Tender For Providing Electrical Supply To Trolley And Wheelchair Shed And Installation Of Electrical Points For Jet Washer At All Levels In New Opd, Sector-12, Pgimer, Chandigarh.
Tender Value
1.99 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
4 days left
EMD
3983
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Electrical Supply To Trolley And Wheelchair Shed And Installation Of Electrical Points For Jet Washer At All Levels In New Opd, Sector-12, Pgimer, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. |
| 2 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 3 | 3 x 4 sq. mm |
| 4 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 5 | 25 mm |
| 6 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 7 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 8 | 12 way , Double door |
| 9 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 10 | Single pole |
| 11 | Triple pole and neutral |
| 12 | Earthing with G.I. earth pipe 4.5 metre long, 40mm dia including accessories, and providing masonary enclosure with cover plate and having locking arrangement and watering pipe extra with charcoal/ coke and salt as required. |
| 13 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required |
| 14 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/HDPE pipe as required. |
| 15 | Upto 35sqmm |
| 16 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct/pannel as required. |
| 17 | Upto 35sqmm |
| 18 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
| 19 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 20 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 21 | 4 X 16 sq. mm (28mm) |
| 22 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 23 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 24 | Cutting road and making good the same including supply of extra quantitites of materials i.e. aggregate, moorum screening, red bajri and labour required. |
| 25 | Bituminous portion |
| 26 | SITC of LED street Light fixture, powder coated PDC aluminum body with inbuilt driver as per the requirement with Driver efficiency >85%, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 6 KV , efficacy ≥145 lm/Watt, THD ≤ 10% , P. F.≥0.95, IP-66, IK-08/10, CRI ≥80, under voltage and over voltage protection, Light with integrated angle adjustment (no external assembly required), life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours, CCT 4000°K / 5700°K , SDCM (Standard Deviation Color Matching) <5, with Minimum 5 year OEM warranty. Including supplying and fixing of suitable dia as per fixture having 1-2 metres long G.I. pipe (medium class) bracket for mounting of street light fitting on wall including bending the pipe to the required shape, iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. System lumen LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. |
| 27 | 70 watt ± 10% |
| 28 | Supply of Aluminum conductor XLPE insulated armoured & served cable of following sizes and rating. |
| 29 | Aluminum conductor XLPE insulated armoured & served cable working voltage 1100 volts grade 4 Core, 16sqmm. |
| 30 | Supply and fixing of thermoplastic junction box outdoor type weather proof of app. size 130 x 130 x 77 having protection of IP 65/66/67 with knockouts for cable entry of size upto 6 sqmm with heavy duty connector terminals of same make of thermoplastic junction box. Including terminating of incoming and outgoings in the box. Complete in all rescpect upto the entire satisfaction of EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender