Tender For Painting And Repairs Of Doors And Windows Of Directorate Of Industries At Middle Point, Sd-Iii, Svpnd, Apwd, Sri Vijaya Puram.
Tender Value
16.56 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
13 days left
EMD
33138
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Painting And Repairs Of Doors And Windows Of Directorate Of Industries At Middle Point, Sd-Iii, Svpnd, Apwd, Sri Vijaya Puram.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 2 | Of area 3 sq. metres and below |
| 3 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). |
| 4 | Superior hardwood Cart-II (A) |
| 5 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including stainless steel butt hinges with necessary screws. |
| 6 | 30mm thick superior hardwood cat-II (A) |
| 7 | Providing and fixing 30mm thick panelled, glazed or panelled shutters for door including Stainless steel Butt hinges with necessary screws with Superior hardwood Cat-II (A) including panelling with 25mm thick superior hardwood cat-II (A) planks etc. complete with wooden cleats & blocks as directed by the Engineer-in-charge. |
| 8 | Painting with oil type wood preservative of approved brand and manufacture: |
| 9 | Old work (one or more coats) |
| 10 | Providing and fixing ISI marked stainless steel sliding door bolts with necessary nuts and screws etc. complete. |
| 11 | 250X16mm |
| 12 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : |
| 13 | 100X58X1.90 mm |
| 14 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 15 | 125 mm |
| 16 | 100 mm |
| 17 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 18 | 150x10 mm |
| 19 | 100x10 mm |
| 20 | Providing 40x5 mm flat iron hold fast 10 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) |
| 21 | Removing and refixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc inlcuding priming coat with approved steel primer all complete. |
| 22 | Fixed to opening/ wooden frames with rawl plugs screws etc. |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 24 | One or more coats on old work |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 26 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 27 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 28 | With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre |
| 29 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 30 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 31 | With cement mortar 1:4 (1 cement : 4 fine sand) |
| 32 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 33 | Finishing walls with Acrylic Smooth exterior paint of required shade: |
| 34 | Old work (Two or more coat applied @ 1.67 Itr/ 10 sqm) on existing cement paint surface |
| 35 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 36 | 50 mm average thickness |
| 37 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. |
| 38 | Bars upto 12 mm diameter |
| 39 | Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100 mm upto 200 mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/ balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. |
| 40 | Upto and including 12 mm dia. |
| 41 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer- In-charge complete in all respect. |
| 42 | Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make |
| 43 | SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer |
| 44 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). |
| 45 | 50 mm average thickness in 3 layers. |
| 46 | Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used) modified plain/reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] with specified average thickness. Note: Rates shall be for finished surface area of concrete and shall include the cost of labour, concrete and appropriate approved Super-Plasticiser for rendering concrete as flowable and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument) |
| 47 | 50 mm thick in Grade M25 with cement content not less than 330 kg per cum |
| 48 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 49 | Weather shed, Chajjas, corbels etc., including edges |
| 50 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 51 | Applying Epoxy Anti-corrosive paint in TMT Bar of approved make as per the direction of Engineer-in-charge. |
| 52 | Providing and fixing 18 mm thick, 150 mm wide pelmet of HDHMR Prelaminated Board, including top cover of 6 mm HDHMR Prelaminated Board, stainless steel pipe 20 mm dia ( heavy type) curtain rod with stainless steel brackets, 03 Nos nickel plated pelmet hanging brackets including fixing with PVC grip and screws etc. all complete as per the direction of Engineer-in-charge. |
| 53 | Wall painting with interior emulsion paint of approved brand and manufacture to give an even shade |
| 54 | Two or more coats on old work Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender