Tender For Repairs/Replacement Of Steel Door, Windows, Gates, Rolling Shutter, Collapsible Gates And Other Allied Services Under Age B/R-I Of Ge(Nd) Visakhapatnam.
Tender Value
48 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
20 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs/Replacement Of Steel Door, Windows, Gates, Rolling Shutter, Collapsible Gates And Other Allied Services Under Age B/R-I Of Ge(Nd) Visakhapatnam.
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I: B/R WORKS |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwiseprovided for all as specified and as directed. |
| 3 | S&F framed work such as grills grating, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to FE 290, Gde E-165 complete all as specified and as directed upto 4th floor. |
| 4 | Taking down chowkats or frames not exc 1.5 sqm each without taking off shutters from the frameupto 4th floor. |
| 5 | Taking down chowkats or frames exc 1.5 sqm but not exc 4 Sqm each without taking off shutters from the frame upto 4th floor. |
| 6 | Taking down shutters of any description n. exc 1 sqm each and refixing in same opening upto 4th floor. |
| 7 | Taking down shutters of any description exc 1sqm but n.exc 2 sqm each and refixing in same opening upto 4th floor. |
| 8 | M&L for Plain Cement Concrete Type C1 1:3:6 (using 20mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work upto 4th floor. |
| 9 | S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints upto 4th floor. |
| 10 | S&F 30 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass etc all as per clause 8.24 (b) of SSR Part I 2009 upto 4th floor. |
| 11 | S&F 75mm long medium weight MS butt hinges |
| 12 | S&F 100 mm aluminium handles, cast type anodised |
| 13 | S&F 100 mm aluminium anodised barrel tower bolt of extruded section |
| 14 | S & F to Chowkats 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters shall be as specified in SSR Part I, Section 8, Clause 8.24 (a) upto 4th floor. |
| 15 | S&F 35mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter with lock rail and panel of 9mm BWP Commercial ply or 12mm veneered particle board with commercial face veneers on both faces all as per clause 8.24 (a) of SSR Part I 2009 upto 4th floor. |
| 16 | S&F factory made solid fixed ventilator of size 50x47mm made out of extruded 5mm thick PVC sheet mitred cut at two corners and joined with 2Nos of 150mm long brakets of 15x15mm MS square tube, the two vertical porfiles are to be reinforced with 19 x 19 mm MS tube and 50% of portion is fixed with 3 mm thick pin headed/frosted glass and remaining portion is covered with wire mesh and 3 mm thick pin headed/frosted glass louvers including 12mm dia MS guard bars and necessary fixtures upto 4th floor. |
| 17 | M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer upto 4th floor. |
| 18 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing up to 4th floor. |
| 19 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width inside upto 4th floor. |
| 20 | S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed upto 4th floor. |
| 21 | S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed upto 4th floor. |
| 22 | S&F stainless steel butt hinges medium weight 125 mm long for PVC doors upto 4th floor |
| 23 | S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section upto 4th floor |
| 24 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised upto 4th floor |
| 25 | S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring Fixed in floor upto 4th floor. |
| 26 | S & F 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy upto 4th floor. |
| 27 | S& F in repairs rubber beading 50 mm wide and 5 mm thick |
| 28 | S&F 100 mm long medium weight MS butt hinges |
| 29 | Hacking out old broken glass (any thickness size quality or description) from wooden , steel or aluminium frames glazed with putty or fixed with wooden beads complete all as directed |
| 30 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares n.exc 0.5 sqm in each pane |
| 31 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares exc 0.5 sqm in each pane |
| 32 | Taking down rolling shuttes/ collapsible gates |
| 33 | Repairs to collapsible gate as in remove and replacement of worn out minor parts such as rivets, rollers, wheels, straightening of vertical channels and cleaning of rust refixing in the same position and making good the disturbed portion, greasing, oiling etc, complete all as specified directed by Engineer in charge. |
| 34 | S&FCollapsible steel gates, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete |
| 35 | Labour only for repair and servicing of rolling shutter of area not exc 20Sq.M and removing of wom out components such as hood cover, laths, ball bearings, helical wire spring lock plates, brackets, plates, straightening of existing laths at required places including greasing re-fixing in the same location and also painting as directed by Engineer-in- charge. |
| 36 | Supply only lock plate (width 125 mm made out of MS sheet 3.15 mm thick welded with MS angle 35 x 35 x 3 mm at the bottom and shall be fittef with MS sloding flat, interior and exterior sides of lock plates all as directed by Engr-in-charge. |
| 37 | Supply only gear mechanically operated system with spur wheel gear worm wheel and bevel gear box with handle for free movement of rolling shutters all as directed by Engg-in-charge |
| 38 | Supply only MS hood cover of 1.00 mm thick CRCA sheet to the rolling shutter for various opening all as directed by Engineer in charge. |
| 39 | Supply only MS guide channel of 3.15mm thick and 65 mm wide for rolling shutters as required at site and all as directed by Engineer in charge. |
| 40 | M&L two coats of aluminium paint on steel surfaces over a coat of zinc chrome primer including prpeparation of new surfaces over 10 cm width or girth all as specified |
| 41 | M&L for appling a coat of Synthetic enamel paint over old painted steel surfaces over 10 cm width or girth all as specified. |
| 42 | M&L for appling a coat of aluminium paint over old painted steel surfaces over 10 cm width or girth all as specified. |
| 43 | S&F rolling shutters with ball bearings as specified including top cover anchoring rod haspand staple and one shop coat of primer errected in position as indicated complete push pull or manual type thickness of shutter laths in 1.25 mm including safety locks mild steel with 4 levers for rolling shutter |
| 44 | supply only 450 mm long helical wire spring of 7 mm dia wire for rolling shutters |
| 45 | supply only 300 mm long helical wire spring of 6.8 mm dia wire for rolling shutters |
| 46 | supply only ball bearing of size 50 mm (inner dia) |
| 47 | supply only ball bearing of size 65 mm (inner dia) |
| 48 | M&L replacing the existing guide rails of the collapsible gates including fixing back the shutters to walls including making the good the disturbed portion etc all as specified and directed by Engineer-in- charge. |
| 49 | Repairs to steel gates/steel doors/sliding doors by straighting the bent portion and broken parts with welding and gas cutting including greasing all as directed by Engineer-in- charge. Incorported items will be measured seperatly. |
| 50 | S&F MS pipe light grade of 50 mm dia bore with necessary holes for shaft all as specified and as directed by Engineer-in- charge. |
| 51 | S&F in repairs 1.25 mm thick plain GI sheet fixed in vally gutters including taking the existing sheets and re-fixing the new sheet same in position and making the joints leak proof all as specified and as directed by Engineer-in- charge. |
| 52 | Supply only MS angles /pipes for welding for gates as directed by Engineer-in- charge. |
| 53 | Supply only 3 mm thick MS sheets welding for gates as directed by Engineer-in- charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender