Tender For Setting Up Of New Medical Gas Plant At Jipmer-Ramanathapuram, Puducherry.
Tender Value
22.55 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
14 days left
EMD
45102
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pondicherry → Puducherry
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Setting Up Of New Medical Gas Plant At Jipmer-Ramanathapuram, Puducherry.
BOQ
| Sl. No. | Item Description |
| 1 | VOLUME V - BILL OF QUANITITY/ PRICE BID Notice Inviting Tender : HITES/FM/JIP/MGPS/2026-27/02 Dated: 06.10.2026 Name of the Work :Setting up of New Medical Gas Plant at JIPMER-Ramanathapuram, Puducherry. Name of the Vendor : S.NO DESCRIPTION OF WORK UOM QTY Basic Rate Total Amount |
| 2 | Supplying, Installation, Testing and commissioning of 5 HP Vacuum pump mounted on the base, with all necessary controls, drainage traps, bacterial filters, Anti Vibration mountings and individual exhaust lines. The vacuum system shall in all respects comply with the recommendation made in HTM stanndards. The pump should be of rotary vane/ Reciprocating/Rotary Screw /Scroll pumps each of which shall be capable of independently producing designed systems flow rate. The pump shall have a built in non-return valve and pressure switch such that inadvertent reversal of the motor will not pressurize the reservoir or the distribution system. Pump should be capable of providing a vacuum of not less than 600 mm Hg (80 kPa). |
| 3 | Supplying, Installation, Testing and commissioning of 500 litre Vacuum compressor tank with differential pressure indications. |
| 4 | Supplying, Installation, Testing and commissioning of 5 HP Air Compressor operating at a minimum pressure of 4 Bar with Anti Vibration mountings, filter, non-return Valve, isolation valves etc. Each compressor shall be capable of supplying the system design flow rate on its own. An inlet filter and silencer shall be fitted to the outlets of each compressor. |
| 5 | Supplying, Installation, Testing and commissioning of 500 litre Air Receiver tank. The vessel shall incorporate all suitable lifting lugs and mounting feet and shall be complete with a relief valve, fusible plug and an automatic drain with manual by pass. |
| 6 | Supplying, Installation, Testing and commissioning of Desiccant 60 CFM Air Dryer With Filter, Each dryer assembly shall incorporate a dew point alarm to enable automatic changeover to the stand by dryer, in the event of changes in the dew point set range. |
| 7 | Supply and Installation of Air Cooler Tower Fan. |
| 8 | Supplying, Installation, Testing and commissioning of 5+5 Oxygen Manifold system with high-pressure copper annealed tail pipes with end brass adapter suitable for oxygen cylinders and manifold. 5 cylinder manifold bank as left side and 5cylinder manifold bank as right side complete with 10 nos. of pig tail pipes and required amount of non-return valves. |
| 9 | Supplying, Installation, Testing and commissioning of Semi-automatic control panel for Oxygen and the Manifold control panel should be digital/analog without fluctuation in delivery supply line pressure. The control panel should have a microprocessor based digital /analog display panel. |
| 10 | Supplying, Installation, Testing and commissioning of Emergency 5 OxygenManifold System. |
| 11 | Supplying, Installation, Testing and commissioning of Piston Type Oxygen Regulator for Emergency Manifold. |
| 12 | Supplying, Installation, Testing and commissioning of 1+1 N2O Manifold with tailpipe, Non Return valve and MOX Regulator. |
| 13 | Supplying, Installation, Testing and commissioning of Single N20 Manifold with tailpipe, Non Return valve and MOX Regulator. |
| 14 | Supplying, Installation, Testing and commissioning of Single Arm Medical Gas pendent with 0-330 degree level rotation, extension arm and terminal which includes Medical gas outlets Oxygen: 2 nos, Vacuum: 2 nos, Medical air: 2 nos, N2O: 2 nos, Electrical 5-15 amps switch and socket:10nos. The pendent should be of Ceiling mounted installation reliable and firm with a net weight of 150kgs and ward vacuum unit clamps. |
| 15 | Supply and installation of DIN outlet for Oxygen - 9 Nos , Vacuum - 10 Nos , AIR - 2 Nos and N2O - 2 Nos. |
| 16 | Supplying, Laying and Testing of solid drawn seamless, deoxidized, non arsenical, hard, tempered and degreased copper pipes as per approved Medical standards. The work shall include all type of specials (same grade) like tee elbow coupler reducer etc, laying of pipes on ceiling/walls including painting of copper pipe with code colour, suitable gas welding etc. and complete pressure testing. The copper pipelines should be tested to be suitable for a steam working pressure of 17.34 kg./cm2 (17 bar) and conform to BS 864 Standard with specially made for brazed socket type connection. |
| 17 | 28mm dia x 1mm thick Medical gas pipeline |
| 18 | 22mm dia x 1mm thick Medical gas pipeline |
| 19 | 15mm dia x 1mm thick Medical gas pipeline |
| 20 | 12mm dia x 1mm thick Medical gas pipeline |
| 21 | Supply and fixing of Single O2 Flowmeter and Humidifier with Probe. |
| 22 | Supply and fixing of 600ml ward vacuum suction jar with regulator and probe full set. |
| 23 | Supplying, Installation, Testing and commissioning of 4 gas Medical alarm box with digital display, necessary fittings etc |
| 24 | Supply and fixing of Bed head panel 17 Feet with double railing Din Outlet Oxygen-6 Nos., Vacuum- 3, Air - 3 Railing Suction Bracket -3 No. and 2 Set of 9Module Switch and Socket. |
| 25 | Supply and fixing of 8mm threaded rod & holding slotted channel including anger fastener with nut and washer. |
| 26 | Supplying and fixing of 28mm Isolation Valve with necessary fittings. |
| 27 | Supplying and fixing of 22mm Isolation Valve with necessary fittings. |
| 28 | Supplying and fixing of 15mm Isolation Valve with necessary fittings. |
| 29 | Supplying and Installation of Janatic regulator type Pressure Reducing Station (PRS System) for Air Compressor including isolation valve with necessary fittings. Sub Total 0.0 GST 18% on Sub Total 0.0 Total 0.0 Total Amount in words : No Rupees Only Note: The Bidder, at the Bidder’s own responsibility and risk, is encouraged to visit the Site of Works and obtain all information necessary for preparing the Bid. The Bidder shall quote his price which should include GST. In case of discrepancy in the rates quoted in words and figures, the rates in words will be considered for evaluation. Signature of Bidder with Seal and Date |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender