Tender For Providing Of Miscellaneous B/R Works At Echs Polyclinic At Mil Stn Pithoragarh Under Ge(Mes) Pithoragarh
Tender Value
33.17 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
5 days left
EMD
66340
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pithoragarh → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Miscellaneous B/R Works At Echs Polyclinic At Mil Stn Pithoragarh Under Ge(Mes) Pithoragarh
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Surface excavation n exc 30 cm deep and averaging 15 cm and getting out in any type of soil complete all as specified. |
| 3 | Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in any type of soil, complete all as specified and directed by Engineer-In- Charge. |
| 4 | Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in any type of soil complete all as specified and directed by Engineer-In- Charge. |
| 5 | Removing excavated material exceeding 250M but not exc 500m and depositing where directed. Complete all as specified and directed by Engineer-In- Charge. |
| 6 | M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed by Engr-In- Charge. |
| 7 | M/L PCC 1:3:6 type C2 ( using 40 mm thick graded stone aggragate) as in surface channel drain. Complete all as specified and directed |
| 8 | M&L for brick work with old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed. |
| 9 | M&L for 15mm thick rendering in cement mortar 1:6 to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and fair without using extra cement complete all as specified and directed. |
| 10 | M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM 1:4 finished even and fair. Complete all as specified and directed. |
| 11 | M&L for preparing new plastered surfaces of walls and applying two coats of Oil bound distemper on walls over a coat of primer, complete all as specified. |
| 12 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. Complete all as specified and directed. |
| 13 | M&L for hardcore broken stone boulders broken to guage n exec 63 mm all as spd and directed |
| 14 | M&L for 75 mm th PCC D 2, 1:4:8 using 40mm graded aggregateas in floor sub base |
| 15 | M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in floors, to receive surface of tile complete all as specified and directed. |
| 16 | M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match the shade, complete all as specified and directed |
| 17 | M & L, Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match ,complete all as specified and directed. |
| 18 | M & L 16 to 18 mm thick granite (colour as approved by GE) stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform/dado/skirting /platform counter top WHB including cutting holes for oval shape /urinal partitions, door/window cills etc. including 20 mm thick cement screed bed 1:6 CM in horizontal or vertical surfaces including grinding the edges half round and polishing complete all as specified and directed by Engineer-In- Charge. |
| 19 | M&L 75mm thick PCC 1:3:6 type C-2, (20 mm graded stone aggregate)as plinth protection/ hardstanding and finishing even and smooth without using extra cement incl making joints 12 mm wide of full depth of PCC at every 3 meters and at every change in direction and filling the same with sealing compund grade 'A' incl necessary formwork. Complete all as specified and directed. |
| 20 | S&F 9 mm thick Plywood, grade BWP, type BB fixed with screws/ fasteners to timber frame work, complete all as specified and directed. |
| 21 | S&F cold rolled lead sheet thickness 2mm for x ray protection (lead equivalence 2mm pb) on walls and doors (over ply wood framework) inclusive of necessary adhesive, nails, fasteners, etc. as per specified and directed by Engr-In-charge. |
| 22 | S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing,complete all as specified and directed. |
| 23 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 24 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 25 | M & L 595 mm x 595 mm false ceiling system , using hot dipped galvanised steel section exposed surface with precoated capping, GI tee (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) and cross tee of size 24 x 32 mm & 24 x 27 mm having 0.27 mm gauge at every 600 mm c/c interval and wall angle of size 19 x 19 mm having 0.35 mm gauge fixed to the wall. The above grid is to be suspended at every 1200 mm c/c in both direction using 2mm thick pre-straightened GI wire laying designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS 14862) of size 595 x 595 mm , back of the tile duly sanded and finished with a coat of protective paint over the formed grid etc , complete all as specified and directed. |
| 26 | S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 27 | S&F in door closer (aluminium extruded body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed |
| 28 | S&F powder coated anodised aluminium window (three track) and ventilator shutters (powder coating of any colour, thickness or powder coating not less than 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified. |
| 29 | S&F coloured Aluminium Composite Panels (ACP) of Exterior grade for wall cladding and main gates including necessary sealing. The composite panel should consist of 3.5mm thermoplastic core of LDPE sandwiched between 2 skins of 0.25mm thick aluminium sheet (alloy designation 310S) making a total panel thickness of 4mm, the sheet shall be fixed using GI brackets/stainless steel bolts and nuts/ screws etc complete with spring washers and cap nuts and all other necessary accessories all hardware shall corrosion resistant frame out of anodised aluminium member.Complete all as specified and directed |
| 30 | S&F Stainless steel letters of size not less than 12 inch of grade SS 202, incl necessary SS screws etc complete fixed to ACP board .Complete all as specified and directed. Note; Each letter shall be measured as one unit for payment purpose. |
| 31 | S&F PVC boards 18 mm thick any colour as in cabinets incl shelves ,shutters and framework, fixed with screws and adhessive as per direction of Engr-in-Charge and manufacturer's instructions including piano hinges, magnet catcher, handles etc. |
| 32 | S&F for mild steel window grills , framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing, stair case railings, monkey cages, and similar work including welding, FE-290 grade E-165 complete all as specfied and directed. |
| 33 | S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. 0.5 sqm each pane .complete all as specified and directed. |
| 34 | S&F 4 mm thick Figured glass, pin head type and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. 0.5 sqm in each pane complete all as specified and directed. |
| 35 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed |
| 36 | S&F Aluminium annodised barrel tower bolt of extruded section and fixed 200 mm size with bright bolt complete all as specified and directed. |
| 37 | S&F extruded Aluminium alloy handle fabricated annodised 150 mm size, complete all as specified and as directed . |
| 38 | S & F stainless steel glossy finish hat peg set of five tier with necessary fitting complete all as specified and directed. |
| 39 | S&F 1000 litre capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position. complete all as specified and directed. |
| 40 | S&F 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed |
| 41 | S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed ,complete all as specified and as directed |
| 42 | M & L for cutting chases, pinning in brick/PCC blocks wall in making good to facings where required and pointing in cement mortar 1:3 and cutting chases for concealed water tubing etc and making good complete all as specified and as directed |
| 43 | Supplying and laying of CPVC pipes (outer dia 20 mm) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 44 | Supplying and laying of CPVC pipes (outer dia 25 mm) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 45 | S&F CPVC brass elbow for CPVC pipe size 20 mm |
| 46 | S&F bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed. |
| 47 | S&F stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed |
| 48 | S&F Bevelled edge mirror 5.5 mm thick (frame less of selected quality) fixed with appropriate number of SS studs etc complete all as specified and as directed |
| 49 | S&F Stainless steel tubular towel ring complete all as specified and as directed |
| 50 | S&F PVC connection of 45 cm length including brass nuts complete all as specified and as directed |
| 51 | S&F fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed. |
| 52 | S&F fancy type corner shelf assembly 300mm radius three tiers fixed with fancy type screws complete all as specified and directed. |
| 53 | S & F vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover and flushing pipe complete all as specified & directed. |
| 54 | S&F PVC valveless, syphonic action type, flushing cistern(10 ltr capacity) low level, white, with inlet, ball valve, float and handle including brackets |
| 55 | S&F vitreous chinaware coloured wash hand basin with pedestal of size 55X40 cm complete including fancy CP pillar tap, CP brass waste coupling ,waste pipe including fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed. |
| 56 | S&F half stall Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and waste pipe; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) all as spd and directed |
| 57 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) all as spd and directed |
| 58 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect. Complete all as specified and directed. |
| 59 | S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed |
| 60 | S&F 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed. |
| 61 | S&F 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and vertical surfaces complete all as specified and directed. |
| 62 | S&F 75mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed. |
| 63 | S&F 75mm bore PVC(SWR) Reducer, TEE, Y, etc complete all as specified and directed. |
| 64 | S&F 110mm bore PVC(SWR) bends any radius, complete all as specified and directed. |
| 65 | S&F 110mm bore PVC(SWR) Reducer, TEE, Y, etc complete all as specified and directed. |
| 66 | S&F 75mm bore PVC(SWR) vent cowl complete all as specified and directed. |
| 67 | S&F MS joist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section MS tubes, flats square bars etc fixed indepently or framed or without connecting plates ,trusses etc any type framing including purlins and rafters etc confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed by Engr-in-Charge |
| 68 | S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge |
| 69 | S & F pre-painted galvalume aluminium zinc coating GI based plain steel 0.50 mm thick for ridge cover of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge |
| 70 | S&F mild steel angles, tees, flats, C section, MS square bars, MS Tubes etc as in steel gates, steel posts and struts in fencing, grills,railling etc including embedding in concrete and screwing etc. including cut to shape as directed, drilling holes, notching for wire etc including all necessary drilling, bolting, welding or riveting and similar work conforming to FE-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge. |
| 71 | M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 72 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 73 | M&L RCC (Nominal mix) 1:1.5:3 ( 20 mm graded aggregate) as in Columns, pillars, piers, posts, beams, isolated footings .lintel, cantiliver slab etc. |
| 74 | M&L Formwork (square rough finished surface of concrete) to sides of pillars, posts, struts, piers, columns , beams, footings, sides and soffits of suspended/cantiliver slab etc. |
| 75 | M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete incl welding etc (if reqd) all as specified and directed. |
| 76 | Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders |
| 77 | S&F Heavy duty outdoor tiles of size not exceeding 0.36 sqm, 10-12 mm thick set and jointed in neat cement slurry over and incl 20 mm thick cement screed bed in CM 1:4 . complete all as specified and as directed. |
| 78 | M&L for stone masonry walling of random rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:4 |
| 79 | M & L for providing precast cement concrete bonders (for stone walling) type B1 (1:2:4) using 20 mm graded stone aggregate, set in cm 1:4 complete all as specified and directed. |
| 80 | Hand packing (any thickness) at back of walls with broken stone or boulders and raising (or lowering) to the required level complete all as specified and directed. |
| 81 | S&F 75mm bore PVC(SWR) pipes single socketed for weep holes , in any length ,as in weep holes complete all as specified and directed. |
| 82 | Extra over stone walling for hammer dressing with maximum depression on face form straight edge held against the surface n.exc 40mm in lime or sand stone dressing to face stone and dressing of face beds and joints of random rubble walling complete all as specified and directed. |
| 83 | Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:3 |
| 84 | M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping including weathering, throating and necessary form work complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender