Tender For Construction Of Community Hall Gram Panchayat Akhlaspur Vikas Khand Ramnagar Me Parmatma Sudha Singh
Tender Value
16 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
3 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambedkar Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Community Hall Gram Panchayat Akhlaspur Vikas Khand Ramnagar Me Parmatma Sudha Singh
BOQ
| Sl. No. | Item Description |
| 1 | (A) BUILDING WORKSClearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 3 | Excavating, supplying, stacking and filling of local earth by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. |
| 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including neat cement slurry, trowelling the cost of mixing of chips etc. complete. 6 mm thick with 20 mm nominal size stone aggregate. |
| 7 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart during drilling 12 mm dia minimum diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor: With Chlorpyrifos/Lindane EC20% with 1%. |
| 8 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement. All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 9 | Reinforced cement concrete work in walls (any thickness), including attached pillars, buttresses, plinths and string courses, lintels, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stairs and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete. |
| 12 | Lintels, chajjas, piching lintels, girders, beams and string courses. |
| 13 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 14 | Suspended floors, roofs, landings, balconies and access platforms. |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 16 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 17 | Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete — upto plinth level Thermo-Mechanically treated bars of grade Fe-500 D. |
| 18 | 15 mm cement plaster on rough side single or half brick wall of mix 1:6 (1 cement : 6 coarse sand). |
| 19 | 12 mm cement plaster of mix 1:6 (1 cement : 6 coarse sand). |
| 20 | Providing and applying white cement based putty of average thickness 1 mm, over the approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. |
| 21 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. |
| 22 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, including necessary fittings complete, including applying a priming coat of approvedUsing M.S. angles 40x40x6 mm for diagonal braces. |
| 23 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x5 mm flat pieces to the existing T-iron frame or |
| 24 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 25 | Providing and laying Ceramic glazed floor tiles of size 300×300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. |
| 26 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, purple, green, black of any size as approved by Engineer-in-Charge, in skirting, dado of steps and dado, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching |
| 27 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double Charged Vitrified tiles Polished finish of |
| 28 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item). |
| 29 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 30 | Distempering with oil bound distemper of approved brand and manufacture to give an even shade. Two or more coats on new work over and including a coat of primer. |
| 31 | Finishing walls with Premium Acrylic Smooth exterior paint of required shade. Old surface — Surface prepared with New work — Two or more coats applied @ 1.38 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm. |
| 32 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socket pipes 110 mm. |
| 33 | Providing and fixing unplasticised PVC rain water pipes of approved design of unplasticised PVC rain water pipes of 50x50x50 mm rain water pipes, screwed with MS screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and |
| 34 | Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gapCoupler 110 mm |
| 35 | 110 mm bend (87.5°) |
| 36 | 110 mm Shoe (Plain) |
| 37 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 38 | (B) ELECTRICAL WORKSWiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor, single or multi core cable in surface/recessed medium class PVC conduit with modular switch, modular plate, suitable GI box and earthing the 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group A |
| 39 | Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. 2×2.5 sq.mm + 1×2.5 sq.mm earth wire |
| 40 | 2×4.0 sq.mm + 1×4.0 sq.mm earth wire |
| 41 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting of the wall and making good the same in case of recessed conduit as required.1.21.1: 20 mm |
| 42 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch |
| 43 | 5/6 A socket outlet |
| 44 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 45 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as |
| 46 | Supplying and fixing following type modules, GI box alongwith modular base & cover plate for modular switches etc. as required.1.27.1: 1 or 2 module (75 mm × 75 mm) |
| 47 | Installation, testing & commissioning of ceiling fan, including wiring the down rod of standard length (upto 30 cm) with 1.5 sq.mm FRLSH PVC insulated, copper conductor single core cable etc. including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. |
| 48 | Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, ‘C’ curve including connections, painting etc. as required. (For A.C. Point/MCB Point) |
| 49 | S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWG MS sheet incorporating 100mm dia. MS round bar duly bent for supporting fan hanger duly painted without outside and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc. for proper completion of work. |
| 50 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated ceiling fan with Brush Less Direct Current (BLDC) Motor, of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise <75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 51 | Supplying and fixing following way single pole and neutral (TPN), sheet steel, MCB distribution board, 240 V, on surface/recess complete with brass bus bar, neutral bus bar, earth bar, tinned copper bus bar, din bar, interconnections, powder painted including earthing etc. as required. (Dut powder MCB/RCCB/Isolator) 08 way, Double door |
| 52 | Earthing with GI earth plate 600 mm × 600 mm × 6 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre length with |
| 53 | Supplying and laying 25 mm × 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with GI nut, bolt, oxide washer etc. as required. Coating shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50 mm. |
| 54 | Providing and laying of 6 SWG GI Wire at 0.50 meter below ground level for conductor earth electrode, including connection/terminating with GI thimble etc. as required. |
| 55 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.Upto 36 sq. mm |
| 56 | Supply & making end termination with brass compression glands and aluminium lugs for the following size of PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade. 2 × 10 sq.mm (10mm) |
| 57 | (C) PLUMBING WORKSProviding and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.W.C. pan with ISI marked white plastic seat and lid |
| 58 | Providing and fixing wash basin with CI brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of brackets and fittings, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550 × 400 mm with single 15 mm C.P. brass pillar tap |
| 59 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe a) 32 mm dia |
| 60 | b) 40 mm dia |
| 61 | Providing and fixing 8 mm dia C.P./S.S. jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer-in-charge.15 mm nominal bore |
| 62 | Providing and fixing TMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 63 | Providing and fixing toilet paper holder: C.P. brass |
| 64 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work – Exposed on wall 20 mm dia nominal outer dia pipes |
| 65 | 25 mm dia nominal outer dia pipes |
| 66 | Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm15 mm nominal bore |
| 67 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:15 mm nominal bore |
| 68 | Providing and fixing C.P. brass angle valve for basin mixer, and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 69 | Providing and fixing Gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm dia nominal bore |
| 70 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore |
| 71 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 72 | Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia |
| 73 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design. 100 mm diameter P.V.C Pipe |
| 74 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 × 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. 150 × 100 mm size P type With Sewer bricks conforming to IS: 4885 |
| 75 | (D) INTERLOCKING WORKSConstruction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range $75\text{ mm}$ to $0.075\text{ mm}$) having CBR Value-30. |
| 76 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over $50\text{ mm}$ thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as per direction of Engineer-in-Charge. $80\text{ mm}$ thick cement concrete paver block of M-30 grade with approved colour, design & pattern. |
| 77 | (E) BORING & SUBMERSIBLE PUMP OF 1.50 H.P. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender