concret 1:2:4 and top layer 12 mm thick with 7mm 10mm gauge white marble makrana chipping from indigenous marble laid in 1:1½ (50 Kg of ordinary grey cemetn and 0.05 cum of white marble chippings) |
| 9 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 10 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 11 | Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. |
| 12 | 15mm i/d |
| 13 | 20mm i/d |
| 14 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 15 | 15mm i/d |
| 16 | 20mm i/d |
| 17 | Cutting holes up to 23 cm square through B.B. in cement walls or stone masonry wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 18 | (b) Through wall 22.86 cm thick |
| 19 | Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. |
| 20 | 20mm i/d |
| 21 | Making connection with the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects. |
| 22 | Providing and fixing PVC waste pipe 32 mm i/d of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 23 | Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect. |
| 24 | Double bowl Sink without drain board Overall size 1330x515 bowl size 560x410x200mm |
| 25 | Providing & Fixing in position C.P. Brass flange of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 26 | Providing & Fixing in position C.P. Brass extension piece 25 mm long to 50 mm long of approved make (to the approval of Engineer-in-charge) with various fixtures complete in all respect. |
| 27 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. C.P. brass Bib cock long nose/ long body foam flow without flange |
| 28 | Providing and fixing in position premium rangeC.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in- charge ) complete in all respect |
| 29 | C.P.brass 15mm Angular stop cock with Wall flange |
| 30 | C.P brass Sink mixer with swinging spout.(wall mounted) |
| 31 | C.P. brass Sink Cock with regular swinging spout and wall mounted |
| 32 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 33 | PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut |
| 34 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. |
| 35 | Single Socket Type B |
| 36 | 90mm o/d SWR UPVC pipe lines laid complete |
| 37 | Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge ) |
| 38 | 90mm i/d |
| 39 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. |
| 40 | For 90mm o/d pipes |
| 41 | Elbow 90 degree (all side socket) |
| 42 | Single Tee |
| 43 | Coupler |
| 44 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. |
| 45 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. |
| 46 | (a) Size 75 mm x 75 mm |
| 47 | Dismantling Sanitary fixtures such as Eurpoean / Indian / Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. |
| 48 | Stainless Steel Sink /Mosaic Sink |
| 49 | Wall mixer / Sink Mixer / Basin Mixer / Concealed Stop Cock |
| 50 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 51 | Providing and fixing in postion storage type automatic electric water heater pressure type thermostatically controlled, single phase wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel, Inner glass lining with B-Rating minimum 3 stars complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect. |
| 52 | Vertical type 80 litre capacity water heater |
| 53 | Dismantling of Kota Stone Floor laid in cement mortar including dismantling of cement concrete base complete in all respect. |
| 54 | Dismantling of already laid Marble stone on RCC Slabs including labour and material complete in all respect. |
| 55 | Providing and installing UV Water Purifier system equipped with double purification process, with adequate storage tank of Eureka Forbes/Kent/Livpure make along with installation complete in all respect. |
| 56 | Providing and fixing of kitchen cabinetries, depth 550 mm at bottom & 300 mm at top, made out of both side laminated board 18 mm thick with 8 mm thick teak ply on front shutters, along with all accessories such as stainless steel baskets, masala rack (triple shelf), power coated metabox of make \\"Ozone/Asian Paint\\", telescopic channel 20\\" long make \\"Ozone\\", adjustable legs upto 4\\" height for bottom cabinetries and 8 mm thick glass shelf, 5 mm thick glass for shutters and clamps to fix glass in shutters for top cabinetries including rubbers wood Cornish on top, machine moulding for shutters, melamine polish, soft close hinges make \\"Ozone\\", Stainless Steel Handles 6\\" long etc. complete including carriage and labour charges for fixing at site complete in all respects. |
| 57 | Repair of existing floor traps, including all necessary labour, materials, dismantling, replacement/repair and making good, complete in all respects to the satisfaction of the Engineer-in-Charge. |
| 58 | Construction of washing area platform including material, like tiles and labour etc. complete in all respects. |
| 59 | Dismantling of RCC Slabs of various sizes complete in all respects to the satisfaction of the Engineer-in-Charge. |
| 60 | Dismantling of Marble Shelves of various sizes complete in all respects to the satisfaction of the Engineer-in-Charge. |
| 61 | Lifting of Material from Ground Floor to 10th floor including labour and equipments complete in all respects to the satisfaction of the Engineer-in-Charge.. |
| 62 | Lifting of Malba from 10th floor to Ground Floor complete in all respects to the satisfaction of the Engineer-in-Charge. |
| 63 | Carriage of Malba from site of work to Dumping Ground including loading and unloading complete in all respect to the satisfaction of the Engineer-in-Charge. |
| 64 | Less Rebate Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender