S&T work in connection with closure of LC gate no. SK-24 of NLV station in RNY division.

Sharing tender

Tender for S&T Work In Connection With Closure Of Lc Gate No. Sk-24 Of Nlv Station In Rny Division. , - Modification/Alteration In Existing Ei (Electronic Interlocking) As Per Latest Rdso Guidelines/Tan. It Includes: Design And Modification In Existing Interface And Interlocking Circuits And Logic Of Ei System Including Modification In The Vdu (Video Display Unit)/ Lcp (Local Control Panel)/ Ccip (Control Cum Indication Panel), Maintenance Terminal (Mpc), Data Logger, Relay Rack Wiring. The Complete Work Should Comply With The Latest Rdso Specifications And Guidelines And As Per Approved Sip And Circuit Diagrams. All The Material (Interface Cards/ Relays/ Wiring Material/ Connectors/ Fuses/ Communication Devices Etc.) Shall Be Provided By The Contractor. The Work Also Includes The Supply Of Modified Selection Table/Rcc, Interface Circuits, Vdu/Lcp/Ccip Diagram Etc. To Suit The Modified Sip. It Also Includes The Carrying Out Of Fat, Sat/Second Fat (As Applicable) Jointly With Railways And Satisfactory Commissioning Of Complete System. All Plans/Drawings/Circuits Etc. Should Be Prepared On Autocad, Softcopy To Be Supplied On Pen Drive And 06 Sets Of Hard Copies Also To Be Supplied. , - Design Of Circuits In Connection With Preparation Of Wiring Diagrams As Per Approved Signalling Plan And Submission Of Indoor As Well As Outdoor Completion Documents For Alteration Work. It Includes Route Section Plan (Rsp), Selection Table (St)/Route Control Chart(Rcc), And Control Panel Diagram (Cpd)/Vdu Diagram. Two Copies Of Prints With Soft Copy Will Be Submitted To Railway For Checking. If Alterations Are Suggested/Proposed By Railways, Then Again Two Copies Of Prints Will Be Submitted For Advance Approval After Carrying Out All The Alterations As Suggested/Proposed By The Railways. Tracings Will Be Submitted For All The Diagrams Mentioned Above For The Purpose Of Approval By Railway Prior To Commissioning Of Station. All Drawings Will Be Prepared In Cad. The Wiring Diagrams Will Consist Relay Rack Analysis, Relay Contact Analysis, Fuse Details. Tag Block Analysis Etc. A Separate Hard Drive/Pen Drive Will Be Submitted To Railway For Each Station Along With Original Tracings. It Also Includes Preparation And Supply Of Laminated One Set Of All Completion Plans Including Circuit Diagrams And Indoor As Well As Outdoor Completion Documents On Standard 75-Micron Polyester Film/Print Copy For Station In Auto Cad. 6 (Six) Sets Photo Copies Will Be Submitted For Each Of The Documents Mentioned Below: Cable Route Plan (Station Section/Block Section As Applicable), Cable Core Chart, Location Details Plan For All The Locations, Cable Termination Details, Signalling Plan, Swr Diagram, Wiring Diagrams, Selection Table/Route Control Chart(Rcc), Contact Analysis, Fuse And Tag Block Analysis Of Relay Rack And Ct Rack, Control Cum Indication Panel, Vdu Diagram, Power Panel Diagram, Track Circuit Plan, Track Bonding Plan,Wiring Diagram Along With All Logic Details & Interface Circuit Relay Disposition Chart Contact Analysis And Fuse Particulars. Panel Termination Chart Ct Rack Particulars Input & Output Bit Chart Floor Plan For Relay Room, Battery Room, Power Eq. Room, Etc. Power Supply Diagram Along With Load Calculation Calculation Earthing Diagram. Rack Erection Plan And Junction Box Details Etc As Per Technical Specification.Goomty/Oc/End Cabin Details (Including Relay Disposition Charge, Contact Analysis, Fuse Particulars, Ct Rake Particulars And Floor Plan Etclocation Box Details (Including Contact Analysis, Fuse Particulars Etc.)Other Drawing As Mentioned In Tender Documents.Note: All Necessary/Requisite Drawing For Ei Is To Be Submitted As Per The Standard Nfr Practise. , - Designing, Preparation And Plotting Of Signalling Interlocking Plan (Sip), Pd/Vdu Diagram, Rcc In Autocad. Two Copies Of Prints With Soft Copy (In Pdf As Well As Cad Files) Will Be Submitted To Railway For Checking. If Alterations Are Suggested/Proposed By Railways Then Again Two Copies Of Prints Will Be Submitted For Advance Approval After Carrying Out All The Alterations As Suggested/Proposed By The Railways. Tracings Will Be Submitted For All The Diagrams Mentioned Above For The Purpose Of Approval By Railway Prior To Commissioning Of Station. Final Documents (Sip, Pd/Vdu Diagram, Rcc) To Be Submitted In Softcopy In Autocad And Pdf Format Along With With Six Print Copies Of Each Document. The Scope Of Work Includes Subsequent Modification And Revision In Sip, Pd/Vdu Diagram, Rcc Till Commissioning Of Projects. , - Dismantling Of Released Material And Transporataion Along With Surplus Materials Upto Consignee Godown By Truck Of Min 10 Ton Capacity Including Loading & Unloading As Per Technical Specification. , Of Item