Tender For Construction Of Office Building For Rws&S Section, Astarang In Puri District.
Tender Value
34.11 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
14 days left
EMD
35000
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Puri → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Office Building For Rws&S Section, Astarang In Puri District.
BOQ
| Sl. No. | Item Description |
| 1 | A-1) Supplying all materials, labour, T&P for earth work in excavation in foundation in all kinds of soil with in 50m initial lead and1.50m initial lift including rough dressing and breaking clods to maximum5cm to 7cm in size and laying in layers not exceeding 0.30min depth and as per the direction of EIC. |
| 2 | A-2) Supplying all materials, labour, T&P for filling foundation and plinth with sand well watered and rammed including cost, cost of all labour, carriage, royalty, taxes, T&P etc complete. |
| 3 | A-3) Supplying all materials, labour, T&P and providing Cement Concrete (1:3:6) using 40mm size hard granite C.B. metal approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed by E.I.C. |
| 4 | A-4) Supplying all labour, T&P and material for Providing C.C. (1:1.5:3) using 12mm size CBHG chips for RCC works including watering, curing, hoisting, laying and conveyance of all materials to work site etc. complete as per the dirction of Engineer-in-charge. |
| 5 | A-5) Supplying all labour, T&P and material for Providing Fly ash Brick msonry work in cm (1:6) using 25x12x8 cm. size FA bricks inclduing watering, curing and conveyance of all materials to work site etc. complete as per the dirction of Engineer-in-charge.a) In Foundation up to Plinth:- |
| 6 | A-5-b) in Super Structure |
| 7 | A-6) Supplying all labour, T&P and material for Providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting etc. complete as per the dirction of Engineer-in-charge.a) Base of Column |
| 8 | A-6-b) Lintel :- |
| 9 | A-6-c) Roof Slab & Chajja :- |
| 10 | A-6-d) Beam & Column :- |
| 11 | A-6-e) Staircase :- |
| 12 | A-7) Supplying all materials,labour,T&P for MS reinforcement for RCC work including cutting , bending, binding and tying the grills and placing in position including cost of binding wire 18-20 guage as per specification etc all complete as per direction of E.I.C. |
| 13 | A-8) Supplying all materials labour T&P and providing 12mm thick cement plaster (1:6) over brick masonary to the inside smooth surface including cost carriage and royality of all materials etc all comlete as per the direction of EIC. |
| 14 | A-9) Supplying all materials labour T&P and providing 16mm thick cement plaster (1:6) over brick masonary to the outside rough surface including cost carriage and royality of all materials etc all comlete as per the direction of EIC. |
| 15 | A-10) Supplying all labour, T&P and material for Providing 12 CP with Bitumen Painting in cement plaster (1:4) over wall including watering, curing etc. all complete as per the dirction of Engineer-in-charge. |
| 16 | A-11) Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved qualiy including cost of all materials, labour T&P etc required for the work all complete as per the dirction of Engineer-in-charge. |
| 17 | A-12) Providing & Fixing ceramic glazed tiles in walls, dadoes skirting and risers of steps on 12mm thick bed of cement mortar( 1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete etc. as per direction of Engineer in Charge. |
| 18 | A-13) Supplying all labour, T&P and material for Providing and fixing 5cm. thick RCC jalley in position as per the dirction of Engineer-in-charge. |
| 19 | A-14) Supplying all labour, T&P and material for Providing G.I. Grills as per specification as per the dirction of Engineer-in-charge. |
| 20 | A-15) Iron work wrought and put in window grating including drilling holes in chowkathas including all cost of materials and labours etc. all complete. |
| 21 | A-16) Supplying all labour, T&P and material for Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete as per the specification and direction of Engineer-in-charge. |
| 22 | A-17) Supplying all materials, labour T&P and providing Wall painting 2 coats with plastic emulsion paint of approved shade over one coat of primer including cost of paint , scaffolding ,staging & cost of all materials , labour etc.complete as per direction of Engineer-in-charge. |
| 23 | A-18) Supplying all materials, labour T&P and Finishing wall with water proofing Weather coat over one caot primer two coats including cost of cemnt paint out side etc.complete as per direction of the Engineer-in-charge. |
| 24 | A-19) Supplying all labour, T&P and material for Painting two coats to MS Grills with any approved paint over one coat of primer as per the dirction of Engineer-in-charge. |
| 25 | A-20) Supplying, fitting, fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Window / Ventilator / Top Hung - 60 - Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames, 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessiries, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards etc. complete as per direction of the Engineer-In-Charge. |
| 26 | A-21) Supplying, fiting and fixing ISI mark 35mm thick flush door shutter confirming to IS 2202(part-I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross band and face veneer of both faces shutter of approved design and quality including cost of all door fittings and fixtures etc. complete. |
| 27 | A-22) Supplying, fitting, fixing of Stainless Steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90mtr C/C and staineless square pipe bracing of size 32mmx32mmx 2mm in 3 rows in stair case as per approved design and specification,buffling polishing etc including all cost of labour, T&P, hire charges of of drilling machine, labour charges etc. complete as per direction of Engineer-in-charge. |
| 28 | A-23) Providing and laying of 60 mm thick factory made cement concrete interlocking paver block of M35 grade and approved make variety colour and size made by block making machine with strong vibratory compaction of approved design and shape laid in required colour and pattern over 50mm thick compacted bed of coarse sand filling the joints with lime sand etc all complete including cost conveyance, royalty taxes of all materials labour T&P etc complete as directed by the Engineer-in-charge. |
| 29 | B. WATER SUPPLY & SANITARY INSTALLATION WORKB-1) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes confirming to Is : 15778 having thermal stability for hot & cold water supply, including all CPVC plain & brass threades fitting including fixing the pipe with clamps at 1:00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of EIC.a) 25 mm dia CPVC pipe |
| 30 | B-2)Providing & laying in trenches unplastisized PVC pipes confirming to IS:4985 - 2000 and specials of the following out side diametre for all classes including jointing with supply of approved solvent cement by non heat application method including testing as per specification complete.a) 110 mm dia D/S SWR Pipe |
| 31 | B-2-b) 75 mm dia D/S SWR Pipe |
| 32 | B-3) Providing and fixing of Brass Ball Valve (Hirizontal plunger type) confirming to IS : 1703-1977 as per specification complete. |
| 33 | B-4) Providing and fixing of brass screw-down bib cocks (tapes) polished bright confirming to IS : 781 - 1995 of following nominal size as per specification complete.a) 15 mm dia CP brass long body bib cock |
| 34 | B-4-b) 25mm dia UPVC-ASTM Standard (Sch-80) |
| 35 | B-5) Providing Rotational moulded polyethylene cylindrical vertical water storage tanks confirming to IS : 12701 - 1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra socket and jam nut, fixing ball valve etc. including hosting upto a height of 5 mtrs above ground level and placing the tank to the required position etc. all complete as per specification and direction of EIC. |
| 36 | B-6) Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per specification. |
| 37 | B-7) Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete. |
| 38 | B-8) Supplying & fixing wash basin with hole for pillar taps confirming to IS 2556 : part 4-2004 with cast iron or MS bracket painted white including cutting holes in walls and making good the damages etc all complete as per specification. |
| 39 | B-9) Supplying & fixing padestal for wash basin complete recessed at the back for the reception of pipes and fittings all complete as per the direction of EIC. |
| 40 | B-10) Supplying & fixing Pillar Taps capstan head screw down high pressure lettered 'hot' and 'cold' with long screws, shank and back nurs of the following nominal bore as per specification. |
| 41 | B-11) Supplying & fixing wash down water closet (European type W.C. pan) with integral 'S' or 'P' trap confirming to IS : 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per the specification. (seat and cover to be measured and paid separately.) |
| 42 | B-12) Providing and fixing PVC low level flushing cistern with manually controlled delivery (handle lever) confirming to IS : 7231, with all fitting and fixures complete. |
| 43 | B-13) Supplying & fixing bowl pattern urinal confirming to IS : 2556 : Part 6-1996 including connecting the urina of 430 x 260 x 350 mm or 340 x 410 x 265 mm size respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per the specification. |
| 44 | B-14) Supplying & fixing chromium plated brass shower rose with 15 mm or 20 mm inlet including polishing all complete as per specification. |
| 45 | B-15) Supplying & fixing standard size chromium plated brass towel ring fixed to wooden plug with chromium plated brass screws complete as per specification |
| 46 | B-16) Supplying & fixing standard sized chromium plated towel rail complete with chromium plated brass bracket fixed to wooden plugs with chromium plated brass screws, complete as per specification. |
| 47 | B-17) Supplyng & fixing (a) liquid soap container - glass container or plastic container with chromium plated brass lid and bracket fixed to wooden plugs with chromium plated brass screws or (b) chromium plated brass soap dish complete with chromium plated brass brackets fixed to wooden plug with chromium plated brass screws as per specification.a) Liquid soap container |
| 48 | B-17-b) CP soap holder |
| 49 | B-18) Supplying & fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 6 mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with cromium plated brass screws and washers complete as per specification. |
| 50 | B-19) Supplying all materials, labour, T & P for lowering and testing of 1.00 HP vertical submerssible pump set with 25 mm dia PVC column pipe and covering the top of tube well with CI bore cap, connected with delivery pipe line including making all required lectrical connection with control panel and main swithch etc. all complete,as per the necessity and as per the direction of EIC. a) 1.00 HP vertical submerssible pump set Q = 60 lpm, H = 65 mtr., single phase |
| 51 | B-19-b)1.00 HP control panel |
| 52 | B-19-c) 32 mm dia column pipe (HDPE) |
| 53 | B-19-d) 1.50 sqmm submerssible cable |
| 54 | B-19-e) Insulated wire rope |
| 55 | B-19-f) 32 mm dia SS adoptor |
| 56 | B-19-g) Labour Charges for lowering & testing |
| 57 | C. COSTRUCTION OF SEPTIC TANKC-1) Supplying all materials, labour, T&P for earth work in excavation in foundation in all kinds of soil with in 50m initial lead and1.50m initial lift including rough dressing and breaking clods to maximum5cm to 7cm in size and laying in layers not exceeding 0.30min depth and as per the direction of EIC. a) 1st Depth ( 0.00M to 1.50 M below GL) |
| 58 | C-1-b) 2nd Depth ( 1.50M to 3.00 M below GL) |
| 59 | C-2) Supplying all materials, labour, T&P and providing Cement Concrete (1:4:8) using 40mm size hard granite C.B. metal approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed by E.I.C. |
| 60 | C-3) Supplying all materials, labour, T&P and providing Cement Concrete (1:2:4) using 12mm size hard granite C.B. metal approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed by E.I.C. |
| 61 | C-4) Supplying all labour, T&P and material for Providing Fly ash Brick msonry work in cm (1:6) using 25x12x8 cm. size FA bricks inclduing watering, curing and conveyance of all materials to work site etc. complete as per the dirction of Engineer-in-charge.a) In Foundation up to Plinth:- |
| 62 | C-6) Supplying all materials labour T&P and providing 12mm thick cement plaster (1:4) over brick masonary to the outside smooth surface including cost carriage and royality of all materials etc all comlete as per the direction of EIC. |
| 63 | C-7) Supplying all labour, T&P and material for Cement punning over plastering work including all cost, conveyance, royalty & taxes of all materials & labours etc. all complete as per the direction of E.I.C. |
| 64 | C-8) Supplying all labour, T&P and material for Providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting etc. complete as per the dirction of Engineer-in-charge.a) Roof slab |
| 65 | C-9) Supplying all labour, T&P and material for Providing C.C. (1:1.5:3) using 12mm size CBHG chips for RCC works including watering, curing, hoisting, laying and conveyance of all materials to work site etc. complete as per the dirction of Engineer-in-charge. |
| 66 | C-10) Supplying all materials,labour,T&P for MS reinforcement for RCC work including cutting , bending, binding and tying the grills and placing in position including cost of binding wire 18-20 guage as per specification etc all complete as per direction of E.I.C. |
| 67 | D. CONSTRUCTION OF SOAK PITD-1) Supplying all materials, labour, T&P for earth work in excavation in foundation in all kinds of soil with in 50m initial lead and1.50m initial lift including rough dressing and breaking clods to maximum5cm to 7cm in size and laying in layers not exceeding 0.30min depth and as per the direction of EIC. |
| 68 | D-2) Supplying all materials, labour, T&P for Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general |
| 69 | D-3) Supplying all materials, labour, T&P for Dry brick khoa Filling including cost, cost of all labour, carriage, royalty, taxes, T&P etc complete. |
| 70 | D-4) Supplying all materials & labour T&P for making of RCC ring 5 nos. (each 1.20 mtr. dia × 40 mm thick × 0.30 mtr. height ) including transportation to site with all cost of materials & labours for construction etc all complete. |
| 71 | D-4) Supplying all materials & labour for precast RCC cover slab of 1.00 mtr. initernal dia & 40 mm to 50 mm thick including transportation to site with all cost of labour & materials etc. all complete. |
| 72 | E. CONSTRUCTION OF MANHOLE CHAMBERE-1) Supplying all materials, labour, T&P for earth work in excavation in foundation in all kinds of soil with in 50m initial lead and1.50m initial lift including rough dressing and breaking clods to maximum5cm to 7cm in size and laying in layers not exceeding 0.30min depth and as per the direction of EIC. |
| 73 | E-2) Supplying all materials, labour, T&P and providing Cement Concrete (1:4:8) using 40mm size hard granite C.B. metal approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed by E.I.C. |
| 74 | E-3) Supplying all materials labour T&P and providing Brick work with Fly Ash bricks of 25cm x 12cm x 8cm size in cement mortar (1:6) in Foundation and superstructure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 75 | E-4) Supplying all labour, T&P and material for Providing C.C. (1:2:4) using 12mm size CBHG chips for RCC works including watering, curing, hoisting, laying and conveyance of all materials to work site etc. complete as per the dirction of Engineer-in-charge. |
| 76 | E-5) Supplying all materials labour T&P and providing 12mm thick cement plaster (1:4) over brick masonary to the outside smooth surface including cost carriage and royality of all materials etc all comlete as per the direction of EIC. |
| 77 | E-6) Supplying all labour, T&P and material for Cement punning over plastering work including all cost, conveyance, royalty & taxes of all materials & labours etc. all complete as per the direction of E.I.C. |
| 78 | E-7) Supplying all labour, T&P and material for Providing C.C. (1:1.5:3) using 12mm size CBHG chips for RCC works including watering, curing, hoisting, laying and conveyance of all materials to work site etc. complete as per the dirction of Engineer-in-charge. |
| 79 | E-8) Supplying all materials,labour,T&P for MS reinforcement for RCC work including cutting , bending, binding and tying the grills and placing in position including cost of binding wire 18-20 guage as per specification etc all complete as per direction of E.I.C. |
| 80 | F. INTERNAL ELECTRIFICATION WORKF-1) Supply, Installation, Testing, and Commissioning of 100 Amp TPN Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge.Make- SEIMENS/HPL/ANCHOR/L&T/HAVELS/C & S/ RK |
| 81 | F-2) Supply and fixing of following rating four pole (three phase and neutral) 240 V residual current break (RCCB) having a sensitivity current up to 300 milli ampere in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required. |
| 82 | F-3) Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR)a) 12 WAY, SPN, Double Door, MCB DB |
| 83 | F-4) Supply and fixing of 5 amp to 32 amp rating 240 V \\"B\\" series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.a) 32 amp rating SPN MCB \\"B\\" series |
| 84 | F-4-b) 63 amp2 pole isolator |
| 85 | F-5) Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/ L&T/ Anchor/ Havels/ V Guard) |
| 86 | F-6) Recessed wiring to sub-main in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confiriming to IS 694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1 x 1.5 sqm.mm FR PVC insulated single core multistrand copper conductor as earth wire. as required (Make of wire Finolex / L&T / Anchor / Havels / V.Guard) |
| 87 | F-7) Supply and drawing of 1.5 sqmm. single core copper conductor FR PVC insulated single core multistrand copper conductor in existing surface / recessed STEEL/PVC conduit as required. |
| 88 | F-8) Recessed wiring to light point / fan point / exhust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexible conduit with 5 amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bake lite cover of suitable size MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earthing wire including all accessories and as per direction of EIC (Make of wire Finolex / L&T / Anchor / Havels / V.Guard)a) Short Point |
| 89 | F-8-b) Medium point |
| 90 | F-8-c) Long point |
| 91 | F-9) Supplying and fixing of Modular base & cover of following sizes (nominal size) on surface / recess including cutting the wall and making good the same in case of recessed conduit as requireda) Modular base & cover for 12 module |
| 92 | F-9-b) Modular base & cover for 8 module |
| 93 | F-9-c) Modular base & cover for 4 module |
| 94 | F-9-d) Modular base & cover for 2 module |
| 95 | F-10) Supply and fixing of following piana type modular switch/ socket on the existing switch bos/ cover including connection etc as required.a) 5 pin 15/ 16 amp modular socket outlet |
| 96 | F-10-b) 15/ 16 amp modular switch |
| 97 | F-10-c) 3 pin 5/ 6 amp modular socket outlet |
| 98 | F-10-d) 5/ 6 amp modular switch |
| 99 | F-11) Supplying and fixing of 3 pin, 5 amp ceiling rose ISI marked on the existing junction box / wooden block including connection etc. as required |
| 100 | F-12) Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required. |
| 101 | F-13) Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required. |
| 102 | F-14) Installation, testing and commissioning of exhaust fan up to 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required. |
| 103 | F-15) Installation, Testing and Commissioning of pre-wired compact fluorescent fitting of all sizes complete with all accessories and tube etc. directly on ceiling wall, including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.a) 18 watt batten fluorescent tube |
| 104 | F-15-b) 50 watt LED street light |
| 105 | F-16) Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required |
| 106 | F-17) Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender