Tender For External Repair Work For Technical Block Of Rttc Building, Vanivihar, Bhubaneswar.
Tender Value
19.71 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
3 days left
EMD
39440
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for External Repair Work For Technical Block Of Rttc Building, Vanivihar, Bhubaneswar.
BOQ
| Sl. No. | Item Description |
| 1 | Sub-Head : Dismantling and Demolishing |
| 2 | Demolishing cement concrete manually/ by mechanical means up to height of 19.00 mtr including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 3 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster up to height of 19.00 mtr including disposal of rubbish to the dumping ground within 50 metres lead excluding cost of scaffolding etc. |
| 5 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 6 | Sub-Head : Concrete Work |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level |
| 8 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to height of 19.00 mtr, excluding the cost of centering, shuttering, finishing and scaffolding etc. |
| 10 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for : |
| 12 | Columns, piers, abutments, pillars, posts and struts. |
| 13 | Sub-Head : Roofing |
| 14 | Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes fixed on walls with necessary screws and wooden plugs etc complete up to height of 19.00 mtr. |
| 15 | 100 mm diameter |
| 16 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, excuding cost of scaffolding,up to height of 19.00 mtr. (i) Single socketed pipes. |
| 17 | (i)Single socketed pipes. |
| 18 | 75 mm diameter |
| 19 | Sub-Head : Water Proofing |
| 20 | Grading roof for water proofing treatment with |
| 21 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 22 | Sub-Head : Finishing |
| 23 | 20 mm cement plaster (excluding cost of scaffolding) of mix : |
| 24 | 1:4 (1 cement: 4 coarse sand) |
| 25 | Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part there of excluding cost of scaffolding. |
| 26 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 27 | Finishing walls with Acrylic Smooth exterior paint of required shade. |
| 28 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 29 | Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work : |
| 30 | 100 mm diameter pipes |
| 31 | 150 mm diameter pipes |
| 32 | Sub-Head : Repairs to Buildings |
| 33 | Renewing glass panes, with putty and nails wherever necessary up to height of 19.00 mtr including racking out the old putty: |
| 34 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 35 | Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). |
| 36 | Renewal of old putty of glass panes (length) in windows up to height of 1900 mtr. |
| 37 | Sub-Head : NEW TECHNOLOGIES AND MATERIALS |
| 38 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 39 | 50 mm average thickness |
| 40 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete up to height of 19.00 mtr as per direction of Engineer-In-Charge. |
| 41 | Bars upto 12 mm diameter |
| 42 | Bars above 12 mm diameter |
| 43 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect up to height of 19.00 mtr. |
| 44 | SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer |
| 45 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications up to height of 19.00 mtr all complete as per directions of Engineer-in-charge. |
| 46 | Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). |
| 47 | 25 mm average thickness in 2 layers. |
| 48 | 50 mm average thickness in 3 layers. |
| 49 | Sub-Head : Market Rate Items |
| 50 | Dismantling tile work in external walls fixed with cement mortar up to height of 19.00 mtrwithout scaffolding including stacking material within 50 metres lead. |
| 51 | For thickness of tiles 10 mm to 25 mm |
| 52 | Finishing walls with Acrylic Smooth exterior paint of required shade at selected maximum seepage prone areas up to height of 19.00 mtr as per direction of Engineer-in-Charge. |
| 53 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of Smart Care damp sheath exterior primer of Asian paints or equivalent make applied @ 2.50 litre/10 sqm) |
| 54 | Uprooting/Removing trees and plants of any size from roof and walls surface at any height by uprooting the same with application of acid,chemicals i/c making good the damages with CP1:3/CC1:2:4 as per requirement all complete as per the direction of EIC. |
| 55 | Providing & erecting single scaffolding system on the external side of building upto Building height about 19.50 mtr made of best quality bamboo ballies @ 1.5 mtr centre to centre for vertical members and 1.00 mtr C/c for Horizental members including bracing & stiffening, bamboo jali,coir rope as required etc. complete with all safety measures to be taken for the work as per direction of Engineer-in-charge. ( The elevational area of the scaffolding shall be measured for payment purpose. The payment shall be made once irrespective of duration of scaffolding.)Note: - This item to be used for all items of the entire work judicially including dismantling tiles,plastering,painting,chipping, cleaning of reinforcement bars,applying adesive of SBR polymer,renewing of glass pannes & putty,fixing PVC RWP Pipe & fittings,uprooting trees/plants,applying polymer modified cement slurry,cleaning of glass pannes if any. |
| 56 | Providing and laying 20 mm thick (average) cement plaster of mix 1:4 (1 cement : 4 coarse sand) over undulated brick masonry or RCC surfaces, including hacking/roughening the surface for proper adhesion with the finished top coat, up to height of 19.00 mtr as per the directions of the Engineer-in-Charge. Rate shall include the cost of all materials, labor, T&P, scaffolding, and surface preparation. No extra payment shall be made on any account. The cost of the top coat of cement plaster shall be paid for separately. |
| 57 | Providing and applying polymer-modified cement slurry bond coat of mix proportion 1:4:7 (1 part Super Latex : 4 parts water : 7 parts cement by weight) over thoroughly cleaned and prepared surfaces, to provide a high-strength, water-resistant interface between old and new surfaces (such as concrete-to-concrete or plaster-to-masonry) to eliminate delamination, minimize shrinkage, and enhance bonding durability, as per the direction of the Engineer-in-Charge. The rate shall include the cost of all materials, labor, tools & plants , surface preparation, curing, and all incidental operations complete, and nothing extra shall be paid on any account. |
| 58 | Repairing existing damaged / swellen APP by using bitumen primer, Butane Torch and sealing the joints etc. complete as per direction of Engineer-in-Charge. |
| 59 | Painting two or more coats with bitumen emulsion paint (Bitufix of Dr Fixit or equivalent) on the existing damaged APP surface as per direction of Engineer-in-Charge. |
| 60 | Cleaning of glass panes within the building height of 19.00 mtr from ground level using liquid solvents, wiping tools, and polishing cloths, etc. complete as per the direction of the Engineer-in-Charge. The rate includes the cost of all materials, labor, T&P etc., complete, and nothing extra shall be paid on any account. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender