Tender For Construction Of Ri Office-Cum-Residential Building At Sarabong In The District Of Nuapada For The Year 2025-26_Building
Tender Value
60.85 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
0 days left
EMD
60860
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nuapada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Ri Office-Cum-Residential Building At Sarabong In The District Of Nuapada For The Year 2025-26_Building
BOQ
| Sl. No. | Item Description |
| 1 | GROUND FLOOREarth work in excavation of foundation in hard soil with in intial lead and lift including rough dressing and levelling the bed etc complete |
| 2 | Filling in foundation and plinth with sand well watered and rammed including cost conveyance and royalty etc. complete. |
| 3 | Cement Concrete (1:3:6) using 4cm size B.H.G.H.B. metal including cost conveyance royalaties Taxes of all materials etc complete |
| 4 | Providing P.C.C ( 1:2:4) with 12 size stone aggregates |
| 5 | Brickwork with Flyash bricks in cement mortar (1:6) in Foundation and Plinth |
| 6 | Flyash Brick masonary in cement mortor (1:6) in Superstructure including watering & curing with cost conveyance royalities taxes of all materials, labour charges, T&P etc. required for the work complete. |
| 7 | R.C.C. work of M-25 grade with 20mm & down graded bhcbg chips including cost conveyance etc. complete Column in Sub- structure |
| 8 | Column in Superstructure |
| 9 | Plinth Beam |
| 10 | Lintel |
| 11 | Roof Beam |
| 12 | Roof Slab |
| 13 | Chajja |
| 14 | Stair |
| 15 | Straighing,cutting,bending,binding of M.S.rods/tor steel bars including grills and placing in position for R.C.C work including cost allmaterials,labour, T&P etc complete including cost of binding wire 18 to 20 gauge |
| 16 | 20mm thick cement plastering in cement mortor (1:6) to Stone work including cost, conveyance, royalties , taxes of all materials etc complete. |
| 17 | 16mm thick cement plastering in cement mortor (1:6) to brick work including cost, conveyance, royalties , taxes of all materials etc complete. |
| 18 | 12mm thick cement plastering in cement mortor (1:6) over brick masonry including cost, conveyance, royalties , taxes of all materials etc complete. |
| 19 | 6mm thick cement plaster ( 1: 4) over R.C.C works including all cost Etc.complete. |
| 20 | Labour for fixing of M.S doors and windows shutters of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 21 | Supplying ,fitting and fixing of openable UPVC door with frame sliding window of approved make with 6mm thick glass of approved quality complete with frame ,shutters and all fitting and fixtures. |
| 22 | Supplying ,fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame ,shutters and all fitting and fixtures. |
| 23 | Vitrified tile Flooring including cost of all materials , all labour & other materials etc complete. |
| 24 | Vitrified tile Dados including cost of all materials , all labour & other materials etc complete. |
| 25 | Fixing Antiskiting Ceramic tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 26 | Painting two coats to new Iron work with any approved Enamel paint including sand papering & polishing the surface with cost of material,labour charges,T&P etc. required for the work complete. |
| 27 | Wall Painting two coats with Distemper of approved shade over a coat of Priming on new work to give an even shade including cost of Distemper,primer,labour charges, T&P etc. required for the work complete. |
| 28 | Weather coat paint of 2coats to outside wall with any approved shade over a coat of Priming with any approved (water bound) primer,labour charges,cost of materials etc. complete |
| 29 | Providing,fitting,fixing of Gypsum Board ceiling including all fitting,cost of all materials,all taxes,labour, T&P etc.complete as per direction of the Engineer-in-charge. |
| 30 | Finishing wall surface of walls with Acrylic wall putty ( water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging, charges with cost of all materials taxes labour t&P etc complete |
| 31 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. |
| 32 | FIRST FLOORR.C.C. work of M-25 grade with 20mm & down graded bhcbg chips including cost conveyance etc. complete Column in Superstructure |
| 33 | Lintel |
| 34 | Roof Beam |
| 35 | Roof Slab |
| 36 | Chajja |
| 37 | Stair |
| 38 | Straighing,cutting,bending,binding of M.S.rods/tor steel bars including grills and placing in position for R.C.C work including cost allmaterials,labour, T&P etc complete including cost of binding wire 18 to 20 gauge |
| 39 | Fly ash Brick masonary in cement mortor (1:6) in Superstructure including watering & curing with cost conveyance royalities taxes of all materials, labour charges, T&P etc. required for the work complete. |
| 40 | 16mm thick cement plastering in cement mortor (1:6) to brick work including cost, conveyance, royalties , taxes of all materials etc complete. |
| 41 | 12mm thick cement plastering in cement mortor (1:6) over brick masonry including cost, conveyance, royalties , taxes of all materials etc complete. |
| 42 | 6mm thick cement plaster ( 1: 4) over R.C.C works including all cost Etc.complete. |
| 43 | Labour for fixing of M.S doors and windows shutters of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 44 | Supplying ,fitting and fixing of openable UPVC door with frame sliding window of approved make with 6mm thick glass of approved quality complete with frame ,shutters and all fitting and fixtures. |
| 45 | Supplying ,fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame ,shutters and all fitting and fixtures. |
| 46 | Providing,fitting,fixing of Gypsum Board ceiling including all fitting,cost of all materials,all taxes,labour, T&P etc.complete as per direction of the Engineer-in-charge. |
| 47 | Finishing wall surface of walls with Acrylic wall putty ( water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging, charges with cost of all materials taxes labour t&P etc complete |
| 48 | Painting two coats to new Iron work with any approved Enamel paint including sand papering & polishing the surface with cost of material,labour charges,T&P etc. required for the work complete. |
| 49 | Vitrified Tile Flooring in rooms including cost of all labour & other materials etc complete. |
| 50 | Vitrified tile Dados including cost of all materials , all labour & other materials etc complete. |
| 51 | 20mm thick cement grading plaster in cement mortor (1:4) over roof slab including cost, conveyance, royalties , taxes of all materials etc complete. |
| 52 | Wall Painting two coats with Distemper of approved shade over a coat of Priming on new work to give an even shade including cost of Distemper,primer,labour charges, T&P etc. required for the work complete. |
| 53 | Weather coat paint of 2coats to outside wall with any approved shade over a coat of Priming with any approved (water bound) primer,labour charges,cost of materials etc. complete |
| 54 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. |
| 55 | EIRecessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire: Finolex/ L&T / Anchor / Havels /HPL / V Guard/KEI/Polycab/Gloster) (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) -do- Group A |
| 56 | -do- Group B |
| 57 | -do- Group C |
| 58 | Recessed wiring to Fan Point in... -do- Group B |
| 59 | Recessed wiring to Call Bell Point in... -do- Group C |
| 60 | Recessed wiring to Exhaust Fan Point in.. -do- Group B |
| 61 | S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof. (M-22) |
| 62 | S/F of Angle holder replacing Ceilling Rose (Make : Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 63 | S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 64 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 65 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 66 | S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC. (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 67 | S/F of computer board of 12 modular metal box with modular base & cover in recess including providing and fixing of consisting of 3 nos of 5amp modular switch and modular socket & 1 no of Mini MCB, connection, painting etc as required. (Make of Switch & Socket: Anchor / Cona/ Greatwhite/ Havells/ HPL/ Preeti) |
| 68 | S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection. (Make : Anchor / Cona/ Greatwhite/ Havells/ Legrand/ L&T) |
| 69 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 2 Modular box with base & cover |
| 70 | 6 Modular box with base & cover |
| 71 | 8 Modular box with base & cover |
| 72 | 12 Modular box with base & cover |
| 73 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire: Finolex/ L&T / Anchor / Havels /HPL / V Guard/ KEI/ Greatwhite/ Polycab) 2x1.5+1x1.5 (1.8.1) |
| 74 | 2x2.5+1x1.5 (1.8.2) |
| 75 | 2x4+1x1.5 (1.8.3) |
| 76 | 2x6+1x2.5 (1.8.4) |
| 77 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 78 | S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) (Make : Legrand/ LK/SCHNEIDER/C&S/ABB/SIEMENS) |
| 79 | S/F of 6 A to 32 A ratings , DP MCB, C curve, 10 KA breaking capacity in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required. (Make : Legrand/ LK/SCHNEIDER/C&S/ABB/SIEMENS) |
| 80 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of MCB 8 way Single door (2.3.2) |
| 81 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 ) |
| 82 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 83 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 84 | Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31) |
| 85 | Supply and fixing of 300mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12\\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delux R/ Orient-Power Flow DBB/ Pollycab -Fresh on DBB ) |
| 86 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 87 | S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections ( Make- Crompton/ HPL/ Polycab/ Havells/Orient / Panasonic/ RR/K-lite ) |
| 88 | Supply and fixing of 1200mm A.C. Ceiling fan (1 star) with all accessories and connections with out fan regulator (Make:Usha-Striker neo HS/Crompton- HS/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White - Aldous/ Pollycab - Vital HS ) OR AS PER EIC |
| 89 | S/F step type modular fan regulator |
| 90 | S/F of 15mm dia down rod with all accessories (1.39+1.41) |
| 91 | Supply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval type including necessary connections. ( M-5 ) (Make: Havells/ Bajaj/Equivallent Make) |
| 92 | Supply and fixing of 45-48 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections (Make- Crompton/ Phillips/ HPL/ Polycab/ Havells/ Panasonic/ RR/ Orient/K-Lite ) |
| 93 | S/F of 15w Watt LED Bulb (Make- Crompton/ Phillips/ Havells/ Panasonic/Orient/K-Lite) |
| 94 | S/F of 2000 VA/24V Inverter with 2 nos. 180Ah battery including trolley arrangement (Make: V-Guard/ Microtake/ Luminous) |
| 95 | Supply & Instalation of 6 mtr long hot dip galvanized Octagonal pole having base dia of 155 mm and top dia of 70 mm and plate thick ness of 4 mm or more complete with base plate 250x250x16mm and 4 nos. Jtype En 8 grade foundation bolts M24X750mm to withstand 180 KM / HR wind speed considering the weight & dimension of One no. Solar lights fixed on the top of the bracket . The Pole must be suiable to withstand 180 KM/Hr wind speed by considering the weight and wind expose area of one no Semi Integrated Solar lights at a height of 6 mtr above ground .Both the Octagonal Pole and EN8 grade fdn bolts must be manufactuered by Octagonal pole manufacturing company. Brackets & EN8 fdn bolts manufactured in third party Supplier/manufacturer shall not be acceptable. Make : - Utkarsh/RR Ispat/Vakrangee) |
| 96 | Supply & Installation of 30 W AIO Solar street lights having 75 Wp or more highly efficient Monocrystalline PV module & 12.8 V 30 Ah or more ) Lithium Ferrophosphate (LiFePo4) Battery (BIS approved) which shall beinside the extruded aluminium luminaire housing (Theft retardant type), MPPT charge controller having > 92% efficiency & PIR Sensor. The initial lumen output of AIO street light shall be 4800 lumen or more in CCT 6000K (+/-500K) (Lumen efficacy of 160 lm/w ) as per LM 79 report ofNABL lab . The LED chip will be of OSRAM/NISCHIA/CREE/SEOUL Semiconductor only and should be with lenses for effective lighting distribution. The complete system & BMS should be designed to provide 2 days (24 Hrs) back up in dimming mode by activating PIR sensor and battery should be kept inside the luminaire and Mono Crystalline Panel (Made in India ) to be mounted on the top of the luminaire housing. The luminaire must be having IP 66 protection for critical component like (LED compartment, Driver compartment & Battery) . The AIO street light is having IK 08 .The luminaire should have the provision the tiltable/ adjustable mounting bracket to mount it on the top of the pole directly. Warranty on the AIO street lights must be 5 years . The following test reports/certifications must be submitted for the technical acceptance of the products .1. LM 79 REPORT NABL lab ) , 2. IK 08 (Report of NABL lab ), 3. IP 66 Report of NABL lab (Make: Panasonic/Havells/Crompton/Philips/wipro) |
| 97 | Supply & Installation 40 W AIO Solar street lights having 100 Wp or more highly efficient Monocrystalline PV module & 12.8 V 42 Ah or more ) Lithium Ferrophosphate (LiFePo4) Battery having BIS ) which shall be inside the extruded aluminium luminaire housing (Theft retardant type), MPPT charge controller having > 92% efficiency & PIR Sensor. The initial lumen output of AIO street light shall be> 6400 lumen or more in CCT 6000K (+/-500K) (Lumen efficacy of 160 lm/w ) as per LM 79 report of NABL lab . The LED chip will be of OSRAM/NISCHIA/CREE/SEOUL Semiconductor only and should be with lenses for effective lighting distribution. The complete system & BMS should be designed to provide 2 days (24 Hrs) back up in dimming mode by activating PIR sensor and battery should be kept inside the luminaire and Mono Crystalline Panel (Made in India ) to be mounted on the top of the luminaire housing. The luminaire must be having IP 66 protection for critical component like (LED compartment, Driver compartment & Battery) . The AIO street light is having IK 08 .The luminaire should have the provision the tiltable/ adjustable mounting bracket to mount it on the top of the pole directly. Warranty on the AIO street lights must be 5 years . The following test reports/certifications must be submitted for the technical acceptance of the products .1. LM 79 REPORT NABL lab ) , 2. IK 08 (Report of NABL lab ), 3. IP 66 Report of NABL lab .(Make: Panasonic/Havells/Crompton/Philips/wipro) |
| 98 | PHSupplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C. (a)110mm dia.U-PVC SWR pipes |
| 99 | (l)75mm dia.PVC SWR plain bend |
| 100 | (b)110mm dia.U-PVC P-trap |
| 101 | (c)110mm dia.U-PVC SWR Single junction door |
| 102 | (d)110mm dia PVC SWR Nahani trap without Jally |
| 103 | (f)110mm dia.U-PVC SWR Offset |
| 104 | (g)110mm dia.U-PVC SWR plain bend |
| 105 | (i)110mm dia.U-PVC SWR vent cowl |
| 106 | (j)125mm dia CP greatings |
| 107 | (k)75mm dia.U-PVC SWR pipes |
| 108 | (m)75mm dia.PVC SWR door bend |
| 109 | Supplying all materials,labour,T&P cutting holes through brick/stone masonry works including making good the damages in cm(1:4)for taking HCI/PVC pipe & fitting etc. all complete as per PH specification and direction of E.I.C. (b)250mm thick wall |
| 110 | Supplying all materials,labour,T&P and fixing water closet,squatting pan (Indian type W.C pan/Orissa pattern squatting pan)duly embedded in cc(1:5:10)using 4cm size hard granite metal including fixing a pair of vitreous china 250mmx130mmx30mm footrest etc all complete as per specification and direction of the E.I.C. (a)580mm size Orissa pan(Nycer/Cera/Hindware/Parryware) |
| 111 | Supplying all materials,labour,T&P and fixing wash down water closet(E.W.C)with integral 'S' or 'P' trap to the floor with wooden plug and CP screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C.(a)EWC with P & S trap plain (Nycer/Cera/Hindware/Parryware) |
| 112 | Supplying all materials,labour,T&P and fixing of plastic seat cover for EWC with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C. |
| 113 | Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C. (a)550mmx400mm size WHB(Neycer/Parrywear/Cerra/Hindware) |
| 114 | (b)Pedestrial for WHB(Neycer/Parrywear/Cerra/Hindware) |
| 115 | supplying all labour,T&P materials & fixing wash Kitcken Sink with CI/MS Brackets painted white including holes in walls and making good the damages etc. all complete as per PH specification and direction of E.I.C. (a)600mmx450mmx200mm Steel sink with 40mm dia c.p. west,west pipe and brackets. |
| 116 | Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C. (a)CP Soap holder |
| 117 | Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. (a)600mmx450mm Mirror |
| 118 | Supplying all materials,labour T&P and fixing standard size glass shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C. (a)(125x600)mm size glass-shelf |
| 119 | Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C. (a)CP towel rail |
| 120 | (a)CP Towel Ring |
| 121 | Supplying all materials,labour T&P and fitting and fixing 10 Ltrs capacity PVC LL flushing cistern with a pair of CI/MS brackets complete with fittings such as syphonic arrangement,15mm nominal size brass/PVC ball valve with polythene float,CP/Brass handle,unions and couplings for connection with inlet,outlet,over flow pipes,32mm dia PVC flushbend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C. (a)10 lit PVC L/L Cistern(Parry ware) |
| 122 | Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip no 4660 and frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board. and as per direction of the Engineer in charge. |
| 123 | Supplying all materials,labour,T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cm(1:1) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. (a)In Ground Floor |
| 124 | (b)In 1st Floor |
| 125 | Supplying all materials,labour,T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick CP(1:3)joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C. (a)In Ground Floor |
| 126 | (b)In 1st Floor |
| 127 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the E.I.C. (a) Initial lift up to 1.50m |
| 128 | (b)From 1.5m to 3.00m depth |
| 129 | Supplying all materials labour T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of E.I.C. ST |
| 130 | Supplying all materials,labour,T&P and providing cc(1:3:6) with 4cm size hard granite metal including watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per specification and direction of the E.I.C ST |
| 131 | Supplying all materials,labour,T&P and providing cc(1:1.5:3)with 12mm size HG chips including watering,curing and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. S.T. |
| 132 | Supplying all materials labour T&P and providing brickwork with KB bricks having crushing strength not less than 75kg/cm2 with dimensional tolerance +/-8% including watering,curing conveyance all materials to worksite payment of royality taxes etc. all complete as per specification direction of E.I.C. KB Brickwork in cm(1:4) F&P |
| 133 | Supplying all materials,labour,T&P and providing cement plaster on brick/stone work including watering, curring and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. 12mm thick CP in cm(1:3) |
| 134 | Supplying all materials labour T&P and providing cement punning for skirting including watering,curing, conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 135 | Supplying all materials labour T&P and providing rigid and smooth centering & shuttering for RCC works including falsework and dismantling them after casting including conveyance of all materials to worksite, payment of royality,taxes etc. all complete as per specification and direction of E.I.C. S.T. |
| 136 | Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting, bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 137 | Supplying all materials labour T&P and providing RCC(1:1.5:3)using 12mm hg chips for RCC works including hoisting,laying,watering,curing,conveyance of all materials to work site,payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 138 | Supplying all materials labour T&P and fixing of RCC baffle wall precast with cc(1:1.5:3)using 12mm bhg chips and fitted to septic tank as per P.H. specification and direction E.I.C. |
| 139 | Supplying all materials labour T&P and Providing cement flush pointing(1:3) to brick masonary including watering,curing,conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C. |
| 140 | Supplying all materials,labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C. |
| 141 | Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB Brickwork in cm(1:6)moulding and shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside,cement flushpointing(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size h.g. chips with RCC man hole cover,e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C. (a)Inside size500mm x500mm x 460mm |
| 142 | (b)Construction of Gully Trap Chamber (0.25 x 0.25 inside Size) |
| 143 | Supplying all materials, labour, T&P and laying in trenches PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C. 110 mm dia PVC pipe line (Allround) |
| 144 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast R.C.C rings joined loose gravel backing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. (a)Soak way Pit 1.20m dia x 2.00m Deep (Inside Size) |
| 145 | Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (a)2000 lits capacity on the roof of 1st floor |
| 146 | Supplying all material,labour,T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to IS:15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts,including hoisting upto a height of 5mtr above GL & placing the tank in required position including conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per PH specification and direction of the E.I.C. (a)2000 lits capacity on the roof of 1st floor |
| 147 | Supplying all materials,labour,T&P and providing&fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C. (a)20mm dia C-PVC Pipe(Internal) |
| 148 | (b)25mm dia U-PVC Pipe(External) |
| 149 | Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C. (a)In Ground Floor |
| 150 | (a)In 1st Floor |
| 151 | Supplying all materials,labour,T&P and cutting holes in RCC,floors,roof,etc.upto 19cm thick for passing GI/PVC pipes and fitting etc. and repairing the holes after insertion of pipes etc. with cc(1:2:4)including finishing complete so as to make it leak proof as per direction of E.I.C. (a)In Ground Floor |
| 152 | Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C. (a)In Ground Floor |
| 153 | (a)In 1st Floor |
| 154 | Supplying all materials,labour,T&P and fixing brass/CP fittings of thefollowing nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C.(Plaza/amber/equivalent ) (a)15mm dia CP SB Bib cock |
| 155 | (j)15mm dia CP Flange |
| 156 | (b)15mm dia CP(LB) Bib cock |
| 157 | (c)15mm dia CP Two way Bib cock |
| 158 | (d)15mm dia CP Angle stop cock |
| 159 | (e)15mm dia CP Pillar stop cock |
| 160 | (f)15mm dia CP Concealed stop cock |
| 161 | (g)15mm dia CP Revolving Shower with shower Arm |
| 162 | (h)15mm dia Health Faucet & 1.0m long Flexible pipe |
| 163 | (i)25mm dia PVC F.W.V. |
| 164 | 1.00HP Single Phase Submersible Pump Set Supplying all materials,labour,T&P and fitting and fixing of ISI mark 1.0HP single phase vertical water cool submersible pump set with discharge 1800/2200Lit/Hour & a head-55/70mtr.of reputed make(CRI/ KSB/Texmoor Equivelent) Including cost conveyance and taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 165 | Supplying all materials,labour,T&P and fitting&fixing of 1.0HP single phase vertical submersible pump set with commissioning and testing etc. all completes as per P.H. Specification and direction of E.I.C. |
| 166 | Supplying all materials,labour,T&P and fitting & fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.0HP single phase vertical submersible pump set including all cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 167 | Supplying all materials,labour,T&P and fitting & fixing of (2.5mm)2 3core copper flat suitable cable having ISI mark of reputed company like BCH/Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 168 | Supplying fitting and fixing of plastic rope MS well cover,MS clamp,stainless steel short piece,bend & socket including all cost,taxes etc all complete as perdirection of the E.I.C. |
| 169 | Supplying fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C. |
| 170 | Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. |
| 171 | Supplying all materials, labour ,T&P and laying in trenches HDPE of the following nominal bore and pipe fittings including testing etc all complete as per direction of the E.I.C. |
| 172 | Sinking of 125mmx100mm Size Bore Well Through DTH Method:- Labour for drilling of perfactly vertical bore holes as specified dia.For a specified depth below GL level through consolidated and uncosolidated rock with down the hole hammer drilling rigs or combination drilling rigs(600cfm/200psi)as required to suit the site conditions as per the direction of E.I.C.including use of own rigs with its accessories,tools & plants and consumable etc. for lowering 125mm dia PVC/ GI pipes for house fitted with socket and with or without well screen as per the necessity for the soft, medium,hard & boulder formation(PCV/GI)casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after complete of tube well.(Tube well-1No) (a)Drilling of 125mm. dia. Bore-0.00mtr to 30mtr |
| 173 | (b)Drilling 100mm dia. Bore-30mtr to 100.00mtr and above |
| 174 | Lowering the following G.I/PVC pipe with or without soltted pipes as per necessity from ground level upto 30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing materials,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/G.I) supplied by the contractor (including cost of pipe) (a)Lowring of 125mm dia pipes-0.00mtr to 30.00mtr |
| 175 | (b)Cost of 125mm dia PVC casing pipes-0.00m to 30.60m |
| 176 | Cleaning&developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C. |
| 177 | Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge. porcelain Halfstall Magnum Urinal(Parryware/Hindware/Neycer) |
| 178 | 15mm dia Urinal spreder |
| 179 | 32mm dia cp wate Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender