Tender For Special Repairs To Compound Wall And Rest Room Of Section Office In Pappireddipatti Taluk Of Dharmapuri District.
Tender Value
4.85 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
11 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dharmapuri → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Compound Wall And Rest Room Of Section Office In Pappireddipatti Taluk Of Dharmapuri District.
BOQ
| Sl. No. | Item Description |
| 1 | Brick work in following Cement Mortar using best quality II class Ground moulded chamber burnt bricks of size 9\\" x 4-3/8\\" x 2-3/4\\" for foundation and basement including curing, etc., complete complying with standard specifications and as directed by the departmental officers. |
| 2 | Brick partition walls of 11.50cm thickness using best quality II class Ground moulded chamber burnt bricks of size 9\\" x 4-3/8\\" x 2-3/4\\" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete complying with standard specifications and as directed by the departmental officers. |
| 3 | Plastering with Cement Mortar 1:5 (One cement and Five M.sand), 12mm thick in all floors including curing etc. complete complying with standard specifications and as directed by the departmental officers. |
| 4 | White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specifications and as directed by the departmental officers. |
| 5 | Colour washing two coats in all floors using best freshly burnt white shell lime and best quality of approved variety of colouring pigment including cost of lime, colouring pigments, fevicol type gum, brushes, scaffolding charges etc., |
| 6 | Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete complying with standard specifications and as directed by the departmental officers. |
| 7 | Painting iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specifications and as directed by the departmental officers. |
| 8 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm \\"P\\" or \\"S\\" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications and as directed by the departmental officers. |
| 9 | Supplying and fixing in position best quality and approved make Indian made white glazed earthern ware wash hand basin of size 550x400mm white color of approved brand and quality including cost of cast iron brakets 15mm.dia brass CP pillar tap 30mm.dia \\"B\\" class GI waste pipe 30mm.dia CP brass waste coupling with rubber plug and chain, 50mm.brass nipple 15mm.dia nylon connection including fixing of wash basin in the wall in position with a pair of CI brakets with TW plugs and screws, rubber washers, white led and giving necessary water supply connection and painting the brakets with a two coat of painting over a priming coat of anti corrosive paint including testing for leakages etc.,complete complying with standard specifications and as directed by the departmental officers. |
| 10 | Supplying and fixing in position best quality UPVC Pipes (having 10 kg / sq.cm) of approved quality and best best variety conforming to BIS of the following dia including cutting and threading and fixing UPVC specials UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, UPVC clamps and screws making holes on the walls (or) drilling holes in the roof and making good the dismantled portions to original condition with necessray brick work / cement concrete and plastering neatly. wherever necessry with necessary scaffolding charges upto 4metre height above ground level, etc.,complete complying with standard specifications and as directed by the departmental officers. |
| 11 | 25 mm dia UPVC Pipe |
| 12 | 40 mm dia UPVC Pipe |
| 13 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc. complete complying with standard specifications and as directed by the departmental officers. |
| 14 | 110 mm dia PVC Pipe |
| 15 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications and as directed by the departmental officers. |
| 16 | 110 mm dia PVC Bend |
| 17 | Supplying and fixing of PVC Screw Down Tap Heavy Type 20mm dia etc., complete complying with standard specifications and as directed by the departmental officers. |
| 18 | 40mm dia UPVC Elbow |
| 19 | 25mm dia UPVC Elbow |
| 20 | 25mm dia UPVC Tee |
| 21 | 50mm dia UPVC Vent Cowl |
| 22 | Supplying and fixing of PVC Screw Down Tap Heavy Type 20mm dia etc., complete complying with standard specifications and as directed by the departmental officers. |
| 23 | Supplying and fixing of CP Two Way Bib Cock with Health Faucet etc., complete complying with standard specifications and as directed by the departmental officers. |
| 24 | Supplying and fixing position CI Nahani Trap / Floor Trap of 100x75 mm sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specifications and as directed by the departmental officers. |
| 25 | Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specifications and as directed by the departmental officers. |
| 26 | Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three crushed stone Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specifications and as directed by the departmental officers. |
| 27 | Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specifications and as directed by the departmental officers. |
| 28 | Supplying and fixing colour galvalume sheet roof of 0.47mm thickand steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories etc., complete complying with standard specifications and as directed by the departmental officers. |
| 29 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications and as directed by the departmental officers. |
| 30 | Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws,etc., complete complying with standard specifications and as directed by the departmental officers. |
| 31 | Colour washing One coats in all floors using best freshly burnt white shell lime and best quality of approved variety of colouring pigment including cost of lime, colouring pigments, fevicol type gum, brushes, scaffolding charges etc., complete complying with standard specifications and as directed by the departmental officers. |
| 32 | Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specifications and as directed by the departmental officers. |
| 33 | Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specifications and as directed by the departmental officers. |
| 34 | Supplying and laying of Interlocking Paver Block Stone 60mm thk. Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc., complete complying with standard specifications and as directed by the departmental officers. |
| 35 | Random rubble masonry in cement mortar 1:4 (one cement and four sand) mixed using mixer machine using new hard rough stone and bond stones for various depth and height below and above ground level with all leads and lifts including simultaneous flush pointing the exposed surface with same mortor and with all incidental charges such as scaffolding and dewatering by baling pumping and diverting water wherever required finishing curing complete so as to attain the profile and strength in the drawing and specification including providing shrinkage ,construction joint for closing the days work at intervals specified whereever required etc., complete complying with standard specifications and as directed by the departmental officers. |
| 36 | GST@18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender