Tender For Certain Repair/ Replacement Including Painting, Polishing, Recanning Of Wooden And Steel Furniture And Conversion Of Charpoy Gi With Nylon Newar To Charpoy Gi Pipe With Plywood Top And Allied Works At Jutogh, Shimla, Kufri, Rms Chail, Sanj
Tender Value
35 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
9 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair/ Replacement Including Painting, Polishing, Recanning Of Wooden And Steel Furniture And Conversion Of Charpoy Gi With Nylon Newar To Charpoy Gi Pipe With Plywood Top And Allied Works At Jutogh, Shimla, Kufri, Rms Chail, Sanjauli And Mil Stn Kalka Under Ge (I) Jutogh
BOQ
| Sl. No. | Item Description |
| 1 | CHAIR EASY DRD NO: FD-229 Removing old unserviceable plastic cane form chair Easy (Seat & Back) and providing new white colour plastic cane of Make Premier/B.R/Arihant/Shah size 2mm to 2.5mm wide, 0.40mm thick half round for weaving in godrej pattern including removal of old cane complete all as specified and directed. |
| 2 | Replacement of old unserviceable front leg from existing Chair easy and supply and fixing the same size new front leg made out of Ist class hard wood shisham to chair easy duly french polished all as shown on drawing complete all as specified and directed. |
| 3 | All as per Srl item No. 1.01 above but rear leg of chair easy. |
| 4 | All as per Srl item No. 1.01 above but fillet (wooden member of shisham wood of section 20mm x 15mm duly holed for caning seat and back as per Godrej pattern)of chair easy. |
| 5 | All as per Srl item No. 1.01 above but arm of chair easy. |
| 6 | All as per Srl item No. 1.01 above but front/ back/ side rail of chair easy. |
| 7 | CHAIR DINING DRD NO: FD-279 Removing old unserviceable plastic cane form chair Dining (Seat) and providing new white colour plastic cane of Make Premier/B.R/Arihant/Shah size 2mm to 2.5mm wide, 0.40mm thick half round for weaving in godrej pattern including removal of old cane complete all as specified and directed. |
| 8 | Replacement of old unserviceable front leg from existing Chair dining and supply and fixing the same size new front leg made out of Ist class hard wood shisham to chair dining duly french polished all as shown on drawing, complete all as specified and directed. |
| 9 | All as per Srl item No. 2.01 above but rear leg of chair dining. |
| 10 | All as per Srl item No. 2.01 above but front/back/side rail of chair dining. |
| 11 | All as per Srl item No. 2.01 above but back rest (i.e. horizontal wooden members for back rest of size 45mm x 35mm ) of chair dining. |
| 12 | All as per Srl item No. 2.01 above but stiffener between front leg to rear leg of chair dining. |
| 13 | All as per Srl item No. 2.01 above but stiffener for jointing to side stiffeners of chair dining. |
| 14 | CHAIR WRITING DRG NO: FD-280Removing old unserviceable plastic cane form chair Writing (Seat) and providing new white colour plastic cane of Make Premier/B.R/Arihant/Shah size 2mm to 2.5mm wide, 0.40mm thick half round for weaving in godrej pattern including removal of old cane complete all as specified and directed. |
| 15 | Replacement of old unserviceable front leg from existing Chair writing and supply and fixing the same size new front leg made out of Ist class hard wood shisham to chair writing duly french polished all as shown on drawing complete all as specified and directed. |
| 16 | All as per Srl item No. 3.01 above but rear leg of chair writing. |
| 17 | All as per Srl item No. 3.01 above but front/back/side rail chair writing. |
| 18 | All as per Srl item No. 3.01 above but back rest (i.e. horizontal wooden members for back rest size as per drawing) chair writing. |
| 19 | All as per Srl item No. 3.01 above but stiffener between front leg and rear leg chair writing. |
| 20 | All as per Srl item No. 3.01 above but arm of chair writing. |
| 21 | CHAIR DINNING PVC SEAT MAP DRG NO: FD/MAP-II/05Chair dining (Seat) M&L for removing old unserviceable plastic seat and supplying and fixing new plastic seat by means of adequate steel screw complete all as specified and directed. |
| 22 | Replacement of old unserviceable front leg from existing Chair Dining MAP Pvc Seat and supply and fixing the same size new front leg made out of Ist class hard wood shisham to chair Dining Map Pvc Seat duly french polished, complete all as specified and directed. |
| 23 | All as per Srl item No. 4.00 above but rear leg of chair dining MAP Pvc Seat. |
| 24 | All as per Srl item No. 4.00 above but front/back/side rail chair dining MAP PVC Seat. |
| 25 | All as per Srl item No. 4.01 above but stiffener of size 25mm x 25mm. |
| 26 | BED PLY TOP WOODEN DRG NO: FD-246 & 247Removing of old damaged top (12mm thick plywood) from Bed and supply and fixing new top of same size of 12mm thick commercial ply wood (ISI marked) over bed with screws, complete all as specified and directed. |
| 27 | Removal of old damaged long rail from bed and supply and fixing new long rail with rounded edges of size 1980x75x50mm of hard wood shisham and fixing the same as shown on drawing including one coat of french polish after preparing the surface by sand paper complete all as specified and directed. |
| 28 | All as per Srl item No. 5.01 above but stiffener of size 760x40x50mm. |
| 29 | Removing of old unserviceable head rest from bed ply top and S&F new head rest made out of Ist class hard wood shisham including provision of 6 mm thick commercial plywood with 1mm thick sun mica top with both side MNF arrangement and fixing the same all as shown on drawing including one coat of french polish. |
| 30 | All as per Srl item No. 5.03 above but foot rest. |
| 31 | SIDE BOARD DRG NO: FD-241Removing of old unserviceable top from Side board and supply and fixing new top made out of 18/19mm thick pre-laminated particle board , teak faced with 4mm thick teak wood beading all-around the top of side boards shown on drawings complete all as specified and directed. |
| 32 | All as per Srl item No. 6.00 above but door of side board including aluminium anodized knob and piano type hignes. |
| 33 | Removing of old unserviceable side from Side board and supply and fixing new side made out of 18/19mm thick pre-laminated particle board, teak faced to side board all as shown on drawing and as directed. |
| 34 | Removing of old unserviceable back ply of side board and supply and fixing the new back ply of same size made out of 6mm thick commercial plywood (ISI marked) all as shown in drawing and as directed. |
| 35 | Replacement of unserviceable drawer with new drawer of same size and shape. Front of the drawer shall be made out of 18mm thick. pre-lamianted particle board teak faced and including aluminium anodized knob.Sides,base and back of drawer made out of 12mm thick ply wood (ISI marked) and fixing all as shown in drawing including one coat of french polish. |
| 36 | BIN LINEN MULTI PURPOSE WITH IRONING BOARD DRG NO: FD/E6/MAP/09Removal of old damaged top from Bin soiled linen large and supply and fixing the new top of same size made out of 12mm thick plywood (ISI marked) fixing complete all as specified and directed. . |
| 37 | Removal of old unserviceable back plywood from Bin soiled linen large and supply and fixing the new back ply of same size of 6mm thick commercial plywood (ISI marked ) all as shown in drawing including one coat of french polish a all as specified and as directed. |
| 38 | Removal of old unserviceable wire mesh from Bin soiled linen large and supply and fixing with nails the new wire mesh of same size all as shown in drawing and as directed by Engineer-in-charge. |
| 39 | TABLE DRESSING LADIES WITH MIRROR DRG NO: FD-251 FD/MAP-II/07Removing of old unserviceable looking mirror from table dressing ladies with mirror and supplying and fixing new looking mirror of size 750 x 450 x 5mm thick of modi-gurard duly fixed in and including frame of teak wood and polishing complete all as specified and directed. . |
| 40 | Removing unserviceable glass shelves from dressing mirror gents ladies and S&F glass shelves in dressing mirror Gents of approx size 585mm long x 90mm wide x5mm thick of approved quality complete all as specified and directed. |
| 41 | PEG TABLE DRG NO: FD-277/384Removing of old unserviceable top from peg table and supply and fixing new top made out of 18/19mm thick pre-laminated particle board , teak faced with 4mm thick teak wood beading all-around the top of peg table complete all as specified and directed. |
| 42 | Replacement of old unserviceable leg from existing peg table and supply and fixing the same size new leg made out of Ist class hard wood shisham to peg table duly french polished complete all as specified and directed. |
| 43 | All as per Srl item No. 9.01 above but long rail. |
| 44 | All as per Srl item No. 9.01 above but short rail. |
| 45 | All as per Srl item No. 9.01 above but stiffener of peg table. |
| 46 | TABLE CENTRE DRG NO: FD-274Removing of old unserviceable top from table centre and supply and fixing new top made out of 18/19mm thick pre-laminated particle board , teak faced with 4mm thick teak wood beading all-around the top of table centre complete all as specified and directed. . |
| 47 | Replacement of old unserviceable leg from existing table centre and supply and fixing the same size new leg made out of Ist class hard wood shisham to table centre duly french polished complete all as specified and directed. |
| 48 | All as per Srl item No. 10.01 above but long rail. |
| 49 | All as per Srl item No. 10.01 above but short rail. |
| 50 | All as per Srl item No. 10.01 above but stiffener of table centre. |
| 51 | TABLE BED SIDE DRG NO: FD-276, HFD-2006Removingl of old unserviceable top from table bed side and supply and fixing the new new top of same size made out of 18/19 mm thick pre-laminated particle board teak faced complete all as specified and directed. |
| 52 | All as per Srl item No. 11.00 above but side of table bed side. |
| 53 | Removal of old unserviceable shelves from table from bed side and supply and fixing the new shelf made out of 12mm thick pre-laminated particle board teak faced of same size, complete all as specified and directed. |
| 54 | Removing of old unserviceable back ply from table bed side and supply and fixing the new back ply of same size of 6mm thick commercical plywood (ISI marked) all as shown in drawing including one coat of french polish complete all as specified and directed. |
| 55 | TEAPOY WOODEN DRG No: FD-232/278 Removing of old unserviceable top from Teapoy and supply and fixing new top made out of 18/19mm thick pre-laminated particle board , teak faced with 4mm thick teak wood beading all-around the top of teapoy wooden complete all as specified and directed. |
| 56 | Replacement of old unserviceable leg from existing Teapoy wooden and supply and fixing the same size new leg made out of Ist class hard wood shisham to teapoy wooden duly french polished complete all as specified and directed. |
| 57 | All as per Srl item No. 12.01 above but long rail. |
| 58 | All as per Srl item No. 12.01 above but short rail. |
| 59 | All as per Srl item No. 12.01 above but stiffener of teapoy wooden. |
| 60 | TABLE WRITING DRG NO: FD-275Removing of old unserviceable top from Table writing and supply and fixing new top made out of 18/19mm thick pre-laminated particle board , teak faced with 4mm thick teak wood beading all-around the top of table writing complete all as specified and directed. |
| 61 | Removal of old damaged door complete from table writing and supply and fixing the new door of same size with piano type hinges made out of 18/19mm thick pre-laminated particle board top all as shown in drawing including one coat of french polish and including aluminium anodised Knob complete all as specified and directed. |
| 62 | Replacement of unserviceable drawer with new drawer of same size and shape to table writing. Front of the drawer shall be made out of 18mm thick. pre-lamianted particle board teak faced and including aluminium anodized knob. Sides, base and back of drawer made out of 12mm thick ply wood (ISI marked) and fixing all as shown in drawing including one coat of french polish, complete all as specified and directed. |
| 63 | Replacement of unserviceable leg of table writing with new leg made out of Ist class hard wood shisham all as shown on drawing including one coat of french polish complete all as specified and directed. |
| 64 | Removal of old unserviceable back ply of table writing and supply and fixing the new back ply of same size of 6mm thick commercial plywood (ISI marked) all as shown in drawing including one coat of french polish complete all as specified and directed. |
| 65 | All as per Srl item No. 13.01 above but side ply. |
| 66 | TABLE DINING 4 PERSONS DRG NO: FD/MAP-II/03Removing of old unserviceable top from Table dining 06 persons and supply and fixing new top made out of 18/19mm thick pre-laminated particle board , teak faced with 4mm thick teak wood beading all-around the top of table dining 06 persons, complete all as specified and directed. |
| 67 | Replacement of old unserviceable leg from existing Table dining 06 persons and supply and fixing the same size new leg made out of Ist class hard wood shisham to table dining 06 persons duly french polished complete all as specified and directed. |
| 68 | All as per Srl item No. 14.01 above but long rail. |
| 69 | All as per Srl item No. 14.01 above but short rail. |
| 70 | All as per Srl item No. 14.01 above but stiffener of table dining 06 persons. |
| 71 | TABLE DINING 6 PERSONS DRG NO: FD- 273 FD/MAP-II/03):Removing of old unserviceable top from Table dining 06 persons and supply and fixing new top made out of 18/19mm thick pre-laminated particle board , teak faced with 4mm thick teak wood beading all-around the top of table dining 06 persons complete all as specified and directed. |
| 72 | Replacement of old unserviceable leg from existing Table dining 06 persons and supply and fixing the same size new leg made out of Ist class hard wood shisham to table dining 06 persons duly french polished complete all as specified and directed. |
| 73 | All as per Srl item No. 15.01 above but long rail. |
| 74 | All as per Srl item No. 15.01 above but short rail. |
| 75 | All as per Srl item No. 15.01 above but stiffener of table dining 06 persons. |
| 76 | TABLE DINING 8 PERSONS DRG NO: FD-239/373Removing of old unserviceable top from Table dining 08 persons and supply and fixing new top made out of 18/19mm thick pre-laminated particle board , teak faced with 4mm thick teak wood beading all-around the top of table dining 08 persons complete all as specified and directed. |
| 77 | Replacement of old unserviceable leg from existing Table dining 08 persons and supply and fixing the same size new leg made out of Ist class hard wood shisham to table dining 08 persons duly french polished all as shown on drawing, complete all as specified and directed. |
| 78 | All as per Srl item No. 16.01 above but long rail. |
| 79 | All as per Srl item No. 16.01 above but short rail. |
| 80 | All as per Srl item No. 16.01 above but stiffener of table dining 08 persons. |
| 81 | TABLE DRG NO: FD- 224Removing of old unserviceable top from Table (900x600x760mm) and supply and fixing new top made out of 18/19mm thick pre-laminated particle board , teak faced with 4mm thick teak wood beading all-around the top of table(900x600x760mm) complete all as specified and directed. |
| 82 | Replacement of old unserviceable leg from existing Table (900x600x760mm) and supply and fixing the same size new leg made out of Ist class hard wood shisham to table (900x600x760mm) duly french polished complete all as specified and directed. |
| 83 | All as per Srl item No. 17.01 above but long rail. |
| 84 | All as per Srl item No. 17.01 above but short rail. |
| 85 | All as per Srl item No. 17.01 above but stiffener of Table (900x600x760mm). |
| 86 | SOFA SET 05 SEATER WITH CUSHION DRG NO: FD/MAP-II/02 & TPRemoving of old unserviceable arm rest from existing Sofa set 5 seater (3+1+1)and supplying and fixing new 1st class hard wood shisham arm rest to sofa set 05 seater complete all as specified and directed. |
| 87 | All as per Srl item No. 18.00 above but front rail of sofa set 05 seater. |
| 88 | All as per Srl item No. 18.00 above but side rail of sofa set 05 seater. |
| 89 | All as per Srl item No. 18.00 above but legs of sofa set 05 seater. |
| 90 | All as per Srl item No. 18.00 above but wooden battens of sofa set 05 seater. |
| 91 | Foam cushion of size 20\\" x 21\\" & 100 mm thick 32 density duly covered with tapestry cloth of approved quality and colour complete all as directed. Make :- Feather Foam or equivalent as approved. |
| 92 | Removal of old unserviceable tapestry cloth from existing seat/ back of sofa set 05 seater and providing new tapestry cloth of DCM/ Handloom long cloth of approved shade Indian make of rate ranging between Rs. 120/- to Rs. 140/- per square meter and fixing the same complete all as specified and directed. |
| 93 | CHAIR DINING WITH CUSHION DRG NO: FD-TPReplacement of old unserviceable U foam from chair dining with cushion with new U foam 50 mm thick of size 16 x 16 inch for seat covered with leatherite of rate ranging between 120/- to 140/- per meter complete all as specified and directed. |
| 94 | Repalcement of old unserviceable U foam from chair dining with cushion with new U foam 25 mm thick of size 10 x 18 inch for back covered with leatherite of rate ranging between 120/- to 140/- per meter complete all as specified and directed. |
| 95 | Removing old unserviceable front leg from existing chair dining with cushion and providing, fixing inn position, new front leg Ist Class hard board Shisham complete all as specified and directed. |
| 96 | All as per Srl item No.19.02 above but for rear leg. |
| 97 | All as per Srl item No.19.02 above but for front/back/side rail of chair dining cushioned. (Each rail shall be measured and paid separaterly). |
| 98 | All as per Srl item No.19.02 above but for stiffner of chair dining cushioned. |
| 99 | TABLE 3'X 2' W/O DRAWER WOODEN DRG NO: FD-284Removing of old unserviceable top from Table 3' X 2' w/o drawer wooden and supply and fixing new top made out of 18/19mm thick pre-laminated particle board , teak faced with 4mm thick teak wood beading all-around the top of Table 3' X 2' w/o drawer wooden complete all as specified and directed. |
| 100 | Replacement of old unserviceable leg from existing Table 3' X 2' w/o drawer wooden and supply and fixing the same size new leg made out of Ist class hard wood shisham toTable 3' X 2' w/o drawer wooden duly french polished complete all as specified and directed. |
| 101 | All as per Srl item No. 20.01 above but long rail. |
| 102 | All as per Srl item No. 20.01 above but short rail. |
| 103 | All as per Srl item No. 20.01 above but stiffener |
| 104 | TABLE 3'X 2' WITH DRAWER WOODEN DRG NO: FD-283Removing of old unserviceable top from Table 3' x 2' with drawer and supply and fixing new top made out of 18/19mm thick pre-laminated particle board , teak faced with 4mm thick teak wood beading all-around the top of Table 3' x 2' with drawer complete all as specified and directed. |
| 105 | Replacement of old unserviceable leg from existing Table 3' x 2' with drawer and supply and fixing the same size new leg made out of Ist class hard wood shisham toTable 3' x 2' with drawer duly french polished, complete all as specified and directed. |
| 106 | All as per Srl item No. 21.01 above but long rail. |
| 107 | All as per Srl item No.21.01 above but short rail. |
| 108 | All as per Srl item No. 21.01 above but stiffener |
| 109 | Conversion of Charpoy GI Pipe with Nylon Newar to Charpoy GI pipe with Ply wood top DRG NO: FD-220M&L for removing the existing nylon newar from charpoy GI pipe and welding four mild steel square tubes 25mmx 25 mm x 16 gauge, 225 mm long on short rails at four corner of Charpoy GI pipe incl drilling holes for fixing plywood with suitable size of counter sunk bolts and nuts and painting steel surfaces of square tubes with two coats of black synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 110 | M&L for 2 Nos mild steel square tube 25mm x 25 mm x 16 gauge,850 mm long welded on long rails horizontally at equal distance incl drilling 04 Nos holes at equal distance forfixing plywood with counter sunk bolts and nuts and painting steel surfaces of square tubes with two coats of black synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 111 | S&F 1950 mm x 900 mm x 12mm thick BWR grade, type-BB,commercial plywood,7 ply approved make Kitply/ Archidply/ Greenply/ Century Ply and fixing ply wood with suitable size of counter sunk bolts, nuts with washer, complete all as specified and directed. |
| 112 | Provision of new clamps for made out of 25 mm x 3 mm mild steel flat iron welded with GI legs of charpoy GI Pipe duly painted with black paint complete all as specified and directed. |
| 113 | REPAIR OF CHARPOY GI 32MM WITH NYLON NEWAR AND PLYWOOD TOP DRG NO: FD-220M&L for removing the threadless/broken long rails from charpoy GI Pipe 32 mm and supply and fix new long rails of 32 mm dia GI Pipe medium grade 1.88 mtr long threaded at both ends and fix to existing three way elbow 32 mm dia, complete all as specified and directed. |
| 114 | Taking out existing old broken short rail from Charpoy GI 32mm dia and providing in position short rails made out of old broken long rail obtained from taking down above item including threading on both ends complete fixing all as specified and shown on drg, complete all as specified and directed. |
| 115 | Taking out existing old broken short rail from Charpoy GI pipe and S&F new short rails made out of 32mm dia GI Pipe medium grade 900mm duly threaded at both ends and fixed to existing three way elbow, complete all as specified and directed. |
| 116 | Taking out existing old broken legs from Charpoy GI 32mm dia and providing in new legs in position made out of old broken short rails obtained from taking down above item and S&F 3mm thick 40mm dia MS plate welded at bottom of leg including threading on top portion and fixed, complete all as specified and directed. |
| 117 | M&L for removing unserviceable three way elbow 32 mm dia and S & F new three way elbow 32 mm dia medium grade (ISI marked), complete all as specified and directed. |
| 118 | M&L for removing unserviceable check nuts of 32 mm dia and S & F new check nuts 32mm dia 6mm thick of best quality, complete all as specified and directed. |
| 119 | M&L for removing the old unserviceable Nylon Newar from charpoy GI Pipe 32 mm dia and Supply reweaving with light shade new nylon newar 50 to 55mm wide closely double knitted, complete all as specified and directed. |
| 120 | M&L for removing the old unserviceable 1950 mm x 900 mm x 12mm thick BWR grade, type BB,commercial plywood,7 ply approved make Kitply/ Archidply/ Greenply/ Century Ply and fixing ply wood with suitable size of counter sunk bolts,nuts with washer, complete all as specified and directed. |
| 121 | HAT STAND WITH MIRROR DRG NO: FD-233M & L for carrying out repair/replacement of following parts of Hat Stand with mirorr as per drawing after dismantling the old parts complete all as specified and directed. |
| 122 | S&F mirror shall be 55mm thick standard quality ATUL/Sanit Gobain duly electro copper plated on back shall be provided on the Black board. |
| 123 | S&F brass cap stand hooks to be provided. |
| 124 | CHAIR DINNING WITH CUSHION DRG NO: FD/MAP-II/04Dismantling / taking out carefully existing broken parts of table dining and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed fro following:- |
| 125 | Teak wood Rear leg |
| 126 | Teak wood Front leg |
| 127 | Teak wood Rail (Front/ Side/ Rear) |
| 128 | Teak wood Stiffener (Side/ Center) |
| 129 | PVC Rubber Shoes of best quality |
| 130 | Seat ply made of 12 mm ply wood commercial BWR type. |
| 131 | Seat Cushion made of 75 mm thick, 40 density complete all specified, directed and all as shown on drawing. Make of Cushion: Sleepwell / Kurlon / Duro Foam |
| 132 | Seat tapestry cloth of worth not less than Rs.300/- per meter of quality and shade of sample approved by GE incluing back side markeen cloth complete all as specified and directed. |
| 133 | Removing old stains by sand papering from wooden furniture items and preparing the surface applying new seina/burnt seina uniformally for French Polish to obtain the required glossy finish on wooden surface (inner and outer surfaces exposed to view) complete wooden furniture items with approved quality of French polish complete all as specified and directed for following :- |
| 134 | Table Dining 4 Person Drg No:FD/MAP-II/03 |
| 135 | Table Dining 6 Person Drg No: FD-273 |
| 136 | Table Dining 8 Person Drg No: FD-376 |
| 137 | Table peg Drg No: FD- 384 |
| 138 | Table Centre Drg No: FD-274 |
| 139 | Table (900mm x 600mm x 760mm) with drawer Drg No: FD-283 |
| 140 | Table 3' x 2' w/o drawer wooden Drg No: FD-284 |
| 141 | Table Dressing mirror ladies/ Gents Drg No: FD-251 (FD/MAP-II/07) |
| 142 | Table Writing Drg No: FD - 275 |
| 143 | Table bed side Drg No: FD - 276 |
| 144 | Chair Easy Drg No: FD - 229 |
| 145 | Chair Dining Drg No: FD - 279 |
| 146 | Chair Writing Drg No: FD - 280 |
| 147 | Chair Dining Pvc Seat MAP Drg No: FD/MAP-II/05 |
| 148 | Side Board Drg No: FD-241 |
| 149 | Stool Dressing Drg No: FD-27(M) |
| 150 | Sofa Set 5 seater with cushion Drg No: FD-281, FD/MAP-II/02 |
| 151 | Bed Ply Top Drg No: FD-246 & 247 |
| 152 | Book case Drg No: FD-237 |
| 153 | Hat Stand with Mirror Drg No: FD - 362 |
| 154 | Teapoy Wooden Drg No: FD - 278 |
| 155 | Locker wooden Drg No: FD-54(M) |
| 156 | Chair dining cushion Drg No: FD/E6/MAP/10 |
| 157 | Bin linen multipurpose with ironing board Drg No: FD/E6/MAP/09 |
| 158 | ALMIRAH LARGE STEEL WITH SHELVES,ALMIRAH LARGE STEEL 1/2HX1/2S & ALMIRAH LARGE STEEL 1/2X1/2S(FD/E6/MAP/18) DRG NO: FD- 1031, FD-114/1033, FD/E6/MAP/18Removing of old unserviceable handles from Almirah large steel and supply and fixing new chromium plated steel handle of exisiting size to Almirah large steel all as shown on drawing and complete all as specified directed. |
| 159 | Removing of old unserviceable locks from Almirah large steel and supply and fixing new lock 4 levers with original and duplicate key to Almirah large steel all as shown on drawing and as directed by Engineer-in-Charge. |
| 160 | Removing of old unserviceable handle & lock assembly from Almirah large steel and supply and fixing new handle & lock assembly to Almirah large steel including making adjustment of door shutter and applying one coat of synthetic enamel olive green paint with spray painting over a coat of primer after preparation of surfaces complete all as shown on drawing and as directed. |
| 161 | Removing of old unserviceable foot rest from Almirah large steel and supply and fixing new foot rest made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points and applying one coat of synthetic enamel olive green paint with spray painting over a coat of primer after preparation of surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 162 | Opening up and removal of old unserviceable shelf from existing Almirah large steel and supplying and fixing new shelf to Almirah large steel all as per drg. |
| 163 | ALMIRAH MEDIUM STEEL & ALMIRAH MEDIUM STEEL 1/2HX1/2S DRG NO: FD-67/114 FD-114(M) /1033Removing of old unserviceable handles from Almirah medium steel and supply and fixing new chromium plated steel handle of exisiting size to Almirah medium steel all as shown on drawing and complete all as specified and directed. |
| 164 | Removing of old unserviceable lock from Almirah medium steel and supply and fixing new lock 4 lever with original and duplicate key to Almirah medium steel complete all as specified and directed. |
| 165 | Removing of old unserviceable handle & lock assembly from Almirah medium steel and supply and fixing new handle & lock assembly to Almirah medium steel including making adjustment of door shutter and applying one coat of synthetic enamel olive green paint with spray painting over a coat of primer after preparation of surfaces complete all as specified and directed. |
| 166 | Removing of old unserviceable foot rest from Almirah medium steel and supply and fixing new foot rest made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points and applying one coat of synthetic enamel olive green paint with spray painting over a coat of primer after preparation of surfaces complete all as specified and directed. |
| 167 | Opening up and removal of old unserviceable shelf from existing Almirah medium steel and supplying and fixing new shelf to Almirah medium steel complete all as specified and directed. |
| 168 | LOCKER BED SIDE STEEL DRG NO: FD-257/1029Replacement of old unserviceable hasp and staple with new 100mm long MS chromium plated hasp and staple all as shown drg and complete all as specified and directed. |
| 169 | Replacement of old unserviceable bow handle with new 100mm long MS chromium plated bow handle all as shown on drg and complete all as specified and directed. |
| 170 | Removing of old unserviceable foot rest from locker bed side and supply and fixing new foot rest made out of 1mm thick MS black sheet (PBI) of existing size, shape and welding at appropriate points and applying one coat of synthetic enamel olive green paint with spray machine over a coat of primer after preparation of surfaces complete all as specified and directed. |
| 171 | BOOK CASE GLAZED STEEL DRG NO: FD-90(M)Removing of old unserviceable lock set of four from book case steel and supply and fixing new lock set with original and duplicate key complete all as specified and directed. |
| 172 | Removing of old unserviceable glass from book case glazed steel and supply & fixing new 5 mm thick glass all as shown on drawing. |
| 173 | S & F in replacement 100mm long chromium plated MS handle to Book case glazed steel all as shown on drg. |
| 174 | REPAIR TO CHAIR CB STEEL WITH ARMS DRG NO: FD-75(m)M&L for removing unserviceable seat from chair CB steel with arms and S&F new seat made out of 2nd class hard wood and canned with 2mm wide and 0.3mm thick plastic cane white colour and 4mm wide 0.4mm thick plastic cane for all round the border including black polishing to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16\\"X3\\" long with two washers on either side of the seat complete all as specified and directed. |
| 175 | M&L for removing unserviceable back from chair CB steel with arms and S&F new back made out of 2nd class hard wood and canned with 2mm wide and 0.3mm thick plastic cane white colour and 4mm wide 0.4mm thick plastic cane for all round the border including black polishing to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16\\"X3\\" long with two washers on either side of the seat, and complete all as specified and directed. |
| 176 | M&L for removing unserviceable/broken arms from chair CB steel with arms and S & F new arms made out of first class teak wood and handle shall be black polished and fixed to the chairs CB steel with arms with suitable wooden screws complete all as specified and directed. |
| 177 | M&L for preparation of steel surfaces by emery paper to Chair CB steel with arms and applying one coat of synthetic enamel paint olive green shade approved quality over a coat of red oxide primer and all as shown on Drg complete all as specified and directed. |
| 178 | CHAIR VERANDAH DRG NO: FD-359 & 256Cutting and removing of old cane/newar from Chair verandah and applying one coat of synthetic enamel white paint after preparation of surfaces and re-canning in Godrej pattern with cane plastic 4 mm wide complete all as shown on drawing, complete all as specified and directed. |
| 179 | Welding to broken joints of Chair varandah all as directed. |
| 180 | S&F in replacement PVC shoes to Chair Verandah all as shown on drg. |
| 181 | CHAIR REVOLVING EXECUTIVE /TILTING DRG NO: TPReplacement of old unserviceable seat of chair with new seat of 12mm thick plywood commercial quality (ISI marked) covered with 75mm thick U foam and leatherite. The back shall be 6mm thick plywood commercial quality (ISI marked) fixed to conduit pipe with screw and covered wiht 40mm thick U foam over shape and leatherite including greasing of bearing and rod for adjustment of height and provn of new wheel four Nos complete all as specified and directed.Note:- The leatherite of rate ranging between Rs. 100/- to Rs. 120/- per meter as per sample approved by GE. |
| 182 | Replacement of old ,unserviceable/broken wheel base of Chair Executive and caster wheels of existing size and shape in best quality, complete all as specified and directed. |
| 183 | Replacement of old unserviceable/broken arms rest with new arm rest of black integral skin polyurethane reinforced with MS insert and shall be scratch and weather resistant of chair executive high back all as directed. |
| 184 | Replacement of unserviceable hydraulic system of chair executive high back for the adjustment of height all as directed by Engineer-in-Charge. |
| 185 | CHAIR WRITING (MAP) DRG NO: FD/E6/MAP/12Removing old unserviceable worn out cushions from seat and back of chair wrinting (MAP) and supply & fixing new PU cushions of 50mm thick of 40 density of existing size and shape, complete all as shown on drawing, specified and complete all as specified and directed. Make of Cushion: Sleepwell/ Kurlon/ Duro Foam |
| 186 | Removing old unserviceable worn out leathrite cover/tapestry cover from seat and back of chair wrinting (MAP) and supply & fixingleathrite cover of approved colour of existing shape and quality including PVC lipping all around, complete all as shown on drawing, specified and directed. |
| 187 | Removing old unserviceable broken frame of the chair writing/Visitor and Supply & fixing new the frame of the chair shall be of MS tubular frame powder coated, cantilever type of size 25mmx10mm in section with 8 x 3mm MS Flat Iron of existing size and quality, complete all as shown on drawing, specified and directed. |
| 188 | Removing old unserviceable worn out old seat & back ply from chair wrinting/Visitor (MAP) and supply & fixing new seat made of 12 mm thick hot press plywood in proper size and shape complete all as shown on drawing, specified and directed. |
| 189 | Removing old unserviceable worn out old arms rest from chair wrinting (Map) /Visitor and supply & fixing new arm rest in one piece made of black integral skin polyurethane in proper size and shape complete all as shown on drawing, specified and as directed. |
| 190 | Removing old unserviceable worn out old rubber stoper (shoe) from chair wrinting (Map)/Visitor and supply & fixing new PVC stopper in white colour in superior quality in proper size and shape complete all as shown on drawing, specified and directed. |
| 191 | M & L for spot welding of broken joint 25mm to 75mm long and and applying a coat of synthetic enamel paint over a coat of red oxide primer after preparation of welded suface complete all as specified and shown on drawing. |
| 192 | Steel portion of chair shall be painted with a coats of synthetic enamel paint of black colour over a coat of primer whereever required complete all as specified and directed. |
| 193 | CHAIR COMPUTER & CHAIR REVOLVING DRG NO: FD/E6/MAP/01 TP/ GodrejRemoving old unserviceable worn out tapestry cloth from seat and back of chair Computer pattern and supply & fixing new tapestry cloth (cost of tapestry cloth shall not be less than Rs 300/- per meter) of existing shape and quality including whereever required PVC lipping all around, complete all as specified and directed. |
| 194 | Removing old unserviceable worn out cushions from seat and back of chair computer of and supply & fixing new PU cushions of 75 mm thick of 40 density of existing size and shape, complete all as specified and directed. Make of Cushion: Sleepwell / Kurlon / Duro |
| 195 | Removing old unserviceable worn out ply from seat and back of each chair computer of trade pattern and supply & fixing new ply 12mm thick hot press plywood of existing size and shape, complete all as specified and directed. |
| 196 | Removing old unserviceable broken tilting bolts from chair computer and Supply & fixing new tilting bolts of existing size and shape in best quality, complete all as specified and directed. |
| 197 | Removing old unserviceable handle from chair computer and supply & fixing new handle including required nut and bolts of existing size and shape in best quality, complete all as specified and directed. |
| 198 | Removing old unserviceable hydraulic fom chair computer and supply & fixing new hydraulic of existing shape and size, complete all as specified and directed. Make (Godrej / Geeken) |
| 199 | Removing old unserviceable / broken base of chair computer and supply & fixing new base including complete assembly and caster wheels of existing size and shape in best quality, complete all as directed by Engineer-in-Charge. |
| 200 | COMPUTER CHAIR REVOLVING WITHOUT ARMS (STEEL) DRG NO: TPRepalcement of old unserviceable seat and back of chair with new seat of 12mm thick plywood commercial quality (ISI marked) covered with 75mm thick U foam and best quality of tapestry cloth. The back shall be 6mm thick plywood commercial quality (ISI marked) fixed to conduit pipe wiht screw and covered wih 40mm thick U foam over shape and best quality of tapestry cloth. Seat and back fixed on frame wiht screw and including all minor repairs and welding etc. complete all as specified and directed. Note :- The tapestry cloth of rate ranging between Rs.80/- to Rs. 100/- per meter as per sample approved by GE. |
| 201 | Replacement of old ,unserviceable/broken wheel base of Chair Executive all as directed by the Engineer-in-Charge. |
| 202 | Replacement of unserviceable hydraulic system of chair executive high back for the adjustment of height all as directed by Engineer-in-Charge. |
| 203 | Removing old unserviceable broken caster wheels from chair computer and supply & fixing new caster wheels of existing size and shape, complete all as specified and directed. |
| 204 | CHAIR REVOLVING EXECUTIVE HIGH BACK DRG NO: TPReplacement of old unserviceable seat and back of chair with new seat of 12mm thick plywood commercial quality (ISI marked) covered with 75mm thick U foam and best quality of tapestry cloth. The back shall be 6mm thick plywood commercial quality (ISI marked) fixed to conduit pipe wiht screw and covered with 40mm thick U foam over shape and leatherite including greasing of bearing and rod for adjustment of height and provn of new wheel four Nos complete. Fixing all as per drawing and including all minor reparis and wedling etc. complete all as specified and directed. Note:- The leatherite of rate ranging between Rs. 100/- to Rs. 120/- per meter as per sample approved by GE. |
| 205 | Replacement of old unservicable/ borken arm rest with new arm rest of black integral skin polyurethana reinforced with MS insert and shall be scratch and wether resistant of chair briefing static base all as directed |
| 206 | Replacement of unserviceable hydraulic system of chair executive high back for the adjustment of height all as directed by Engineer-in-Charge. |
| 207 | Replacement of old unserviceable/broken wheel base of Chair Executive all as directed by the Engineer-in-Charge. |
| 208 | Removing old unserviceable broken caster wheels from chair computer and supply & fixing new caster wheels of existing size and shape, complete all as specified and directed. |
| 209 | TABLE OFFICE OFFICER STEEL DRG NO: FD-1003Removing of old unserviceable top from Table Office Officers steel and supply and fixing the new top of same size made out of 18/19mm thick pre-laminated particle board teak faced having 4mm thick teak wood beading all-around the table top all as shown on drawing and complete all as specified and directed. |
| 210 | Removing of old unserviceable lock from Table Office Officers steel and supply and fixing new lock with two keys all as shown on drawing and as directed. |
| 211 | Removing of old unserviceable drawer from Table Office Officers steel and supply and fixing the new drawer of same size and shape made out of 1mm thick MS black sheet all as shown on drawing and applying one coat of synthetic enamel olive green paint with spray painting (Internally and externally) over a coat of primer after preparation of surfaces complete all as specified and directed. |
| 212 | S & F in replacement 100mm long piece of 25 Sq mm MS tube having wall thickness of 1.6mm including welding to Table Office Officers complete all as directed by Engineer -in-Charge. |
| 213 | Removing of old unserviceable side of cup board of Table Office Officers steel and supply and fixing the dnew side made out of 1mm thick MS black sheet all as shown in drawing and applying one coat of synthetic enamel paint olive green shade with spray painting over a coat of primer after preparation of surfaces complete all as specified and as directed. |
| 214 | S&F in replacement PVC shoes to Table Office Officers steel complete all as shown on drg and as directed. |
| 215 | TABLE (900mmx900mmx760mm) STEEL DRG NO: FD-1009Removing of old unserviceable top from Table (900x900x760mm) steel and supply and fixing the new top of same size made out of 18/19mm thick pre-laminated particle board teak faced with 4mm thick teak wood beading all-around the table top all as shown on drawing and complete all as specified and directed. |
| 216 | Welding to broken joints of Table(900x900x760mm) steel all as directed . |
| 217 | S&F in replacement PVC shoes to Table (900x900x760mm) steel complete all as shown on drg and as directed. |
| 218 | TABLE 3'x 2' STEEL WITHOUT DRAWER DRG NO: FD-1007Removing of old unserviceable top from Table 3'X2' steel without drawer and supply and fixing the new top of same size made out of 18/19mm thick pre-laminated particle board teak faced with 4mm thick teak wood beading all-around the table top all as shown on drawing and complete all as specified and directed. |
| 219 | Welding to broken joints of Table 3'X2' steel without drawer all as directed . |
| 220 | S&F in replacement PVC shoes to Table 3'X2' steel without drawer complete all as shown on drg and as directed. |
| 221 | TABLE COMPUTER STEEL DRG NO: FD-TPRemoving of old unserviceable top from Table for computer steel with drawer and supply and fixing the new top of same size made out of 18/19mm thick pre-laminated particle board teak faced with 4mm thick teak wood beading all-around the table top all as shown on drawing and complete all as specified and directed. |
| 222 | Removing of old unserviceable lock from Table computer steel with drawer and supply and fixing new lock with two keys all as shown on drawing and as directed. |
| 223 | Removing of old unserviceable steel sliding channel of key board and supply and fixing new stainless steel sliding channel to Table computer steel as as directed by Engineer-in-Charge. |
| 224 | TABLE OFFICE OFFICER STEEL & TABLE OFFICER L SHAPE DRG NO: FD-84/1003 &HFD-2051Removing of old unserviceable top from Table Office Officers steel and supply and fixing the new top of same size made out of 18/19mm thick pre-laminated particle board teak faced having 4mm thick teak wood beading all-around the table top all as shown on drawing and complete all as specified and directed. |
| 225 | Removing of old unserviceable lock from Table Office Officers steel and supply and fixing new lock with two keys all as shown on drawing and as directed. |
| 226 | Removing of old unserviceable drawer from Table Office Officers steel and supply and fixing the new drawer of same size and shape made out of 1mm thick MS black sheet all as shown on drawing and applying one coat of synthetic enamel olive green paint with spray painting (Internally and externally) over a coat of primer after preparation of surfaces complete all as specified and directed. |
| 227 | S & F in replacement 100mm long piece of 25 Sq mm MS tube having wall thickness of 1.6mm including welding to Table Office Officers complete all as directed by Engineer -in-Charge. |
| 228 | S&F in replacement PVC shoes to Table Office Officers steel complete all as shown on drg and as directed. |
| 229 | TEAPOY VERANDAH STEEL DRG NO: FD-FD/E6/MAP/17Removing of old unserviceable top from Teapoy verandah and supply and fixing the new top of same size made out of 18/19mm thick pre-laminated particle board both side white with 4mm thick teak wood beading all-around the table top all as shown on drawing and complete all as specified and directed. |
| 230 | Welding to broken joints of Teapoy verandah all as directed . |
| 231 | S&F in replacement PVC shoes to Teapoy verandah complete all as shown on drg and as directed. |
| 232 | RECEPTACLE WITH BUCKET (SMALL) DRG NO: FD-134/1045Replacement of GI bucket of receptacle with bucket small and in lieu providing new GI bucket duly alumium painted made out of 1mm thick GI sheet to receptacle with bucket large complete all as shown on drawing and complete all as specified and directed. |
| 233 | Repairing of lever system of receptacle with bucket including necessary welding/nut, bolts complete all as shown on drawing. |
| 234 | Removing of old/unserviceable top cover of recetacle with bucket and provinding new top cover of receptacle made out of 1mm thick circular GI sheet complete all as shown on drawing and directed. |
| 235 | Spray painting internally and externally to all steel surfaces other than galvainzed to receptacle with bucket with aluminium paint of approved quality over a coat of red oxide primer to the entire satisfaction of Engineer-in-Charge. |
| 236 | REPAIR OF DOUBLE BED BUNK STEEL DRG NO: TP/GodrejS&F of 12mm thick plywood BWR grade type BB size of 1950mm x 900mm approved make Kitply/ Archidply/ Greenply/ Century Ply and fixing it by min 16 Nos of 35mm nuts & bolts with washer complete for each bunker bed complete all as specified and directed. |
| 237 | M&L for repair of existing old broken leg of bunker bed with 3mm thick MS sheet welded wherever required complete all as specified and directed. |
| 238 | M&L for repair to existing wire mesh (Jali) of bunker bed of size 1880mm x 914mm, 4mm thichness including welding wherever required at joints upto 10 joints complete all as specified and dirceted. |
| 239 | M&L for removing unservicable/ worn out mild steel square tube and S&F new mild steel square tube 19mm x 19 mm x 16 gauge,915 mm long of approved make welded on long rails horizontally at equal distance incl drilling 02 holes at equal distance for fixing plywood and painting steel surfaces of square tubes with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer wherever required complete all as specified and directed. |
| 240 | CHAIR SCHOOL WITH HAND BOARD DRG NO: FD/E6/MAP/05Removing unserviceable seat and back from school chair and S&F PVC 4mm thick in single piece seat and back weight not less than 1.2 kgs each with adequate nos of steel screw, complete all as specified and directed. |
| 241 | Removing unserviceable hand board from chair school and S&F pre-laminated particle board of exterior grade of approved shade with standard size of PVC edging all around of minimum thickness 1.6mm thick fixed with hot glue complete all as specified and directed. |
| 242 | REPAIRS / PAINTING OF Charpoy IP Hard Top: DRG NO: (FD/MAP-II/01)Reparation of old steel surfaces by scraping with emery paper, cleaning, re-dusting, making the surfaces smooth and apply putty where required and applying one coat of synthetic enamel paint (black paint) of Charpoy IP hard top including welding wherever necessary complete all as specified is to be done at Furniture yard or user locaton(Chail, Kelvin Grove,1 JARif unit area, HQ ARTARC ,111 Inf Bn,MH Shimla) as directed by Engr-in Charge |
| 243 | Removing old unserviceable/ worn out existing plywood top from Charpoy IP hard top and S & F new 12mm thick plywood BWR grade Type BB commercial 7 Ply of size 1930x850mm of approved make (Kitply/ Archidply/ Greenply/ Century Ply) and fixing with minimum 12Nos of 8x30mm screw for each bedcomplete all as specified and directed. |
| 244 | REPAIRS/ PAINTING OF Bed hard (FD/E6/MAP/08) DRG NO: FD/E6/MAP/08Preparation of old steel surfaces by scraping with emery paper, cleaning, re-dusting, making the surfaces smooth and apply putty where required and applying one coat of synthetic enamel paint (black paint) of bed hard hard top including welding wherever necessary complete all as specified and directed. |
| 245 | Removing old unserviceable/ worn out existing plywood top from bed hard top and S & F new 12mm thick plywood BWR grade Type BB commercial 7 Ply of size 1974x930mm of approved make Kitply/Archidply/Greenply/Century Ply) and fixing with minimum 12Nos of 8x30mm screw for each bed complete all as specified and directed. |
| 246 | Removing old Paint completely and preparing the surface for painting (inner and outer surfaces exposed to view ) and applying one coat of synthetic enamel paint White, Black, Gray & olive green shade with spray painting over a coat of primer on the surfaces where necessary after removal of denting and welding wherever required complete all as specified and directed to the Following steel furniture items:- |
| 247 | Side rack steel 3 spaces DRG NO: FD-1023 |
| 248 | Stool steel (305mm x 305mm x 510mm) DRG NO: FD–81(M) |
| 249 | Filing cabnet steel 4 drawers DRG NO: |
| 250 | Rack shoe steel DRG NO: (FD/E6/MAP/02(R)) |
| 251 | Rack adj steel 6 Tier DRG NO:HFD-2032 |
| 252 | Rack adj steel3Tier DRG NO:HFD-2032 |
| 253 | Rack adj 04 steel tier DRG NO:HFD-2032 |
| 254 | Table Office Officer's steel DRG NO:FD-1003 |
| 255 | Locker bed side steel DRG NO:FD-257 |
| 256 | Book shelf open large steel DRG NO:FD-69(M) |
| 257 | Book case Glazed steel DRG NO: FD-1028 |
| 258 | Table (900 x 900 x 760mm) steel DRG NO:FD-1009 |
| 259 | Teapoy Verandah DRG NO:FD-255 |
| 260 | Teapoy varandah DRG NO: FD/E6/MAP/17 |
| 261 | Almirah large steel DRG NO: FD-1031 |
| 262 | Almirah large steel1/2Hx1/2S DRG NO:FD-1034 |
| 263 | Almirah large steel1/2Hx1/2S DRG NO: FD/E6/MAP |
| 264 | Almirah Medium steel DRG NO:FD-1032 |
| 265 | Almirah Medium steel 1/2Hx1/2S DRG NO:FD/E6/MAP |
| 266 | Trestle store room steel DRG NO:FD-1043 |
| 267 | Table Computer steel (4'x2'x2'-6\\") DRG NO:FD-TP |
| 268 | Table 3'x2' steel with drawer DRG NO:FD-1008 |
| 269 | Table 3'x2' steel without drawer DRG NO:FD-1007 |
| 270 | Table Office clk steel 1500x750x750mm DRG NO:HFD-2053 |
| 271 | Double Bed Bunk Steel DRG NO:FD TP |
| 272 | Chair CBA DRG NO: HFD-2041 |
| 273 | Chair CB DRG NO:HFD-2040 |
| 274 | Storage Rack Steel DRG NO:FD-1023 |
| 275 | Table Tubler Steel DRG NO:FD-142 |
| 276 | REPAIRS / PAINTING OF STEEL ALMIRAH: M&L for preparation of old steel surfaces by scraping with emery paper, cleaning, redusting, making the surfaces smooth and apply putty whereever required and one coat of synthetic enamel paint of olive green shade of approved make & quality inside and out side of almirah large steel with shelves / Almirah large steel 1/2H x 1/2S and all as specified and directed. (Drg. No. - FD-351/ 1031/243) |
| 277 | All as per Srl Item No 50.00 above but Almirah medium steel with shelves/Almirah med steel 1/2H x 1/2S (Drg. No. - FD-67/114 /1032) |
| 278 | All as per Srl Item No 50.00 above but locker bedside steel (Drg. No. - FD-257) |
| 279 | M&L for Removing old unserviceable locks from Almirah large/Almirah medium steel/ Almirah large steel 1/2 HX1/2 S , Almirah medium steel 1/2H x 1/2S and S & F new 6 lever lock with duplicate key (2 Nos of key) of approved quality of existing size fixed with screw/ welding to shutter of almirah complete all as specified and directed. (Drg. No. - FD-1031/ FD-1032/FD-67/ FD-114/ FD-1033) |
| 280 | M&L for Removing old unserviceable lock Assembly with 6mm thick bars round from Almirah large steel/Almirah medium steel /Almirah large steel 1/2HX1/2S /Almirah medium steel 1/2H x 1/2Sh and supply and fix new lock assembly including 6mm thick bars round and lock plate with necessary fittings of approved quality complete all as specified and directed. (Drg. No. - FD-1031/FD-1032/FD-67/ FD-114/FD-1033) |
| 281 | M&L for Removing old unserviceable broken handles from Almirah large steel /Almirah medium steel /Almirah large steel 1/2HX1/2S / Almirah medium steel 1/2HX 1/2S and supply and fix new Godrej pattern handle with necessary fittings of approved quality complete all as specified and directed. (Drg. No. - FD-1031/FD-1032/FD-67/FD-114/FD-1033) |
| 282 | Removing the unserviceable shelves from Almirah large steel/Almirah medium steel /Almirah large steel 1/2HX1/2S/ Almirah medium steel 1/2HX 1/2S and supply and fix new shelves made of 1mm thick CRCA sheet made to shape and size on drawing and fixing with cleats, nuts and bolts incl two coats of synthetic enamel paint (Olive Green) over one coat of red oxide zinc chrome primer complete all as specified and directed. (Drg No. FD-1031/FD-1032/FD-67/ FD-114/FD-1033) |
| 283 | Removing the existing unserviceable foot rest from Almirah steel large /Almirah medium steel /Almirah large steel 1/2Hx1/2S /Almirah medium steel 1/2HX 1/2S and supply and fixing the new foot rest made out of 1mm thick CRCA sheet and fixed with welding/riveting as per existing size and duly painted with two coats of synthetic enamel paint (Olive Green) over one coat of red oxide zinc chrome primer complete all as specified and directed. (Drg No. FD-1031/FD-1032/FD-67/FD-114/FD-1033) |
| 284 | SOFA SET CUSHION: Foam cushion with cover duly stiched one side zip of size 530 to 560mm as per sample approved by engineer in charge. Note : Cost of the tapestry cloth shall not be less than Rs. 300/- per meter complete all as specified is to be done as directed by Engr-in Charge (Drg No. FD/E6/MAP/12 & TP |
| 285 | REPAIRS/RECANING OF WOODEN CHAIRS: M&L for removing unserviceable plastic cane and providing new plastic cane 2 to 2.5mm wide for weaving and 4mm wide plastic cane of 0.60mm thick for border work suitable for following description( weaving shall be Godrej pattern) and including Hard Rubber ring duly screwed in each leg of chairs complete all as specified and directed. |
| 286 | Chair Writing (Seat) (Drg. No. - FD-261/ 280) |
| 287 | Chair Easy (Seat & Back) (Drg. No. - FD-229) |
| 288 | Chair dining (Seat) (Drg. No. - FD-279/ 262) |
| 289 | Removing old unserviceable plastic seat and supplying and fixing new plastic seat of Chair Dining (Seat) (Drg. No. - FD/Map-II/05) |
| 290 | M&L for removing unserviceable broken rear legs and supply and fix new rear legs made out of 1st class hard wood teak suitable for existing chairs of following description complete all as specified and directed. |
| 291 | Chair Writing (Drg. No. - FD-261/ 280) |
| 292 | Chair Easy (Drg. No. - FD-229) |
| 293 | Chair Dining (Drg. No. - FD-279/262) |
| 294 | M&L for removing unserviceable broken front legs and supply and fix new front leg made out of 1st class hard wood teak suitable for existing chairs of following description complete all as specified and directed. |
| 295 | Chair Writing (Drg. No. - FD-261/ 280) |
| 296 | Chair Easy (Drg. No. - FD-229) |
| 297 | Chair Dining (Drg. No. - FD-279/262) |
| 298 | M&L for removing unserviceable broken side/front/back wooden member of chairs and supply and fix new side/front/back wooden member made out of 1st class hard wood teak and provided 3mm dia holes at a spacing of 10mm to 12.5mm centre to centre along the length of member for the purpose of canning suitable for existing chairs of following description all as specified and directed. |
| 299 | Chair Writing (Drg. No. - FD-261/ 280) |
| 300 | Chair Easy (Drg. No. - FD-229) |
| 301 | Chair dining (Drg. No. - FD-279/262) |
| 302 | M&L for removing unserviceable broken arms rest left or right of chair and supply and fix new arms rest left or right made out of 1st class hard wood teak shape and size suitable for existing chairs of following description all as directed. |
| 303 | Chair Writing (Drg. No. - FD-261/ 280) |
| 304 | Chair Easy (Drg. No. - FD-229) |
| 305 | M&L for removing unserviceable broken bottom stiffiner centre / side from the following chairs and supply and fix new bottom stiffiner centre or side made out of 1st class hard wood teak wood all as shown in drg and as specified and directed . |
| 306 | Chair Writing (Drg. No. - FD-261/ 280) |
| 307 | Chair Dining (Drg. No. - FD-279) |
| 308 | Repair of Chair Varandah (Drg. No. - FD-256/259/359):M & L for removing broken/ unserviceable cane both seat & back from Chair Varandah and Recanning the same with best quality plastic cane 4mm wide and 0.60 mm thick of approved make after cleaning throughly all the surfaces of chair including required welding work for broken frame whereever required and redusting and applying one coat of synthetic Enamel paint over a coat of red oxide primer of approved shade and providing suitable hard rubber shoes 4 Nos approved quality for each chair and all as specified and as directed. |
| 309 | REPAIR OF WOODEN TABLES:M & L for removing unserviceable/ broken table top and S & F new table top made out of 18mm thick prelaminated particle board exterior Grade ( Natural teak finish) and provided 4mm thick teak wood beading all around the top suitable for following description all as specified and directed. |
| 310 | Table 3' x 2' (900x600x760mm) with drawer/ without drawer (Drg. No. - FD-224/283) |
| 311 | Table Dining 6 persons (Drg. No. - FD-273/276) |
| 312 | Table Centre (Drg. No. - FD-235/274/ 375) |
| 313 | Teapoy (Drg. No. - FD-237/ 387/278) |
| 314 | Table peg (Drg. No. - FD-277/ 384/236) |
| 315 | Table writing/ Table writing medium (Drg. No. - FD-275) |
| 316 | Table Dining 120x90cm (4 persons) (Drg. No. - FD/Map-II/03) |
| 317 | POLISHING OF WOODEN FURNITURE:-M & L For preparation of surfaces of old wooden polished surfaces with sand/ emery paper, well dusted/cleaned and applying French polish of approved quality to achieve uniform smooth texture and high glossy finish after filling holes with suitable putty all as specified and directed for the following items :- |
| 318 | Peg table (Drg. No. - FD-25/ 277/384) |
| 319 | Teapoy (Drg. No. - FD-237/278 /387) |
| 320 | Table Dining 120cm x 90cm (Drg. No. - FD/Map-II/03) |
| 321 | REPAIR OF SCHOOL CHAIR WITH HAND BOARD (Drg. No. - FD/E6/MAP/05) (Drg. No. - FD/Map-II/05): Removing unserviceable seat and back from school chair and S&F PVC 4mm thick single piece seat and back weight not less than 1.2kg each with adequate nos of steel screw, complete all as specified and shown on drawing. Make:-Asisarchildam Kitlam/Action Tesa/Green Ply. |
| 322 | Removing unserviceable hard board from chair school and S&F prelaminated particle board of exterior grade of approved shade with standard size of PVC edgeing all around of minimum thickness 1.6mm thick fixed with hot glue complete all as specified and directed. Make : Asisarchidam Kitlam/Action Tesa/ Green Ply |
| 323 | REPAIR OF DRESSING MIRROR GENTS (Drg. No. - FD/MAP-II/16) Drg No (Drg. No. - FD/E6/Map/16): Removing unserviceable /broken mirror from dressing mirror gents and S&F glass 5 to 5.5mm thick well polished , uniformily silver plated with red led paint in the back, free from silvering defects complete all as specified and directed. |
| 324 | Removing unserviceable glass shelves from dressing mirror gents and S&F glass shelves in dressing mirror gents of approx size 580mm longx90mmwidex5mm thick of approved quality complete all as specified and directed |
| 325 | Polishing of dressing mirror gents with french polish for obtaining glossy finish incl preparation of wooden surfaces by scrapping with sand paper &apply putty where ever required complete all as specified and directed. |
| 326 | Repair of Double Bed bunk Steel (Drg. No. - TP): S&F of 12mm thick plywood BWR grade type BB size of 1950mm x 900mm approved make and fixing it by min 16 Nos of 35mm nuts & bolts with washer complete for each bunker bed complete all as specified is to be done as directed by Engr-in Charge and shown on drawing |
| 327 | M&L for repair of existing old broken leg of bunker bed with 3mm thick MS sheet welded wherever required complete all as specified is to be done as directed by Engr-in Charge and shown on drawing. |
| 328 | M&L for removing unservicable/ worn out mild steel square tube and S&F new mild steel square tube 19mm x 19 mm x 16 gauge,915 mm long of approved make welded on long rails horizontally at equal distance incl drilling 02 holes at equal distance for fixing plywood and painting steel surfaces of square tubes with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer wherever required complete all as specified is to be done as directed by Engr-in Charge and shown on drawing |
| 329 | REPAIRS / PAINTING OF Charpoy IP Hard top (Drg No. FD/Map-II/01)Preparation of old steel surfaces by scraping with emery paper, cleaning, re-dusting, making the surfaces smooth and apply putty where required and applying one coat of synthetic enamel paint (black paint) of Charpoy IP hard top including welding wherever necessary complete all as specified is to be done as directed by Engr-in Charge |
| 330 | M&L for repair of existing old broken leg of Charpoy IP with 3mm thick MS sheet welded wherever required complete all as specified is to be done as directed by Engr-in Charge and shown on drawing. |
| 331 | S&F of 12mm thick plywood BWR grade type BB size of 1950mm x 900mm approved make and fixing it by min 16 Nos of 35mm nuts & bolts with washer complete for each Charpoy IP Hard Top complete all as specified is to be done as directed by Engr-in Charge and shown on drawing (Drg No. FD/Map-II/02) |
| 332 | Chair Revolving (Drg. No. - FD-TP) :- S&F in replacement of unservicable of hydraulic system heavy duty of chair revolving for operating computer |
| 333 | S&F in replacement of unservicable of Chromium plated base with wheel of chair revolving for operating computer |
| 334 | S&F in replacement of unservicable of wheels for chair revolving for operating computer |
| 335 | S&F in replacement of unservicable of PVC arm for chair revolving for operating computer |
| 336 | Repair To Table Bed Side (MAP) [FD/E6/MAP/15]Dismantling / taking out carefully existing broken parts of Table bed side Map and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified is to be done at Furniture yard as directed by Engr-in Charge and directed as follows :- |
| 337 | Top of Table Bed side (MAP) made out of 18mm thick prelaminated MDF board, both side teak face laminated exterior grade with 6mm thick teak wood beading alround. |
| 338 | Side made out of 18mm thick prelaminated MDF board, both side teak face laminated exterior grade with 6mm thick teak wood beading alround. |
| 339 | Upper drawer (front side) made out of 18 mm thick prelaminated MDF board, both side teak face laminated exterior grade with 6mm thick teak wood beading alround including D type SS handle. |
| 340 | Complete bottom drawer made out of 18mm thick prelaminated MDF board, both side teak face laminated exterior grade with 6mm thick teak wood beading alround including D type SS handle. |
| 341 | Bottom of drawer made out of 6mm thick commercial BWR plywood including duly primer. |
| 342 | Back made out of 6mm thick commercial ply BWR type, made to shape, duly primer. |
| 343 | S&F in replacement of unservicable Handle 75mm long 'D' Type Stainless steel |
| 344 | REPAIRS / PAINTING OF Bed hard (FD/E6/MAP/08) : Preparation of old steel surfaces by scraping with emery paper, cleaning, re-dusting, making the surfaces smooth and apply putty where required and applying one coat of synthetic enamel paint (black paint) of bed hard hard top including welding wherever necessary complete all as specified is to be done at Furniture yard or user locaton as directed by Engr-in Charge |
| 345 | Removal of old damaged long rail from bed hard and supply and fixing new long rail with MS square pipe (18 guage) of size sa per drawing and fixing the same as shown on drawing including two coat of Black Paint after preparing the surface by sand paper complete all as specified and as directed. |
| 346 | Removing of old damaged head rest from bed hard and supply and fixing new head rest with MS Square pipe (18 Guage) as per drawing and shall be provided board 18mm thick prelaminated MDF board of approved shade fitted with 4mm thick teak wood beading shall be fixed with headless nails and adhesive. fixing the same all as shown on drawing including two coat of enamel paint black. |
| 347 | All as per Srl item No. 75.02 above but foot rest. |
| 348 | Removing old unserviceable/ worn out existing plywood top from bed hard top and S & F new 12mm thick plywood BWR grade Type BB commercial 7 Ply of size 1980 x 930mm of approved make Kitply/Archidply/Greenply/Century Ply) and fixing with minimum 12Nos of 8x30mm screw for each bed complete all as specified and directed. |
| 349 | M&L for removing unservicable/ worn out mild steel square tube and S&F new mild steel square tube 19mm x 19 mm x 16 gauge,915 mm long of approved make welded on long rails horizontally at equal distance incl drilling 02 holes at equal distance for fixing plywood and painting steel surfaces of square tubes with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer wherever required complete all as specified and directed. |
| 350 | S&F in replacement PVC shoes 40mm high having metal washer fitted inside compatible to insert 38x38mm square pipe of bed hard complete all as specified and directed. |
| 351 | Note: The scope of work included is to be carried out at furniture store yard or user locations (RMS Chail, Kelvin Grove, 1st JAK Rif unit area, HQ Artrac, 111 Inf BN, MH Shimla, Sanjauli and Kalka) respectively. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender