Tender For Certain Repairs Including Petty Repair To Md Accn At Dbn Vihar, S&T Line, Map Jindan, Puran Road, Mh Colony, Map Hudson Line Jcos/ Or, Old And New arc-biannual rate contract Line, Abdul Hamid Vihar Accn & Mes Qtrs Nalwa Road Age B/R-Ii Of
Tender Value
40 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
0 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repairs Including Petty Repair To Md Accn At Dbn Vihar, S&T Line, Map Jindan, Puran Road, Mh Colony, Map Hudson Line Jcos/ Or, Old And New arc-biannual rate contract Line, Abdul Hamid Vihar Accn & Mes Qtrs Nalwa Road Age B/R-Ii Of Ge (E) Jrc (Tender Id No 2026_Mes_778471_2)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-Oct-2026 |
| 2 | 30-Oct-2026 | Corrigendum No 01 dated 30 Oct 2026 | Date | 31-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down and refixing the shutter of any description in the same opening after easing and adjusting and making the door closing properly area of shutter of area exc 1sqm and not exceeding 2 sqm each, complete all as directed by engr -in-charge. |
| 2 | Resecuring or earsing and adusting without taking down of shutters of any description exc 1 sqm and n-exc 2 sqm each, complete all as specified and as directed. |
| 3 | S&F in repair MS tower bolt 200 mm stove enamelled black with bright bolt and fixed, complete all as specified and as directed. |
| 4 | S&F in repair Aluminium anodised, barrel tower bolts 150 mm long, complete all as specified and as directed. |
| 5 | S&F in repair MS sliding door bolts of size 250mm plate type stove enamelled black with bright bolt not less than 12mm dia with and including 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and as directed. |
| 6 | S&F in repair 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed. |
| 7 | S&F in repair 125mm MS pressed handle oval type stove enamelled black, complete all as specified and as directed. |
| 8 | S&F in repair 150mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and as directed. |
| 9 | S&F in repair 100 mm SS butt hinges, medium weight cold rolled fixed with screws or welded on wooden or steel frame, complete all as specified and as directed. |
| 10 | S&F in repair 75 mm SS butt hinges, medium weight cold rolled fixed with screws or welded on wooden or steel frame, complete all as specified and as directed. |
| 11 | S&F in repair 150mm MS ordinary rat tail rod pattern springs incl roller and roller plate complete (Helical door spring) Make Ritz or equivalent as approved welded to steel chowkets . |
| 12 | Supply& fixing in repairs 2nd class hard wood plain fillets square or rectangular or tri angular in section clean sawn planed on both sides secured with nails or beads in section exc 13sqcm and n-exc 25 sqcm including two coats of synthetic enamel paint over acoat of pink wood primer complete . |
| 13 | S&F in repair 12 mm plywood, grade BWR type BB fixed with screw to timber frame work for shutter,shelves etc including removing old work from site any thickness, complete all as specified and as directed. |
| 14 | S&F in repair 6 mm plywood, grade BWR type BB fixed with screw to timber frame work for shutter,shelves etc including removing old work from site any thickness, complete all as specified and as directed. |
| 15 | Petty repair to wooden/PVC Cup Board shutters by making minor adjustment to hinges etc easing shutter incl taking down of shutter if required and refixing in same position including welding to angle iron chowkhats |
| 16 | S&F in repair Aluminum floor door stopper 63 mm with two rubber legged, complete all as specified and as directed. |
| 17 | Petty repair to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable, complete all as directed by engr -in-charge. |
| 18 | S&F in repair steel peg stay 250mm long black japan fixed with screw or weleded if required, complete all as specified and as directed. . |
| 19 | Welding in repairs not exceeding 2.5 cm in length & thickness of metal to be welded not exceeding 6 mm including material & labour, complete all as specified and as directed. |
| 20 | S&F in repair anti dusting rubber beeding for door shutter for anti snakes, dusting etc, complete all as specified and as directed. |
| 21 | M&L for 3 mm thick plain glass fixing and glazing with oil putty/nails wire including haking out old broken glass in wooden/steel frame, complete all as specified and as directed. |
| 22 | M&Lfor 3 mm thick figure glass , pin head type fixing and glazing with oil putty/nails wire including haking out old broken glass in wooden/steel frame, complete all as specified and as directed. |
| 23 | S&F in repair galvanised mild steel wire cloth nominal dia of wire 0.45mm and average width of aperture 1.18mm in wooden/steel frame, complete all as specified and as directed. |
| 24 | M&L for mild steel pipe 25 mm dia curtain rod with PVC coating fixed in the MS hooks, and finials/side brackets (both side)/wall to wall etc, shade as approved by GE, complete all as specified and as directed. |
| 25 | Petty repair to PVC door shutters by making minor adjustment to hinges etc easing shutter incl taking down of shutter if required and refixing in same position including welding to angle iron chowkhats, complete all as specified and as directed. |
| 26 | Petty repair to existing built in steel cup board, locks, hinges including necessary welding and making the lock/ steel cup boards complete serviceable all as per existing pattern as directed including provision of new keys, complete all as specified and as directed. |
| 27 | M&L in repairs 19/20mm thick prelaminated ply board exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination as a cup board shelf, fixed with screws to timber framed work including fixing arrangement, complete all as specified and as directed. |
| 28 | M&L for Decorative laminate 1 mm thick type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions with Cup Board or drawers, complete all as specified and as directed. |
| 29 | S&F in repair peg set of six made of stainless steel, complete all as specified and as directed. |
| 30 | S&F Fanlight pivot aluminium with plale size 25mmx 65 mm and suitable fm shutter of 30mm thickness and fixed |
| 31 | S&F 40mm dia, cupboard knobs brass polished fixed with nut, screw and washer of mild steel, bright finished |
| 32 | S&F Ball catches with 8mm dia stee lball, and brass body and striking plate including letting in and fixed, complete all as specified and as directed. |
| 33 | S&F 100 mm Hasp & Staple extruded aluminium alloy , fabricated type, anodised including bolt to hinge plate and fixed with screws with Cup Board shutter, complete all as specified and as directed. |
| 34 | M&L for 6mm thick asbestos cement fiber, corrugated or semi-corrugated sheets in patches not exceeding 3 nos sheets in each patch including refixing of connected sheets fixed with L-type or J-type or cranked hook bolts in roofs, walls etc also including dismantling of of existing broken sheets in roof coverings, complete all as specified and as directed. |
| 35 | M&L for repairing of RCC projections, chajjas , roofs, facia etc. in patches not exceeding 3 Sqm in each patch by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sqmtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height, complete all as specified and as directed. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor. |
| 36 | S&F medium grade steel water tubing, 15 mm bore galvanised (including taking down) with all fittings such as Union , Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or layed in floors, complete all as specified and as directed. |
| 37 | S&F medium grade steel water tubing, 20 mm bore galvanised (including taking down) with all fittings such as Union , Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or layed in floors, complete all as specified and as directed. |
| 38 | S&F in repair 15mm/20mm/25mm bore GI elbow/tee/union replaced independly as per approved by Engineer-in-Charge |
| 39 | S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt 210 gm), complete all as specified and as directed. |
| 40 | S&F in repairs for 20/25 mm bore Gate Valve of brass cast copper aloy high pressure screwed for iron pipe and fixed, complete all as specified and as directed. |
| 41 | Cleaning of over head tank of any description and any capacity descaling, washing complete with soap solution and removing vegetation around the over head tank/plate form including opening and reconnecting with GI tubing as site requirement, complete all as directed by engr -in-charge. |
| 42 | S&F PVC cover of water tank maching with existing water tank, complete all as specified and as directed. |
| 43 | S&F 500 ltr rotational UV protected antimicrobial tripple layer moulded polythylene water storage tank white colur (Cylindrical vertical with closed top) hosted and fixed in position incl dismantling of existing tank of any description ISI marked, complete all as specified and as directed. |
| 44 | S&F 1000 ltr rotational UV protected antimicrobial tripple layer moulded polyethylene water storage tank white color (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank of any description, complete all as specified and as directed. and ISI Marked |
| 45 | S&F in Repair PVC white low level flushing cistem 10ltrs capacity with all fittings syphonic action push stype with inlet ball valve and float incl PVC flush pipe, ball valve, handle, MS bracket etc, complete all as specified and as directed. |
| 46 | Petty repair to leaking flushing cistern low/high level, incl adjustment in the internal fitting repair to PVC bends pipe, flush pipe etc all as per directed by Engineer-in-Charge |
| 47 | S&F in repair vitreous china squatting pan of Orisa pattern size 580mmx400mm white with ‘P’ or ‘S’ trap front or back inlet and integral foot rest, complete all as specified and as directed. by Engineer-in-Charge. |
| 48 | S&F in repair vitreous china ware wash hand basin white flat back size 550mm x 400mm excl taps, waste chain and plug and porecelain stopper but incl bracket and cutting for and pinning in ends of brackets or erecting stand. |
| 49 | S&F vitreous china wash down water closet (Pedested patern ) white incl fixing bolt, plastic water closet seat cover black/white closed pattern with flat bottom and cover and mild steel chromimum plated hinging device, fixed in repairs, complete all as specified and as directed. directed by Engr-in-Charge. |
| 50 | S&F in Repair waste Coupling Suitable for Existing WHB/Sink, complete all as specified and as directed. |
| 51 | S&F in repairs waste pipe suitable for Existing WHB/Sink, complete all as specified and as directed. |
| 52 | Petty Repair for stop leaking of CP Brass Bib tap/ Pillar tap/Stop cock/ by suitable spindle and etc, complete all as specified and as directed. |
| 53 | Petty Repair for stop leaking of any type CP Brass bib tap/ Pillar tap/Stop cock/wall or WHB Mixture by suitable original marked spindle(Mini weight-100 grams), complete all as specified and as directed. |
| 54 | S&F in repairs for 15 mm bore bib taps of PTMT any colour high pressure screwed for iron pipe and fixed(Minimum weight 15mm-90 gms) |
| 55 | S&F in repair Bib tap cast copper alloy suitable for 15mm bore iron pipe, complete all as specified and as directed. |
| 56 | S&F in repair Bib tap cast copper alloy , chromium plated suitable for 15mm bore iron pipe with long body fancy type, complete all as specified and as directed. |
| 57 | S&F in repair 15 mm bore stop cock PTMT of any colour screwed for iron pipe and fixed (Min wt 15mm-90mm), complete all as specified and as directed. |
| 58 | S&F in repair 20 mm bore stop cock PTMT of any colour screwed for iron pipe and fixed (Min wt 15mm-90mm), complete all as specified and as directed. |
| 59 | S&F in repair pillar tap, PTMT 15mm bore dia of pipe screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and as directed. |
| 60 | S&F in repair pillar tap, cast copper alloy, with capstan heads, 15mm bore dia of pipe chromium platted screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and as directed. |
| 61 | S&F in repair mixer fancy type single/double legged cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed to wash hand basin, complete all as specified and as directed. |
| 62 | S&F in repair PVC connection fiber, reinforced 45cm long 15mm in size with brass check nut and PVC washers at both ends, complete all as specified and as directed. |
| 63 | S&F in repair 15mm Angle/stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle screwed at two right angles ends for both iron pipe, complete all as specified and as directed. |
| 64 | S&F in repair CP 15mm stop valves (concealed type), screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed ., complete all as specified and as directed. |
| 65 | S&F in repair brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to GI pipe, complete all as specified and as directed. |
| 66 | M&L in repair PVC bath room cabinet of size 535 x 483 mm x 110 mm with mirror fixed in repairs, complete all as specified and as directed. |
| 67 | S&F in repair Brass chhromium plated tubular tower rail 20mm dia , D type, 60cm long between flanges, complete all as specified and as directed. |
| 68 | S&F in repair Brass chhromium plated tubular tower ring 150mm square/rectangular type, between flanges, complete all as specified and as directed. |
| 69 | S&F in repair Soap dish stainless steel chromium plated fixed with brass screws and rawl plug, complete all as specified and as directed. |
| 70 | Acrylic corner set of 3 pieces as per sample approved by Engr -in-charge all as specifed and ad directed. |
| 71 | S&F in repair for 600 mm X450 mm looking mirror of any size 5.5mm thick with aluminium frame selected quality mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screw and cup washer, complete all as specified and as directed. |
| 72 | S&F Chromium plated health faucet for EWC with 1 m long CP tube with CP wall hook superior quality, complete all as specified and as directed. |
| 73 | S&F Toilet paper holder of Chromium plated fixed to walls with chromium plated (CP) brass screws,all as specified and directed |
| 74 | S&F in repair plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinging device, fixed in repairs, complete all as specified and as directed. Engr-in-Charge. |
| 75 | S&F in repair Mild steel chromium plated jet for EWC 600mm long tube superior quality, complete all as specified and as directed. |
| 76 | M&L in repair stainless steel plate rack of superior quality size 36\\" x 24\\" with not less than 8 kg , complete all as specified and as directed. |
| 77 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and waste coupling and waste pipe over all size 915 mm x 460 mm bowl size 410 mm x 330 x 160 mm., complete all as specified and as directed. |
| 78 | S&F in repair CP gratting 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani Trap or floor trap, complete all as specified and as directed. |
| 79 | S&F in repair for 110mm PVC pipe single socketed in any length with rubber joints fixed to wall, complete all as specified and as directed. |
| 80 | S&F in repair for 110mm PVC bends / shoe of any radius, complete all as specified and as directed. |
| 81 | Cleaning of floor trap and applying of cement around the floor trap with sealant compound for arresting the seepage, complete all as specified and as directed. by Engr-in-Charge. Make:- WACKER SILICONES (GP Silicone Sealant ) |
| 82 | Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water, complete all as specified and as directed. |
| 83 | M&L for 15 mm thick cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement, complete all as specified and as directed. |
| 84 | M&L for prepration of newly plastered surfaces of walls including cornices pilasters etc and applying two coat of oil Emulsion Distemper (OBD) over a coat of birla while putty, complete all as specified and as directed. |
| 85 | M&L for 15 mm thick cement mortar 1:4 with WPC on brick or concrete surface finished even and smooth without using extra cement, complete all as specified and as directed. (WPC shall be measured and paid separately) |
| 86 | Integral waterproofing compound supplied only, complete all as specified and as directed. |
| 87 | M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces finished surface even and smooth without using extra cement as in ceiling surfaces, complete all as specified and as directed. |
| 88 | M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces, complete all as specified and as directed. |
| 89 | M&L for prepration of new surfaces of walls including cornices, plasters etc (Plastered or unplastered surfaces) and applying two coats of cement base paint over a coat of primer, complete all as specified and as directed. |
| 90 | M&L Prepration of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces),washing rubbing down and stopping of distempered and painted surface and applying one coat of oil Emulsion Distemper (OBD), complete all as specified and as directed. |
| 91 | M&L for Complete removal of existing surfaces of wall and applying two coats of oil Emulsion Distemper (OBD) over a coat of birla white wall care putty, complete all as specified and as directed. |
| 92 | M&L for preparation of old decorated plastered surface of ceiling including cornices pilasters etc.and applying one coat of white wash on ceiling, complete all as specified and as directed. |
| 93 | M&L for preparation of old decorated surfaces of walls including cornices pilasters etc (plastered or unplastered surfaces) ,washing rubbing down and stopping of distempered and applying one coat of cement base paint, complete all as specified and as directed. |
| 94 | M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint of (white or tinted), complete all as specified and as directed. |
| 95 | M&L for preparation of old painted surfaces of steel of any description not other wise described over 10cm width or girth and applying one coats of synthetic enamel paint, complete all as specified and as directed. |
| 96 | S&F steel window/ventilator with glazed shutter with side hung/ top hung shutters including box type hinges, steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars, hold fast, tower bolts and handleS&Flat iron etc and necessary cooler arrangement in window and fixed with PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate), complete as per Drg No. CEJZ/WD-1655/22 & CEJZ/TD-1019/08 sheet 1/3 to 3/3. Note : The above rate for glazed shutter window/ventilator and measured one time clear opening for payment of window |
| 97 | Ditto all as per item no 96.00 above but in gauzed shutters without sash bars, complete all as specified and as directed. |
| 98 | S&F framed work such as grills, gratings, etc .with ends of bars shouldered and/ or riveted , or forget into spikes ; framed guard bars barallel iron doors and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed. |
| 99 | Cleaning of roof removing bushes, mud, debris, digging out roots and making good the disturbed portion of roof tiles with 15 mm thick CM (1:3) including 2% water proofing compound as per wt of cement matching the same, complete all as specified and as directed. |
| 100 | M&L for refixing in repair of machine pressed precast concrete interlocking paver block with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-35 grade over and including 30mm thick crushed stone sand layer, complete all as specified and as directed. |
| 101 | Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and disposal of rubbish outside MD land, complete all as specified and as directed. |
| 102 | M&L for non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry and pointed in while or coloured cement to match over and including 15mm thick bedding layer CM 1:6, complete all as specified and as directed. |
| 103 | Ditto all as per srl item No. 102.00 above, but in skirting and 10mm thick rendering as backing coat of CM 1:4 |
| 104 | M&L for 25mm thick cement concrete (1:2:4) type B-1 (12.5 mm graded aggregate) to receive the top layer of tiles, complete all as specified and as directed. |
| 105 | M&L for coloured glazed tiles of size 450x 350x7 mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 10mm thick rendering in CM 1:4, complete all as specified and as directed. |
| 106 | S&F 18 to 20mm thick granite (of any type) tiles machine cut , in skirting/dado laid over cement screed 10 mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and dismentling of existing granite, complete all as specified and as directed. |
| 107 | S&F factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For - Kitchen Cabinets/Cupboards. |
| 108 | All as per above item but One side Laminated Board complete all as per specified and directed. |
| 109 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised., width of flaps when open in 30mm, complete all as specified and as directed. |
| 110 | S&F stainless steel soft close hydraulic clip on concealed hinges for full overlay (0 degree crank ) for kitchen cupboard , complete all as specified and as directed. and directed. |
| 111 | S&F 75mm Extruded aluminium alloy handles, fabricated type,anodised, complete all as specified and as directed. |
| 112 | M &L for Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WCs etc shall be as under:-(i) Application of Two component acrylic modified cementitious coating(aa) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coating and achieve a gripping profile that is clean, dry and free from laitance and dry other form of surface contamination. The installation instructions in manufacture's published literature should be strictly complied with, including but not limited to the following:-(bb) Chipping out any visible cracks in \\"V-Groove\\" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/Dr Fixit 302 SBR latex/ Perma latex SBR/FOSROC Nitabond SBR latex/Asian paint latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required.(cc) Dampen all surfaces immediately ahed of application of Acrylic modified Cementitious coating of sika Top Seal-107/Brush Bond FOSROC/Dr Fixit/STP/CICO.(dd) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified cementitious coating of SIKA Top Seal-107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions. (ee) Apply glass fabric sheet of SIKA Fab 1/FOSROC/Dr Fixit/STP whilst the first coat is wet. |
| 113 | (ff) Once touch dry, apply second coat of Acrylic modified cementitious coating of SIKA Top Seal -107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions on the entire area.(gg) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat.(hh) The waterproofing coating should be taken to a height minimum 300mm above the finished floor level on the vertical surfaces three sides including dismantiling of existing tiles.(jj) It is essential to cure Acrylic modified cementitious coating immediately after application (minimum 6-8hrs drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking.(kk) A protection plaster 12-15mm thick) in CM 1:3 admixed with appropriate integral water proofing compound has to be applied on the walls. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645. Providing and applying a protection screed of 50mm thick 1:4, cement sand mortar admixed with SIKA Plastocrete over the applied water proofing coating on horizontal surfaces. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645.(ll) All the corners and joints should be pretreated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of Make SIKA Seal Tape/FOSROC/Dr Fixit/STP. |
| 114 | (mm) The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations.(nn)Waterproofing treatment has to be carried out through applicators authorised by the respective manufacturer's and approved by GE.(ii) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealent.(iii) All CI traps in sunken slab to be enclosed with PCC 1:1.5:3 (Min 15cm) all around.(iv) The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40mm stone aggregate), complete all as specified and as directed.(v) Providing drainage spout pipe GI pipe 40mm dia bore light grade upto outside of outer wall ( Approx 450mm to 600 mm long ) including cutting to existing wall and making good the disturbed surface, complete all as specified and as directed.(vi) Providing 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for laying floor finish, complete all as specified and as directed. Note:-Item No 25 (iv) ,(v) &(vi) shall be measured and paid seprately. |
| 115 | M&L Cement concrete 1:5:10 type E-2 (using 40mm stone aggregate) as in sunken flooring, complete all as specified and as directed. |
| 116 | S&F drainage spout pipe GI pipe 40mm dia bore light grade upto outside of outer wall (Approx 450mm to 600 mm long ) including cutting to existing wall and making good the disturbed surface, complete all as specified and as directed. |
| 117 | M&L 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for laying floor finish, complete all as specified and as directed. |
| 118 | Demolition of brick tiles single layer as in roof covering, complete all as specified and as directed. |
| 119 | Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof), complete all as directed directed by Engr-in-charge. |
| 120 | M&L for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in benching, roof padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges, complete all as specified and as directed. |
| 121 | M&L for 10mm thick cement plaster in cement mortar (1:3) mixed with integral water proofing compound in the proportion recommended by manufacturer, on concrete roof surfaces finished even and fair, including cleaning the roof top by scraping down with water etc, complete all as specified and as directed. and directed by Engineer-in-Charge (WPC shall be measured and paid separately under appropriate item of this BOQ). |
| 122 | Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all all protrusion to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V-groove filled with repairs mortar/ microconcrate/ general purpose grout as recommended proportionally as per recommendation of manufacture. Making of Gollas at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acylic of cement weight, complete all as specified and as directed. |
| 123 | Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin; harder) application with 100% water dilution and Pure polyurethane application in 2 coats with a total min consumption of 1.25 kg per Sqm. Application should be done with Graco sprayer by a company authorised applicator”, complete all as specified and as directed. |
| 124 | M&L for Brushing neat cement slurry with 3 kg of cement per sq. meter, complete all as specified and as directed. |
| 125 | M&L for Bitumen Primer shall be applied on plastered surface of roofs at the rate of 0.40 Kg/Sqm of Surface area of roof for use in water proofing and dump proofing treatment, complete all as specified and as directed. |
| 126 | M&L Painting the roof surface with a coat of hot blown paving industrial bitumen 85/25 as a bonding material in two coats one on primed surface & 2nd on APP based polymeric membrane at the rate of 1.20 kg/sqm, complete all as specified and as directed. |
| 127 | M&L for APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick rainforced with five layer polyster non wove fabric ( wt. Not less than 150 gms/sqm) laid on primed surface by forced application, complete all as specified and as directed. |
| 128 | M&L for 40 mm thick brick tiles with 15 mm thick bedded layer of 1:3 CM laid on 2nd bitumen coated surface and joints grouted flush mortar 1:3 mixed with 5% of crude oil by weight of cement, complete all as specified and as directed. |
| 129 | Ditto all as per Item No 126 above but except brick tiles, complete all as specified and as directed. |
| 130 | M&L Cutting out cracks to V-section in existing RCC roof slabs or terracing , cleaning out & filling solidly with a hot mixture of bitumen and clean dry sand 1:1 ( by weight), complete all as specified and as directed. |
| 131 | M&L for flush pointing in cement mortar 1:3 on brick tiles laid flat including racking out joints/ pointing, hacking for key, scrubbing down with water, complete all as specified and as directed. |
| 132 | Demolition of brick work as in walls/parapet wall,s removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces, complete all as specified and as directed. |
| 133 | M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 M mean radius built in CM (1:6), complete all as specified and as directed. |
| 134 | Ditto all as per item No. 131.00 above but except bricks, complete all as specified and as directed. |
| 135 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing |
| 136 | S&F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing |
| 137 | Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each, complete all as specified and as directed. |
| 138 | Ditto all as per item No.135.00 above but area exc 1.5 Sqm and not exc 4 Sqm each, complete all as specified and as directed. |
| 139 | Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each, complete all as directed directed by Engr-in-charge. |
| 140 | M&L for framed work as in doors or gates of angle or other section with gusset plates, hold fast rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, complete all as specified and as directed. |
| 141 | S&F pressed steel frames 125x60mm as per IS for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including PCC 1:5:10, type B0 (20mm aggregate) filling in steel frame, complete all as specified and as directed. |
| 142 | Ditto all as per item no. 139.00 above, but 105x60mm size, complete all as specified and as directed. |
| 143 | S&F for 35mm thickness of factory made flush shutter solid core construction with block board core & ply wood face panels, commercial type on both side including 40 x 6 thick 2nd class Hard wood lipping on edge, complete all as specified and as directed. |
| 144 | S&F glazed and skelton shutters factory made 35mm thick open rebated and prepared to receive glass, gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24(a), complete all as specified and as directed. |
| 145 | S&F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 31, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
TodayOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender