Tender For Repair And Maintenance Of Certain B/R And E/M Works At Avn Units In Age B/R-I Area Under Ge 873 Ews
Tender Value
30.41 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
20 days left
EMD
60820
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Certain B/R And E/M Works At Avn Units In Age B/R-I Area Under Ge 873 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed. |
| 2 | S&F Galvanised MS sheeting of 0.63 mm thick corrugated ISI Marked with two cougation side laps and fixed with coach screw and washers as in roof & wall, complete all as specified and directed. |
| 3 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 4 | S&F plain, galvanised MS sheeting of 0.63 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed. |
| 5 | Dismantling of wrought iron or MS works of any description not otherwise provided for complete all as specified and directed. |
| 6 | S&F rolled mild steel sections of Fe 410-W (GDE E-250) QUALITY “A” frame work as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, complete all as specified and as directed |
| 7 | M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier, complete all as specified and directed. |
| 8 | Demolition of Brickwork or stone/ boulder masonry built in cement mortar, complete all as specified and directed |
| 9 | M&L Pre-cast cement concrete of type C1, 1:3:6 (20mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width set in cement mortar 1:4, complete all as specified and directed. |
| 10 | Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. Complete all as specified and directed. |
| 11 | M&L for Rendering 10mm thick cement plaster 1:6 on fair faces of brick work or concrete surfaces, complete all as specified and directed. |
| 12 | M&L for Rendering 15mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces, complete all as specified and directed. |
| 13 | M&L for preparing newly plastered or pointed surface of wall and applying two coats of distemper over a coat of primer, complete all as specified and directed. |
| 14 | M&L for preparation of new or previously untreated plastered surfaces over 10cm girth or width and applying two coats of synthetic enamel paint over a coat of priming paints plaster coat, complete all as specified and directed. |
| 15 | M&L for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed |
| 16 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to stores and rubbish off the premises etc complete all as specified. |
| 17 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectuangular) area of each tiles not exc 0.06 sqm but exc 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed with colour cement to match the tiles laying over and including 15mm thick screed bed in cm 1:6 etc all as specified and as directed. |
| 18 | M&L for glazed ceramic coloured tiles of size 450x300 x7mm/300x600x 7mm thick including 10mm thick rendering in CM 1:3 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and drected. |
| 19 | S&F vetrified ceramic tiles light/dark shade 10mm thick (Square/rectangular) polished ,area of each tiles n.exc. 0.36 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match 15 mm thick in net cement screed (1:4) complete all as specified & directed. |
| 20 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thick (below or above ground level) complete all as specified and as directed. |
| 21 | M&L 25mm thick plain cment concrete 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate), complete as specified and directed. |
| 22 | M&L 100mm thick plain cment concrete 1:4:8 type B-2 using 40mm graded crushed stone aggregate) as in floor, complete as specified and directed. |
| 23 | M&L for chequered cement concrete tiles 20cmx20cmx 25mm thick, set and jointed and pointed in neat cement slurry in floors with grey cement and no pigment, over 20mm thick screed bed or bedding layer of CM 1:4, complete as specified and directed. |
| 24 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20 mm complete all as specified and directed. |
| 25 | S&F for 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 20 mm dia, complete as specified and directed. |
| 26 | Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept, bore of pipe 25 mm, complete all as specified and directed. |
| 27 | S&F in repairs 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 25 mm dia incl all as specified and directed. |
| 28 | S&F in repairs vitreous china water closet sqatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excuding flushing cistern and flush pipe) incl making good complete all as specified and directed |
| 29 | S&F as in repairs vitreous china water closet pedestal pattern white excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and as directed |
| 30 | S&F in repairs of plastic water closet seat, black or white closed pattern, solid type with flat bottom, cover and mild steel chromium plated hinging device complete all as specified and as directed. |
| 31 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 32 | S&F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position etc, complete all as specified and directed |
| 33 | S&F in repairs vitreous china Urinal, Half stall type, white (excluding flushing cistern and flush pipe and waste pipe) complete all as specified and directed. |
| 34 | S&F in repairs vitreous china wash hand basin of 550mmx400mm white flat back, CP waste coupling including angle iron brackets of 35x35x6mm etc, complete all as specified and directed. |
| 35 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plug washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc, complete all as specified and directed. |
| 36 | S&F in repairs pillar taps cast copper alloy 15mm bore with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 37 | S&F in repairs 15mm bore bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 38 | S&F in repairs 15mm Stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for uniuns and fixed complete all as specified and directed. |
| 39 | S&F in repairs PVC Connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 40 | S&F in repairs PVC flexible waste pipes 32/38 mm bore 80 centimetre long complete all as specified and as directed |
| 41 | Dismantling/ taking down PVC/ Cast iron soil /waste pipes 110 mm / 75mm bore including all fitting like bends etc complete all as specified and directed |
| 42 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor 110mm bore complete all as specified and directed. |
| 43 | PVC bend any radius size 110mm bore with access doors complete all as specified and directed. |
| 44 | M&L in repair PVC(SWR) multi floor trap plain with gratings including jointing to waste pipes with solvent cement size 75mm bore complete all as specified and directed. |
| 45 | Dismantling of water tanks 500 litres capacity of any description and removing to store complete all as specified and directed. |
| 46 | S&F in repair puff water tank 500 litres capacity, insulated cylindrical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temprature -30 degree to +35 degree celcius fixed in position with all fittings over PCC platform, complete all as specified and directed. |
| 47 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 48 | Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/ blanket any thickness including cover filllets. |
| 49 | M&L for 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls, complete all as specified and directed. |
| 50 | M&L 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in ceiling, complete all as specified and directed. |
| 51 | M&L for readymade softwood wall panelling in strips of 100mm width 10mm thickness having tongue and groove filling arrangement fixed to wooden frame work as per manufacturer instruction, complete all as specified and directed. |
| 52 | S&F GI frame work of size (605 x 605) mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre/ nnintermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, Hangers 6 mm dia. GI. (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long complete including 04mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws incl taking down & refixing all electric fittings, fixture and wiring, complete all as specified & directed. |
| 53 | Dismantling timber framed in fillets,rails, posts rafters,purlines, etc under 40 sq cm in section |
| 54 | M&L second class Hardwood plain filllets, rectangular in section, clean swan, secured with nails exc 13 and n.exc 25 Sqcm, complete all as specified & directed. |
| 55 | M&L for 12mm width teak wood lipping 6 mm thick for Partical board/block board complete fix with nail, complete all as specified & directed. |
| 56 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n. exc 4 Sqm each (Steel/Wooden/PVC), complete all as specified & directed. |
| 57 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified. |
| 58 | S&F plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints etc complete all as specified and directed. |
| 59 | S&F 30mm plain, solid, straight 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified & directed. |
| 60 | S & F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 61 | S & F butt hinges 100mm, medium weight, cold rolled mild steel and fixed complete all as specified and directed. |
| 62 | S&F 250mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 63 | S & F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 64 | S & F 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 65 | S&F 150mmAluminium handles, cast type, anodised complete all as specified and directed. |
| 66 | M&L for preparation of newly wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed |
| 67 | Taking down carefully damaged copper/aluminum point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, cassing & capping, pendants, sockets, light fitting etc and making good disturbed surfaces of wall/ roof complete all as specified and directed. |
| 68 | Taking down of MCB DB/TPN 8 way including MCB SP and SPN and making good of wall complete all as specified and directed. |
| 69 | M&L for point wiring using 1.5 Sqmm single core FRLSH PVC insulated unsheathed multi stranded copper conductor cable 1100V grade drawn through with incl PVC casing in capping /conduit (size of as required at site but not less than 20mm) with accessories like bends tees, junction boxes and terminal boxes for mounting fittings etc. fixed on recessed in wall or ceiling etc including 1.5 Sqmm single core FRLSH PVC insulated but unsheathed multistrandard copper conductor cable 1100V grade as earth continuity wire connected to common earth dolly with incl factory made GI sheet sunken box , cover plate and making good disturbed surface of walls, floors, etc. complete all as specified and directed. |
| 70 | One light/fan point controlled by one 5 Amps one way switch |
| 71 | One 3 pin socket outlet 5 Amps on independent board |
| 72 | One 3 pin socket outlet 5 Amps on same board |
| 73 | M&L point wiring for power point with 2.5 sqmm (nominal area) copper conductor FRLS-H cable ( multi-stranded) PVC insulated and unsheathed cable conductor 1100 Volts drawn through PVC Casing & Caping of suitable size(as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including steel sunken box/Gang Box of suitable size and shape with modular cover plate ISI marked complete all as specified and directed. |
| 74 | S&F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed. |
| 75 | S&F Socket outlet 2 in 1, 3 pin, 6A (multipurpose) suitable for 3 pin / 5 pin plug complete all as specified and directed. |
| 76 | S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed. |
| 77 | S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose), Complete all as specified and directed. |
| 78 | S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 79 | S&F Rechargeable LED Bulb 9 W ,220 V, white color all, Complete all as specified and directed. |
| 80 | S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 20W, 4 ft long, 220 Volts, and connecting to ceiling rose with Two core twisted flexible copper cable of suitable size complete all as specified and directed. |
| 81 | S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed. |
| 82 | M & L for in replacement of sub main wiring using two single core FRLSH PVC insulated, unsheathed stranded copper conductor cable of size 4 Sq.mm of 1100 Volts voltage rating drawn through and including PVC casing caping of size not less than 25mm with standard accessories, along-with one run of FRLSH PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4.0 Sq.mm as earth continuity conductor complete all as specified and directed.Note: Two run of single core FRLSH PVC cable with one run of earth conductor and conduit shall be measured as one unit. |
| 83 | S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed. |
| 84 | S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. |
| 85 | S&F MCB SPN 240V, 10KA 'C' curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed. |
| 86 | S&F LED light fitting 1X10W bulkhead luminaires including LED light and driver holder connecting up with two core flexible copper conductor cable of suitable size all as specified and directed. |
| 87 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, complete all as specified and directed. |
| 88 | S&F LED flood light 210 watt 230 VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. |
| 89 | S&F in replacement 1100 volts grade heavy duty armoured cable XLPE insulated aluminium conductor 16 sq. mm, 4 core overall PVC sheathed cable complete all as specified and directed. |
| 90 | M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed. |
| 91 | Supply, laying, fixing, passing through DWC pipe XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 25 sqmm 3.5 core, Including all accessories such as bends, tees, junction boxes, elbows, etc on surface/in channel fixed with GI saddle clamps duly screwed, as required. It also includes cutting of chases and making good the same with cement mortar and finishing of disturbed surfaces with plaster of Paris/putty/distemper/colour wash to match the existing surface, complete all as specified and as directed. |
| 92 | S&F Double wall corrugated (DWC) outer pipe 50 mm and inner dia 38 mm fix complete to Wall, Poles etc with suitable clamp for protection of cable complete all as directed |
| 93 | Supply ,Install Testing & Commissioning of self supporting totally enclosed double door at front, Indoor AC power supply LT panel compartmentalised design, dust and vermin proof of size 600 mm(Height) x 400 mm(Length) x 300 mm(Width) suitable for 440 Volt 3 phase 4 wire system made out of 3.15 mm thick CRCA sheet and built upon regid frame work having front and rear hinged doors with neoprence rubber gasket including danger plate, earthing strip point and, ventilation louvers at the rear side, bottom detachable gland plate complete with suitable size of Zinc/Cromium plated and nuts, bolts ;and washers etc. The pannel shall be synthetic enamelled painted and the control circuit diagram shall be with colour code solid conductor copper 1.5/2.5/4.00 sqmm cable for easy identification including incomming/outgoing cable holes at the bottom. The Panel shall be emmbeded with 75 x 6 mm MS Angle Iron frame and to be grouted with PCC foundation (1:2:4 ) type B2 upto a height of 50 cm from normal ground level complete all as specified and directed by Engr in charge and comprising of the followings.(a) MCCB 250Amp TP with spreder links-01Nos(b) Digital voltmeter-01Nos(c) Digital AMP meter-01Nos(d) Selector Switch (VSS) - 01 Nos(e) Selector Switch (ASS) - 01 Nos(f) Indication Lamp R,Y,B(g) NATO Connector 63Amp 3P - 03 Nos(h)NATO Connector 32Amp 3P - 03 Nos(j) NATO Connector 32Amp 1P - 03 Nos(k) 15Amp Switch-Socket Combined 1P - 02 Nos |
| 94 | M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth strip 32 mm x 6 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed. Note -for AC Panel |
| 95 | Deduct Schedule of Credit of as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender