Tender For special Rep To Bldg No Ach-105 (Cook House & Dinning Hall) Of Boys Sports Coy, Asc Centre (South) Under Ge (Central) Bangalore.
Tender Value
49.30 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
0 days left
EMD
99000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Rep To Bldg No Ach-105 (Cook House & Dinning Hall) Of Boys Sports Coy, Asc Centre (South) Under Ge (Central) Bangalore.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of AC Corrugated or semi corrugated sheet etc any thickness including ridges as in roof covering complete all as directed. |
| 2 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as inroof covering/cladding towall,fixed with self tapping screws complete all as specified and as directed. |
| 3 | S&F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ridges/cladding/towall,fixed with self tapping screws complete all as specified and as directed. |
| 4 | Dismantling of structural steel including gates, purlins, rafters but excluding trusses complete all as sepcified and directed. |
| 5 | S&F rolled sections as in main and cross beams,hip and jack rafters; pulins where connected to common rafters and running rails; fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 6 | M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome complete all as specified and directed. |
| 7 | M&L for preparation of old steel surfaces over 10 Sqm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 8 | Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards / slab / blankets of any description and thickness including frame/grid of any description and S & F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including S&F for non asbestos fibre cement building board 6 mm thick laid /inserted to aluminium frame work in false ceilings including hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roofs by means of ceiling GI cleat and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and dircected. |
| 9 | Taking down chowkhats or frames n exc 1.5 Sqm (with out taking off shutters from the frame) complete all as specified and directed. |
| 10 | Taking down chowkhats or frames exc 1.5 Sqm and n.exc 4.00 sqm (with out taking off shutters from the frame) complete all as specified and directed. |
| 11 | M&L for Cutting holes in stone walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as required, exc half brick & not exc one brick complete all as specified and directed Note : Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall. |
| 12 | S&F factory made pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, mild steel sheet of 1.25 mm thickness complete as specified & directedNote : Butt Hinges will be measured and paid separately. |
| 13 | S&F factory made pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, mild steel sheet of 1.25 mm thickness complete as specified & directed. Note : Butt Hinges will be measured and paid separately. |
| 14 | M&L for PCC 1:2:4 type B0 using 12.50mm graded aggregate as in filling of chowkats etc incl necessary form work if reqd complete all as specified and directed. |
| 15 | S&F for Veneered Flush shutters 30mm thick solid core construction,with block board core and plywod face panels, commercial type on both sides complete all as specified and directed. |
| 16 | S&F Second class hardwood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass,guaze etc. edges of framing plain,charmfered or rounded,fitted with cut and mitred beads for securing glass etc.sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a) complete all as specified and directed. |
| 17 | S&F Powder coated aluminium sliding window (three way) frame & shutter with glazed shutter and without wiremesh shutter /skeleton section with the following details :-(i) Aluminium frame section 116x36.50x1.80mm.(ii) Aluminium shutter glazed/skeleton section 50x25x1.50mm thick.(iii) Aluminium grill size 50mmx50mm and 4 to 5mm thick bars complete all as specified.(iv) Fixing arrangements legs in hold fast in walls incl PCC (1:3:6) making goog distributed surfaces complete in originally shape.(v) 4mm thick glass orinary quality and fixed with rubber gasket for with glazed shutter etc.(vi) Stainless steel wire mesh 0.36mm nominal dia avg aperature 1.14mm and fixed with rubber gasket for without glazed shutter etc.(vii) Aluminium disc /bow hanle and locking system complete |
| 18 | S&F Powder coated aluminium Ventilator (partially fixed glazing and Partially louvered glazing) with the following details :-(i) Aluminium frame section 45x25x1.80mm.(ii) Fixing arrangements legs in hold fast in walls incl PCC (1:3:6) making goog distributed surfaces complete in originally shape.(iii) 4mm thick frosted glass orinary quality (partially fixed glazing and Partially louvered glazing) and fixed with rubber gasket for with glazed shutter etc. |
| 19 | S&F 100 mm Butt hinges, medium weight, cold rolled, mild steel complete all as specified and directed. |
| 20 | S&F 200 mm extruded aluminium alloy handles fabricated type complete all as specified and directed. |
| 21 | S&F 200mm long aluminium anodised barrel towerbolts of extruded section and fixed complete all as specified and directed. |
| 22 | S&F 300 mm long aluminium alloy,anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet,cast or extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 23 | S&F 140mm floor door stopper of aluminium alloy body and tongue,anodised,with hard drawn steel spring,fixed in floor complete all as specified and directed. |
| 24 | S&F 300mm, Mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed. |
| 25 | S&F stainless steel wire cloth 0.24 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed |
| 26 | M&L Preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 27 | M&L for Demolition of cement concrete (Unreinforced) in any position like ground floors, roof and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 28 | M&L for Dismanting stone set slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed |
| 29 | M&L for 18-20mm thick sadarhalli stone flooring, steps, jambs, pillars window cills,cooking platform skirting in cement mortar 1:4 including pointing in white cement (1:2) using marbble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:4 and rounding to edges complete all as specified and directed. |
| 30 | M&L for 18-20mm thick sadarhalli Skirting in cement mortor 1:4 including pointing in white cement (1:2) using marbble dust with admixture of pigmen to match with shade of granite including 15mm thick screed bed in CM 1:4 and rounding to edges complete all as specified and directed. |
| 31 | M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded aggregate as in sub base of flooring complete all as specified and directed. |
| 32 | M&L for 25 mm thick cement concrete 1:2:4, type B-0 using 12.5 mm graded aggregate as in levelling course or sub base to receive floor finishes complete all as specified and directed. |
| 33 | M&L for Dismanting floor, healrth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 34 | M&L for coloured joint free non-skid ceramic tiles 7 to 8mm thick area of each tile exc 0.11 sqm but not exc 0.18 sqm,in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 35 | M&L for coloured Glazed ceramic tiles in vertical surface 350 x 250 x 7 / 450x350x7 mm mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 36 | M&L 20mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM 1:6 and Rounding to edges complete all as specified and as directed. |
| 37 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 38 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and directed |
| 39 | S&F 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 40 | Excavation in post holes in soft/ loose soil each n exc 0.50 cum getting out returning, filling inand ramming earth or broken rubble mixed with earth around in layers not exc 25 cm complete all as specified and as directed |
| 41 | M&L for cement concrete 1:4:8 type D-2 using 40mm graded aggregate as in foundations fillings and mass concrete complete all as specified and directed. |
| 42 | M&L for returning filling of soft/loose soil in including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed. |
| 43 | M&L for removing excavated soil exc 250 m and but n.exc 500 m and depositing where directed complete all as specified and directed. |
| 44 | M&L for PCC 1:2:4 type B-0 using 12.5mm grades stone aggregate as in Padding over roof / chajja finished even and smooth without using extra cement complete all as specified and directed. |
| 45 | M&L Rendering 10mm thick on brick work or concrete surface in CM 1:3 surface finished even and smooth surface without using extra cement using WPC as per manufacturer's instructions complete all as speciried and directedNote : WPC will be measured and paid seperately. |
| 46 | M&L for Applying oil bound bitumen primer @ 1.50 Kg/Sqm and providing 3 mm thick APP modified water proofing membrane weighing 3.6 kg/sqm reinforced with non woven polyester matt weighing not less than 150 gm /sqm having softening point not less than 140 centigrade, having tensile strength of 650N/sqm and 350 N/sqm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch application with minimum 10cm side overlap and 15cm end lap, applying a coat of blown grade hot bitumen 85/25 over the membrane @ 1.2 Kg /Sqm top of membrane surface shall then be finished with solar reflective bituminious aluminium paint @ 0.10 Kg/Sqm complete all as directed including taking down existing treatment complete all as specified and directed |
| 47 | M&L for 75mm thick PCC (1:3:6) type C-1( using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n. exc. 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed. |
| 48 | M&L for hard core of guage not exc 63mm, deposited, spread and levelled in layers in exc 15cm thick using broken stone or boulders, watered, and rammed to a true surface complete all as specified and directed.Note : Compacted thickness will be measured and paid. |
| 49 | M&L for Treating anti termite treatment to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed. |
| 50 | S & F in repairs Rotational moulded polyethene water storage tanks 1000 lit capacity tripple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including dismantling of existing water tank including 20mm Ball Valves, 20mm Union, 20mm gate valves inclduidng taking down or dismantling of old tank complete all specified and directed |
| 51 | Taking up or down steel water tubing and connections 20 mm bore complete all as specified and as directed. |
| 52 | S&F 25m outer dia CPVC Pipe (ISI Marked) SDR II & plain CPVC SDR II fittings fixed on wall, celing or floors complete all as specified and as directed. |
| 53 | S&F in repairs 15mm Bib tap chromium plated fancy type cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for union complete all as specified and directed. |
| 54 | Demolition of Brickwork or PCC solid block or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 55 | M&L for precast cement concrete block (Type C1 1:3:6) using 20 mm size graded stone aggregates masonry with solid block,exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 56 | M&L for precast cement concrete block (Type C1 (1:3:6) using 20 mm size graded stone aggregates masonry with solid block,exc, 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed. |
| 57 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed. |
| 58 | M&L Loose filling with broken bricks of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed. |
| 59 | M&L for precast RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in CM (1:6) complete all as specified & as directed. |
| 60 | S&F mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for (Columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed. |
| 61 | S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches etc complete all as specified and directed. |
| 62 | M&L for PVC (SWR) floor trap 75mm dia plain with steel grating including jointing with solvent cement etc fixed in repair complete all as specified and as directed. |
| 63 | S&F PVC (SWR) 110mm dia bend complete all as specified and as directed. |
| 64 | M&L for providing PCC 1:2:4 using 20mm aggregate in window or door cills, lintels , bressumers, steps, quoin blocks (for use with masonry), string courses, copings. Kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (stone walling), Corbels, brackets etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc., and setting in mortar complete with joints to match complete all as specified and directed. |
| 65 | M&L Taking down cement plaster on Brick/Concrete surfaces incl raking out joints, hacking for key scrubbing down with water and Removing Rubbish of the MD Land complete all as specified and directed |
| 66 | M&L for rendering 15mm thick on brick masonary surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:4 mixed with WPC as per manufacturer's instructions, Surfaces finished even & smooth without using extra cement on external surfaces of wall incl chajja and including necessary scaffolding complete all as specified and as directed. Note : WPC to be measured and paid separately under relevant item |
| 67 | M&L for rendering 15mm thick on brick masonary walls in CM (1:6) finished even & smooth without using extra cement on internal surfaces complete all as specified and as directed. |
| 68 | M&L for rendering 10mm thick on fair face of brick work or concrete surfaces of ceiling in CM (1:3) finished even & smooth without using extra cement including necessary scaffolding complete all as specified and directed. |
| 69 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 70 | M&L for Preparation of newly plastered surface of ceiling of any description over 10 cm girth or width, not otherwise described and applying three coat of white wash complete all as specified and directed. |
| 71 | M&L Preparation of Old decorated surface and applying two coats of white wash on ceiling etc complete and as directed. |
| 72 | M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer including on newly plastered surfaces of wall including a coat of 1.5mm (Average) thickness cement based wall putty & necessary prepartation complete all as specified and as directed. |
| 73 | Complete removal of existing treatment of wall and applying a coat of 1.5mm (Average) thickness cement based wallcare putty for smooth finished of the surface and applying two coats of oil bound distemper complete all as specified and directed. |
| 74 | M&L for applying two coats of cement based paint including a coat of alkali resistant primer over new plastered surfaces of wall including necessary scaffolding complete all as specified and as directed. |
| 75 | Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 1.0 Km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed. |
| 76 | S&F stainless steel 25 mm dia metallic coated curtain rod complete all as specified and directed |
| 77 | S&F stainless steel curtain brackets 25 mm dia including wooden support complete all as specifed and as directed Please Enable Macros to View BoQ information |
| 78 | S&F stainless steel curtain brackets 25 mm dia including wooden support complete all as specifed and as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender