Tender For Nctps-Ii - Civil Maintenance Circle - Civil Maintenance Division - Replacing The Damaged False Ceiling For Aees/Aes Purchase Wing Room At Service Building Ground Floor
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Oct 2026
12 days left
EMD
7000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Nctps-Ii - Civil Maintenance Circle - Civil Maintenance Division - Replacing The Damaged False Ceiling For Aees/Aes Purchase Wing Room At Service Building Ground Floor
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the existing False Ceiling and devaluated to store including the cost of labour, lead, lift, T & P, etc., complete and as directed by the Engineer incharge of the work. |
| 2 | Providing, fixing in position of 8mm thick Calcium Silicate perforated Board Designed and size 600mm x 600mm with aluminium tee and angle section (Saint cobain) and supporting the false ceiling using 6mm MS rods/G.I wire with required with hold fast at 0.60m intervals. The rates including cost of all materials, labour, lead, lift, T&P, etc., complete and as directed by the site Engineer incharge of the work. |
| 3 | Providing False Ceiling using 8mm thick Calcium Silicate perforated Board of size 600mm x 600mm including the cost of all materials, labour, lead, lift, T & P, etc., complete and as directed by the Engineer incharge of the work |
| 4 | Providing and fixing of European Water Closet with \\"P\\" or \\"S\\" Trap with Double Flapped Seat and Seat Cover with Brass Hinges and 12.50 litre capacity PVC low Level Flusing Tank with all internal fittings including cost of all materials, labour, lead, lift etc., complete |
| 5 | Providing and fixing white wash basin of size 550x400mm with all accessories such as cast iron brackets, 32mm dia C.P waste coupling, rubber plug and chain, 32mm dia 'B' class G.I.waste pipe, 15mm dia G.I.wheel valve, 15mm dia nylon connection, 15mm dia brass nipples, 15mm G.P.Piller tap, cost of all materials, labour, lead, lift etc., complete. |
| 6 | Providing & fixing in position of 20mm dia UPVC pipes (Schedule-80) of Ashirvad or equivalent quality with ISI monogram for water line including cost of pipe, labour, lead, lift, etc., complete and as directed by site Engineer incharge of the work. |
| 7 | Providing and fixing of 20mm dia UPVC Specials including cost of materials, labour, lead, lift, etc., complete and as directed by site Engineer incharge of the work. |
| 8 | 20mm UPVC Coupling |
| 9 | 20mm UPVC Elbow |
| 10 | 20mm dia UPVC TEE |
| 11 | 20mm dia UPVC Ball valve |
| 12 | Providing & fixing in position of 75mm dia (6 kg. per cm2) PVC pipes of Finolex or equivalent quality with ISI monogram for drain pipe including cost of all materials, labour, lead, lift, etc., complete. |
| 13 | Providing and fixing of PVC Specials including cost of materials, labour, lead, lift, etc., complete as directed by the Engineer in charge at site. |
| 14 | PVC 75mm coupling |
| 15 | PVC 75mm Elbow |
| 16 | PVC 110 X 75 floor trap |
| 17 | Brick work in CM 1:5 using Fly ash brick including cost of all materials, T&P, lead, lift etc., complete and as directed by Engineer in charge at site. |
| 18 | Plastering with CM 1:5, 12mm thick including cost of all materials, T&P, lead, lift, curing etc., complete and as directed by Engineer incharge at site. |
| 19 | Providing and fixing powder coated anodized aluminium partition works using 100 x 45 x 2mm aluminium sections as frame and top and bottom panels with 9mm thk prelaminated particle board (Novapan sheet) panel fixed by using aluminum beadings and rubber lining with standard hardwares including cost of all materials, labour charges, all leads, lifts etc., complete and as directed by the Engineer incharge of the work. |
| 20 | Providing and fixing in position powder coated anodized aluminium single leaf door using aluminium box section of size 45 x 45 x 2 mm for top, middle and sides, 100 x 45 x 2mm for bottom, fully panelled with 9mm prelaminated board (Novapan or equivalent) and lock, 'D' type handles on both sides, hinges at top and bottom, door stopper, door closure etc., including the cost of all materials, labour, lead, lift, T & P, etc., complete and as directed by Engineer incharge at site. |
| 21 | Colour washing with two coats of interior emulsion paint over old plastered surface including the cost of scrapping, all materials, lead, lift, labour, T&P etc, complete and as directed by the Engineer Incharge of the work |
| 22 | Providing and fixing of Roll of honour board at CE office room including the cost of Cutting sticker, ACP sheet, lead, lift, labour, T&P etc, complete and as directed by the Engineer Incharge of the work. |
| 23 | Providing Teakwood of size 3' x 1.5', for CE office including cost of all materials, labour lead, lift, T&P etc., complete and as directed by the Engineer incharge of the work. |
| 24 | Providing two legged scaffolding using 10 to 13 cm dia casuarina props, distance between two rows being 1.25m and spacing of posts being 2m in both rows, with two horizontal posts with 0.50m overlap on either side and braces at 2m c/c including logitudinal and transverse middle braces to step up and providing a platform with C.W.Planks of 40mm thick and 1m width etc., complete using coir and nails for pipeline work including cost of all materials, labour, lead, lift, etc., complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender