Tender For Repair To Certain Roadsincluding Road Furniture Etc Inat Damana Mil Stn Under Ge Jammu
Tender Value
61.50 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
3 days left
EMD
1.17 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Certain Roadsincluding Road Furniture Etc Inat Damana Mil Stn Under Ge Jammu
BOQ
| Sl. No. | Item Description |
| 1 | Repair to Potholes any depth, not exc 1 sq m each including sweeping free from dust and mud , or water, scoring sunken surfaces in roads, paths , etc. cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) but making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bitumenous macadem, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm all as specified and directed |
| 2 | Preparing existing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air blower to remove all loose dirt/foreign materials and applying evenly a priming tack coat with bituminous primer (Paving Bitumen of Viscosity Grade VG-30) at the rate of 5 Kg per 10 Sqm of surface laying bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5 % binder content of viscosity grade VG-30 by weight of total mix and 4% stone dust conforming to specification for filler as per IRC-95, 1987 (filler) prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using 8 to 12 tonne power roller, complete all as specified and as directed.Note:-The minimum consolidated thickness will be 30mm. However it may be increased at places to maintain the camber as per the site requirement and nothing extra shall be admissible on this account. The contractor must visit the site before quoting their rates. |
| 3 | M&L for Premix bituminous macadam with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade VG-30 grade by weight of total mix (Consolidated thickness 75mm or less), laid / rolled and compacted to required gradient and camber using power roller 8 to 12 tonne, complete all as specified and directed. |
| 4 | S&F in repairs Metal Tubular Dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 5 | S&F in repairs Cat Eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 6 | S&F in repairs Solar Road Stud aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed |
| 7 | S&F in repairs Heavy duty Speed Breaker of size 450mm wide x 50 mm high with reflective yellow/black colour, including drilling holes and fixing to existing bituminous road surface with suitable anchor bolsts, nuts, washers and all necessary accessories, complete all as specified and directed. |
| 8 | S&F in repairs Road safety Convex Mirror of 800 mm dia polycarbonate acrylic unbreakbale mirror fixed over and incl 1500mm height above ground level of 75mm dia MS pipe with two coat of synthetic enamel paint over over priming coat, fixed in ground including embedding in PCC 1:2:4 (450x450x600mm) type B1 complete all as specified and directed |
| 9 | S&F in repairs Road directing Sign Board with 2mm thick aluminium sheet degreasing and fine grinding both sides for pasting reflective sheet, board size 900mm x 600mm and fixed on both side with 100mm high letter, 40cm long arrows with high intensity prismatic type reflective material and outer frame made of 50mm dia MS Pipe with two posts at minimum height of 1800mm from ground level and 450mm below ground level with two coat of synthetic enamel paint over over priming coat, including embedding in PCC 1:2:4 (450x450x600mm) type B1 complete all as specified and directed |
| 10 | M&L for preparing bituminous surfaces of road and marking 2.0mm thick centre lines, stop lines, dashes, arrows etc. and the like on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender