Tender For Repair/Renewal Of Furniture Under Ge (I) R&D Chandigarh
Tender Value
20 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
19 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair/Renewal Of Furniture Under Ge (I) R&D Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | Repair to Almirah Large steel with shelves |
| 2 | Denting chipped surfaces and preparing the surfaces/ground almirah large with putty and applying two coat of Ist quality synthetic enamel paint internally by spray painting OG/Silver colour complete all as specified and directed. |
| 3 | All as per item No. 1.1 above but externally -ditto-. |
| 4 | Replacement & fixing handle MS CP of standard size complete all as specified and directed. |
| 5 | Replacement & fixing of locking device plate and rod etc complete all as specified and directed. |
| 6 | All as per item No. 1.4 above but hinges MS of standard size. |
| 7 | All as per item No. 1.4 above but locks MS body & brass 4 levers. Make : Godrej /ISI marked. |
| 8 | Replacement of unserviceable shelf of Almirah large with new shelf made out of MS sheet 1mm thick and duly painted with 2 coats of synthetic enamel paint over a coat of red oxide primer and fixing complete all as specified and directed. |
| 9 | Replacement of unserviceable leg complete with new leg made out of MS sheet 1mm thick duly welded and painted with 2 coats of Ist quality synthetic enamel paint over a coat of red oxide primer and fixing complete all as specified and directed. |
| 10 | All as per item No. 1.8 here in before but clamps MS with bolt & nuts for fixing shelf & hinges complete all as specified and directed. |
| 11 | Repair to Almirah Medium Steel/locker steel with shelves |
| 12 | Denting chipped surfaces and preparing the surfaces/ground with putty and applying two coat of Ist quality synthetic enamel paint internally by spray painting OG Silver colour colour complete all as specified and directed. |
| 13 | All as per item No. 2.1 here in before but externally. |
| 14 | Replacement & fixing handle MS CP of standard size complete all as specified and directed. |
| 15 | Replacement & fixing of locking device plate and Rod etc complete all as specified and directed. |
| 16 | All as per item No. 2.4 above but hinges MS of standard size. |
| 17 | All as per item No. 2.4 above but locks MS body & brass ISI marked 4 levers. Make : Godrej/ISI marked. |
| 18 | Replacement of unserviceable shelf of Almirah large with new shelf made out of MS sheet 1mm thick and duly painted with 2 coats of synthetic enamel paint over a coat of red oxide primer and fixing complete all as specified and directed. |
| 19 | Replacement of unserviceable leg complete with new leg made out of MS sheet 1mm thick duly welded and painted with 2 coats of Ist quality synthetic enamel paint over a coat of red oxide primer and fixing complete all as specified and directed. |
| 20 | Repair to Chair CB Steel tubular without arms |
| 21 | Material and labour for painting with synthetic enamel OG colour paint on steel/iron surfaces of chair after preparation of surfaces with sand paper complete all as specified and directed. |
| 22 | Replacement of seat made out of 1st class hard wood sheesham duly woven with 2mm wide cane plastic white/cream colour half round in Godrej Pattern and frame duly painted with two coats of synthetic enamel black paint over a coat of primer and fixed with bolts, nuts and washers of suitable size complete all as specified and directed. |
| 23 | All as per Srl item No. 3.2 above but back of chair CB steel without Arm. |
| 24 | Replacement and fixing of hard rubber / PVC shoes set of 04 Nos to bottom frame of chair with suitable screws complete all as specified and directed. |
| 25 | All as per Srl item No. 3.4 above but caps set of two Nos. to open ends of MS Tube frame at top of chair. |
| 26 | Replacement of broken unserviceable existing MS flat with new MS flat to seat/back of chair complete all as specified and directed. |
| 27 | Repair to working table laminated top off sizes. |
| 28 | Cleaning the surfaces with sand paper and french polishing to all surfaces exposed to directed view complete all as specified and directed. |
| 29 | Fixing of new stiffeners made out of hardwood Shesham wood 1st class complete all as specified and directed. |
| 30 | Replacement of leg and fixing of new leg made out of hardwood Shisham wood 1st class complete all as specified and directed. |
| 31 | Replacement and fixing of top of prelaminated particle board 18mm thick fixed with around 4mm teakwood beading duly polished complete all as specified and directed. |
| 32 | Repair to chair adjustable 600 x 560 x 840mm cushioned seat and back tubular frame round tube cantilever. |
| 33 | Replacement and fixing of seat or back cushioned as earlier provided on chair complete all as specified and directed. |
| 34 | Repair to table of sizes 900 x 600 x 760 mm with/ without drawer and table dining 1500 x 900 x 760mm |
| 35 | Cleaning the surfaces with sand paper and french polishing to all surfaces exposed to directed view complete all as specified and directed. |
| 36 | Replacement of legs and fixing of new leg made out of hardwood sheesham wood 1st class complete all as specified and directed. |
| 37 | Replacement and fixing of top of prelaminated particle board 18mm thick including wooden beading around the top for table dining of size 1500 x 900 x 760 mm complete all as specified and directed. |
| 38 | All as per item No. 6.3 above but size of table 900 x 600 x 760mm. |
| 39 | Repair to Bed Ply top |
| 40 | Dismantling carefully unserviceable leg of bed and supply and fixing of best quality hardwood sheesham wood leg including French polishing complete all as specified and directed. |
| 41 | Dismantling unserviceable long rail and supply and fixing of 2nd class chir wood long rail complete all as specified and as directed. |
| 42 | All as per item No. 7.2 here in before but short rail ---ditto-- |
| 43 | Dismantling unserviceable head rest and supply and fixing new head rest made out of 4mm thick ply wood one side teak faced duly polished after replacing the inner frame of head rest using 1st class deoder wood complete all as specified and directed. |
| 44 | All as per item No. 7.4 here in before but foot rest ---ditto-- |
| 45 | Removing existing damaged/unserviceable plywood 12mm thick from GI Charpoy and supply and fix new 12mm thick plywood BWR grade (approved make)of size 2100mmx900mm fixed complete all as specified and directed. |
| 46 | Cleaning the surfaces with sand paper and french polish to all wooden surfaces exposed to direct version complete all as specified and directed. |
| 47 | Repair to Table officer steel. |
| 48 | Material and labour for spray painting with synthetic enamelled paint OG colour on all steel surfaces of table after preparation of surfaces with sand paper complete all as specified and directed. |
| 49 | Dismantling of old worn out top and fixing of 18mm thick prelaminated particle board interior grade as shown on drg including 4 mm thick teak wood edging all-round to the top, including minor welding work complete all as specified and directed. |
| 50 | Replacement of old lock steel and fixing complete all as specified and directed. Make:-Godrej/equivalent. |
| 51 | Replacement of drawer as per existing size and thickness fixing complete all as specified and directed. |
| 52 | Repair to table office clerk steel & table office Asst and table writing off sizes |
| 53 | Material and labour for spray painting with synthetic enamelled paint OG colour on all steel surfaces of table after preparation of surfaces with sand paper complete all as specified and directed. |
| 54 | Dismantling of old worn out top and fixing of 18mm thick prelaminated particle board interior grade as shown on drg including 4 mm thick teak wood edging all-round to the top, including minor welding work complete all as specified and directed. |
| 55 | Replacement of old lock steel Harrison and fixing complete all as specified and directed. Make:- Godrej/ISI marked. |
| 56 | Taking out drawers of table office clerk & table writing replacement of drawer and fixing complete all as specified and directed. |
| 57 | Repair/Re-canning & painting of chair verandah/chair folding steel |
| 58 | All as per item No. 9.1 here-in-before but for chair verandah/chair folding steel and painting with synthetic enameld paint white/green finish complete all as specified and as directed.. |
| 59 | Material and labour for removing of old woven out cane plastic of chair varandah scraping smoothing the steel frame and re-painting with two coat of white paint and recaning with white plastic cane 4 mm thick half round make: Ajoy premier complete all as specified and directed. Weight of plastic cane should not be less than 450 gms per chair rubber shoes and fixing the same on legs of chair Verandah. |
| 60 | Repair to chair CBA steel tubular with arm. |
| 61 | Replacement of unserviceable seat with a new seat made out of 1st class hard wood sheesham duly woven with 2mm wide half round cane plastic white/cream colour in Godrej pattern and frame painted with 2 coats of synthetic enamelled Black Paint and fixed with Bolts Nuts and washers of suitable sizes complete all as specified and directed. |
| 62 | All as per Srl item No. 11.1 above but for back of chair CBA steel tublar with arm. |
| 63 | Replacement of unserviceable hand rest and fixing new one made out of 1st class hard wood sheesham with suitable size of screws etc duly painted with synthetic enamelled black paint existing colour complete all as specified and directed. |
| 64 | Material and labour for painting with synthetic enamel OG colour paint on steel/iron surfaces of chair after preparation of surfaces with sand paper complete all as specified and directed. |
| 65 | Replacement and fixing of hard rubber / PVC shoes set of 04 Nos to bottom frame of chair with suitable screws complete all as specified and directed. |
| 66 | All as per Srl item No. 11.1 above but caps set of two Nos. to open ends of MS Tube frame at top of chair. |
| 67 | Replacement of broken unserviceable existing MS flat with new MS flat to seat/back of chair complete all as specified and directed. |
| 68 | Repair to chair revolving steel off sizes & chair cushioned with seat and back with arm |
| 69 | Taking out unserviceable seat of chair revolving up holstering the same with foam seat 75mm thick 0.32 density on 6 mm thick plywood commercial duly covered with tapestry cloth and labour for repair of revolving chair complete all as specified and directed . |
| 70 | All as per item No 12.1 but back of chair revolving foam cushion shall be provided 50mm thick 0.32 density complete all as specified and directed. |
| 71 | Replacement of unserviceable hydraulic system of revolving chair complete all as specified and directed . |
| 72 | Replacement of broken/unserviceable wheel of base of revolving chair complete all as specified and directed . |
| 73 | Replacement of broken/unserviceable base of revolving chair complete all as specified and directed . |
| 74 | Replacement of broken/unserviceable Arm rest, Left/Right, made of black integral skin polyurethane with 75-85 shore 'A' hardness and reinforced with MS insert, scratch and weather resistant, slope towards front, match with existing, suitable for Chair revolving including taking out old unserviceable arm rest complete all as specified and directed. |
| 75 | Replacement of broken/unserviceable push back plate of revolving chair complete all as specified and directed . |
| 76 | Repair to table office officer wooden and executive table off sizes |
| 77 | Dismantling of old worn out top and fixing of 18mm thick prelaminated particle board interior grade as shown on drawing including edging all round the top and minor repairs to drawers complete all as specified and directed. |
| 78 | Cleaning the surfaces with sand paper and french polish to all exposed surfaces to direct version except top laminated surfaces only complete all as specified and directed. |
| 79 | Replacement of old lock steel and fixing complete all as specified and directed. Make:-Harrison/Godrej. |
| 80 | Replacement of drawer and fixing as per existing size & thickness at site complete all as specified and directed. |
| 81 | Repair to table office clerk wooden/table writing & table office Asst off sizes |
| 82 | Dismantling of old worn out top and fixing of 18mm thick prelaminated particle board interior grade as shown on drawing including edging all round the top and minor repairs to drawers complete all as specified and directed. |
| 83 | All as per srl item No. 14.1 here in before but for table office clerk/table office asstt/table writing all wooden off size/off kind. |
| 84 | Replacement and fixing of unserviceable leg/stiffener of 1st class hard wood sheesham complete all as specified and directed. |
| 85 | Replacement of old lock steel Harrison and fixing complete all as specified and directed. Make:-Harrison/Godrej. |
| 86 | Replacement of drawer and fixing as per existing size and thickness at site complete all as specified and directed. |
| 87 | Repair to Chair CBA wooden/Chair Dining/Chair Easy/Chair writing/Chair office with arm wooden |
| 88 | Dismantling carefully unserviceable leg and one stiffeners and supply and fixing new leg and stiffener of hard wood/sheesham complete all as specified and directed. |
| 89 | All as per srl item No 15.1 above but for rails of chair CBA wooden/chair dining /Chair writing & chair office with arm. |
| 90 | Cleaning the surfaces with sand paper and french polish to all wooden surfaces exposed to direct version. |
| 91 | Recanning after removing old unsv cane of chairs with cane plastic 2 mm wide half round white colour of approved quality in Godrej pattern complete all as specified and directed. |
| 92 | Chair Easy |
| 93 | Dismantling carefully unserviceable leg and one stiffeners and supply and fixing new leg and stiffener of hard wood/sheesham complete all as specified and directed. |
| 94 | All as per srl item No 16.1 above but for rails of chair easy. |
| 95 | Cleaning the surfaces with sand paper and french polish to all wooden surfaces exposed to direct version. |
| 96 | Replacement and fixing of side frame of 1st class quality hard wood sheesham complete all as specified and directed. |
| 97 | Repair to chair visitors/chair executive/ chair cushioned steel with arm/without arm off sizes. |
| 98 | Taking out unserviceable seat & back of chair revolving up holstering the same with foam seat 75mm thick 0.32 density on 6 mm thick plywood commercial duly covered with tapestry cloth and labour for repair of revolving chair complete all as specified and directed . |
| 99 | Taking out u/s foam cushion from arms of seat and S&F new foam cushion 25mm thick 0.32 density covered with tapestry cloth complete all as specified and directed. |
| 100 | Cleaning the surfaces with sand paper and painting with black paint to all steel portion complete all as specified and directed. |
| 101 | Replacement of unserviceable Arm rest, Left/Right, made of black integral skin polyurethane with 75-85 shore 'A' hardness and reinforced with MS insert, scratch and weather resistant, slope towards front, match with existing, suitable for Chair visitor including taking out old unserviceable arm rest complete all as specified and directed. |
| 102 | Repair to chair wooden bottom without arm. |
| 103 | Dismantling carefully unserviceable leg and one stiffeners and supply and fixing new leg and stiffener of hard wood/sheesham all as specified and directed. |
| 104 | All as per Ser Item No. 18.1 above but for rails of chair wooden bottom without arms. |
| 105 | Cleaning the surfaces with sand paper and french polish to all wooden surfaces exposed to direct version. |
| 106 | Repair/ Replacement of cushion for sofa set Single seater, two seater, three seater and four/five seater. |
| 107 | Repair/replacement of cushion 4\\"thick best quality of Dunlop make covered with tapestry cloth approved quality with a cost not less than Rs. Two hundred per meter for seat only complete all as specified and directed. |
| 108 | All as per item No. 19.1 above but back ---ditto--- |
| 109 | Cleaning the surfaces with sand paper and french polish to all wooden surfaces exposed to direct vision. |
| 110 | Taking out/removal of existing tapestry cloth from cushion of sofa etc of any pattern/ description, refixing of existing cushions in position duly covered with best quality tapestry cloth of approved quality having cost not less than Rs. Two hundred fifty per meter by stitching etc for seat and back complete all as specified and directed |
| 111 | Repair Teapoy wooden/table centre/table peg/teapoy verandah |
| 112 | Replacement and fixing of leg and one stiffener of 1st class hard wood sheesham complete all as specified and directed. |
| 113 | All as per item No. 20.1 above but rail . |
| 114 | All as per item No. 20.1 here in before for top but for table centre/Teapoy wooden/Table peg. |
| 115 | All as per item No. 20.1 here in before for french polishing but for table Peg/Table centre/teapoy wooden. |
| 116 | Repair to book rack/book case steel & book case steel (glazed) |
| 117 | Replacement and fixing of glass size 10\\" x 28\\" x 5mm thick steel (glazed) including minor repair complete all as specified and as directed. |
| 118 | All as per item No. 21.1 above but for book case steel size 66\\"x12\\"x33\\". |
| 119 | Repair to Stool steel 305x305x510 |
| 120 | Cleaning the steel surfaces with sand paper and painted with two coats of synthetic enamel white paint complete all as specified and as directed. |
| 121 | Repair to Locker bedside wooden |
| 122 | Taking out unservicable shutter and S&F new shutter of 18 mm thick of block board, including providing 4 mm thick soft wood edging alround complete all as specified and directed. |
| 123 | Taking out unservicable back ply and S&F new back ply with 6 mm thick commercial ply all as specified and directed. |
| 124 | Replacement of rail of frame with shesham wood rail of appropriate size complete all as specified and directed. |
| 125 | Replacement of handle with Aluminium alloy handle fabricated type anodised 100 mm long Make: Classic ISI marked. |
| 126 | Replacement of hasp & staple with 75 mm aluminium anodised hasp & staple. |
| 127 | Replacement of hinges with 20 mm wide continuous (Piano) hinges mild steel bright finished or electro galvanised to door shutter of locker . |
| 128 | Replacement of top with 18 mm thick block board commercial. |
| 129 | Replacement of leg with shesham wood leg of appropriate size . |
| 130 | Cleaning the surfaces with sand paper and french polish to all wooden surfaces exposed to direct version. |
| 131 | Repair of steel rack 6 tier 1950 x 915 x 485mm, 76\\" x 36\\" x 12\\", 78\\" x 36\\" x 18\\" off sizes |
| 132 | Material and labour for painting with synthetic enamele OG colour paint on steel/iron surfaces of steel rack after preparation of surfaces with sand paper complete all as specified and as directed. |
| 133 | Repair to Table dressing ladies/gents |
| 134 | Removing of unserviceable old defaced mirrors unserviceable back plywood of mirror frame of table dressing ladies and S&F sheet glass electro copper plated mirror 5 mm thick and plywood commercial BWR grade 6 mm thick for back side to mirror frame and fixing to table complete all as specified and directed. |
| 135 | All as per item No 25.1 here-in-before but for table dressing gents complete all as specified and directed. |
| 136 | Removing of unserviceable chipped/old plastic laminated sheet from the table dressing ladies, S&F plastic laminated sheet natural teak veneer finish 1 mm thick on the top on both sides and on drawer front side with beading 3 mm thick complete all as specified and directed. |
| 137 | All as per item No 25.3 here-in-before but for table dressing gents complete all as specified and directed. |
| 138 | Removing of unserviceable broken plywood from drawer bottom of table dressing ladies and S&F plywood commercial BWR grade 6 mm thick complete all as specified and directed. |
| 139 | All as per item No 25.5 here-in-before but for table dressing gents complete all as specified and directed. |
| 140 | Removing the unserviceable knobs, S&F 25 mm chromium plated knobs with suitable screws complete all as specified and directed for table dressing ladies and gents. |
| 141 | Repair to charpoy GI pipe ply top |
| 142 | Removing existing unserviceable long rails from charpoy GI pipe (approved make) and supply and fixing with new long rails of size 1890mm made out of GI tube 32mm dia medium grade including cutting / threading and fixing to GI charpoy to bring it to the existing shape and size complete all as specified and directed. |
| 143 | Removing existing unserviceable short rails fron GI charpoy and fixing short rails of 810mm of GI tube 32mm dia medium grade (converted from retrieved long rails of GI charpoy) including necessary cutting, threading and fixing to GI charpoy as per existing shape and size complete all as specified and directed.(Note: GI pipe retrieved from serial No 6 above shall be reused under this item) |
| 144 | Removing existing unserviceable elbow and supply and fix new three way GI elbow (ISI marked) suitable for 32mm bore GI pipe complete all as specified and directed. |
| 145 | Removing existing unserviceable legs from GI charpoy and fix new legs of size 392mm of GI tube 32mm dia medium grade (converted from retrieved short rails of GI charpoy) including necessary cutting, threading and fixing to GI charpoy as per existing shape and size complete all as specified and directed. (Note: GI pipe retrieved from serial No 7 above shall be reused under this item) |
| 146 | Removing existing unserviceable check nuts from long rail and supply and fix new check nuts 6mm thick 32mm dia in its existing position complete all as specified and directed. |
| 147 | Removing existing broken/damaged MS square tube 25mm 16 guage as in stiffener and supply new MS square tube 25mm 16 guage stiffener of 900mm long welded both sides at equal distance to long rail and painting two coats of synthetic enamel paint black colour over a coat of red oxide to the stiffeners complete all as specified and directed. |
| 148 | Removing existing damaged/unserviceable plywood 12mm thick from GI Charpoy and supply and fix new 12mm thick plywood BWR grade (approved make) of size 2100mmx900mm fixed with flat head nut, bolt of size 6mm dia 75mm long with 3mm thick washer (Total 08 Nos per charpoy) duly drilling hole in ply wood and steel frame of charpoy (2 Nos each to long rails and 02 Nos each to short rails) complete all as specified and directed. |
| 149 | Charpoy with Ply Top 1980x900mm |
| 150 | Material and labour for 12mm thick BWR grade plywood (approved make) ISI marked as in charpoy hard top, screwed to 25x25x1.25mm thick MS square tube including taking out old unserviceable plywood complete all as specified and directed. |
| 151 | Material and labour for 25x25x1.50mm thick MS square tube (approved make), 850mm long, as in stiffener of charpoy with hard top, welded to long rail including taking out old unserviceable MS tube complete all as specified and directed. |
| 152 | Supply and fixing for 70x25x6mm thick MS plate, welded to frame of charpoy hard top to support ply top applying two coats of synthetic enamel paint colour black over a coat of red oxide including taking out old unserviceable MS flat complete all as specified and directed. |
| 153 | Material and labour for preparation of old treated steel surfaces of Charpoy IP w/ hard top (MAP) and applying a coat of synthetic enamel paint spray machine (approved make) complete all as specified and directed. |
| 154 | Repair of sofa set Single seater seater |
| 155 | Taking out / complete removal of existing tapestry cloth etc (seat , back and sides) of single seat sofa of any pattern/description (trade pattern), supplying and fixing cotton dori 8 to 10mm dia, repairing and replacement of unserviceable, covering the surface with hessian cloth of approved quality, fixing of foam 40mm thick, covered with khadi/malmal cloth having rate fifty rupees per running meter, provn of 100mm thick foam cushioning of density 32,best quality Dunlop make finally covered with tapestry cloth of approved quality having cost not less than Rs. Two hundred fifty per meter for seat, back and sides and polishing entire wooden surfaces complete all as specified and directed. |
| 156 | Repair of sofa set two seater |
| 157 | Taking out / complete removal of existing tapestry cloth etc (seat , back and sides) of two seater sofa of any pattern/description (trade pattern), supplying and fixing cotton dori 8 to 10mm dia, repairing and replacement of unserviceable, covering the surface with hessian cloth of approved quality, fixing of foam 40mm thick, covered with khadi/malmal cloth having rate fifty rupees per running meter, provn of 100mm thick foam cushioning of density 32 best quality Dunlop make finally covered with tapestry cloth of approved quality having cost not less than Rs. Two hundred fifty per meter for seat, back and sides and polishing entire wooden surfaces complete all as specified and directed. |
| 158 | Repair of sofa set three seater |
| 159 | Taking out / complete removal of existing tapestry cloth etc (seat , back and sides ) of three seater sofa of any pattern/description (trade pattern), supplying and fixing cotton dori 8 to 10mm dia, repairing and replacement of unserviceable, covering the surface with hessian cloth of approved quality, fixing of foam 40mm thick, covered with khadi/malmal cloth having rate fifty rupees per running meter, provn of 100mm thick foam cushioning of density32 best quality Dunlop make finally covered with tapestry cloth of approved quality having cost not less than Rs. Two hundred fifty per meter for seat, back and sides and polishing entire wooden surfaces complete all as specified and directed. |
| 160 | Repair of sofa set four seater |
| 161 | Taking out / complete removal of existing tapestry cloth etc (seat , back and sides) of four seater sofa of any pattern/description (trade pattern), supplying and fixing cotton dori 8 to 10mm dia, repairing and replacement of unserviceable, covering the surface with hessian cloth of approved quality, fixing of foam 40mm thick, covered with khadi/malmal cloth having rate fifty rupees per running meter, provn of 100mm thick foam cushioning of density 32 best quality Dunlop make finally covered with tapestry cloth of approved quality having cost not less than Rs. Two hundred fifty per meter for seat, back and sides and polishing entire wooden surfaces complete all as specified and directed. |
| 162 | Filling Cabinet Steel/Filling Pocket PCG-3 |
| 163 | Denting chipped surfaces and preparing the surfaces/ground Filling Cabinet with putty and applying two coat of Ist quality synthetic enamel paint internally by spray painting Silver colour complete all as specified and directed. |
| 164 | All as per item No. 32.1 above but externally. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender