Tender For Maintenance Of Internal Electrification Works Within The Premises Of Office Of The Superintending Engineer Second Circle, Executive Engineer Division -Iii , Mechanical Division,Estate Office At Pwd Complex, Netaji Chowmuhani, Agartala, Wes
Tender Value
11.96 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
0 days left
EMD
23936
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Internal Electrification Works Within The Premises Of Office Of The Superintending Engineer Second Circle, Executive Engineer Division -Iii , Mechanical Division,Estate Office At Pwd Complex, Netaji Chowmuhani, Agartala, West Tripura.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type switch, cover plate, surface modular switch board including connection etc as required:- |
| 2 | Short Point :- |
| 3 | Medium Point :- |
| 4 | Long Point :- |
| 5 | Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modular switch board, earthing the 3rd pin etc. as required:- |
| 6 | Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2x2.5 sq. mm PVC insulated Copper conductor cable(FR) on surface modular switch board, earthing the 3rd pin etc. as required:- |
| 7 | Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required. |
| 8 | 2 X 1.5 sq mm |
| 9 | 2 X 2.5 sq mm |
| 10 | 2 X 4 sq mm |
| 11 | 4 X 6 sq mm |
| 12 | 4 X 10 sq mm |
| 13 | 4 X 25 sq mm |
| 14 | 4 X 35 sq mm |
| 15 | Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/surface including connection etc. as required:- |
| 16 | 1 X 1.5 sq mm |
| 17 | 1 X 2.5 sq mm |
| 18 | 1 X 4 sq mm |
| 19 | 1 X 16 sq mm |
| 20 | 4 X 50 sq mm |
| 21 | Supplying and fixing of the following sizes PVC conduit (medium gauge) on surface with all accessories etc. as required. |
| 22 | 19/20 mm dia |
| 23 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. |
| 24 | 1-2 module plastic switch board:- |
| 25 | Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required. |
| 26 | 1-2 module :- |
| 27 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required. |
| 28 | 2.5 mfd fan capacitor |
| 29 | Buzzer Call bell |
| 30 | Ding dong call bell |
| 31 | Musical call bell |
| 32 | 5 amps power top:- |
| 33 | 15 amps power top:- |
| 34 | 32 amps DP kit kat switch:- |
| 35 | Electronic 4 step mini fan regulator |
| 36 | Angle/batten holder |
| 37 | 5/6 amps piano type call bell push |
| 38 | Ceiling rose |
| 39 | Supplying and fixing of the following modular accessories including necessary connection etc. as required. |
| 40 | 3 pin 6/10 amps socket outlet (2M):- |
| 41 | 3/6 pin 16/20 amps socket outlet (2M):- |
| 42 | 4 step fan regulator (1M):- |
| 43 | Blank plate (1M):- |
| 44 | 20/25 amps single phase motor starter switch (2M):- |
| 45 | Bell push SP (1M) :- |
| 46 | RJ11 telephone socket outlet (1M):- |
| 47 | RJ45 LAN socket outlet (1M):- |
| 48 | Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12\\"x 12\\" having locking arrangement including CC work, holes on earth pipe etc. as required. |
| 49 | `Extra for using salt (5 kg) and charcoal (46kg) for pipe earth electrode as required. |
| 50 | Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required. |
| 51 | Supply and fixing of 25mm x 5mm GI strip on wall/ floor of the building for horizontal/ vertical run including necessary spacers and porcelain insulators at regular intervals. |
| 52 | Supplying & fixing of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR) (ISI marked, BEE 1 star/minimum service value 4.0 m3/min/W) : - |
| 53 | Supplying & installation of 400 mm sweep AC padestal fan with metal blade including connection etc as required:- |
| 54 | Supplying & installation of 400 mm sweep AC wall mounting fan with metal blade including connection etc as required:- |
| 55 | Supplying & installation of 225/230 mm sweep metalic body exhaust fan including connection etc as required:- |
| 56 | Supplying & installation of 450 mm sweep wall mounting air circulator including connection etc as required:- |
| 57 | Supplying & installation of 300 mm sweep 900 rpm metalic body exhaust fan including connection etc as required (ISI marked) :- |
| 58 | Supplying & installation of shutter for 225/230/300 mm sweep metalic body exhaust fan in the existing hole as required:- |
| 59 | Dismantling the existing ceiling fan and making winding by (34/35/36 S.W.G) Copper wire, varnish, oiling, greasing and re-fixing the same including wiring the down rod of standard length ( up to 30 cm ) etc. as required :- |
| 60 | Supplying and fixing of 20 mm dia extra down rod (GI Pipe Medium Guage) with necessary hole for installation of ceiling fan as required. |
| 61 | Making different sizes of hole in the wall for fixing of exhaust fan including finishing the same with cement plastering and painting etc as required: |
| 62 | Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):- |
| 63 | Surface mounted integrated 20 watt LED batten with polycarbonate diffuser:- |
| 64 | Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:- |
| 65 | 12 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :- |
| 66 | Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required. |
| 67 | 2 way SPN MCB DB (single door):- |
| 68 | 4 way SPN MCB DB (double door):- |
| 69 | 4 way horizontal TPN MCB DB (Double door):- |
| 70 | 6 way horizontal TPN MCB DB (Double door):- |
| 71 | (2+6) / 8 way SPN MCB DB (double door):- |
| 72 | (2+10) / 12 way SPN MCB DB (double door):- |
| 73 | Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required:- |
| 74 | 6 to 32 amps SP MCB:- |
| 75 | 6 to 32 amps DP MCB:- |
| 76 | Supplying & installation of isolators of following ratings in the existing MCB DB including connection etc as required:- |
| 77 | 40 amps DP isolator:- |
| 78 | 40 amps FP isolator:- |
| 79 | Supplying and fixing of Copper terminal ends (LUGS) - long barrel of following sizes: - |
| 80 | 4 sq mm |
| 81 | 6 sq mm |
| 82 | 10 sq mm |
| 83 | 25 sq mm |
| 84 | 35 sq mm |
| 85 | 50 sq mm |
| 86 | Supplying and installation of powder coated steel sheet enclosure for 415 volts MCCB (TP/FP) complete with necessary connection etc as required:- |
| 87 | Enclosure suitable for MCCB upto 100 amps:- |
| 88 | Enclosure suitable for MCCB above 100 amps upto 250amps:- |
| 89 | Supplying & installation of TP/FP MCCB of following ratings in the existing MCCB enclosure/ panel board including connection etc as required (Ics=100% of Icu with adjustable settings):- |
| 90 | 16 to 100 amps FP MCCB, Breaking capacity 16/18KA (Thermal Magnetic):- |
| 91 | 200 amps FP MCCB, Breaking capacity 25KA (Thermal Magnetic):- |
| 92 | Supplying and installation of fuse unit kitkat/HRC/HBC of the following ratings in existing main switch/panel board including necessary connection etc as required:- |
| 93 | 200/250 amps kitkat porcelain fuse unit with base(rewireable):- |
| 94 | Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required:- |
| 95 | 200 amps 415 volts four strip Copper busbar chamber 6 ways of size (610mmx410mmx120mm):- |
| 96 | Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mmx25mmx5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc as required:- |
| 97 | Cleaning of existing ceiling fan/luminaries. |
| 98 | Supplying, installation, testing and commissioning of following ratings online UPS with inbuilt isolation transformer, 50/60Hz (Auto sensing) frequency, P.F range 0.95-0.99, voltage regulation +/-1%, Pure sine wave form, total harmonic distortion < 5% with full load, Noise level 50db at 1m, LED indication for Normal mode/Load on battery/Load on bypass/System fault, Audible alarm for Mains failure, low battery, Overload, fault and Bypass mode complete with M. S Rack for mounting battery bank, Battery inter link cables and all other necessary accessories including connections etc. as required:- |
| 99 | 2 kVA, 1 Ph input/1 Ph output Online UPS with 7200 VAH battery bank for minimum 2 hours Backup:- |
| 100 | Supplying and fixing of the following sizes wooden switch boards with 3mm thick bakelite cover etc. as required. |
| 101 | 102mm x 102mm (4\\" X 4\\") :- |
| 102 | 102mm x 178mm (4\\" X 7\\") :- |
| 103 | 254mm x 300mm (10\\" X 12\\") :- |
| 104 | Dismantling charges of old materials handed over to the concerned authority including ceiling fan, regulator, TL fittings, cables & other wiring materials etc. as per direction of the site engineer-in-charge L.S. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender