Tender For Construction Of Various Transmission Elements (02 No. 400 Kv & 02 No. 220 Kv Transmission Lines) For Proposed 400 Kv Gss Amber (Jaipur North) (Distt. Jaipur) With Installation Of Opgw Network On Existing Line Including Survey, Supply Of Al
Tender Value
19.97 Crore
Estimated cost
Bid Submission
03 Nov 2026
1 days left
EMD
39.95 Lakhs
Bank guarantee accepted
Document Fee
17700
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Various Transmission Elements (02 No. 400 Kv & 02 No. 220 Kv Transmission Lines) For Proposed 400 Kv Gss Amber (Jaipur North) (Distt. Jaipur) With Installation Of Opgw Network On Existing Line Including Survey, Supply Of All Equipments/Materials, Erection (Including Civil Works), Testing And Commissioning (On Turnkey Basis) Against Specification No. Rvpn/Ehv/Bn-9018002613 (Ubn-Vpn2627wlob01491)
BOQ
| Sl. No. | Item Description |
| 1 | Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer, Anticlimbing devices etc. |
| 2 | High Tensile Steel |
| 3 | Mild Steel |
| 4 | Supply of Bolts & Nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, Spring Washers Etc. ) |
| 5 | Supply of Earthing material of Towers |
| 6 | Pipe Type |
| 7 | Counter Poise Earthing Set |
| 8 | Supply of following Tower Accessories |
| 9 | Danger Plate |
| 10 | Number Plate |
| 11 | Phase Plate (Set of three) |
| 12 | Circuit Plate |
| 13 | Anti Climbing Device (Fork Type) |
| 14 | Supply of following items for Aviation Requirements ** |
| 15 | Span Marker |
| 16 | Obstruction lights(To be proved as per IS:5613)-a) 1 Medium + 2 Low intensity |
| 17 | Design, manufacture and supply of following line material. ***11/kv 120KN |
| 18 | i) Disc Insulators |
| 19 | ii) Long Rod insulators |
| 20 | iii) Composite Long Rod insulators |
| 21 | Design, manufacture and supply of following line material. ***11/kv 160KN |
| 22 | i) Disc Insulators |
| 23 | ii) Long Rod insulators |
| 24 | iii) Composite Long Rod insulators |
| 25 | GSS Earthwire- size 7/3.66 mm |
| 26 | ACSR Moose Conductor |
| 27 | Hardware Fittings |
| 28 | Single Suspension H/W fittings conventional envelop type complete set suitable for ACSR 'Twin MOOSE' conductor for pilot string (Suitable for 1×23, 120KN Disc Insulators) |
| 29 | Single tension H/W fittings compression type for 'Twin MOOSE' conductor (Suitable for 1×24, 120KN Disc Insulators) |
| 30 | Double tension H/W fittings compression type for 'Twin MOOSE' conductor (Suitable for 2×24, 160KN Disc Insulators) |
| 31 | Accessories for ACSR Moose Conductor |
| 32 | Mid Span Compression Joint for ACSR Moose conductor |
| 33 | Repair Sleeve for ACSR Moose conductor |
| 34 | Vibration dampers for 'MOOSE' conductor |
| 35 | Twin spacers dampers for 'MOOSE' conductor |
| 36 | Rigid spacers for jumpers for 'MOOSE' conductor. |
| 37 | Accessories for Earthwire |
| 38 | Vibration Damper for 7/3.66 mm GS Earthwire |
| 39 | Mid Span Compression Joint for 7/3.66 mm GS Earthwire |
| 40 | Repair Sleeve for 7/3.66 mm GS Earthwire |
| 41 | Tension Clamp with flexible Copper Bond for 7/3.66 mm GS Earthwire |
| 42 | Power Connector |
| 43 | Counter Weight |
| 44 | OPGW Cable |
| 45 | 48 Fibre (DWSM) OPGW fibre optic cable |
| 46 | Installation Hardware set for 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box |
| 47 | Joint box (48 Fibre) |
| 48 | Any Other item required for successful completion of work |
| 49 | Note: *One set of installation hardware shall contain all installation hardware fittings as may be required for 1 km of OPGW. ** Quantity indiacted is for evaluation purpose. Actual quantity to be supplied after getting approval from owner. *** Bidder will quote either for Disc or Long Rod or Composit Long Rod insualtors. In case of bidder quote for more than one types of insulators, then in evaluation heighest cost of insulators will be considered. |
| 50 | Detailed Survey, including route alignment, profiling, tower optimization & spotting, check survey and Geotechnical Investigations etc. |
| 51 | Setting of Stub excluding cost of excavation and concreting but including back filling. 400KV D/C Towers. |
| 52 | a) Large Angle Tension Tower TTD |
| 53 | Excavation excluding back filling, including shoring, shuttering, De-watering etc. for |
| 54 | a) Normal Dry |
| 55 | b) Wet/Sandy soil |
| 56 | c) Soft/disintegrated rock |
| 57 | d) Hard rock |
| 58 | e) Hard soil/ Soil mixed with boulders |
| 59 | f) Wet Black Cotton Soil |
| 60 | Excavation for benching and transportation of soil at a suitable place |
| 61 | a) Normal Dry |
| 62 | b) Wet/Sandy soil |
| 63 | c) Hard soil/ Soil mixed with boulders |
| 64 | CEMENT CONCRETE M-20(1:1.5:3) Providing and laying cement concrete M- 20 grade 1:1.5:3 with single sized aggregate of nominal size 20 mm including preparing surfaces, shuttering mixing, placing, temping curing and finishing with leads and lifts etc. as per specification and drawings. |
| 65 | CEMENT CONCRETE M-10(1:3:6) Providing & laying cement concreting M-10 grade 1:3:6 with single nominal size 20 mm including preparing surfaces, shuttering, mixing placing, temping curing and finishing with leads and lifts etc. as per specification and drawings. |
| 66 | STEEL REINFORCEMENT :-Cutting, bending, binding, welding of joints if required, fixing and placing of steel reinforcement of Fe 500 grade as per specification and drawings |
| 67 | Erection of all types of super structures towers, their extensions and special towers etc. with its bolts, nuts and washers and bird guard etc. |
| 68 | Erection of Tower Accessories :- Erection of Anticlimbing devices. |
| 69 | Fixing of danger plate, circuit plates, number plate and phase plates etc. |
| 70 | Conductor Stringing :-Mounting of insulators and stringing of six Nos. twin bundle Moose conductor including laying, jointing, tensioning. Sagging, clamping and fixing of all line accessories etc. |
| 71 | Earth Wire Stringing : -Stringing of one Nos. 7/3.66 mm galvanised steel wire including laying, jointing. tensioning etc. |
| 72 | Earthing of transmission line towers- By Pipe type earthing sets, excluding cost of all materials |
| 73 | Earthing of transmission line towers- By Counterpoise earthing sets excluding cost of all materials |
| 74 | RIVETMENT & Tack welding :- :- Tack welding of Bolts & Nuts upto bottom cross arm of the tower |
| 75 | Aviation Lights :-Erection, testing and commissioning of Aviation Warning Light System in accordance with IS-5613, with one medium and two low intensity aviation warning lights. |
| 76 | Globules :-Erection of globules (Day marking sphere) 600 mm dia conforming to the latest ICAO regulations suitable for clamping on stranded steel earthwire alongwith the clamp etc. complete in all respect. |
| 77 | Avaition Painting :-Painting of tower above 45m from ground level for Aviation purpose |
| 78 | OPGW cable & Accessories |
| 79 | Stringing of 48 Fibre (DWSM) OPGW fibre optic cable |
| 80 | Installation Hardware set for 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box |
| 81 | Joint box (48 Fibre) |
| 82 | LAND AGGREGATION WORK FOR PREPARING LAND COMPENSATION CASE |
| 83 | For Scope of work as specified at item No. a (i to iv) in Annexure-A (enclosed) as per specified scope of work as per Annexure-A. |
| 84 | For Scope of work as specified at item No. b (i to iv) in Annexure-A (enclosed) as per specified scope of work as per Annexure-A. |
| 85 | Note: * Quantity indicated is for evaluation purpose. Actual quantity to be supplied after getting aproval.++One set of installation hardware shall contain all installation hardware fittings as may be required for 1 km of OPGW/Approach Fibre Optic cable. |
| 86 | Any Other Item |
| 87 | Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer, Anticlimbing devices etc. |
| 88 | High Tensile Steel |
| 89 | Mild Steel |
| 90 | Supply of Bolts & Nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, Spring Washers Etc. ) |
| 91 | Supply of Earthing material of Towers |
| 92 | Pipe Type |
| 93 | Counter poise Type |
| 94 | Supply of following Tower Accessories |
| 95 | Danger Plate |
| 96 | Number Plate |
| 97 | Phase Plate (Set of three) |
| 98 | Circuit Plate |
| 99 | Anti Climbing Device (Fork Type) |
| 100 | Supply of following items for Aviation Requirements ** |
| 101 | Span Marker |
| 102 | Obstruction lights(To be proved as per IS:5613)-a) 1 Medium + 2 Low intensity |
| 103 | Design, manufacture and supply of following line material. ***11/kv 120KN |
| 104 | i) Disc Insulators |
| 105 | ii) Long Rod insulators |
| 106 | iii) Composite Long Rod insulators |
| 107 | Design, manufacture and supply of following line material. ***11/kv 160KN |
| 108 | i) Disc Insulators |
| 109 | ii) Long Rod insulators |
| 110 | iii) Composite Long Rod insulators |
| 111 | GSS Earthwire- size 7/3.66 mm |
| 112 | ACSR Moose Conductor |
| 113 | Hardware Fittings |
| 114 | Single Suspension H/W fittings conventional envelop type complete set suitable for ACSR 'Twin MOOSE' conductor for pilot string (Suitable for 1×23, 120KN Disc Insulators) |
| 115 | Double 'I' suspension H/W fittings armour grip type complete set suitable for Twin ACSR'MOOSE' conductor (suitable for 2x23, 120 KN Disc Insulators ). |
| 116 | Single tension H/W fittings compression type for 'Twin MOOSE' conductor (Suitable for 1×24, 120KN Disc Insulators) |
| 117 | Double tension H/W fittings compression type for 'Twin MOOSE' conductor (Suitable for 2×24, 160KN Disc Insulators) |
| 118 | Accessories for ACSR Moose Conductor |
| 119 | Mid Span Compression Joint for ACSR Moose conductor |
| 120 | Repair Sleeve for ACSR Moose conductor |
| 121 | Vibration dampers for 'MOOSE' conductor |
| 122 | Twin spacers dampers for 'MOOSE' conductor |
| 123 | Rigid spacers for jumpers for 'MOOSE' conductor. |
| 124 | Accessories for Earthwire |
| 125 | Vibration Damper for 7/3.66 mm GS Earthwire |
| 126 | Mid Span Compression Joint for 7/3.66 mm GS Earthwire |
| 127 | Repair Sleeve for 7/3.66 mm GS Earthwire |
| 128 | Tension Clamp with flexible Copper Bond for 7/3.66 mm GS Earthwire |
| 129 | Power Connector |
| 130 | Counter Weight |
| 131 | OPGW Cable |
| 132 | 48 Fibre (DWSM) OPGW fibre optic cable |
| 133 | Installation Hardware set for 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box |
| 134 | Joint box (48 Fibre) |
| 135 | Any Other item required for successful completion of work |
| 136 | Note: *One set of installation hardware shall contain all installation hardware fittings as may be required for 1 km of OPGW. ** Quantity indiacted is for evaluation purpose. Actual quantity to be supplied after getting approval from owner. *** Bidder will quote either for Disc or Long Rod or Composit Long Rod insualtors. In case of bidder quote for more than one types of insulators, then in evaluation heighest cost of insulators will be considered. |
| 137 | Detailed Survey, including route alignment, profiling, tower optimization & spotting, check survey and Geotechnical Investigations etc. |
| 138 | Setting of Stub excluding cost of excavation and concreting but including back filling. 400KV D/C Towers. |
| 139 | (A) 400 kV D/C Towers |
| 140 | b) Large Angle Tension Tower TTD |
| 141 | (B) 400 kV S/C Towers |
| 142 | d) Large Angle Tension Tower TTD |
| 143 | Excavation excluding back filling, including shoring, shuttering, De-watering etc. for |
| 144 | a) Normal Dry |
| 145 | b) Wet/Sandy soil |
| 146 | c) Soft/disintegrated rock |
| 147 | d) Hard rock |
| 148 | e) Hard soil/ Soil mixed with boulders |
| 149 | f) Wet Black Cotton Soil |
| 150 | Excavation for benching and transportation of soil at a suitable place |
| 151 | a) Normal Dry |
| 152 | b) Wet/Sandy soil |
| 153 | c) Hard soil/ Soil mixed with boulders |
| 154 | CEMENT CONCRETE M-20(1:1.5:3) Providing and laying cement concrete M- 20 grade 1:1.5:3 with single sized aggregate of nominal size 20 mm including preparing surfaces, shuttering mixing, placing, temping curing and finishing with leads and lifts etc. as per specification and drawings. |
| 155 | CEMENT CONCRETE M-10(1:3:6) Providing & laying cement concreting M-10 grade 1:3:6 with single nominal size 20 mm including preparing surfaces, shuttering, mixing placing, temping curing and finishing with leads and lifts etc. as per specification and drawings. |
| 156 | STEEL REINFORCEMENT :-Cutting, bending, binding, welding of joints if required, fixing and placing of steel reinforcement of Fe 500 grade as per specification and drawings |
| 157 | Erection of all types of super structures towers, their extensions and special towers etc. with its bolts, nuts and washers and bird guard etc. |
| 158 | Civil Work/Foundation of Lattice Structure (400 kV) |
| 159 | Tower (400KV) MKD TC |
| 160 | Erection of Tower Accessories |
| 161 | Erection of Anticlimbing devices. |
| 162 | Fixing of danger plate, circuit plates, number plate and phase plates etc. |
| 163 | Mounting of insulators and stringing of six Nos. twin bundle Moose conductor including laying, jointing, tensioning. Sagging, clamping and fixing of all line accessories etc. |
| 164 | Earth Wire Stringing : -Stringing of one Nos. 7/3.66 mm galvanised steel wire including laying, jointing. tensioning etc. |
| 165 | Earthing of transmission line towers- By pipe type earthing sets, excluding cost of all materials |
| 166 | Earthing of transmission line towers- By counterpoise earthing sets excluding cost of all materials |
| 167 | RIVETMENT & Tack welding :-Providing and laying cement concrete M-15 grade 1:2:4 with single sized aggregate of nominal size 20 mm including preparing surfaces, shuttering mixing, placing, temping curing and finishing with leads and lifts etc. as per specification and drawings. |
| 168 | Dry stone revetment (including excavation back filling and levelling) |
| 169 | Random stone masonary with cement sand mortar with (1:6) (including cement & back filling and levelling) by surplus excavation earth including pointing (flush and ruled type) with cement sand mortar 1:3 |
| 170 | Back filling and levelling of the volumes enclosed by the revetment walls with excavated earth at locations. |
| 171 | Back-filling with borrowed earth |
| 172 | i) Beyond 50 m upto 100 m |
| 173 | Tack welding of Bolts & Nuts upto bottom cross arm of the tower |
| 174 | Aviation Lights :-Erection, testing and commissioning of Aviation Warning Light System in accordance with IS-5613, with one medium and two low intensity aviation warning lights. |
| 175 | Erection of globules (Day marking sphere) 600 mm dia conforming to the latest ICAO regulations suitable for clamping on stranded steel earthwire alongwith the clamp etc. complete in all respect. |
| 176 | Avaition Painting :-Painting of tower above 45m from ground level for Aviation purpose |
| 177 | OPGW cable & Accessories |
| 178 | Stringing of 48 Fibre (DWSM) OPGW fibre optic cable |
| 179 | Installation Hardware set for 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box |
| 180 | Joint box (48 Fibre) |
| 181 | Destringing of ACSR Moose Conductor/Earthwire/OPGW |
| 182 | (i) Twin ACSR Moose Conductor (D/C) |
| 183 | (ii) Earth wire |
| 184 | (iii) OPGW Cable |
| 185 | Restringing of ACSR Moose Conductor/Earthwire/OPGW |
| 186 | (A) Restringing of ACSR Moose conductor (D/C) :- Dismantling of vibration damper and armour rods, fitting of rollers, detensioning, holding and lowering of conductor, de-hosting of insulators string as required and jointing of conductor and other work as per specification and deposited in our store and stacked. |
| 187 | (i) Twin Moose conductor (D/C) |
| 188 | (ii) One No. Earth wire |
| 189 | (iii) OPGW Cable |
| 190 | Dismantling of 400KV D/C towers |
| 191 | LAND AGGREGATION WORK FOR PREPARING LAND COMPENSATION CASE |
| 192 | For Scope of work as specified at item No. a (i to iv) in Annexure-A (enclosed) as per specified scope of work as per Annexure-A. |
| 193 | For Scope of work as specified at item No. b (i to iv) in Annexure-A (enclosed) as per specified scope of work as per Annexure-A. |
| 194 | Note: * Quantity indicated is for evaluation purpose. Actual quantity to be supplied after getting aproval.++One set of installation hardware shall contain all installation hardware fittings as may be required for 1 km of OPGW/Approach Fibre Optic cable. |
| 195 | Any Other Item |
| 196 | Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer, Anticlimbing devices etc. |
| 197 | High Tensile Steel |
| 198 | Mild Steel |
| 199 | Supply of Bolts & Nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, Spring Washers Etc. ) |
| 200 | Supply of Earthing material of Towers |
| 201 | Pipe Type |
| 202 | Supply of following Tower Accessories |
| 203 | Danger Plate |
| 204 | Number Plate |
| 205 | Phase Plate (Set of three) |
| 206 | Design, manufacture and supply of following line material. |
| 207 | i) 70 kN Disc Insulators |
| 208 | ii) Porcelain Long Rod insulators 70kN |
| 209 | i) 120 kN Disc Insulators |
| 210 | ii) Porcelain Long Rod insulators 120kN |
| 211 | ACSR Zebra Conductor (54/3.18MM AL+7/3.18MM Steel) |
| 212 | Accessories for ACSR Zebra Conductor |
| 213 | Mid Span Compression Joint for ACSR Zebra Conductor |
| 214 | Repair Sleeve for ACSR Zebra Conductor |
| 215 | Preformed Armour Rod for ACSR Zebra Conductor |
| 216 | Vibration Damper for ACSR Zebra Conductor |
| 217 | Hardware Fittings for ACSR Zebra Conductor |
| 218 | Single Suspension H/W fittings for ACSR Zebra Conductor |
| 219 | Single Tension H/W fittings for ACSR Zebra Conductor |
| 220 | Double Tension H/W fittings for ACSR Zebra Conductor |
| 221 | OPGW Cable |
| 222 | 48 Fibre (DWSM) OPGW fibre optic cable |
| 223 | Installation Hardware set for 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box |
| 224 | Joint box (48Fibre) |
| 225 | Any Other item required for successful completion of work |
| 226 | Note: *One set of installation hardware shall contain all installation hardware fittings as may be required for 1 km of OPGW. ** Quantity indiacted is for evaluation purpose. Actual quantity to be supplied after getting approval from owner. *** Bidder will quote either for Disc or Long Rod or Composit Long Rod insualtors. In case of bidder quote for more than one types of insulators, then in evaluation heighest cost of insulators will be considered. |
| 227 | Detail Survey as per tentative route-Which includes the following major activities-Pegging of line route, providing of survey pillar at an interval of 3-4 KM in the line route with required jungle clearance for survey, profile preparation of approved route on graph sheet and marking of offset on either side of line, marking of side clearance for hills, sand dunes etc, as per specification and tower scheduling. |
| 228 | Check survey as per approved route of line which includes-Re-checking of the line route as per approved profile, chainage, tower center marking, pit marking, bisection of angle tower as required at site. |
| 229 | Excavation-Excavation, excluding back filling, including shoring,shuttering, dewatering, etc. upto the required depth as per foundation specification/drawings. |
| 230 | (i) Any soil, soft rock other than hard rock |
| 231 | (ii) Hard rock (with blasting subject to permission or without blasting) |
| 232 | SETTING OF TEMPLATE & STUB/ANCHOR BOLT:-Setting of template & stub/ anchor bolt & removal after concreting, excluding cost of excavation and concreting but including back filling with excavated/ borrowed earth (with lead & lift) in layers with ramming andwatering as per specification. |
| 233 | (i) Tower including extension upto 9 Meter |
| 234 | CONCRETING: Providing and laying cement concrete for all types of foundation as per latest ISS:456 including cement, sand, stone aggregate 20mm nominal size,water etc., preparing surfaces, shuttering, mixing, placing, ramming, curing, finishing as per specification and drawings. |
| 235 | 1:3:6 Mix |
| 236 | 1:1.5:3 Mix |
| 237 | STEEL REINFORCEMENT: Cutting, bending, welding of joints if required,fixing and placing of steel reinforcement as per specification and drawings including material. |
| 238 | EARTHING |
| 239 | (A) Earthing of towers with pipe type earthing excluding the supply of pipes, wires, flats &connectors, but including coke/charcoal, etc.,excavation,augering and backfilling in all types of soil. |
| 240 | ERECTION OF TOWERS: Erection of super structures including D-shackles,ACD, Hangers, U-Bolts, step bolts, danger plate, phase plate, number plate etc. Also including tack welding of bolts & nuts upto bottom cross arm/beam level including application of Zinc Rich paint |
| 241 | Erection of tower (with extension upto 9 Meters) |
| 242 | CONDUCTOR STRINGING: Stringing of ACSR Zebra including hoisting of insulator string, laying, jointing & tensioning of conductor, clamping with Armour rods and fixing of vibration damper per route KM of the line. |
| 243 | (i) Single Conductor |
| 244 | Destringing of ACSR Zebra Conductor/Earthwire |
| 245 | (i) Single ACSR Zebra Conductor |
| 246 | (ii) Earth wire 7/4.0 mm |
| 247 | Restringing of ACSR Zebra Conductor/Earthwire |
| 248 | (A) Restringing of ACSR Zebra conductor:- Dismantling of vibration damper and armour rods, fitting of rollers, detensioning, holding and lowering of conductor, de-hosting of insulators string as required and jointing of conductor and other work as per specification and deposited in our store and stacked. |
| 249 | (i) Single conductor |
| 250 | (ii) One No. Earth wire 7/4.0mm |
| 251 | Dismantling of 132, 220 kV S/C D/C towers-All |
| 252 | RIVETMENT OF TOWERS |
| 253 | (A) Providing and laying cement concrete including curing, compaction etc. complete using stone aggregate 40 mm nominal size (crusher broken) in foundation plinth, using 1 Cement: 5 Sand: 10 aggregate mix. |
| 254 | (B) Random rubble stone masonary for rivetment in 1:5 cement sand mortar including providing and fixing 100mm dia PCC drain pipe & raised and cut-pointing on stone masonary in 1:3 cement sand mortar excluding excavation but including Back filling inside rivetment using excavated/ borrowed earth (with all lead & lift) in layers not exceeding 20cm in depth & consolidating each deposited layer by ramming and watering. |
| 255 | (C) Random rubble dry stone pitching including preparing surface etc. complete with raised & cut pointing in cement sand mortar 1:3 curing etc. |
| 256 | (D) Cement concrete coping grade 1:2:4 (1cement: 2coarse sand :4 graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complete for 75mm thick with 20mm thick nominal size aggregate |
| 257 | Installation of OPGW |
| 258 | Stringing of 48 Fiber (DWSM) OPGW FIBRE OPTIC CABLE |
| 259 | Installation Hardware set for above 48Fibre OPGW cabling including of all cable fittings and accessories exept joint Box |
| 260 | JOINT BOX (48 FIBER) OPGW CABLE |
| 261 | LAND AGGREGATION WORK FOR PREPARING LAND COMPENSATION CASE |
| 262 | For Scope of work as specified at item No. a (i to iv) in Annexure-A (enclosed) as per specified scope of work as per Annexure-A. |
| 263 | For Scope of work as specified at item No. b (i to iv) in Annexure-A (enclosed) as per specified scope of work as per Annexure-A. |
| 264 | Note: * Quantity indicated is for evaluation purpose. Actual quantity to be supplied after getting aproval.++One set of installation hardware shall contain all installation hardware fittings as may be required for 1 km of OPGW/Approach Fibre Optic cable. |
| 265 | Any Other Item required for successful construction of line |
| 266 | Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer, Anticlimbing devices etc. |
| 267 | High Tensile Steel |
| 268 | Mild Steel |
| 269 | Supply of Bolts & Nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, Spring Washers Etc. ) |
| 270 | Supply of Earthing material of Towers |
| 271 | Pipe Type |
| 272 | Supply of following Tower Accessories |
| 273 | Danger Plate |
| 274 | Number Plate |
| 275 | Phase Plate (Set of three) |
| 276 | Design, manufacture and supply of following line material. |
| 277 | i) 120 kN Disc Insulators |
| 278 | ii) Porcelain Long Rod insulators 120kN |
| 279 | ACSR Zebra Conductor (54/3.18MM AL+7/3.18MM Steel) |
| 280 | Accessories for ACSR Zebra Conductor |
| 281 | Mid Span Compression Joint for ACSR Zebra Conductor |
| 282 | Repair Sleeve for ACSR Zebra Conductor |
| 283 | Vibration Damper for ACSR Zebra Conductor |
| 284 | Hardware Fittings for ACSR Zebra Conductor |
| 285 | Single Tension H/W fittings for ACSR Zebra Conductor |
| 286 | Double Tension H/W fittings for ACSR Zebra Conductor |
| 287 | OPGW Cable |
| 288 | 48 Fibre (DWSM) OPGW fibre optic cable |
| 289 | Installation Hardware set for 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box |
| 290 | Joint box (48Fibre) |
| 291 | Any Other item required for successful completion of work |
| 292 | Note: *One set of installation hardware shall contain all installation hardware fittings as may be required for 1 km of OPGW. ** Quantity indiacted is for evaluation purpose. Actual quantity to be supplied after getting approval from owner. *** Bidder will quote either for Disc or Long Rod or Composit Long Rod insualtors. In case of bidder quote for more than one types of insulators, then in evaluation heighest cost of insulators will be considered. |
| 293 | Detail Survey as per tentative route-Which includes the following major activities-Pegging of line route, providing of survey pillar at an interval of 3-4 KM in the line route with required jungle clearance for survey, profile preparation of approved route on graph sheet and marking of offset on either side of line, marking of side clearance for hills, sand dunes etc, as per specification and tower scheduling. |
| 294 | Check survey as per approved route of line which includes-Re-checking of the line route as per approved profile, chainage, tower center marking, pit marking, bisection of angle tower as required at site. |
| 295 | Excavation-Excavation, excluding back filling, including shoring,shuttering, dewatering, etc. upto the required depth as per foundation specification/drawings. |
| 296 | (i) Any soil, soft rock other than hard rock |
| 297 | (ii) Hard rock (with blasting subject to permission or without blasting) |
| 298 | SETTING OF TEMPLATE & STUB/ANCHOR BOLT:-Setting of template & stub/ anchor bolt & removal after concreting, excluding cost of excavation and concreting but including back filling with excavated/ borrowed earth (with lead & lift) in layers with ramming andwatering as per specification. |
| 299 | (i) Tower including extension upto 9 Meter |
| 300 | CONCRETING: Providing and laying cement concrete for all types of foundation as per latest ISS:456 including cement, sand, stone aggregate 20mm nominal size,water etc., preparing surfaces, shuttering, mixing, placing, ramming, curing, finishing as per specification and drawings. |
| 301 | 1:3:6 Mix |
| 302 | 1:1.5:3 Mix |
| 303 | STEEL REINFORCEMENT: Cutting, bending, welding of joints if required,fixing and placing of steel reinforcement as per specification and drawings including material. |
| 304 | EARTHING |
| 305 | (A) Earthing of towers with pipe type earthing excluding the supply of pipes, wires, flats &connectors, but including coke/charcoal, etc.,excavation,augering and backfilling in all types of soil. |
| 306 | ERECTION OF TOWERS: Erection of super structures including D-shackles,ACD, Hangers, U-Bolts, step bolts, danger plate, phase plate, number plate etc. Also including tack welding of bolts & nuts upto bottom cross arm/beam level including application of Zinc Rich paint |
| 307 | Erection of tower (with extension upto 9 Meters) |
| 308 | CONDUCTOR STRINGING: Stringing of ACSR Zebra including hoisting of insulator string, laying, jointing & tensioning of conductor, clamping with Armour rods and fixing of vibration damper per route KM of the line. |
| 309 | (i) Single Conductor |
| 310 | Destringing of ACSR Zebra Conductor/Earthwire |
| 311 | (i) Single ACSR Zebra Conductor |
| 312 | (ii) Earth wire 7/4.0 mm |
| 313 | Restringing of ACSR Zebra Conductor/Earthwire |
| 314 | (A) Restringing of ACSR Zebra conductor:- Dismantling of vibration damper and armour rods, fitting of rollers, detensioning, holding and lowering of conductor, de-hosting of insulators string as required and jointing of conductor and other work as per specification and deposited in our store and stacked. |
| 315 | (i) Single conductor |
| 316 | (ii) One No. Earth wire 7/4.0mm |
| 317 | Dismantling of 132, 220 kV S/C D/C towers-All |
| 318 | Installation of OPGW |
| 319 | Stringing of 48 Fiber (DWSM) OPGW FIBRE OPTIC CABLE |
| 320 | Installation Hardware set for above 48Fibre OPGW cabling including of all cable fittings and accessories exept joint Box |
| 321 | JOINT BOX (48 FIBER) OPGW CABLE |
| 322 | LAND AGGREGATION WORK FOR PREPARING LAND COMPENSATION CASE |
| 323 | For Scope of work as specified at item No. a (i to iv) in Annexure-A (enclosed) as per specified scope of work as per Annexure-A. |
| 324 | For Scope of work as specified at item No. b (i to iv) in Annexure-A (enclosed) as per specified scope of work as per Annexure-A. |
| 325 | Note: * Quantity indicated is for evaluation purpose. Actual quantity to be supplied after getting aproval.++One set of installation hardware shall contain all installation hardware fittings as may be required for 1 km of OPGW/Approach Fibre Optic cable. |
| 326 | Any Other Item required for successful construction of line |
| 327 | OPGW Cable |
| 328 | 48 Fibre (DWSM) OPGW fibre optic cable |
| 329 | Installation Hardware set for 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box |
| 330 | Joint box (48Fibre) |
| 331 | Note: * Quantity indicated is for evaluation purpose. Actual quantity to be supplied after getting aproval.++One set of installation hardware shall contain all installation hardware fittings as may be required for 1 km of OPGW/Approach Fibre Optic cable. |
| 332 | Any Other Item required for successful construction of line |
| 333 | Detail Survey as per tentative route-Which includes the following major activities-Pegging of line route, providing of survey pillar at an interval of 3-4 KM in the line route with required jungle clearance for survey, profile preparation of approved route on graph sheet and marking of offset on either side of line, marking of side clearance for hills, sand dunes etc, as per specification and tower scheduling. |
| 334 | Installation of OPGW |
| 335 | Stringing of 48 Fiber (DWSM) OPGW FIBRE OPTIC CABLE |
| 336 | Installation Hardware set for above 48Fibre OPGW cabling including of al cable fittings and accessories exept joint Box |
| 337 | JOINT BOX (48 FIBER) OPGW CABLE |
| 338 | Destringing of Earthwire (7/4.0mm) with depositing in nearest RVPN Store. |
| 339 | Earth wire 7/4.0 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender