Civil Aviation Boards / Undertakings / PSU Closing in 19 days TDR #57884310

Bids Are Invited For Annual Operation And Maintenance Of Ground Lighting Facilities Including Supply Of Glf Spares At Jabalpur Airport (Year 2026-28).

Issued by Boards / Undertakings / PSU · Jabalpur, Madhya Pradesh
Tender Value
2.41 Crore
Estimated cost
Bid Submission
26 Oct 2026
19 days left
EMD
7.25 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
105515

Project Description

Bids Are Invited For Annual Operation And Maintenance Of Ground Lighting Facilities Including Supply Of Glf Spares At Jabalpur Airport (Year 2026-28). 1 Operation & Maintenance Of All Electrical Installations Of Glf System In Operational Area And Ccr Hall, Perimeter Lighting, Dvor, Localizer, Glide Path, Old Power House, Cisf Barracks Etc. As Per The List Of Installations Available In Tender Documents Appendix-A By Deploying Adequate Man Power As Mentioned In Additional Terms & Conditions Of Contract Complete As Per Terms & Conditons Of Contract Etc. As Required. Highly Skilled-1 Skilled-10 Un-Skilled-11 2 Supply Of Spare Pcb Cards For 30/15/10/7.5/5/4/2.5 Kw, 6.6 Amp, Microprocessor Type Ccr (Nasu Make) Complete Etc. As Required. Main Control Card. 3 Supply Of Spare Pcb Cards For 30/15/10/7.5/5/4/2.5 Kw, 6.6 Amp, Microprocessor Type Ccr (Nasu Make) Complete Etc. As Required. Power Supply Plus Driver Card 4 Supply Of Spare Pcb Cards For 30/15/10/7.5/5/4/2.5 Kw, 6.6 Amp, Microprocessor Type Ccr (Nasu Make) Complete Etc. As Required.Ttm Card (Set Of 02 Cards ) 5 Supply Of Spare Pcb Cards For 30/15/10/7.5/5/4/2.5 Kw, 6.6 Amp, Microprocessor Type Ccr (Nasu Make) Complete Etc. As Required.Output Pt 4000V / 10 Volts. 6 Supply Of Spare Pcb Cards For 30/15/10/7.5/5/4/2.5 Kw, 6.6 Amp, Microprocessor Type Ccr (Nasu Make) Complete Etc. As Required.Thyristor 250 Rk 160 7 Supply Of Spare Pcb Cards For 30/15/10/7.5/5/4/2.5 Kw, 6.6 Amp, Microprocessor Type Ccr (Nasu Make) Complete Etc. As Required.Ti - 300 Fuse 8 Supply Of Spare Pcb Cards For 30/15/10/7.5/5/4/2.5 Kw, 6.6 Amp, Microprocessor Type Ccr (Nasu Make) Complete Etc. As Required.Tr - 7 Transformer Primary 415 9 Service/Emergency Visit By Service Engineer For Repairing/Rectification Including Calibration Of All 30 Kw To 2.5 Kw Mpccr Within 48 Hours Of Intimation Of Complaint And Rectification Of The Fault As When Required.(Spare Will Be Provided By Aai)(The Inventory Of The Ccrs As Mentioned At Page No. Appendix-A Of Scc) 10 Annual Maintenance Contract Of Alcms & Related Systems Including Trouble Shooting, Repairing Of Control Cards Servicing Of Alcms System By Repair Or Replacement Of Defective Components & Hardware Such As Touch Screen, Plcs, Desktop Pc, Vault Processor, Associated Components, Providing Software Programming / Re-Programming Support For Rectification, Carrying Out Routine / Preventive Maintenance During Visit On Half Yearly/ Emergency Visit Basis & Providing Full Support & Telephonic Guidance During Breakdown Etc. For Rectification As & When Required To Keep The System In Acceptable Functional And Serviceable Condition As Per Terms & Conditions Of Contract . (This Work Should Be Carried Out Through Oem.All Hardware Components Required For Servicing Of Alcms Will Be In Scope Of Aai).(For 1St Year) 11 Annual Maintenance Contract Of Alcms & Related Systems Including Trouble Shooting, Repairing Of Control Cards, Servicing Of Alcms System By Repair Or Replacement Of Defective Components & Hardware Such As Touch Screen, Plcs, Desktop Pc, Vault Processor, Associated Components, Providing Software Programming / Re-Programming Support For Rectification, Carrying Out Routine / Preventive Maintenance During On Half Yearly/ Emergency Visit Basis & Providing Full Support & Telephonic Guidance During Breakdown Etc. For Rectification As & When Required To Keep The System In Acceptable Functional And Serviceable Condition As Per Terms & Conditions Of Contract . (This Work Should Be Carried Out Through Oem. All Hardware Components Required For Servicing Of Alcms Will Be In Scope Of Aai).(For 2Nd Year) 12 Supply Of Male ,Female Connector Suitable Form 2.5 Sqmm Secondary Lead For Extended Runway Fitting Complete As Per Site Requirement. 13 Supply Of 5 Kv Grade Plug And Receptacle Of Type I Class B Connector Suitable For Field Attachment With 5 Kv Grade Pvc Insulated Pvc Sheathed Single Core Screened Copper Conductor Cable Of Following Size Conforming To The Relevant Is / Technical Specifications Etc. Complete As Required. (1 X 6 Sqmm) 14 Supply Of 150 W, 6.6 Amps Bi-Pin Halogen Lamps Suitable For Ama Make Elevated Runway Light Fixtures Etc. As Required. 15 Supply Of Bi-Pin Holder For 200/ 150/45 W Halogen Lamp Suitable For Ama Make Elevated Runway Light Fixtures Etc. As Required. 16 Supply Of Converter For Glf Signages That Can Be Operated From Both Circuits A & B Along With Provision Of Auto Changeover From One Circuit To Another And Suitable For Existing Signages Installed At Site Etc. Complete As Required. 17 Supply Of Faa And Icao Compliant Blue Led Module Suitable For Ama Make Medium Intensity Elevated Omni Directional Taxi Way Edge Light Fixture, 6.6 Amps With Driver With All Accessories Etc. Complete As Required. 18 Supply Of 200 W, 6.6A, Single Ended Bi-Pin Halogen Lamp Suitable For Use In Ama Make Airfield Lighting Fittings (Similar To Osram Make Cat. No. 64386 Or Philips/Narva Make Cat. No. 58373) Etc. Complete As Required. 19 Supply Of 105W, 6.6A, Prefocus Dichroic Coated Reflector Lamp Suitable For Use In Adb Safegate Make Inset Airfield Lighting Fixtures (Similar To Osram Make Cat. No. 64339A Or Philips/Narva Make Cat. No. 58308) Etc. Complete As Required. 20 Supply Of Terminal Block Assembly With Fixing Hardware (Part Ref, E1) Suitable For Adb Safegate Make Inset Light Fixtures Etc. Complete As Required. 21 Supply Of Mirror Finish Aluminium Reflector Suitable For Ama Make Papi Unit Installed At Site To Meet Icao/Car Specifications Complete With All Accessories Etc. As Required. 22 Supply Of Mirror Finish Aluminium Reflector Suitable For Ama Make Elevated Approach / Threshold / End Light Fixtures Installed At Site To Meet Icao/Car Specifications Complete With All Accessories Etc. As Required. 23 Supply Of Green Spreader Lens / Refractor Front Glass Suitable For Ama Make Apn Type Runway Threshold Light Fixtures Installed At Site To Meet Icao/Car Specifications Complete With All Accessories Etc. As Required. 24 Supply Of Red Spreader Lens / Refractor Front Glass Suitable For Ama Make Apn Type Runway End Light Fixtures Installed At Site To Meet Icao/Car Specifications Complete With All Accessories Etc. As Required. 25 Supply Of Clear Spreader Lens / Refractor Front Glass Suitable For Ama Make Apn Type Approach Light Fixtures Installed At Site To Meet Icao/Car Specifications Complete With All Accessories Etc. As Required. 26 Supply Of Quick Connect Plug Connector (M) Kit For Ocem Sequence Flashing Light Ffu / Lefl Lights Complete With All Accessories Etc. As Required. 27 Supply Of Ht Tape Roll Having Size 25 Mm (W) X 9 M (L) Etc. As Required. 28 Rewinding, Repairing And Overhauling Of Following Types Of Fans By Using Suitable Gauge Enamel Copper Wire, Replacement Of Bearing (If Required), Baking, Oiling, Greasing, Assembling, Testing, To & Fro Transportation Etc. As Required. I/C Less For Dismantle Wire. Ceiling Fan Of All Sizes 29 Rewinding, Repairing And Overhauling Of Following Types Of Fans By Using Suitable Gauge Enamel Copper Wire, Replacement Of Bearing (If Required), Baking, Oiling, Greasing, Assembling, Testing, To & Fro Transportation Etc. As Required. I/C Less For Dismantle Wire. Exhaust Fan Up To 450 Mm Dia 30 Dehydration And Filtration Of Transformer Oil At Site By Bringing The Dehydration/ Filtration Machine At Airport Including Testing Oil For Bdv And Acidity Before And After Dehydration And Filtration, Submission Of Test Report As Required For 02 Nos 500 Kva, 33/0.433 Kv Transformers Etc. Complete Job As Required.The Agency Shall Ensure That The Test Report After Dehydration Is In Accordance With The Relevant Standards And Statutory Requirement (For 1St Year) 31 Dehydration And Filtration Of Transformer Oil At Site By Bringing The Dehydration/ Filtration Machine At Airport Including Testing Oil For Bdv And Acidity Before And After Dehydration And Filtration, Submission Of Test Report As Required For 02 Nos 500 Kva, 33/0.433 Kv Transformers Etc. Complete Job As Required.The Agency Shall Ensure That The Test Report After Dehydration Is In Accordance With The Relevant Standards And Statutory Requirement (For 2Nd Year) 32 Supply And Top-Up Of New Transformer Oil Compliant With Is, 335,1993 In 500 Kva, 33/0.433 Kv Rating Transformer Including Submission Of Test Certificate Etc. Complete As Required. 33 Testing And Calibration Of Gec Alstom Make Idmt Relays Of Type Cdg-31 Installed In Ht/Lt Panel (02 Oc +01 Ef Relay) With Relay Testing Kit At Airport Site And Submitting The Test Reports Complete Etc. As Required. (For 1St Year) 34 Testing And Calibration Of Gec Alstom Make Idmt Relays Of Type Cdg-31 Installed In Ht/Lt Panel (02 Oc +01 Ef Relay) With Relay Testing Kit At Airport Site And Submitting The Test Reports Complete Etc. As Required. (For 2Nd Year) 35 Overhauling, Servicing & Testing Of L&T Make Acbs Having Capacity 800 A By Oem Or Their Authorized Service Dealer As Per Manufacturers Reccomendations Including Supply Of Maintenance Kit Comprising Grease, Cleaner, Dusters, Scrubbers Etc.Complete As Required. (For 1St Year) 36 Overhauling, Servicing & Testing Of L&T Make Acbs Having Capacity 800 A By Oem Or Their Authorized Service Dealer As Per Manufacturers Reccomendations Including Supply Of Maintenance Kit Comprising Grease, Cleaner, Dusters, Scrubbers Etc.Complete As Required. (For 2Nd Year) 37 Overhauling, Servicing & Testing Of Abb Make 33 Kv Ht Panel & Vcb Of Rating 1250 A I/C Testing & Calibration Of Ref 615 & Other Auxiliary Relays As Per Manufacturers Recommendations Including Supply Of Maintenance Kit Comprising Grease, Cleaner, Dusters, Scrubbers Etc.Complete As Required (For 1St Year). 38 Overhauling, Servicing & Testing Of Abb Make 33 Kv Ht Panel & Vcb Of Rating 1250 A I/C Testing & Calibration Of Ref 615 & Other Auxiliary Relays As Per Manufacturers Recommendations Including Supply Of Maintenance Kit Comprising Grease, Cleaner, Dusters, Scrubbers Etc.Complete As Required (For 2Nd Year). 39 Rewinding Of 3 Hp Submersible Pump Motor With Suitable Gauge Copper Wire Including Varnishing, Baking Etc. As Required Along With Transportation From Site To Contractors Workshop & Back To Site Etc. Complete As Required. Credit Towards Dismantled Copper Winding To Be Considered While Quoting The Rates. 40 Rewinding Of 5 Hp Pump Motor Sets (Submersible/ Mono Block) With Suitable Gauge Copper Wire Including Varnishing, Baking Etc. As Required Along With Transportation From Site To Contractors Workshop & Back To Site Etc. Complete As Required. Credit Towards Dismantled Copper Winding To Be Considered While Quoting The Rates. 41 Rewinding Of 7.5 Hp Pump Motor Sets (Submersible) With Suitable Gauge Copper Wire Including Varnishing, Baking Etc. As Required Along With Transportation From Site To Contractors Workshop & Back To Site Etc. Complete As Required. Credit Towards Dismantled Copper Winding To Be Considered While Quoting The Rates. 42 Rewinding Of 15 Hp Pump Motor Sets (Mono Block ) With Suitable Gauge Copper Wire Including Varnishing, Baking Etc. As Required Along With Transportation From Site To Contractors Workshop & Back To Site Etc. Complete As Required. Credit Towards Dismantled Copper Winding To Be Considered While Quoting The Rates. 43 Lifting & Lowering Of Submersible Pump Sets (Up To 10 Hp) From / In Borewell (Depth 400 To 450 Feet) Etc. Complete As Required. 44 Decorative Lighting Arrangement By Approx. 250 Nos Series Fairy Led Lights (Each Length Approx. 10 To 12 Mtr) & 100 Nos. Led Par Light (Pleasant & Colourful) On Occasion Of National Festival, Aai Foundation Day Etc. On /Near Terminal Building, Atc Tower Building Including Transportation To & From Site, Installation, Wiring, Connections From Nearest Power Source By Aai Etc. Complete To The Satisfaction Of Eic As Required. (For 1St Year). 45 Decorative Lighting Arrangement By Approx. 250 Nos Series Fairy Led Lights (Each Length Approx. 10 To 12 Mtr) & 100 Nos. Led Par Light (Pleasant & Colourful) On Occasion Of National Festival, Aai Foundation Day Etc.On /Near Terminal Building, Atc Tower Building Including Transportation To & From Site, Installation, Wiring, Connections From Nearest Power Source By Aai Etc. Complete To The Satisfaction Of Eic As Required. (For 2Nd Year). 46 Painting Of 7 Metre Height Street Light Poles With 2 Coats Of Aluminium Paint Including Removal Of Rust, Flakes Etc. Complete As Required. 47 Carring Out / Making In-Field Measurement Of Intensity, Beam Spread, Orientation, Chromaticity, Luminous Factor, One Time Field Alignment Setting For Inset/Elevated Type Runway Edge, Elevated Runway End, Inset/Elevated Type Threshold, Inset/Elevated Type Approach, Papi Airfield Ground Lights & Mandatory / Information Signboards By Using Vehicle Mounted Mobile Testing Equipment System / Frame Reader, Submission Of Colour Print Copy Of Duly Certified Test Reports Etc. As Per Requirement Of Icao/Civil Aviation Requirement (Car) Section-4 Aerodrome Standard And Technical Specification Etc. Complete As Required. During Testing, Replacement Of Lamps, Filters, And Lenses, Wherever Required, Shall Be Carried Out Immediately. The Final Compliance Report, Confirming Compliance With The Applicable Statutory Requirements, Shall Be Submitted. The Scope Of Work Shall Also Include Cleaning And Replacement Of The Lenses And Filter And Of The Fittings The Required Spare Parts Shall Be Provided By Aai. (For Detail Inventory Of Airfield Ground Lighting (Agl) Fixtures Refer Annexure A Given At Atc Of The Tender Document) (For 1St Year) 48 Carring Out / Making In-Field Measurement Of Intensity, Beam Spread, Orientation, Chromaticity, Luminous Factor, One Time Field Alignment Setting For Inset/Elevated Type Runway Edge, Elevated Runway End, Inset/Elevated Type Threshold, Inset/Elevated Type Approach, Papi Airfield Ground Lights & Mandatory / Information Signboards By Using Vehicle Mounted Mobile Testing Equipment System / Frame Reader, Submission Of Colour Print Copy Of Duly Certified Test Reports Etc. As Per Requirement Of Icao/Civil Aviation Requirement (Car) Section-4 Aerodrome Standard And Technical Specification Etc. Complete As Required.During Testing, Replacement Of Lamps, Filters, And Lenses, Wherever Required, Shall Be Carried Out Immediately. The Final Compliance Report, Confirming Compliance With The Applicable Statutory Requirements, Shall Be Submitted. The Scope Of Work Shall Also Include Cleaning And Replacement Of The Lenses And Filter And Of The Fittings The Required Spare Parts Shall Be Provided By Aai. (For Detail Inventory Of Airfield Ground Lighting (Agl) Fixtures Refer Annexure A Given At Atc Of The Tender Document) (For 2Nd Year) 49 Providing The Following Type/Class Of Vehicle Without Driver & With Fuel On 24 Hrs Basis On All Days I/C Holidays, Saturday & Sunday, For Repair And Maintenance Works At Jabalpur Airport As Per Terms And Conditions Of Contract For Limits Of Usage As Given Below, The Rate Shall Include Provision Of (Non-Airconditioned) Vehicle With Commercial Registration As Per Agreement Conditions, Obtaining/Renewing Fitness Certificate, Puc, Insurance Policy, Registration Certificate As Per Motor Vehicles Act, Rto Or Other Applicable Laws/Regulations As Applicable, All Consumables And Servicing And Other Requirements As Per Terms & Conditions Of Contract. The Vehicle Shall Be Driven By Maintenance Staff With Deployed Against This Contract.Type Of Vehicle , Muv - Tata Ace/Mahindra Supro Or Equivalent With Covered Cargo Box. / Quantity , 01 Vehicle / Usage , 750 Kms Per Month. 50 Re-Calibration Of Ama Make Clinometer Including To And Fro Charges From Jabalpur To Ahmadabad For Day To Day Calibration Of Papi Etc Complete As Required.(For 1St Year) 51 Re-Calibration Of Ama Make Clinometer Including To And Fro Charges From Jabalpur To Ahmadabad For Day To Day Calibration Of Papi Etc Complete As Required.(For 2Nd Year) 52 Emergency Visit By Service Engineer For Ground Calibration Of Papi Unit Excluding Civil Works, Including Dismantling & Reinstallation Of The Same To Meet Required Angle As Per Satisfaction Of Pilot/Airlines Through Oem By Deploying Technician As Required. 53 Supply Of Wind Shock Cloth For Wind Direction Indication With Following Specifications. Colour- Orange And White. Or Black And White Diameter Of Broader End-0.9Mm Diameter For Narrow End -0.45Mm Length-3.6M 54 Cable Fault Finding Services For Underground Cables Using Fault Locating Machine In Ht/Lt Cables (33 Kv/11 Kv/1.1Kv) Of All Sizes Including Transportation Of Machine To Site, Any Numbers Of Fault Location At Site Per Length Etc. Complete As Per Site Requirement. 55 Emergency Visit By Service Engineer For Repairing/Rectification Of 20 Kva 3 Phase Air-Cooled Servo Controlled Voltage Stabilizer (Model No., Air Cooled, Rating, Scvs 20Kva 3Ph Ac(340-480/415)V D2) Having Input Operating Voltage Range From 340V-480V And Complete With All Accessories As Per Technical Specifications As Required. 56 To Carry Out The Complete Items Of Works Of Cpwd Schedule Of Rates (Electrical) Dsr-2025 As Per Cpwd Specifications As Required For An Amount Of Rs. 100000/- (For Quoting Please Refer Instructions Given At Atc Clause - 40.2 Of Tender Document).The Rate Shall Be Quoted For This Item As Per Examples Given Below, (I) If Bidder Wants To Quote The Rates At Par With Rates Of Dsr-2025 (E & M), Then Bidder Has To Quote 1.00 In The Rate Column.(Ii) If Bidder Wants To Quote The Rate 10 Percent Above On Rate Of Dsr-2025 (E & M), Then Bidder Has To Quote 1.10 In The Rate Column.(Iii) If Bidder Wants To Quote The Rate 10 Percent Below On Rate Of Dsr-2025 (E & M), Then Bidder Has To Quote 0.90 In The Rate Column.

BOQ

Sl. No. Item TitleItem Description
1BOQ Item No. 1Operation & maintenance of all electrical installations of GLF system in operational area and CCR Hall, perimeter lighting, DVOR, Localizer, Glide Path, Old Power House, CISF barracks etc. as per the list of installations available in tender documents Appendix-A by deploying adequate man power as mentioned in Additional Terms & Conditions of Contract complete as per terms & conditons of contract etc. as required. Highly Skilled-1 Skilled-10 Un-Skilled-11
2BOQ Item No. 2.1Supply of spare PCB cards for 30/15/10/7.5/5/4/2.5 KW, 6.6 Amp, Microprocessor type CCR (NASU Make) complete etc. as required. Main Control Card.
3BOQ Item No. 2.2Supply of spare PCB cards for 30/15/10/7.5/5/4/2.5 KW, 6.6 Amp, Microprocessor type CCR (NASU Make) complete etc. as required. Power Supply plus Driver Card
4BOQ Item No. 2.3Supply of spare PCB cards for 30/15/10/7.5/5/4/2.5 KW, 6.6 Amp, Microprocessor type CCR (NASU Make) complete etc. as required.TTM Card (Set of 02 Cards )
5BOQ Item No. 2.4Supply of spare PCB cards for 30/15/10/7.5/5/4/2.5 KW, 6.6 Amp, Microprocessor type CCR (NASU Make) complete etc. as required.Output PT 4000V / 10 Volts.
6BOQ Item No. 2.5Supply of spare PCB cards for 30/15/10/7.5/5/4/2.5 KW, 6.6 Amp, Microprocessor type CCR (NASU Make) complete etc. as required.Thyristor 250 RK 160
7BOQ Item No. 2.6Supply of spare PCB cards for 30/15/10/7.5/5/4/2.5 KW, 6.6 Amp, Microprocessor type CCR (NASU Make) complete etc. as required.TI - 300 Fuse
8BOQ Item No. 2.7Supply of spare PCB cards for 30/15/10/7.5/5/4/2.5 KW, 6.6 Amp, Microprocessor type CCR (NASU Make) complete etc. as required.TR - 7 Transformer Primary 415
9BOQ Item No. 3Service/Emergency visit by service engineer for repairing/rectification including calibration of all 30 KW to 2.5 KW MPCCR within 48 hours of intimation of complaint and rectification of the fault as when required.(Spare will be provided by AAI)(The inventory of the CCRs as mentioned at page no. Appendix-A of SCC)
10BOQ Item No. 4Annual maintenance contract of ALCMS & related systems including trouble shooting, repairing of control cards servicing of ALCMS system by repair or replacement of defective components & hardware such as touch screen, PLCs, Desktop PC, vault processor, associated components, providing software programming / re-programming support for rectification, carrying out routine / preventive maintenance during visit on half yearly/ emergency visit basis & providing full support & telephonic guidance during breakdown etc. for rectification as & when required to keep the system in acceptable functional and serviceable condition as per terms & conditions of contract . (This work should be carried out through OEM.All hardware components required for servicing of ALCMS will be in scope of AAI).(For 1st Year)
11BOQ Item No. 5Annual maintenance contract of ALCMS & related systems including trouble shooting, repairing of control cards, servicing of ALCMS system by repair or replacement of defective components & hardware such as touch screen, PLCs, Desktop PC, vault processor, associated components, providing software programming / re-programming support for rectification, carrying out routine / preventive maintenance during on half yearly/ emergency visit basis & providing full support & telephonic guidance during breakdown etc. for rectification as & when required to keep the system in acceptable functional and serviceable condition as per terms & conditions of contract . (This work should be carried out through OEM. All hardware components required for servicing of ALCMS will be in scope of AAI).(For 2nd Year)
12BOQ Item No. 6Supply of male ,female connector suitable form 2.5 sqmm secondary lead for extended runway fitting complete as per site requirement.
13BOQ Item No. 7Supply of 5 KV grade plug and receptacle of type I class B connector suitable for field attachment with 5 KV grade PVC insulated PVC sheathed single core screened copper conductor cable of following size conforming to the relevant IS / technical specifications etc. complete as required. (1 x 6 sqmm)
14BOQ Item No. 8Supply of 150 W, 6.6 Amps bi-pin halogen lamps suitable for AMA Make elevated runway light fixtures etc. as required.
15BOQ Item No. 9Supply of Bi-pin holder for 200/ 150/45 W halogen lamp suitable for AMA Make elevated runway light fixtures etc. as required.
16BOQ Item No. 10Supply of Converter for GLF signages that can be operated from both circuits A & B along with provision of auto changeover from one circuit to another and suitable for existing signages installed at site etc. complete as required.
17BOQ Item No. 11Supply of FAA and ICAO compliant blue LED module suitable for AMA make medium intensity elevated omni directional taxi way edge light fixture, 6.6 Amps with driver with all accessories etc. complete as required.
18BOQ Item No. 12Supply of 200 W, 6.6A, single ended bi-pin Halogen lamp suitable for use in AMA make airfield lighting fittings (Similar to OSRAM make Cat. No. 64386 or Philips/Narva Make Cat. No. 58373) etc. complete as required.
19BOQ Item No. 13Supply of 105W, 6.6A, Prefocus dichroic coated reflector lamp suitable for use in ADB Safegate make inset airfield lighting fixtures (Similar to OSRAM make Cat. No. 64339A or Philips/Narva make Cat. No. 58308) etc. complete as required.
20BOQ Item No. 14Supply of terminal block assembly with fixing hardware (Part Ref, E1) suitable for ADB safegate make inset light fixtures etc. complete as required.
21BOQ Item No. 15Supply of mirror finish aluminium reflector suitable for AMA make PAPI unit installed at site to meet ICAO/CAR specifications complete with all accessories etc. as required.
22BOQ Item No. 16Supply of mirror finish aluminium reflector suitable for AMA Make Elevated Approach / Threshold / End light fixtures installed at site to meet ICAO/CAR specifications complete with all accessories etc. as required.
23BOQ Item No. 17Supply of Green Spreader Lens / Refractor Front Glass suitable for AMA Make APN type runway threshold light fixtures installed at site to meet ICAO/CAR specifications complete with all accessories etc. as required.
24BOQ Item No. 18Supply of Red Spreader Lens / Refractor Front Glass suitable for AMA Make APN type runway end light fixtures installed at site to meet ICAO/CAR specifications complete with all accessories etc. as required.
25BOQ Item No. 19Supply of Clear Spreader Lens / Refractor Front Glass suitable for AMA Make APN type approach light fixtures installed at site to meet ICAO/CAR specifications complete with all accessories etc. as required.
26BOQ Item No. 20Supply of Quick Connect Plug Connector (M) Kit for OCEM Sequence Flashing Light FFU / LEFL lights complete with all accessories etc. as required.
27BOQ Item No. 21Supply of HT Tape Roll having size 25 mm (W) X 9 m (L) etc. as required.
28BOQ Item No. 22Rewinding, repairing and overhauling of following types of fans by using suitable gauge enamel copper wire, replacement of bearing (if required), baking, oiling, greasing, assembling, testing, to & fro transportation etc. as required. i/c less for dismantle wire.Ceiling fan of all sizes
29BOQ Item No. 23Rewinding, repairing and overhauling of following types of fans by using suitable gauge enamel copper wire, replacement of bearing (if required), baking, oiling, greasing, assembling, testing, to & fro transportation etc. as required. i/c less for dismantle wire.Exhaust fan up to 450 mm Dia
30BOQ Item No. 24Dehydration and Filtration of Transformer Oil at site by bringing the Dehydration/ filtration Machine at Airport including testing oil for BDV and Acidity before and after Dehydration and Filtration, submission of test report as required for 02 Nos 500 KVA, 33/0.433 KV Transformers etc. complete job as required.The agency shall ensure that the test report after dehydration is in accordance with the relevant standards and statutory requirement (For 1st Year)
31BOQ Item No. 25Dehydration and Filtration of Transformer Oil at site by bringing the Dehydration/ filtration Machine at Airport including testing oil for BDV and Acidity before and after Dehydration and Filtration, submission of test report as required for 02 Nos 500 KVA, 33/0.433 KV Transformers etc. complete job as required.The agency shall ensure that the test report after dehydration is in accordance with the relevant standards and statutory requirement (For 2nd Year)
32BOQ Item No. 26Supply and Top-up of new transformer oil compliant with IS, 335,1993 in 500 KVA, 33/0.433 KV rating transformer including submission of test certificate etc. complete as required.
33BOQ Item No. 27Testing and calibration of GEC Alstom make IDMT Relays of type CDG-31 installed in HT/LT panel (02 OC +01 EF Relay) with relay testing kit at airport site and submitting the test reports complete etc. as required. (For 1st Year)
34BOQ Item No. 28Testing and calibration of GEC Alstom make IDMT Relays of type CDG-31 installed in HT/LT panel (02 OC +01 EF Relay) with relay testing kit at airport site and submitting the test reports complete etc. as required. (For 2nd year)
35BOQ Item No. 29Overhauling, Servicing & Testing of L&T make ACBs having Capacity 800 A by OEM or their authorized service dealer as per manufacturers reccomendations including supply of maintenance kit comprising grease, cleaner, dusters, scrubbers etc.complete as required. (For 1st Year)
36BOQ Item No. 30Overhauling, Servicing & Testing of L&T make ACBs having Capacity 800 A by OEM or their authorized service dealer as per manufacturers reccomendations including supply of maintenance kit comprising grease, cleaner, dusters, scrubbers etc.complete as required. (For 2nd Year)
37BOQ Item No. 31Overhauling, Servicing & Testing of ABB make 33 kV HT panel & VCB of rating 1250 A i/c testing & calibration of REF 615 & other auxiliary relays as per manufacturers recommendations including supply of maintenance kit comprising grease, cleaner, dusters, scrubbers etc.complete as required (For 1st Year).
38BOQ Item No. 32Overhauling, Servicing & Testing of ABB make 33 kV HT panel & VCB of rating 1250 A i/c testing & calibration of REF 615 & other auxiliary relays as per manufacturers recommendations including supply of maintenance kit comprising grease, cleaner, dusters, scrubbers etc.complete as required (For 2nd Year).
39BOQ Item No. 33Rewinding of 3 HP Submersible Pump motor with suitable gauge copper wire including varnishing, baking etc. as required along with transportation from site to contractors workshop & back to site etc. complete as required. Credit towards dismantled copper winding to be considered while quoting the rates.
40BOQ Item No. 34Rewinding of 5 HP Pump motor sets (submersible/ mono block) with suitable gauge copper wire including varnishing, baking etc. as required along with transportation from site to contractors workshop & back to site etc. complete as required. Credit towards dismantled copper winding to be considered while quoting the rates.
41BOQ Item No. 35Rewinding of 7.5 HP Pump motor sets (submersible) with suitable gauge copper wire including varnishing, baking etc. as required along with transportation from site to contractors workshop & back to site etc. complete as required. Credit towards dismantled copper winding to be considered while quoting the rates.
42BOQ Item No. 36Rewinding of 15 HP Pump motor sets (mono block ) with suitable gauge copper wire including varnishing, baking etc. as required along with transportation from site to contractors workshop & back to site etc. complete as required. Credit towards dismantled copper winding to be considered while quoting the rates.
43BOQ Item No. 37Lifting & lowering of submersible pump sets (up to 10 HP) from / in borewell (Depth 400 to 450 feet) etc. complete as required.
44BOQ Item No. 38Decorative lighting arrangement by approx. 250 Nos series fairy LED lights (each length approx. 10 to 12 Mtr) & 100 nos. LED PAR Light (pleasant & colourful) on occasion of National Festival, AAI Foundation day etc. on /near Terminal Building, ATC Tower Building including transportation to & from site, installation, wiring, connections from nearest power source by AAI etc. complete to the satisfaction of EIC as required. (For 1st Year).
45BOQ Item No. 39Decorative lighting arrangement by approx. 250 Nos series fairy LED lights (each length approx. 10 to 12 Mtr) & 100 nos. LED PAR Light (pleasant & colourful) on occasion of National Festival, AAI Foundation day etc.on /near Terminal Building, ATC Tower Building including transportation to & from site, installation, wiring, connections from nearest power source by AAI etc. complete to the satisfaction of EIC as required. (For 2nd Year).
46BOQ Item No. 40Painting of 7 metre height street light poles with 2 coats of aluminium paint including removal of rust, flakes etc. complete as required.
47BOQ Item No. 41Carring out / Making in-field measurement of intensity, beam spread, orientation, chromaticity, luminous factor, one time field alignment setting for inset/elevated type runway edge, elevated runway end, inset/elevated type threshold, inset/elevated type approach, PAPI airfield ground lights & mandatory / information signboards by using vehicle mounted Mobile Testing Equipment system / frame reader, submission of colour print copy of duly certified test reports etc. as per requirement of ICAO/Civil Aviation Requirement (CAR) Section-4 Aerodrome Standard and Technical specification etc. complete as required. During testing, replacement of lamps, filters, and lenses, wherever required, shall be carried out immediately. The final compliance report, confirming compliance with the applicable statutory requirements, shall be submitted. The scope of work shall also include cleaning and replacement of the lenses and filter and of the fittings The required spare parts shall be provided by AAI. (For detail inventory of airfield ground lighting (AGL) fixtures refer Annexure A given at ATC of the tender document) (For 1st Year)
48BOQ Item No. 42Carring out / Making in-field measurement of intensity, beam spread, orientation, chromaticity, luminous factor, one time field alignment setting for inset/elevated type runway edge, elevated runway end, inset/elevated type threshold, inset/elevated type approach, PAPI airfield ground lights & mandatory / information signboards by using vehicle mounted Mobile Testing Equipment system / frame reader, submission of colour print copy of duly certified test reports etc. as per requirement of ICAO/Civil Aviation Requirement (CAR) Section-4 Aerodrome Standard and Technical specification etc. complete as required.During testing, replacement of lamps, filters, and lenses, wherever required, shall be carried out immediately. The final compliance report, confirming compliance with the applicable statutory requirements, shall be submitted. The scope of work shall also include cleaning and replacement of the lenses and filter and of the fittings The required spare parts shall be provided by AAI. (For detail inventory of airfield ground lighting (AGL) fixtures refer Annexure A given at ATC of the tender document) (For 2nd Year)
49BOQ Item No. 43Providing the following type/class of vehicle without driver & with fuel on 24 hrs basis on all days i/c holidays, Saturday & Sunday, for repair and maintenance works at Jabalpur Airport as per terms and conditions of contract for limits of usage as given below, The rate shall include provision of (Non-airconditioned) vehicle with commercial registration as per agreement conditions, obtaining/renewing fitness certificate, PUC, insurance policy, registration certificate as per Motor Vehicles Act, RTO or other applicable laws/regulations as applicable, all consumables and servicing and other requirements as per terms & conditions of contract. The vehicle shall be driven by maintenance staff with deployed against this contract.Type of Vehicle , MUV - TATA ACE/MAHINDRA SUPRO Or Equivalent with covered Cargo Box. / Quantity , 01 Vehicle / Usage , 750 kms per month.
50BOQ Item No. 44Re-calibration of AMA make clinometer including to and fro charges from Jabalpur to Ahmadabad for day to day calibration of PAPI etc complete as required.(For 1st Year)
51BOQ Item No. 45Re-calibration of AMA make clinometer including to and fro charges from Jabalpur to Ahmadabad for day to day calibration of PAPI etc complete as required.(For 2nd Year)
52BOQ Item No. 46Emergency visit by service engineer for Ground calibration of PAPI Unit excluding civil works, including dismantling & reinstallation of the same to meet required angle as per satisfaction of Pilot/Airlines through OEM by deploying technician as required.
53BOQ Item No. 47Supply of wind shock cloth for wind direction indication with following specifications.Colour- Orange and white. Or Black and whiteDiameter of broader end-0.9mmDiameter for narrow end -0.45mmLength-3.6m
54BOQ Item No. 48Cable fault finding services for underground cables using fault locating machine in HT/LT cables (33 KV/11 KV/1.1KV) of all sizes including transportation of machine to site, any numbers of fault location at site per length etc. complete as per site requirement.
55BOQ Item No. 49Emergency visit by service engineer for repairing/rectification of 20 KVA 3 phase air-cooled servo controlled voltage stabilizer (Model No., Air cooled, Rating, SCVS 20KVA 3PH AC(340-480/415)V D2) having input operating voltage range from 340V-480V and complete with all accessories as per technical specifications as required.
56BOQ Item No. 50To carry out the complete items of works of CPWD schedule of rates (Electrical) DSR-2025 as per CPWD specifications as required for an amount of Rs. 100000/- (For quoting please refer instructions given at ATC clause - 40.2 of tender document).The rate shall be quoted for this item as per examples given below, (i) If bidder wants to quote the rates at par with rates of DSR-2025 (E & M), then bidder has to quote 1.00 in the rate column.(ii) If bidder wants to quote the rate 10 percent above on rate of DSR-2025 (E & M), then bidder has to quote 1.10 in the rate column.(iii) If bidder wants to quote the rate 10 percent below on rate of DSR-2025 (E & M), then bidder has to quote 0.90 in the rate column.

AI Tender Summary

OUR REF NO 57884310
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 2.41 Crore
LAST DATE 26-10-2026
Authority
Authority Name Airports Authority Of India
Work Description Bids Are Invited For Annual Operation And Maintenance Of Ground Lighting Facilities Including Supply Of Glf Spares At Jabalpur Airport (Year 2026-28). 1 Operation & Maintenance Of All Electrical Installations Of Glf System In Operational Area And Ccr Hall, Perimeter Lighting, Dvor, Localizer, Glide Path, Old Power House, Cisf Barracks Etc. As Per The List Of Installations Available In Tender Documents Appendix-A By Deploying Adequate Man Power As Mentioned In Additional Terms & Conditions Of Contract Complete As Per Terms & Conditons Of Contract Etc. As Required. Highly Skilled-1 Skilled-10 Un-Skilled-11 2 Supply Of Spare Pcb Cards For 30/15/10/7.5/5/4/2.5 Kw, 6.6 Amp, Microprocessor Type Ccr (Nasu Make) Complete Etc. As Required. Main Control Card. 3 Supply Of Spare Pcb Cards For 30/15/10/7.5/5/4/2.5 Kw, 6.6 Amp, Microprocessor Type Ccr (Nasu Make) Complete Etc. As Required. Power Supply Plus Driver Card 4 Supply Of Spare Pcb Cards For 30/15/10/7.5/5/4/2.5 Kw, 6.6 Amp, Microprocessor Type Ccr (Nasu Make) Complete Etc. As Required.Ttm Card (Set Of 02 Cards ) 5 Supply Of Spare Pcb Cards For 30/15/10/7.5/5/4/2.5 Kw, 6.6 Amp, Microprocessor Type Ccr (Nasu Make) Complete Etc. As Required.Output Pt 4000V / 10 Volts. 6 Supply Of Spare Pcb Cards For 30/15/10/7.5/5/4/2.5 Kw, 6.6 Amp, Microprocessor Type Ccr (Nasu Make) Complete Etc. As Required.Thyristor 250 Rk 160 7 Supply Of Spare Pcb Cards For 30/15/10/7.5/5/4/2.5 Kw, 6.6 Amp, Microprocessor Type Ccr (Nasu Make) Complete Etc. As Required.Ti - 300 Fuse 8 Supply Of Spare Pcb Cards For 30/15/10/7.5/5/4/2.5 Kw, 6.6 Amp, Microprocessor Type Ccr (Nasu Make) Complete Etc. As Required.Tr - 7 Transformer Primary 415 9 Service/Emergency Visit By Service Engineer For Repairing/Rectification Including Calibration Of All 30 Kw To 2.5 Kw Mpccr Within 48 Hours Of Intimation Of Complaint And Rectification Of The Fault As When Required.(Spare Will Be Provided By Aai)(The Inventory Of The Ccrs As Mentioned At Page No. Appendix-A Of Scc) 10 Annual Maintenance Contract Of Alcms & Related Systems Including Trouble Shooting, Repairing Of Control Cards Servicing Of Alcms System By Repair Or Replacement Of Defective Components & Hardware Such As Touch Screen, Plcs, Desktop Pc, Vault Processor, Associated Components, Providing Software Programming / Re-Programming Support For Rectification, Carrying Out Routine / Preventive Maintenance During Visit On Half Yearly/ Emergency Visit Basis & Providing Full Support & Telephonic Guidance During Breakdown Etc. For Rectification As & When Required To Keep The System In Acceptable Functional And Serviceable Condition As Per Terms & Conditions Of Contract . (This Work Should Be Carried Out Through Oem.All Hardware Components Required For Servicing Of Alcms Will Be In Scope Of Aai).(For 1St Year) 11 Annual Maintenance Contract Of Alcms & Related Systems Including Trouble Shooting, Repairing Of Control Cards, Servicing Of Alcms System By Repair Or Replacement Of Defective Components & Hardware Such As Touch Screen, Plcs, Desktop Pc, Vault Processor, Associated Components, Providing Software Programming / Re-Programming Support For Rectification, Carrying Out Routine / Preventive Maintenance During On Half Yearly/ Emergency Visit Basis & Providing Full Support & Telephonic Guidance During Breakdown Etc. For Rectification As & When Required To Keep The System In Acceptable Functional And Serviceable Condition As Per Terms & Conditions Of Contract . (This Work Should Be Carried Out Through Oem. All Hardware Components Required For Servicing Of Alcms Will Be In Scope Of Aai).(For 2Nd Year) 12 Supply Of Male ,Female Connector Suitable Form 2.5 Sqmm Secondary Lead For Extended Runway Fitting Complete As Per Site Requirement. 13 Supply Of 5 Kv Grade Plug And Receptacle Of Type I Class B Connector Suitable For Field Attachment With 5 Kv Grade Pvc Insulated Pvc Sheathed Single Core Screened Copper Conductor Cable Of Following Size Conforming To The Relevant Is / Technical Specifications Etc. Complete As Required. (1 X 6 Sqmm) 14 Supply Of 150 W, 6.6 Amps Bi-Pin Halogen Lamps Suitable For Ama Make Elevated Runway Light Fixtures Etc. As Required. 15 Supply Of Bi-Pin Holder For 200/ 150/45 W Halogen Lamp Suitable For Ama Make Elevated Runway Light Fixtures Etc. As Required. 16 Supply Of Converter For Glf Signages That Can Be Operated From Both Circuits A & B Along With Provision Of Auto Changeover From One Circuit To Another And Suitable For Existing Signages Installed At Site Etc. Complete As Required. 17 Supply Of Faa And Icao Compliant Blue Led Module Suitable For Ama Make Medium Intensity Elevated Omni Directional Taxi Way Edge Light Fixture, 6.6 Amps With Driver With All Accessories Etc. Complete As Required. 18 Supply Of 200 W, 6.6A, Single Ended Bi-Pin Halogen Lamp Suitable For Use In Ama Make Airfield Lighting Fittings (Similar To Osram Make Cat. No. 64386 Or Philips/Narva Make Cat. No. 58373) Etc. Complete As Required. 19 Supply Of 105W, 6.6A, Prefocus Dichroic Coated Reflector Lamp Suitable For Use In Adb Safegate Make Inset Airfield Lighting Fixtures (Similar To Osram Make Cat. No. 64339A Or Philips/Narva Make Cat. No. 58308) Etc. Complete As Required. 20 Supply Of Terminal Block Assembly With Fixing Hardware (Part Ref, E1) Suitable For Adb Safegate Make Inset Light Fixtures Etc. Complete As Required. 21 Supply Of Mirror Finish Aluminium Reflector Suitable For Ama Make Papi Unit Installed At Site To Meet Icao/Car Specifications Complete With All Accessories Etc. As Required. 22 Supply Of Mirror Finish Aluminium Reflector Suitable For Ama Make Elevated Approach / Threshold / End Light Fixtures Installed At Site To Meet Icao/Car Specifications Complete With All Accessories Etc. As Required. 23 Supply Of Green Spreader Lens / Refractor Front Glass Suitable For Ama Make Apn Type Runway Threshold Light Fixtures Installed At Site To Meet Icao/Car Specifications Complete With All Accessories Etc. As Required. 24 Supply Of Red Spreader Lens / Refractor Front Glass Suitable For Ama Make Apn Type Runway End Light Fixtures Installed At Site To Meet Icao/Car Specifications Complete With All Accessories Etc. As Required. 25 Supply Of Clear Spreader Lens / Refractor Front Glass Suitable For Ama Make Apn Type Approach Light Fixtures Installed At Site To Meet Icao/Car Specifications Complete With All Accessories Etc. As Required. 26 Supply Of Quick Connect Plug Connector (M) Kit For Ocem Sequence Flashing Light Ffu / Lefl Lights Complete With All Accessories Etc. As Required. 27 Supply Of Ht Tape Roll Having Size 25 Mm (W) X 9 M (L) Etc. As Required. 28 Rewinding, Repairing And Overhauling Of Following Types Of Fans By Using Suitable Gauge Enamel Copper Wire, Replacement Of Bearing (If Required), Baking, Oiling, Greasing, Assembling, Testing, To & Fro Transportation Etc. As Required. I/C Less For Dismantle Wire. Ceiling Fan Of All Sizes 29 Rewinding, Repairing And Overhauling Of Following Types Of Fans By Using Suitable Gauge Enamel Copper Wire, Replacement Of Bearing (If Required), Baking, Oiling, Greasing, Assembling, Testing, To & Fro Transportation Etc. As Required. I/C Less For Dismantle Wire. Exhaust Fan Up To 450 Mm Dia 30 Dehydration And Filtration Of Transformer Oil At Site By Bringing The Dehydration/ Filtration Machine At Airport Including Testing Oil For Bdv And Acidity Before And After Dehydration And Filtration, Submission Of Test Report As Required For 02 Nos 500 Kva, 33/0.433 Kv Transformers Etc. Complete Job As Required.The Agency Shall Ensure That The Test Report After Dehydration Is In Accordance With The Relevant Standards And Statutory Requirement (For 1St Year) 31 Dehydration And Filtration Of Transformer Oil At Site By Bringing The Dehydration/ Filtration Machine At Airport Including Testing Oil For Bdv And Acidity Before And After Dehydration And Filtration, Submission Of Test Report As Required For 02 Nos 500 Kva, 33/0.433 Kv Transformers Etc. Complete Job As Required.The Agency Shall Ensure That The Test Report After Dehydration Is In Accordance With The Relevant Standards And Statutory Requirement (For 2Nd Year) 32 Supply And Top-Up Of New Transformer Oil Compliant With Is, 335,1993 In 500 Kva, 33/0.433 Kv Rating Transformer Including Submission Of Test Certificate Etc. Complete As Required. 33 Testing And Calibration Of Gec Alstom Make Idmt Relays Of Type Cdg-31 Installed In Ht/Lt Panel (02 Oc +01 Ef Relay) With Relay Testing Kit At Airport Site And Submitting The Test Reports Complete Etc. As Required. (For 1St Year) 34 Testing And Calibration Of Gec Alstom Make Idmt Relays Of Type Cdg-31 Installed In Ht/Lt Panel (02 Oc +01 Ef Relay) With Relay Testing Kit At Airport Site And Submitting The Test Reports Complete Etc. As Required. (For 2Nd Year) 35 Overhauling, Servicing & Testing Of L&T Make Acbs Having Capacity 800 A By Oem Or Their Authorized Service Dealer As Per Manufacturers Reccomendations Including Supply Of Maintenance Kit Comprising Grease, Cleaner, Dusters, Scrubbers Etc.Complete As Required. (For 1St Year) 36 Overhauling, Servicing & Testing Of L&T Make Acbs Having Capacity 800 A By Oem Or Their Authorized Service Dealer As Per Manufacturers Reccomendations Including Supply Of Maintenance Kit Comprising Grease, Cleaner, Dusters, Scrubbers Etc.Complete As Required. (For 2Nd Year) 37 Overhauling, Servicing & Testing Of Abb Make 33 Kv Ht Panel & Vcb Of Rating 1250 A I/C Testing & Calibration Of Ref 615 & Other Auxiliary Relays As Per Manufacturers Recommendations Including Supply Of Maintenance Kit Comprising Grease, Cleaner, Dusters, Scrubbers Etc.Complete As Required (For 1St Year). 38 Overhauling, Servicing & Testing Of Abb Make 33 Kv Ht Panel & Vcb Of Rating 1250 A I/C Testing & Calibration Of Ref 615 & Other Auxiliary Relays As Per Manufacturers Recommendations Including Supply Of Maintenance Kit Comprising Grease, Cleaner, Dusters, Scrubbers Etc.Complete As Required (For 2Nd Year). 39 Rewinding Of 3 Hp Submersible Pump Motor With Suitable Gauge Copper Wire Including Varnishing, Baking Etc. As Required Along With Transportation From Site To Contractors Workshop & Back To Site Etc. Complete As Required. Credit Towards Dismantled Copper Winding To Be Considered While Quoting The Rates. 40 Rewinding Of 5 Hp Pump Motor Sets (Submersible/ Mono Block) With Suitable Gauge Copper Wire Including Varnishing, Baking Etc. As Required Along With Transportation From Site To Contractors Workshop & Back To Site Etc. Complete As Required. Credit Towards Dismantled Copper Winding To Be Considered While Quoting The Rates. 41 Rewinding Of 7.5 Hp Pump Motor Sets (Submersible) With Suitable Gauge Copper Wire Including Varnishing, Baking Etc. As Required Along With Transportation From Site To Contractors Workshop & Back To Site Etc. Complete As Required. Credit Towards Dismantled Copper Winding To Be Considered While Quoting The Rates. 42 Rewinding Of 15 Hp Pump Motor Sets (Mono Block ) With Suitable Gauge Copper Wire Including Varnishing, Baking Etc. As Required Along With Transportation From Site To Contractors Workshop & Back To Site Etc. Complete As Required. Credit Towards Dismantled Copper Winding To Be Considered While Quoting The Rates. 43 Lifting & Lowering Of Submersible Pump Sets (Up To 10 Hp) From / In Borewell (Depth 400 To 450 Feet) Etc. Complete As Required. 44 Decorative Lighting Arrangement By Approx. 250 Nos Series Fairy Led Lights (Each Length Approx. 10 To 12 Mtr) & 100 Nos. Led Par Light (Pleasant & Colourful) On Occasion Of National Festival, Aai Foundation Day Etc. On /Near Terminal Building, Atc Tower Building Including Transportation To & From Site, Installation, Wiring, Connections From Nearest Power Source By Aai Etc. Complete To The Satisfaction Of Eic As Required. (For 1St Year). 45 Decorative Lighting Arrangement By Approx. 250 Nos Series Fairy Led Lights (Each Length Approx. 10 To 12 Mtr) & 100 Nos. Led Par Light (Pleasant & Colourful) On Occasion Of National Festival, Aai Foundation Day Etc.On /Near Terminal Building, Atc Tower Building Including Transportation To & From Site, Installation, Wiring, Connections From Nearest Power Source By Aai Etc. Complete To The Satisfaction Of Eic As Required. (For 2Nd Year). 46 Painting Of 7 Metre Height Street Light Poles With 2 Coats Of Aluminium Paint Including Removal Of Rust, Flakes Etc. Complete As Required. 47 Carring Out / Making In-Field Measurement Of Intensity, Beam Spread, Orientation, Chromaticity, Luminous Factor, One Time Field Alignment Setting For Inset/Elevated Type Runway Edge, Elevated Runway End, Inset/Elevated Type Threshold, Inset/Elevated Type Approach, Papi Airfield Ground Lights & Mandatory / Information Signboards By Using Vehicle Mounted Mobile Testing Equipment System / Frame Reader, Submission Of Colour Print Copy Of Duly Certified Test Reports Etc. As Per Requirement Of Icao/Civil Aviation Requirement (Car) Section-4 Aerodrome Standard And Technical Specification Etc. Complete As Required. During Testing, Replacement Of Lamps, Filters, And Lenses, Wherever Required, Shall Be Carried Out Immediately. The Final Compliance Report, Confirming Compliance With The Applicable Statutory Requirements, Shall Be Submitted. The Scope Of Work Shall Also Include Cleaning And Replacement Of The Lenses And Filter And Of The Fittings The Required Spare Parts Shall Be Provided By Aai. (For Detail Inventory Of Airfield Ground Lighting (Agl) Fixtures Refer Annexure A Given At Atc Of The Tender Document) (For 1St Year) 48 Carring Out / Making In-Field Measurement Of Intensity, Beam Spread, Orientation, Chromaticity, Luminous Factor, One Time Field Alignment Setting For Inset/Elevated Type Runway Edge, Elevated Runway End, Inset/Elevated Type Threshold, Inset/Elevated Type Approach, Papi Airfield Ground Lights & Mandatory / Information Signboards By Using Vehicle Mounted Mobile Testing Equipment System / Frame Reader, Submission Of Colour Print Copy Of Duly Certified Test Reports Etc. As Per Requirement Of Icao/Civil Aviation Requirement (Car) Section-4 Aerodrome Standard And Technical Specification Etc. Complete As Required.During Testing, Replacement Of Lamps, Filters, And Lenses, Wherever Required, Shall Be Carried Out Immediately. The Final Compliance Report, Confirming Compliance With The Applicable Statutory Requirements, Shall Be Submitted. The Scope Of Work Shall Also Include Cleaning And Replacement Of The Lenses And Filter And Of The Fittings The Required Spare Parts Shall Be Provided By Aai. (For Detail Inventory Of Airfield Ground Lighting (Agl) Fixtures Refer Annexure A Given At Atc Of The Tender Document) (For 2Nd Year) 49 Providing The Following Type/Class Of Vehicle Without Driver & With Fuel On 24 Hrs Basis On All Days I/C Holidays, Saturday & Sunday, For Repair And Maintenance Works At Jabalpur Airport As Per Terms And Conditions Of Contract For Limits Of Usage As Given Below, The Rate Shall Include Provision Of (Non-Airconditioned) Vehicle With Commercial Registration As Per Agreement Conditions, Obtaining/Renewing Fitness Certificate, Puc, Insurance Policy, Registration Certificate As Per Motor Vehicles Act, Rto Or Other Applicable Laws/Regulations As Applicable, All Consumables And Servicing And Other Requirements As Per Terms & Conditions Of Contract. The Vehicle Shall Be Driven By Maintenance Staff With Deployed Against This Contract.Type Of Vehicle , Muv - Tata Ace/Mahindra Supro Or Equivalent With Covered Cargo Box. / Quantity , 01 Vehicle / Usage , 750 Kms Per Month. 50 Re-Calibration Of Ama Make Clinometer Including To And Fro Charges From Jabalpur To Ahmadabad For Day To Day Calibration Of Papi Etc Complete As Required.(For 1St Year) 51 Re-Calibration Of Ama Make Clinometer Including To And Fro Charges From Jabalpur To Ahmadabad For Day To Day Calibration Of Papi Etc Complete As Required.(For 2Nd Year) 52 Emergency Visit By Service Engineer For Ground Calibration Of Papi Unit Excluding Civil Works, Including Dismantling & Reinstallation Of The Same To Meet Required Angle As Per Satisfaction Of Pilot/Airlines Through Oem By Deploying Technician As Required. 53 Supply Of Wind Shock Cloth For Wind Direction Indication With Following Specifications. Colour- Orange And White. Or Black And White Diameter Of Broader End-0.9Mm Diameter For Narrow End -0.45Mm Length-3.6M 54 Cable Fault Finding Services For Underground Cables Using Fault Locating Machine In Ht/Lt Cables (33 Kv/11 Kv/1.1Kv) Of All Sizes Including Transportation Of Machine To Site, Any Numbers Of Fault Location At Site Per Length Etc. Complete As Per Site Requirement. 55 Emergency Visit By Service Engineer For Repairing/Rectification Of 20 Kva 3 Phase Air-Cooled Servo Controlled Voltage Stabilizer (Model No., Air Cooled, Rating, Scvs 20Kva 3Ph Ac(340-480/415)V D2) Having Input Operating Voltage Range From 340V-480V And Complete With All Accessories As Per Technical Specifications As Required. 56 To Carry Out The Complete Items Of Works Of Cpwd Schedule Of Rates (Electrical) Dsr-2025 As Per Cpwd Specifications As Required For An Amount Of Rs. 100000/- (For Quoting Please Refer Instructions Given At Atc Clause - 40.2 Of Tender Document).The Rate Shall Be Quoted For This Item As Per Examples Given Below, (I) If Bidder Wants To Quote The Rates At Par With Rates Of Dsr-2025 (E & M), Then Bidder Has To Quote 1.00 In The Rate Column.(Ii) If Bidder Wants To Quote The Rate 10 Percent Above On Rate Of Dsr-2025 (E & M), Then Bidder Has To Quote 1.10 In The Rate Column.(Iii) If Bidder Wants To Quote The Rate 10 Percent Below On Rate Of Dsr-2025 (E & M), Then Bidder Has To Quote 0.90 In The Rate Column.
Basic Detail
Tender No GEM/2026/B/8108801
Bidding Type Tender
Location
City Jabalpur
State Madhya Pradesh
Key Dates
Publish Date 05 Oct 2026
Submission Date 26 Oct 2026
Open Date 27 Oct 2026
Finance
Tender Value 2.41 Crore
Tender Fee Ref. Documents
EMD 7.25 Lakhs
Exemption Available
Document List
e0f838de-d370-42f8-9789-fb358fad49ba.pdf
1790853053.xlsx
sow_2026-10-01-16-03-20_b08d17120e11b98c5382b6bc34e6a1a5.pdf
9975538_Boq_1.xlsx

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Oct 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
pdf

e0f838de-d370-42f8-9789-fb358fad49ba.pdf

xlsx

1790853053.xlsx

pdf

sow_2026-10-01-16-03-20_b08d17120e11b98c5382b6bc34e6a1a5.pdf

xlsx

9975538_Boq_1.xlsx

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders