Tender For Providing Internal And External Electrification For Arulmigu Chithambareswarar And Amman Temple, Chettiyapathu, Tiruchendur Taluk In Thoothukudi District
Tender Value
23.32 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
15 days left
EMD
22000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuticorin → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Internal And External Electrification For Arulmigu Chithambareswarar And Amman Temple, Chettiyapathu, Tiruchendur Taluk In Thoothukudi District
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing of 2\\" x 1\\" Teakwood reeper on wall along with run of 50mm X 20mm UPVSC casing caping cable trunking box with necessary clamps and screws rigidly in the gap of the stone wall. |
| 2 | Supply and fixing of 2\\" x 1\\" Teakwood reeper on wall along with run of 50mm X 50mm UPVSC casing caping cable trunking box with necessary clamps and screws rigidly in the gap of the stone wall. |
| 3 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) 5 points / coils Higher End. |
| 4 | Supply and fixing of single box type 4'20W LED fitting with TW round blocks on wall or ceiling with with PVC unsheathed copper leads from terminals to the fitting (LED fittings should be of Higherend company make like philips / cromption etc) . |
| 5 | Supply and fixing of Havells Low bay 50W LED Fitting with MS Clamp set with bolt and nut and tube suspended with SS chain 32mm width with the end hooks with PVC unsheathed copper leads from terminals to the fitting. |
| 6 | Supply and fixing of flood light 100W LED fitting with necessary wall grouting clamps with fixing bolts on the ceiling with PVC unsheathed copper leads from terminal to the fitting. |
| 7 | Supply and fixing of 9W LED Bulb for BH point. |
| 8 | Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting. |
| 9 | supply and fixing of 65 mm dia. (2 -1/2\\") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour . |
| 10 | Supply and fixing of 450MM 18” Almonard Wall Fan with Stainless steel bracket suitable for for fixing the wall fan in the existing stone piller on wall with connection. |
| 11 | Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box (Plastic ) with module cover plate (plastic) on wall with connections. Higher End. |
| 12 | Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End. |
| 13 | Supply and fixing of 8 module surface mounting box with combined cover plate plastic fixed with 6nos 6A 1 way switch and 1no 6A Universal Plug with connections. |
| 14 | Supply and fixing of 12 module surface mounting box with combined cover plate plastic fixed with 8nos 6A 1 way switch and 2nos 6A Universal Plug with connections. |
| 15 | Supply and fixing of 450mm (18\\") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall. |
| 16 | Supply and fixing of louvers shutters arrangements for 450mm (18\\") sweep (light duty) AC exhaust fan |
| 17 | Supply and fixing of 20A DP MCB Switch in suitable 2 pole sheet steel enclosure with earth connection. |
| 18 | Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End. |
| 19 | Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End. |
| 20 | Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2feet x 1-1/2 feet using angle iron of size 1-1/2\\" x 1-1/2\\" x 1/4\\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos. 63A fuse units (500V), 1No. neutral link, copper earth flat of size 1\\" x 1/4\\" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with 1No 63 Amp 30MA Four Pole RCD/RCCB (Higher End) withsuitable necessary connection with earth connection complete. |
| 21 | Supply and fixing of 63A MCCB Switch in suitable 4 pole sheet steel enclosure on wall with earth connection . |
| 22 | Supply and fixing of 63A TPNMC switch with suitable angle iron frame work with MS cable entry boxes with earth connection only(SD 150) |
| 23 | Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only. |
| 24 | Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in existing UPVSC casing caping pipe on wall and ceiling with connections. |
| 25 | Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour. |
| 26 | Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour. |
| 27 | Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection by 16 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour. |
| 28 | Supply and Laying of 2 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 29 | Supplying and clamping of 2 x 16 Sqmm PVC LTUG armoured cable on post or on wall with MS clamps. |
| 30 | Supply and fixing of brass cable gland for 2 x 16 sq.mm. PVC armoured LTUG cable with earth connection. |
| 31 | Supply and clamping of 3-1/2 x 35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. |
| 32 | Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection |
| 33 | Supply and fixing of 8\\" x 6\\" PVC synthetic box with 4 way connector for cable connection. |
| 34 | Supply and fixing of 65mm (2.5\\") dia G.I Pipe(class-B) of 6 mts length with 300mm x 300mm x 6mm base plate duly welded at the bottom with Concreting with Construction of masonary pedestal with necessary clamps to hold the LTUG Aluminium Service Cable with painting of suitable colour. |
| 35 | Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection. |
| 36 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. |
| 37 | GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender