Tender For Providing Kid Play Equipment, Wall Art And Rubber Mat In Newly Constructed Of Creche Building At Combined Court Complex In Coimbatore District.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Oct 2026
14 days left
EMD
3500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Kid Play Equipment, Wall Art And Rubber Mat In Newly Constructed Of Creche Building At Combined Court Complex In Coimbatore District.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and paving FLOOR MAT with new and best approved quality interlocking Rubber Mat 10mm thick including cost of Materials and labour charges including transporting, spreading and sticking etc., complete complying as directed by the departmental officers.(The mat should be got approved by the Executive Engineer before use on work). |
| 2 | Painting the wall eith DECORATIVE ART of approved design and colour including cleaning and preparation of wall surface, minor filling and smoothing wherever necessary, application of approved adhesive, fixing, alignment, trimming, joint finishing and protection, complete in all respects as directed by the departmental officers. The rate shall include cost of all materials, printing, transportation, labour, Tools and Plants and tackels, scaffolding / access arrangements, fixing finishing at place shown by the departmental officers and all incidental charges etc., complete complying as directed by the departmental officers.(The materials, design and colours should be got approved by the Executive Engineer before use on work). |
| 3 | Fabricating, Supplying and fixing in position Mosquito net arrangements of Openable type. The Outer frame shall be made with Powder coated Aluminium Natural colour matt finish Aluminium Hollow section of size 31mm x 40mm x 1.55mm. The Vertical center Mullion made with Aluminium Hollow section of size 55mm x 11mm x 1.55mm.The Horizontal and Vertical Aluminium Hollow section Shutter frame of size 31mmx13mm with a thickness of 1.55mm. The Mid Horizontal Aluminium Hollow section frame provided in the shutter with a size of 10mm x 11mm x 1.55mm. The Epoxy coated Stainless Steel 304 grade wire mesh with dia of 0.19mm shall be provided for Net. The U shaped Aluminium handle provided in the each shutter with a size of 19mm x 26mm. The Connection Mechanism between Shutter and Outer frame that enables opening the Mosquito net. The Mosquito net arrangement should be fixed to the window with 100% packing with Screws, Silicon packing all around the frames with including cost of all materials, labours, power consumption required for fabrication, drilling holes in RCC column/wall, masonry walls, Window frames, wherever necessary with drills to the required extent and make good to the original conditions after fixing and also as directed. All the Aluminium sections are to the powder coated with matt finish under electrically controlled conditions in accordance with relevant IS Code etc.complete complying with standard specification and as directed by the departmental officers. |
| 4 | Fabricating, Supplying and fixing in position Mosquito net arrangements of Sliding type. The Outer Sliding frame shall be made with Powder coated Aluminium Natural colour matt finish Aluminium Hollow section of size 40mmx38mmx1.55mm. The Horizontal and Vertical Aluminium Hollow section Slidingtrack shutter frame of size 20mm x 44mm x 1.55mm. The Mid Horizontal Aluminium Hollow section frame provided in the sliding track shutter with a size of 10mmx11mmx1.55mm. The Epoxy coated Stainless Steel 304 grade wire mesh with dia of 0.19mm shall be provided for Net. The Mosquito net arrangement should be fixed to the window with 100% packing with Screws, Silicon packing all around the frames with including cost of all materials, labours, power consumption required for fabrication, drilling holes in RCC column/wall, masonry walls, Window frames, wherever necessary with drills to the required extent and make good to the original conditions after fixing and also as directed. All the Aluminium sectionsare to the powder coated with matt finish under electrically controlled conditions in accordance with relevant IS Code etc. complete complying with standard specification and as directed by the departmental officers. |
| 5 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete |
| 6 | Earth work excavation for foundation by manual means for RR/Brick and Other step type footings for Load bearing structures in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2.00mts. and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers. |
| 7 | PLAIN CEMENT CONCRETE 1:5:10 (One cement, five M - sand and ten aggregate) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 8 | Cement Concrete 1:2:4 (One Cement, Two crushed stone sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including Super Plasticiser, mixing charges for machine mix , laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers - machine mix |
| 9 | FOR FOUNDATION AND BASEMENT. |
| 10 | Supplying and fixing of Chain link fencing 50 X 50mm 10gauge with steel frames of L angle of 50 X 50 X 6mm in vertical post @1.80m inteval and horizontal stiffners on 25 X 6mm plate @ 1m interval etc., including cost of Chain link and inclusive of loading, conveyance and unloading at site of work and labour charges for fixing in position etc.,complete complying with standard specification and as directed by the departmental officers. |
| 11 | Supplying and fixing of best and approved quality as per ISI make of PVC CHAIR (KIDS) with approved brand for Kids play area for an appropriate age groups of 2-6 years. The unit to be transported, loaded, unloaded and placed in position as place shown by the departmental officer etc., complete complying as directed by the departmental officers as per standard specification. (The materials, design and colours should be got approved by the Executive Engineer before use on work). |
| 12 | Supplying and installing of best and approved quality as per ISI make of INDOOR LEARNING TOYS for children's activity and learning centres as per requirement as on below with approved brand for Kids play area for an appropriate age groups of 2-6 years. The unit to be transported, loaded, unloaded and placed in position as place shown by the departmental officer etc., complete complying as directed by the departmental officers as per standard specification. (The materials, design and colours should be got approved by the Executive Engineer before use on work). |
| 13 | HEXA BLOCKS FUN TO BUILD IMAGINE AND CREATE 250 PICES - EKTA |
| 14 | 000251 HAMMER BALL HIT THE BALL - PARAMOUNT TOYS. |
| 15 | AL - 3B NUMBER TRAY 1 - 10 WITH KNOW. |
| 16 | AL - 41 C ALPHABET PARING SET SMALL. |
| 17 | SC - 26 RAISED SHAPE TRAY. |
| 18 | CE - 268 STACKING RING. |
| 19 | BOWLING MANIA BIG 10+2 PINS AND BALLS - NIMI. |
| 20 | GIGGLES MY FIRST ABACUS 9924500 - FUNSKOOL. |
| 21 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
TodayOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender