Tender For Repairs To Footpath / Hard Standing, Interlocking / Chequered Tiles, Culverts, Compound Wall, Fencing, Steel Gates, Barbed Wire / Concertina Coils And B/R Works At Dibt Mysore.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
5 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Footpath / Hard Standing, Interlocking / Chequered Tiles, Culverts, Compound Wall, Fencing, Steel Gates, Barbed Wire / Concertina Coils And B/R Works At Dibt Mysore.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of stone slabs and tiles laid dry of any description or thickness in floors, aprons, complete all as specified and as directed. |
| 2 | Demolition of PCC in ground floor and paving n.exc. 15 cm thickness (below or above ground level) and removal of same from outside MOD land complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Material and labour for Plain Cemnet Concrete, (1:4:8), type D2 using 40mm graded stone aggregate as in cement concrete in foundations, filling and mass concrete or sub base as directed finished fair and even complete all as specified and as directed. |
| 4 | Material and labour for machine pressed precast concrete rubber moulded coloured interlocking paver blocks of any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigment complete all as specified and as directed. |
| 5 | Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 6 | Demolition of stone slabs and tiles laid, bedded and pointed in any mortar or thickness in floors, aprons and removal of same from outside MOD land complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Material and labour for Chequered cement concrete tiles n.exc 0.18 sqm, 25mm thick, set with grey cement and no pigments, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed of CM (1:6) complete all as specified and as directed. |
| 8 | Demolition of bricks / block massonary work built in cement mortar including all quoins arches, pillar etc complete all as specified and as directed. |
| 9 | Material and labour for Precast cement concrete block, type B1 (1:2:4) using 20mm graded stone aggregate, masonry with solid blocks set in cement mortar (1:4), exc 10 cm in width and setting in mortar complete all as specified and as directed. |
| 10 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, and making the surface clean etc complete all as specified and as directed. |
| 11 | Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick, stone masonary or concrete surfaces of wall finished even and smooth without using extra cement complete all as specified and as directed. |
| 12 | Material and labour for two coats of cement base paint of approved tint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed. |
| 13 | Material and labour for preparing old plastered surfaces of walls and applying two coats of cement based paint of approved tint complete all as specified and as directed. |
| 14 | Demolition of Reinforcement cement concrete / cutting of roads of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 15 | Material and labour for pre cast Reinforced Cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in cover slabs for manholes, water tanks etc., set in CM (1:4) complete all as specified and as directed. |
| 16 | Material and labour for TMT steel bars as in reinforcement using 10mm dia bars and over cut to length bent to shape as required for hooping of column, hooking ends and spirally and binding with MS wire annealed not less than 0.90mm dia complete all as specified and as directed. |
| 17 | Dismantling wrought iron or mild steel, including gates work of any description not otherwise provided for complete all as specified and as directed. |
| 18 | Materials and labour for rolled mild steel framed work as in gates, grills, grating, pintle hinges, stops, hand made sliding bolts, weld mesh etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars and for ornamentals and intricate design conforming to Fe 410 -W (Gde- E- 250) quality A of angle iron of other sections complete drilled for fixing of steel sheeting or other coverings to be prepared for handing or sliding with and including either hooks and hinges, doors (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing with one shop coat of zinc chromate paint (including preparation of surface at contractor workshop before fabrication) complete all as specified and as directed. |
| 19 | Supply and fix steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS1161-1979 grade St-240 Grade 410-W Gde E-250 Quality complete all as specified and as directed. |
| 20 | Material and labour for applying two coats of synthetic enamel paint of approved tint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth complete all as specified and as directed. |
| 21 | Material and labour for 75mm thick Plain Cemnet Concrete (1:3:6), type C2 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed. |
| 22 | Dismantling CGI / asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and as directed. |
| 23 | Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 24 | Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mps as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 25 | Material and labour for preparation of old steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint of approved tint complete all as specified and as directed. |
| 26 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and removal of same from outside MOD land complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Providing and laying at or near ground level factory made kerb stone of M-25 grade (over all size of Kerb stone 450mm x 350mm x 150mm thick cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 28 | Material and labour for preparation of new concrete surfaces (Kerb stones) of any description over 10cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of primer complete all as specified and as directed. |
| 29 | Material and labour for preparation of old concrete surfaces (Kerb stones) of any description over 10cm in width or girth and applying one coats of synthetic enamel paint of approved tint complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 26, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender