Tender For Provision Of Certain Sanctioned Works At Afs Amla
Tender Value
10.50 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
12 days left
EMD
21000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Betul → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Certain Sanctioned Works At Afs Amla
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Solid PVC Wall Lining consisting of 5mm thick Plain Colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. |
| 2 | Dismantling of wall, display board/ceiling board fibre, pulb , insulation ets or insulation board/slab/wool of any thickness cover fillets complete all as specified and directed. |
| 3 | S&F for suspended false ceiling using E-grid 2430, 180 GSM (concealed ceiling suspension system) of grid size 600mmx600mm with main runner 38mmx24mm and wall angle 24mmx24mm using 6mm thick high pressure non asbestos fiber cement decorative board with premium look (E-Board classic) in a grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purline from roof with adjustment clip providing positions for light fixtures, air conditioning diffusers and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger@ 1220mm maximum c/c. The last hanger at the end of each main runner should not be interlocked between main runner@ 610mm c/c, s to form 600mmx600mm grid complete all as specified and directed. |
| 4 | Material and labour for Granite 18 to 20 mm thick table rubbed & polished in steps, jambs, cills, shelves etc including cutting of holes for fixing WHB in cement mortar 1:4 & pointing with white cement with marble dust using admixiure of pigment to match with the shade of granite over and including 15mm thick screed in CM 1:3 complete all as specified and as directed . |
| 5 | Taking down wooden chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 6 | M&L for 12mm thick toughned glass as in hinged door, partitions automatic doors and similar work including cutting to shape, drilling holes required necessary etching etc complete all as specified and directed. |
| 7 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 8 | S&F stainless steel with premium soft look 450mm door handle 'H' type made with heavy duty stainless steel door fixed properly complete all as specified and directed. |
| 9 | S&F glass door lock wall to glass stainless steel finish size 123mmx68mm with three keys sets complete all as specified and directed. |
| 10 | Taking down chowkats or frames with shutters any type exceeding 1.5 Sqm but n exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 11 | S&F in Repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed. |
| 12 | S&F in repairs Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and is·1285, fixing with dash fasteners of required dia and size. including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, traight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C P. brass/ stainless steel screws complete all as specified and directed. |
| 13 | S&F in repairs Powder coated Anodised aluminium grill (Dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed. |
| 14 | S&F 4.80/5.00mm thick sheet glass selected quality and glazing in squares not exceeding 0.50 sqm in each pane of aluminium door I window complete all as specified and directed. |
| 15 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 16 | M&L for PCC 1.4:8 type D2 (using 40mm graded stone aggregate) as in sub base 75mm thick, finished fair & even complete all as specified and directed. |
| 17 | M&L for yellow/ Red colour pre-polished rubber moulded chequred cement concrete tile 300mm x 300mrn x 20-22mm thick with anti skid properties set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 18 | M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed. |
| 19 | Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender