Tender For Construction Of Ministerial Qtr. No.2 At Debagada Of Debagada Section In Debagada Range Under Debagada Forest Division For The Year 2026-27
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Oct 2026
7 days left
EMD
10813
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Deogarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Ministerial Qtr. No.2 At Debagada Of Debagada Section In Debagada Range Under Debagada Forest Division For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches in all kinds of soil incluidng moorum stoney earth and earth mixed with boulders except sheet rock and boulders requiring blasting, including dressing and levelling the bed up to the required depth and depositing the excavated materials with all leads and lifts, T&P. shoring and shuttering if required etc.complete as directed by the Engineer-in-charge |
| 2 | Supplying and filling foundation and plinth with sand well watered and rammed with cost, conveyance, royalities of all materials complete (Measurement to be taken on compacted section only) |
| 3 | Cement concrete (1:3:6) in foundation and floor i;e below the base course of terrazo flooring using 4cm (1½”) size black crusher hard broken granite chips metal of approved quality and from approved quarry, including lowering, laying concrete, watering curing etc. complete to required level laid in layers not exceeding 1'-6\\" thick including cost, conveyance, royalitiesof all materials and cost of all labour, T&P. required for the work etc. complete as per direction of the Engineer-in-charge |
| 4 | R.C.C. (1:2:4) ........... having a minimum compressive strength ( in work test) 150 kg/cm2 cubes at 28 days after mixing and tests conducted in accordance with I.S. 456 and I.S. 516 using 12mm to 20mm size black hard crusher broken granite chips of approved quality and from approved quarry (20mm size not to exceed 25%) including hoisting, lowering, laying, compacting concrete watering and curing for 28 days centering, shuttering, finishing the exposed surface smooth, providing grooves or beads where necessary, as directed including cost, conveyance, royalties and taxes of all materials and cost of all labour T&P required for the work etc. complete in all respect but excluding the cost of M.S. roads or Tor steel and binding wire and labour charges for bending binding and tying the grillsA)Column Base |
| 5 | Gade beam/Plinth Bend |
| 6 | Lintel Band |
| 7 | Chajja |
| 8 | Column super upto roof |
| 9 | Roof Slab |
| 10 | Cutting, straightening the bent up M.S. Rods or Tor steel, bending, binding, welding joining if necessary and tying the grills and placing in position as required for R.C.C. works and for providing required no of fan hooks hoisting, lowering, laying including, cost, conveyance of all M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work bending, binding and tying the grills in all floors (Payment will be made on weight of M.S. Rods or Tor steel only and no separate payment will be made towards the weight of binding wires) |
| 11 | Random Rubble H.G.Stone masonary in C.M.(1:4) in Foundation and Plinth including, watering, curing etc. all complete including cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. complete . |
| 12 | Fly ash brick masonry in cement mortar (1:6) using 25x12x8cm size bricks after immersing the bricks for six hours in water before use in Superstructure including, splays cutting, circular moulding and carbelling, champhering and similar such type of works watering, curing etc. all complete including cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. complete (Crushing strength of bricks should not be less than 75kg to 99 kg/cm2 with dimensional tolerance +3%/8%) |
| 13 | 12mm (½\\") thick cement plaster (1:6) over brick masonary finished smooth, after racking out the joints including watering and curing etc. with cost, conveyance, royalities of all materials and cost of all labour and T&P required for the work etc. complete as per direction of the Engineer-in-charge |
| 14 | 16mm (5/8\\") thick cement plaster (1:6) over brick masonry finished smooth, after racking out the joints including watering and curing etc. with cost, conveyance, royalties of all materials and cost of all labour and T&P required for the work etc. complete as per direction of the Engineer-in-charge |
| 15 | 6mm thick cement plaster (1:4) over ceilling plaster finished smooth after chipping, chiselling & cleaning including watering, curing etc. with cost, conveyance, royality and taxes of all materials, labour, T&P required for the work etc. complete |
| 16 | Supplying, fitting and fixing of ceramic Glazed in floor treads or steps and landing on 25mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigments using white cement in grating to match the shade of the tile etc. including cost, conveyance, royalties of all materials and labour, T&P required for the work etc. complete as directed by the Engineer-in-charge |
| 17 | Supplying, fitting and fixing ceramic glazed tile in dado & skriting on 12mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigments using white cement in grating to match the shade of the tile etc. including cost, conveyance, royalties of all materials and labour, T&P required for the work etc. complete as directed by the Engineer-in-charge |
| 18 | Providing fitting and fixing M.S. pannel shutters for doors & windows as per specification and design including cutting grooves, in brick or RCC structure and making good to the damages with C.C. (1:2:4) including welding, cutting, cost, conveyance of all materials, cost of all labour, T&P required for the work etc. complete |
| 19 | Supplying, fitting and fixing window M.S. grills, grill gates made of M.S. flat/square bar of approved specification design fitted & fixed including cutting the grooves in brick or RCC structure and making good to the damages with C.C. (1:2:4), cost of nails, screws but including cost of grills, conveyance of all materials, labour, T&P. etc. complete as per direction of the Engineer-in-charge |
| 20 | Painting two coats with paints of approved shade in all floors to wood and iron works including sand papering, polishing the surface, cost, conveyance of all materials, all labour and T&P. required for the work including the cost of paint as per the direction of the Engineer-in-charge |
| 21 | Providing fitting and fixing M.S. pannel shutters (GRP) for doors as per specification and design including cutting grooves, in brick or RCC structure and making good to the damages with C.C. (1:2:4) including welding, cutting, cost, conveyance of all materials, cost of all labour, T&P required for the work etc. complete |
| 22 | Providing fitting and fixing GRP) for doors frame including one coat priming, welding, cutting, cost, conveyance of all materials, cost of all labour, T&P required for the work etc. complete |
| 23 | Painting two coats with Weather coats of approved shade on old work including cost of paint including labour, T&P. and cost of distemper required for the work etc. complete as per direction of Engineer-in-charge |
| 24 | Providing P.H fitting etc |
| 25 | Providing E.I. fitting s etc Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender