Tender For Special Repair Of Bldg No T-43 Of Hq Mb Area C , Shifting Of Chain Link Fencing And Road Side Widening Near Aps No 1 School And Provn Of Reception Cum Waiting Area Near Station Gym Under Ge (P) No. 1 Jabalpur
Tender Value
48.16 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
12 days left
EMD
96500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Bldg No T-43 Of Hq Mb Area C , Shifting Of Chain Link Fencing And Road Side Widening Near Aps No 1 School And Provn Of Reception Cum Waiting Area Near Station Gym Under Ge (P) No. 1 Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in loose/soft soil, complete all as specifies and directed |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out for any type of soil, complete all as specifies and directed |
| 3 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specifies and directed |
| 4 | M&L for Cement concrete type D-2 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete, complete complete all as specifies and directed |
| 5 | M&L for 75 mm cement concrete Type C2 1:3:6 (40 mm graded aggregate) in plinth protection and even and finishing cement concrete surface even and smooth without using extra cement complete all as specifies and directed. |
| 6 | M&L for RCC (Design mix M-25) in foundations, including, rafts, footings, foundation beams, bases for columns, etc , basement slab, under reamed piles and mass concrete complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 7 | M&L for RCC M-25 design mix as in columns , pillars, piers, posts and struts etc. complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 8 | M&L for RCC (Design mix M-25) in beams, cantilevers, bressumers, lintels over 1.50 m span complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 9 | M&L for RCC M-25 design mix (using 20 mm graded stone aggregate.) in chajjas complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 10 | M&L RCC M-25 design mix (using 20 mm graded stone aggregate.) in roof slabs supported on walls etc. complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 11 | Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter complete all as specified and directed. |
| 12 | Use and waste formwork to sides of pillars, posts, struts, piers, columns etc square or rectanguar complete all as specified and directed. |
| 13 | Use and waste formwork to sides and soffits of floor beams, roof beams , beam haunchings girders, lintels, cantilevers etc to plain surface complete all as specified and directed. |
| 14 | Use and waste for form work to soffits of suspended slabs, such as roof slabs and similar work; not exc. 200 mm thick for flat fair finish surfaces complete all as specified and directed. |
| 15 | Use and waste Formwork to chajjas including edges flat fair finished surfaces of concrete complete all as specified and directed. |
| 16 | S&F TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed. |
| 17 | S&F TMT steel bars 5mm dia and over, up to and including 10mm dia in stirrups spcers and binders complete all as specified and directed. |
| 18 | M & L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in, built in cement mortar 1:6, complete all as specifies and directed |
| 19 | M&L for Brickwork with fly ash bricks or brick tiles in brickon- edge walls (half brick thick),built in 1:6 cement mortar, complete all as specifies and directed |
| 20 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of Cement plaster 1:6, rendering is to be finished even or smooth (without using extra lime or cement complete all as specifies and directed |
| 21 | M & L for rendering 5 mm thick in C:M 1:3 on Ceiling/RCC surfaces and finishes and smooth complete all as specified and directed |
| 22 | M&L for new surface of wall and applying two coat of internal oil emulsion over Priming plastered over coat of cemant base putty and other surfaces with alkali resistant priming paint,complete all as specifies and directed |
| 23 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. over coat of putty complete all as specifies and directed |
| 24 | S & F Virified Ceramic tiles shade 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 Sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, with screed bed or bedding layer of cement mortar (1:6) 15 mm thick for laying floor finishes, roofs complete all as specifies and directed |
| 25 | S & F Virified Ceramic tiles shade 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 Sqm but not exceeding 0.42 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, with rendering of cement mortar (1:4) 10 mm thick for laying floor finishes, roofs complete all as specifies and directed. |
| 26 | M & L for 10 mm thick screed bed or bedding layer of mortar in cement mortar (1:4) for laying roof finish as padding finished even and sooth complete all as specifies and directed |
| 27 | M&L for APP polymeric membrane min weighting 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric(wt not less than 150 gms/sqm laid on primed surfaces by torch application on method including bitumen primer @ 0.3 kg/sqm complete all as specifies and directed |
| 28 | M&L for Applying coats of bituminous base aluminium paint on old Surfaces including preparation complete as specified and directed. |
| 29 | M&L for powder coated aluminium frame, shutter and grill for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specifies and directed |
| 30 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specifies and directedNote: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made, complete all specified and directed by Engg. in Charge. |
| 31 | M&L for Providing and fixing factory made single/double extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specifies and directed(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 32 | S&F in repair solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube in opening complete all as specifies and directed |
| 33 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specifies and directed |
| 34 | S&F Factory made wire gauzed panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specifies and directed |
| 35 | M&L for Sheet glass of thicknes 4mm, selected quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane etc complete all as specifies and directed |
| 36 | S&F Toughned glass 12 mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required. Incl. 300 mm 25 33 dia SS handle lock floor spring complete all as specifies and directed |
| 37 | M&L for granite slab one piece 16 mm to 18 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps, platform including rounding off the exposed edges and polishing complete all as specifies and directed |
| 38 | S & F 30 to 35 mm thick cuddapa stone slab one piece as in platform vertical wall complete all as specifies and directed |
| 39 | S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specifies and directed |
| 40 | S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specifies and directed |
| 41 | S & F 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specifies and directed |
| 42 | S & F 100 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specifies and directed |
| 43 | S&F aluminium handles, cast type, anodised 150mm size complete all as specifies and directed |
| 44 | S&F aluminium handles, cast type, anodised 100mm size complete all as specifies and directed |
| 45 | S&F for floor door stopper of SS body and tongue, overall length of cover plate 150 mm, anodised with hard drawn steel spring, fixed to shutter complete all as specified and directed. |
| 46 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of bedding layer of thickness 15 mm, complete all as specifies and directed |
| 47 | M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over CM 1:4, over and including 10mm thick on fair faces of brick work or concrete surfaces, complete all as specifies and directed |
| 48 | S & F for vitreous casecade type single piece including dual flush type white PVC connection complete fixed and making good to floor, complete all as specified and directed |
| 49 | S&F Vitreous china WHB (oval type) 550x400mm, oval type fixing or an le back type with PVC (hdpe) 32 mm dia waste pipe, brass coupling 32 mm CP etc fixed in repair complete all as specified and directed. |
| 50 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 51 | S&F 15 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors incl cutting chasing and making good complete all as specified and directed. |
| 52 | S&F 20 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 53 | S & F PVC connections 15 mm size with PTMT nuts of length 600mm fixed complete all as specified and directed. |
| 54 | S&F PVC Nahani trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all as specified and directed . |
| 55 | S&F 15mm bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make:-Jaquar (FLR-5047N) or equivalent of Kohler, Roca |
| 56 | S&F 15mm dia pillar taps, cast copper alloy with capstan heads chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. Make:-Jaquar (FLR-5015) or equivalent of Kohler, Roca |
| 57 | S&F 15 mm bore angle/ stop cock, cast copper alloy fancy type chromium plated screwed down high pressure with crutch & butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed. Make:-Jaquar (FLR-5047N) or equivalent of Kohler, Roca |
| 58 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls. complete all as specified and directed. |
| 59 | S&F 110mm bore PVC (SWR) bends any radius. complete all as specified and directed. |
| 60 | S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal any radius. complete all as specified and directed. |
| 61 | S&F 110mm bore PVC (SWR) junction double, (double T) equal or unequal any radius. complete all as specified and directed. |
| 62 | S&F 110mm bore PVC (SWR) cowl any radius. complete all as specified and directed. |
| 63 | S&F PVC (SWR) pipe inner dia 75mm single socketed in any length with rubber ring joint laid on wall/ceiling or laying in floors complete all as specified and as directed |
| 64 | S&F for 75 mm dia PVC (SWR ) bends and radius complete all as specified and directed. |
| 65 | S&F for 5 mm thick looking mirror of selected quality glass, mounted on 5mm thick PVC frame and shutter, fixed to plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 66 | S&F Vitreous china urinal half stall complete including fixing plugs,bedding urinal against wall in CM (1:2) securing urinal to plugs with 60mm or required size Brass screww complete all as specified and directed. |
| 67 | S & F PVC water tank Rotational moulded polyethylene water storage tanks 500 litres (cylindrical vertical with closed top) hoisted and fixed in position 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 68 | S&F Gun metal Gate/Ball Valve with iron wheel head screwed both end suitable for 20 mm dia pipe complete all as specified and directed. |
| 69 | Returning filling in including spreading levlling ,atering and well ramming any type of soil in layers nexc 25cm thick complete all as specified and directed. |
| 70 | Removing excavated material for soft / loose soil/ any type of soil exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed. |
| 71 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 72 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil,complete all as specified and directed. |
| 73 | Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 74 | M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over screed bed or bedding layer of cement mortar (1:6) 15 mm thick for laying floor finishes, complete all as specified and directed. |
| 75 | M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including cement screed and jointed, with rendering of cement mortar (1:4) 10 mm thick for laying floor finishes, roofs complete all as complete all as specified and directed. |
| 76 | S & F Vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm but n exc 1.0 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, with screed bed or bedding layer of cement mortar (1:6) 15 mm thick for laying floor finishes, roofs complete all as specified and directed. |
| 77 | S & F Vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm but n exc 1.0 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, with rendering of cement mortar (1:4) 10 mm thick for laying floor finishes, roofs complete all as specified and directed. |
| 78 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, drain etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 79 | S&F 10 mm thick vitrified paver tiles out door vitrified tiles area n. exc 0.36 sqm each as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed in CM(1:6) complete all as specified and directed |
| 80 | M&L for Chequered cement concrete tiles with grey pigment cement and pigments 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, over screed bed or bedding layer of cement mortar (1:6) 15 mm thick for laying floor finishes, roofs complete all as specified and directed. |
| 81 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, complete all as specified and directed. |
| 82 | M&L for preparation of new/old surface, washing, rubbing down and stopping of distempered and painted surfaces and Distempering walls with two coat of oil emulsion after applying coat of cement based putty, complete all as specified and directed. |
| 83 | Dismantling timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and directed. |
| 84 | S&F for MS Fe 410 -W (Gde- E- 250) quality-A, Steel work in Roof trusses (framed), trussed, purlins, post, crane gantries, stand, rails and fastenings and heavy bracketb framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, welding, bolting etc., complete all as specified and directed. |
| 85 | M&L for preparation of new/old steel surfaces of any description, over 10cm in width or girth & applying two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed. |
| 86 | M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with cresote, complete all as specified and directed. |
| 87 | M&L for cement concrete C1, 1:3:6 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 88 | M&L for Granite (of any type) tiles 16 to 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 89 | Taking down Chowkhat or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames), complete all as specified and directed. |
| 90 | Taking down Chowkhats or frames with shutter exc 1.5 sq. m but n exc 4 sq. m each (without taking off shutters from the frames), complete all as specified and directed. |
| 91 | S&F 4 mm Sheet glass, selected quality, in squares exc. 0.5 sq. m each pane, complete all as specified and directed. |
| 92 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 93 | S&F 125 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 |
| 94 | S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 95 | S&F ordinary rat tail rod pattern springs / capsule type made of brass including roller and roller plate, complete all as specified and directed. |
| 96 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, length of cover plate 150mm, complete all as specified and directed. |
| 97 | M&L for Providing precast cement concrete type B1, 1:2:4 (20.0 mm graded aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match, set in cement mortar 1:4, complete all as specified and directed. |
| 98 | Dismantling of Plain or corrugated PVC fibre sheeting, any gauge, thickness, including roof coverings, complete all as specified and directed. |
| 99 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 100 | S&F in repairs E-boards, ceiling, 4 mm thick with J framed work with main Tee of size 24 x 28.5 mm made out of PGI sheet .3 mm thick double at web and single at flange, flange coverd with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x .45 mm powder coated for ceiling , ceiling boards 60cm x 60cm x 4mm thick , suspended with GI wire 2mm dia and 2m average length with adjustable hanging device complete including plugging in brick/stone walls with steel rawl plug @ 600 mm C/C Ceiling board shall be pressed to the ceiling tee with staple clips at all four sides and incl making good of all disturbed/daimage surface of walls and applying two coat of oil bound distemper complete all as specified and directed. |
| 101 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed. |
| 102 | M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 103 | S&F in repairs Brass CP mixer 15mm for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 104 | Dismantling water tanks capacity exc 250 Ltr and n exc 500 Ltr and removing from site complete all as specified and directed. |
| 105 | S&F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 106 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. Including Tile Bedding layers and removing out side MD Land) complete all as specified and directed. |
| 107 | M & L for cement concrete in foundations, filling and masss concrete type C2 1:3:6 (40mm graded aggregate) complete all as specified and directed. |
| 108 | M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:4).complete all as specified and directed. |
| 109 | M&L for 15mm thick rendering on any faces of stone, concrete or brick work in CM 1:4 surface finished even and fair complete all as specified and directed. |
| 110 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil complete all as specified and directed. |
| 111 | Fixing only in repair chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 112 | Supply only chain link fencing, any width and dia of wire not less than 3.00 mm complete all as specified and directed.Note - Weight of chain link fencing shall be assertain by BOO. |
| 113 | M & L for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for securing chain link fencing complete all as specified and directed. |
| 114 | M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed.. |
| 115 | Fixing only MS Angle iron post after necessary making good incl cutting welding drilling hole obtain from dismentling of existing fencing post cpmplete all as specified and directed |
| 116 | Dismentling of fencing wire mesh any type complete all as specified and directed. |
| 117 | Dismantling posts or struts concrete work or brick masonry (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 118 | M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed. |
| 119 | M & L for providing, cement concrete type B1 1:2:4 (20 mm graded aggregatet) in pedding / coping roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 120 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete. complete all as specified and directed. |
| 121 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 25cm deep and getting out on hard and dence soil complete all as specified and directed |
| 122 | Removal of excavated material (soil) to a distance exc 50 m n. exc 250 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 123 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.. |
| 124 | Supply and fixing in repair Concertina Coil Mild steel punched tape concertina coil with Zinc coating 450mm Ø with clips spaced 24mm dispensed in compact rolls weighing 7.5 kg/coil covering an average span of 7.5m on expansion to be laid between the 'Y' angle pickets joining by welded at 45 degree slope LAIP complete all as specified and directed. |
| 125 | S&F for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 126 | S&F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 127 | Dismentling of wrought iron and mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 128 | M&L for Black colour solid ACP wall lining consisting of 3mm thick plain inclusive of solvent cement /Adhesive including Alluminium frame work complete all as specified and directed. |
| 129 | M&L for SS Box type LettersHeight 12\\" to 18\\" including Led Lighting and connection up to Main Socket/DB Nos of Letters up to 40 white fixed to ACP sheet as in repair complete all as specified and directed. |
| 130 | M&L for LOGO 0.5 to 1.0 m height with LED module & power supply cable DB etc as in repair complete all as specified and directed. |
| 131 | M&L for point wiring with 1.5 Sq mm, FRLSH, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through concealed conduit and including concealed PVC rigid non metalic conduit of size 19/20mm, on ceiling/wall, with and including continuous 1.5 Sqmm, FRLSH, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including sunk metal sheet enclosure rectangular terminal boxes of suitable size and incl frame plate, white modular cover plates suitable for mounting modular switches, sockets etc for Bell, light and fan points complete all as specified and directed. |
| 132 | ~ditto~All as per item No. 131 here in before but with one 3 pin, 5 amps, socket outlet on the same board. complete all as specified and directed. |
| 133 | ~ditto~All as per item No. 131 in before but with one 3 pin, 5 amps socket outlet on independent board. complete all as specified and directed. |
| 134 | ~ditto~All as per item No. 131 here in above but with 1100 Volts grade copper stranded conductor FRLSH cable of size 2.5 Sqmm main & with 2.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp on Independent board complete all as specified and directed. |
| 135 | Supply and fix modular switch type 230/ 250 volts, 6 amps, 1 module, single pole, one way, complete all as specified and directed. |
| 136 | Supply and fix modular socket out let multi purpose 2 in 1, 2/3 pin, 6 amps,2 module flush type, ISI marked complete all as specified and directed. |
| 137 | Supply and fix switch modular 16 amps, flush type, ISI marked complete all as specified and directed. |
| 138 | Supply and fix modular socket 2/3 pin combined, 6/16 amps 2 module, flush type, ISI marked complete all as specified and directed. |
| 139 | Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified and directed. |
| 140 | Supply and fix ceiling rose surface bakelite, three terminal complete all as specified and directed. |
| 141 | Supply and fix smart bright Batten Series, LED luminaire using LEDs 20/22 watt, natural white, 2200 Lumen, THD max 10 % ,CRI min 80 % with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start ,with 3 core flexible copper wire 1.5 sqmm and connecting accessories ,Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification complete all as specified and directed. |
| 142 | Supply and fix , 9W white LED track light / spot light / focus light / picture light (pack of 1 ) indoor light with rotatable head perfect for showrooms, shops and living room trackway not included natural white / warm white with rotatable head 6500 lumen, CRI min 80 % with diffuser which ensures uniform distribution and latest LEDs and drivers consistent light output with wide voltage protection range stable color start extruded Aluminium housing, Energy efficient, Flicker free start, with 3 core flexible copper wire 1.5 sqmm and connecting accessories, Inbuilt driver unit suitable for wall and celling mounting using necessary arrangment complete all as specified and directed. |
| 143 | Supply and fix , 9W round LED cob light / focus light natural white / warm white 6500 lumen, CRI min 80 % with diffuser which ensures uniform distribution and latest LEDs and drivers consistent light output with wide voltage protection range stable color start extruded Aluminium housing, Energy efficient, Flicker free start, with 3 core flexible copper wire 1.5 sqmm and connecting accessories, Inbuilt driver unit suitable for wall and celling mounting using necessary arrangment complete all as specified and directed. |
| 144 | Supply and fix in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 145 | Supply and fix LED street light / security light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and directed. |
| 146 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 147 | Supply and fix in replacement modular stepped type electronic fan regulator flush type, two module on the existing phenolic laminated etc., as required, single pole, 240 volts, grade 120W watts, 2 Module heavy duty and ISI marked complete all as specified and directed. |
| 148 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers and complete all as specified and directed. |
| 149 | S&F sheet metal enclosure MCB DB double door, single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified and directed. |
| 150 | S&F MCB Single Pole and Neutral 240Volt, 40 Amps, 'C' series,10KA breaking capacity complete all as specified and directed. |
| 151 | S&F MCB Single Pole 240Volt, upto 40Amps,10KA breaking capacity complete all as specified and directed. |
| 152 | Earthing complete for various equipments with galvanised steel earth plate electrode 600 x 600 x 6mm thick directly burried in the ground (earth pit not less than 2.25 metre deep below ground level) with top edge of earth plate not less than 1.5 m below the ground level, connected to G.I wire 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, GI pipe 20mm bore light grade for protection of earthing strip, PCC chamber 1:4:8, type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber plastered with 12mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge ( 0.63) 8 mesh per linear inch, 50mm thick cover of RCC 1:2:4, type B-1, using 20mm graded stone aggregate, reinforced with 8mm TMT bar at 100mm center to center both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR Part-I and as specified including excavation and earth work and connecting the earthing to an earthing test point as specified and testing on complete all as specified and directed.Note:- Unit rate quoted is inclusive of earth lead and protection pipe upto 7.5 metre from earth plate. |
| 153 | Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured 2 core X 10 SQMMwith multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the under mentioned type and sizes complete all as specified and directed. |
| 154 | Removal of excavated materials (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. |
| 155 | M&L dry river washed and screened dry sand for filling in trenches below and around the cable for cushioning including punning down as specified inrelevant clause of SSR Part I complete all as specified and directed. Note:- Punned thickness shall only be measured and paid. |
| 156 | Supplying and laying unreinforced precast concrete cable cover, class LV Type 2 flat, size 300mm x 180mm x 40mm complete all as specified and directed by Engr in charge. |
| 157 | Supply and laying pipe galvanized, “Medium class”, including fittings all required fiiting arrangementlike tee, elbow socket union etc for of dia 20 mm and all as directed. |
| 158 | Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator,light fittings etc., complete all as specified and directed.Note :-1. Contractor has to submit existing bldg inventory items having details of serviceable and unsearviceable and physically verified with JE E/M during the handing taking of sites and before commencement of work.2. If work commence without signing of E/M inventory then contractor will be solely responsible for missing of E/M items and decision of engr-in-charge will be final in this regard.3. All E/M items received from site as a schedule of credit should be stores at location decided by engr-in-charge and should be taken out from bldg premises / stored location with confirmation to engr-in-charge |
| 159 | M&L for Sub main wiring in repair with two single core PVC Insulated cable two run of size 4.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 4.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire complete all as specified and directed.Note : - Two run of 4 Sqmm & one run of 4 Sqmm cable shall be measured as one unit run. |
| 160 | M&L for Sub main wiring with two single core PVC Insulated cable two run of size 6.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 6.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire complete all as specified and directed. Note : - Two run of 6 Sqmm & one run of 6 Sqmm cable shall be measured as one unit run..Including taking down old unsv. |
| 161 | Supply and fix in replacement modular bell push, 1 module, 6 amps, complete all as specified and directed. |
| 162 | Supply and fix bell AC 230 volts, single polecomplete all as specified and directed. |
| 163 | Supply and fixing I LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed/surface type, as directed, with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 164 | Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified and directed. |
| 165 | Maintenance and checking of ceiling fan/exhaust fan of any size/type/make, checking the serviceability of all parts, electric connections etc. Preparation of old painted surfaces and painting with two coats of synthetic enamel paint of approved shade, reconnecting/hanging in original position, reconnecting the electric cables and testing complete all as specified and directed. |
| 166 | S&F in replacement sheet metal enclosure MCB DB double door , Triple pole and neutral, 440 volts, 4 way with 200 Amp, 10 KA breaking capacity rated copper bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified and directed. |
| 167 | Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 12 way, SPN, double door type, 240 Volt with 200 amps rated busbar complete all as specified and directed.(Note : MCBs will be Measured separately) Including taking down old unsv . |
| 168 | S&F in replacement MCB Triple Pole and Neutral 63 Amps,415 V ,10KA breaking capacity complete all as specified and directed. |
| 169 | Supply and laying & testing and commisioning LT underground cable 1100 volts grade,in repair XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the Size of 25 sqmm x 4 core and as per relevance IS code complete all as specified and directed. |
| 170 | Supplying and laying DWCPE pipe OD 50 mm , ID 40/38 mm complete all as specified and directed. |
| 171 | Schedule of credit of Amount Rs. 79,385.00 to be deducted during AOC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender