Tender For Day To Day,Petty Repairs,Welcome Maintenance,Periodical Services Joinery Plumbing And Sanitary Work At Otm & Md Accn At Icgs Verval Under Ge I Cg Porbandar
Tender Value
22 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
20 days left
EMD
44000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Junagadh → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day,Petty Repairs,Welcome Maintenance,Periodical Services Joinery Plumbing And Sanitary Work At Otm & Md Accn At Icgs Verval Under Ge I Cg Porbandar
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' |
| 2 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 3 | Material and labor for rendering on concrete/brick surfaces 15mm thick in CM 1:4 surface finished even and smooth without using extra cement complete all as specified and directed |
| 4 | Material and labor for for 10mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and directed. |
| 5 | Material and labor for 5mm thick rendering in Cement Mortar 1:3 on Concrete Surfaces, ceiling etc finished surface Even and Smooth, without using extra cement complete all specified and directed. |
| 6 | M& L for preparation of newly plastered surfaces and Finishing walls with Acrylic Smooth exterior paint of required shade two or more coats applied @ 1.67 ltr/10 Square Metre over and including priming coat of exterior primer applied @ 2.20 Kilogram/10 Square Metre complete all specified and directed. |
| 7 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Square Metre over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Square Metre over new surfaces. |
| 8 | Material & Labour for Preparing ceiling newly Plastered Surfaces of distempering with 1st quality acrylic distemper ( ready mixed) having VOC content less than 50 gms/litre, of of approved manufactured ,of required shade and colour complete as per, manufactures's specification. two or more coats including complete all as specified and directed by Engineer in Charge. |
| 9 | Taking down chowkhat with shutter (without taking off shutter from frames) not exceeding 1.5 Square Metre, complete all as specified and directed |
| 10 | Taking down chowkhat with shutter (without taking off shutter from frames) exceeding 1.5 Square Metre but not exceeding 4 Square Metre Each complete all as specified and directed |
| 11 | Taking down shutters of any description not exc 1.0 Square Metre Each, complete all as specified and directed. |
| 12 | Taking down shutters for any description exceeding 2 Square Metre Each complete all as specifiedand directed |
| 13 | Refixing of shutters including taking down easening and adjusting and also refixing hardware as required including renewal of unserviceable screws etc. of any description n exc 1.0 Square Metre Each, in same opening all as specified and as directed. |
| 14 | Refixing of shutters including taking down easening and adjusting and also refixing hardware as required including renewal of unserviceable screws etc. of any description exc 1.0 Square Metre but n exc 2.0 Square Metre Each, in same opening all as specified and as directed. |
| 15 | Supply and fixing of pressed steel door frame 105x60 mm with one or more rebated incl necessary fixing lugs hings, lock strick , etc complete, as specified and directed. |
| 16 | Supply and fixing of Pressed steel frames size 125x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified and directed. |
| 17 | Supply and fixing of 2nd class H/W plain solid straight chowkhat or frame, wrought framed rebated on the solid, rounded or chamfered put together with flue pinned at joints etc and in position complete, as specified and directed.. |
| 18 | Supply and fixing of, Aluminium anodised sections powder coated for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately. |
| 19 | Material and labor for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in filling of pressed steel door frame complete all as specified and directed |
| 20 | Supply and fixing of 40 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides decorative face veneer with lipping/frame to match complete all as specified and directed |
| 21 | Supply and fixing of factory made 35 mm thick plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed |
| 22 | Supply and fixing of 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and directed and as directed.fitted to chowkhats for doors etc complete. |
| 23 | Material and labor for for Preparation of newly wooden surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer com all as specified. |
| 24 | Material and labor for for Preparation of newly steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint complete all as specified |
| 25 | Supply and fixing of PVC door frame size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinf with MS square tube supplying & fixing in opening as per specification complete all as specified and directed |
| 26 | Supply and fixing of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails . M,S frame shall be covered with heat moulded plain colour PVC ,C, channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails , lock rails and bottom rails on either side and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement , supplying and fising in the frame at site as per specification and drawing. |
| 27 | Supply and fixing of, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specifiedand directed |
| 28 | Supply and fixing of, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specifiedand directed |
| 29 | Supply and fixing of, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed |
| 30 | Supply and fixing of, 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed |
| 31 | Supply and fixing of extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed |
| 32 | Supply and fixing of extruded aluminium alloy handles, fabricated type, anodised of size 125 mm complete all as specified and directed |
| 33 | Supply and fixing of 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and directed |
| 34 | Supply and fixing of door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding complete for door shutters of 850 to 1000mm in width all as specified and directed by Engr-in-charge. |
| 35 | Supply and fixing of 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and directed |
| 36 | Supply and fixing of 125mm hasp and staples,aluminium anodized including bolt to hinges plate and fixed with screws complete all as specifiedand directed |
| 37 | Supply and fixing of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified. |
| 38 | Dismantling boarding any description fixed in any position with nails. |
| 39 | Material and labor for for 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specifiedand directed |
| 40 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified |
| 41 | Supply and fixing of 4.8 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane complete all as specified |
| 42 | Supply and fixing of 4mm thick figured glass, pinn headed type and glazing with oil putty in square n. exc 0.5 Square Metre Each panes complete all as specified |
| 43 | Supply and fixing of, in repair aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specifiedand directed |
| 44 | Supply and fixing of in repair aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed |
| 45 | Supply and fixing of in repair 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed |
| 46 | Supply and fixing of in repair extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed |
| 47 | Supply and fixing of in repairs 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and directed |
| 48 | Material and labor for for mild steel pipe 25 mm dia Drapery rod fancy type with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade as approved by GE all as specified. |
| 49 | Supply and fixing of in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified. |
| 50 | Supply and fixing of, in repairs, double action floor door closer, hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, suitable for aluminium doors and fixed complete all as specified and directed |
| 51 | Supply and fixing of in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding complete for door shutters of 850 to 1000mm in width all as specified and directed by Engr-in-charge. |
| 52 | Supply and fixing of 12 mm thick Toughned Glass as in Partition/kitchen cup board shutter with fittings with cover plate of SS-304 Grade, necessay accessories etc, including aluminium frame ,02 Nos auto close (Firction hinges) for Each shutters complete all as specified and directed and as directed by Engr-in-Charge |
| 53 | Supply and fixing in repairs of 40 mm autoclose concealed hinges, stainless steel, fixed as in repair complete all as specifiedand directed by Engr-in-Charge. |
| 54 | Supply and fixing of Kitchen basket frame work of SS 304 Grade set of size 50 x 50 Cm, including roller plates and internal components etc., fixed as in repair, complete all as specified and directed and as directed. |
| 55 | Supply and fixing ofixed in repair Auto hinges Enox regular, complete all as specified and directed and as directed., fixed as in repair, complete all as specified and directed and as directed. |
| 56 | Supply and fixing ofixed in repair PVC edge beading as in modular kitchen cabinets, fixed as in repairs,complete all as specified and directed |
| 57 | Dismantaling floor hearth or wall tiling/china moisac including cement mortar bedding (but not backing ) , removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 58 | Material and labor for for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed |
| 59 | Material and labor for Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of Each tile exceeding 0.11 Square Metre but not exceeding 0.18 Square Metre as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed |
| 60 | Material and labor for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) are of Each tiles exceeding 0.11 Square Metre but n.exc 0.18 Square Metre mm thick as in vertical surfaces such as dados/skirting etc set and jointed in neat cement slury and in coloured cement to match Coloured on incl plaster (backing coat) 1:4 CM 10mm thick |
| 61 | Material and labor for vetrified ceremic tiles 10 mm thick, in shade as approved (Square/rectangular) polished, area of Each tile not exceeding 0.36 Square Metre, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed. |
| 62 | Material and labor for for Vitriefied ceramic tiles 10mm thick shade as approved (square/rectangular) polished area of Each tiles not exceeding 0.36 Square Metre as in vertical surfaces such as dados/skirting etc set and jointed in neat cement slury and in coloured cement to match Coloured on incl plaster (backing coat) 1:4 CM 10mm thick |
| 63 | Material and labor for for Granite (of any type ) 20 mm thick work (table rubbed and polished ) in steps ,jambs,pilllars,window cill,cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match with shade of Granite laid over 20mm thick screed bed in CM 1:6 complete all as specified and directed |
| 64 | Supply and fixing of in repair PVC connection 450 mm long, 15mm size with PTMT nuts complete all as specified and directed |
| 65 | Supply and fixing of in repair PVC connection 600 mm long, 15mm size with PTMT nuts complete all as specified and directed |
| 66 | Supply & fixing 15mm bore pillar tap long neck, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair complete all as specified and directed |
| 67 | Supply and fixing of in repairs, 15mm bore stop valves (concealed type), chromium plated cast copper alloy, screwed down, high pressure, fancy type, screwed both ends for iron pipe or for unions and fixed, complete all as specifiedand directed by Engr-in-Charge. |
| 68 | Supply and fixing bib cock without flange cast copper alloy chromium plated, fancy type, long body screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed |
| 69 | Supply & fixing 15 mm bore stop valve/angle cock, cast copper alloy, chromium plated,fancy type, heavy duty, screwed down , screwed for iron pipe, fixed as in repairs complete all as specified and directed and directed. |
| 70 | Supply and fixing two way bib cock without flange cast copper alloy chromium plated, fancy type, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed |
| 71 | Supply and fixing central hole Basin Mixer long nack, without pop up waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed |
| 72 | Supply and fixing of Wall mixer (Two in One) for mixing hot & cold water screwed down with chromium plated pipe 1.0 mtr long gancy type, fixed as in repair complete all as specified and directed |
| 73 | Supply & fixing chromium plated shower rose with or without swivel joints 125mm dia including fixing to steel pipe, fixed as in repairs complete all as specified and directed |
| 74 | Supply & fixing chromium plated shower rose with or without swivel joints 250mm x 250 mm square including fixing to 450mm long shower arm, fixed as in repairs complete all as specified and directed |
| 75 | Supply & fixing toilet paper holder with flat recessed type stainless steel, fixed as in repairs complete all as specified and directed |
| 76 | Supply & fixing 100 mm dia chromium plated grating fixed as in repairs complete all as specified and directed |
| 77 | Supply & fixing of PVC waste down pipe of 40mm bore for sink, fixed as in repairs complete all as specified and directed and as directed. |
| 78 | Supply & fixing of PVC waste down pipe of 32mm bore for basin, fixed as in repairs complete all as specified and directed and as directed. |
| 79 | Supply and fixing Chromium plated jet spray with CP connection pipe for EWC 15mm bore with fittings, fixed as in repairs complete all as specified and directed |
| 80 | Supply and fixing of in repair, Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wal hook including making connections and fixed in position, complete all as specified and directed |
| 81 | Supply and fixing of in repairs 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe complete all as spfd |
| 82 | Supply and fixing of in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall Size 915mmx460mm with bowl size 410mm x330mm x 160mm . |
| 83 | Supply and fixing of in repair staniless steel sink 1mm thick without drainage board for kitchen with plug , waste pipe , washers, including cantilever cast iron brackets , connecting union to waste pipe etc, overall size 495x420mm with bowl size 410x330x160mm . |
| 84 | Supply and fixing of in repairs kitchen plate rack made of stainless steel 1mm thick complete size 1200 x 900mm x 200mm width of trade pattern complete all as specified. |
| 85 | Supply and fixing of in repairs, 600mm x 450mm bevelled edge looking mirror of selected quality glass of any size as directed, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated, brass screws and cup washers complete all as specified and directed and as directed. |
| 86 | Supply and fixing of in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, complete all as specified and directed |
| 87 | Supply and fixing of in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, with pedestal complete all as specified and directed |
| 88 | Supply and fixing of in repair vitreous china wash down water closet pan Padestal pattern white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing all as specified and directed. |
| 89 | Supply and fixing of in repairs vitreous china pedastral pattern, Two piece EWCs 640x350x780 mm with 10 Ltr capacity flushing cistern, seat cover and twin flush fittings, white with 'P/S' trap and incl connection to trap, and to flushing pipe anti-syphonage pipe, etc, complete all as specified and directed |
| 90 | Supply and fixing of in repair vitreous China squatting pan of pattern Orissa Pan , size 580 x440 mm white with integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc & making good. |
| 91 | Supply and fixing of in repair vitreous China bowl urinal flat back of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern flush pipe and waste pipe) including connections to flushing pipe and out going pipes etc complete all as specifiedand directed |
| 92 | Supply and fixing of in repair Vitreous china urinal half stall type ,white including connection to flushing pipe and outgoing pipe complete all as specified and directed |
| 93 | S & F of in repairs Soap dish, chromium plated approx size 160mm x 160mm x 90mm complete all as specified and directed |
| 94 | Supply and fixing of in repair Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified. Make- as approved by GE. |
| 95 | Supply and fixing of in repair duroplast seat cover and mild steel chromium plated or aluminium hinging device complete all as specified. Make- as approved by GE. |
| 96 | Supply and fixing of in repair Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and directed |
| 97 | Supply & fixing chromium plated waste fitting 40mm bore for kitchen sinks fixed as in repairs complete all as specified and directed |
| 98 | Supply & fixing chromium plated waste fitting 32mm bore for basin fixed as in repairs complete all as specified and directed |
| 99 | Taking down old steel tubing/CPVC/UPVC & connection including cleaning for refixing for 20mm bore pipe complete all as specified |
| 100 | Taking down old steel tubing/CPVC/UPVC & connection including cleaning for refixing for 25mm or 32 mm bore pipe complete all as specified |
| 101 | Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 including fittings on walls/ceiling or laying in floors complete all as specified. |
| 102 | Supplying and laying of 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 including fittings on walls/ceiling or laying in floors complete all as specified. |
| 103 | Supply & fixing PVC cover for water tank capacity exc. 500 litres but n. exc. 1000 litres including fixing new MS hinges and staples made for purpose, fixed as in repairs complete all as specified and directed |
| 104 | Supply and fixing of in repair 20 mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high densitypolythene float ball and fly nut screwed for iron pipe complete all as specified. |
| 105 | Supply and fixing of in repair 20 mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high densitypolythene float ball and fly nut screwed for iron pipe complete all as specified. |
| 106 | Material and labour for for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of oil bound distemper on wall (white or tinted) complete all as specified. |
| 107 | Material and labor for for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying Two coat of oil bound distemper on wall (white or tinted) complete all as specified. |
| 108 | Material and labor for for complete removal of existing treatment & washing rubbing down and stopping of distempered and painted surfaces incl preparation of old undecorated surface of walls and applying two coats of oil emulsion distempered over 2mm thick wall care putty on wall over priming surafce complete all as specifiedand directed |
| 109 | Material and labor for for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of oil bound distemper on ceiling complete all as specified. |
| 110 | M& L for preparation of old surfaces and Finishing walls with Acrylic Smooth exterior paint of required shade applied @ 1.67 ltr/10 Square Metre over and including priming coat of exterior primer applied @ 2.20 Kilogram/10 Square Metre complete all as specified and directed |
| 111 | M& L for complete removal of existing treatment and preparation of old plastered surfaces and Finishing walls with Acrylic Smooth exterior paint of required shade : old work (Two or more coat applied @ 1.67 ltr/10 Square Metre over and including priming coat of exterior primer applied @ 2.20 Kilogram/10 Square Metre all as speciifed and directed. |
| 112 | Material and labor for for Prepration of old painted surfaces of steel of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed |
| 113 | Material and labor for for preparation of old wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed |
| 114 | Material and labour for for Preparation of old painted plastered or concrete surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed Note : Tint / colour of paint shall be one or multi as directed by Engr-in-Charge as per site requirement. |
| 115 | Supply and fixing of in repairs Aluminium Composite panels in all colours, any shape/CNC cut, of approved brand for external / internal wall cladding at all heights and elevations including necessary aluminium composite panel consist of 3mm thermoplastic core of anti oxidant LDPE sandwitched between two sking of 0.50 mm thick alloy sheet making a total sheet thickness of 4 mm. The surface shall be finished with PU base coating on the top side and service coating on the reverse side shall be with a polymer paint. The system to be fixed to the brick/ stone/ masonry/RCC walls/framed structure with necessaary clamps, bracket and anchor fasteners fixed over and including base frame fabricated with GI square pipe of size 25mm x 25mm with 1mm thickness in 600mm x 600mm size of grid including stainless steel screws, nut bolts, washers, cleats, weather silicon sealent for groove filling, backer rods etc, complete all as per manufacturer instrsuction and all as specified and as directed by Engr-in-Charge. All clamps and brackets shall be hot dipped galvanised minimum 20 microns, (items include cost of GI frame, ACP Panels, CNC cutting, Cramps, weather sealant, gasket, foam, fixtures, scaffolding, all machineries and any fastening strips, nuts, bolts, rivets, washers, etc., complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender