Tender For special Repair Of Agniveer Accommodation For Otm Building Number P-236 In 39 Gtc At Varanasi Cantt, Under Ge (East) Prayagraj.
Tender Value
48.10 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
5 days left
EMD
96200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Varanasi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Agniveer Accommodation For Otm Building Number P-236 In 39 Gtc At Varanasi Cantt, Under Ge (East) Prayagraj.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | M & L for 75mm thick Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in levelling course,for floor benching etc, finished even & rough to receive cement mortar screed bed complete all as specified and directed. |
| 3 | M&L for Vitrified Heavy duty outdoor tiles 30 cm x 30 cm x 20 mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigment including 15 mm thick screed bed 1:6 complete all as specified and directed. |
| 4 | M&L for 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) in plinth protection,, finished even and smooth without using extra cement, complete all as specified and directed. |
| 5 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing tiles and rubbish off the premises complete all as specified and directed. |
| 6 | M & L 15 mm thick terrazzo topping with 4 to 7 mm size marble aggregate including grinding and polishing in floors with white cement and pigment complete all as specified and directed. |
| 7 | M & L for Glass dividing strips 3mm thick of width upto 38mm complete all as specified and directed. |
| 8 | M&L Machine cut Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed. |
| 9 | M&L Kota stone slab 18-20 mm thick in riser of steps, skirting , dado and pillar laid over cement screed base with grey cement mixed pigment to match the shade of slab including rubbing and polishing over and including 10mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed. |
| 10 | M&L for Mirror polishing on existing marble/ granite/ Kota stone/ stone work where ever required to give glossy finish complete including all necessary repair work and filling of joints with grey cement mixed with pigment to match the shade complete all as specified and directed . |
| 11 | Demolition of brick work built in cement or cement lime mortar complete all as specified and directed. |
| 12 | M&L Brick work with Fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 13 | M&L Brickwork with Fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls, built in built in CM 1:4 complete all as specified and directed. |
| 14 | Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 15 | M&L Rendering 10 mm thick in cement mortar 1:6 on brick work or concrete surfaces, finished even and smooth complete all as specified and directed. |
| 16 | M&L Rendering 15 mm thick in cement mortar 1:4 on brick work or concrete surfaces, finished even and smooth complete all as specfied and directed. |
| 17 | M&L Rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even and smooth complete all as specified and directed. |
| 18 | M&L preparing new plastered or unplastered surfaces of walls and applying two coats of interior acrylic emulsion for smooth wall finish in approved colour/shade over a coat of primer over wall care putty after preparation of surfaces complete all as specified and directed . |
| 19 | M&L preparing new plastered or unplastered surfaces of ceiling after preparation of surfaces and applying three coats of white wash complete all as specified and directed. |
| 20 | M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or mechanical means, including filling depressions of scrapped surfaces and preparing old decorated plastered surfaces of wall including cornices, pilastered etc. and applying two coats of interior acrylic emulsion over one coat of primer over 1mm wall care putty on wall surface complete all as specified and directed. |
| 21 | Complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed. |
| 22 | Material and labour for 1mm thick wall care putty on old /new surfaces with one coat of acrylic water based exterior grade primer @0.9 ltrs (undiluted)/10sq mtrs diluted with water 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed.Name of Manufacturer : ASIAN/BERGER/NEROLAC or equivalent make as mentioned in Appx 'D'. |
| 23 | Material and labour for two coats of water based premium acrylic smooth exterior emulsion of approved color on old/new primed surfaces with silicon additive & color stay technology excellent dirt pick up resistance with low VOC less than 50 gram/ltr as per the LEEDS specification anti algai properties in two or more coats @ 1.79 ltrs (undiluted)/10sq mtrs diluted with water as per manufacturer's instruction applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and capable of operating single spray gun with a maximum hose length of 30 m. the spray machine should be of reputed paint manufacturer as mentioned in PS and accessories for applying emulsion should be able to spray in hard to reach areas and penetration of emulsion on the surface using auto roller for making the surface uniform complete all as specified and directed. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.Mame of Manufacturer : ASIAN/BERGER/NEROLAC or equivalent Work shall be carried out by the authorised applicator of main manufacturer under his supervision and contractor shall submit certificate issued by the manufacturer to the Eng-in-Charge. |
| 24 | M&L for complete removal of existing treatment (any number of layers) from old surfaces of ceiling and applying two coat of white wash complete all as specified and directed. |
| 25 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specifeid and directed. |
| 26 | M &L 14-16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. with and including 15mm thick screed bed in CM 1:4, complete all as specified and directed . |
| 27 | Taking down chowkhat with shutters (W/O taking off shutters from the frame) n exc. 1.50 Sqm not exc 4.00 sqm complete and all as specified and directed |
| 28 | Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, and removing from site, complete all as specified and directed . |
| 29 | Taking down shutters of any description not exceeding 1.00 Sqm and removing from site, complete all as specified and directed. |
| 30 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawl strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC oil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of requiredsize with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges shall be paid separately) |
| 31 | S&F 30mm thick plain WPC factory made glazed Skeleton door shutters (conforming as per IS-4020) with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door to be panelled with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose. Door should be fixed with SS hinges and SS screws. Door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as per manufacturers specification & drawings & as directed by Engr-in-charge.Note- Stainless steel wire mesh shall be measured and paid separately. |
| 32 | S&F 125 x 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed. |
| 33 | S & F Rolled mild steel sections ordinary quality conforming to Gde Fe-290-E (Grade E-165) as in framing for cladding, glazing and the like including door frames/chowkats, Cooler stand etc. fixed with angle cleats and connecting plates, etc complete all as specified and directed. |
| 34 | M & L for PCC (1: 2: 4) type B-1 using 20mm for filling in door frames and grout of truss section complete all as specified and directed. |
| 35 | M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in hold fast including necessary form work complete all as specified and directed. |
| 36 | S&F in repair 150 mm long SS Tower bolt, complete and all as specified and directed |
| 37 | S & F 100mm SS handles, complete all as specified and directed. |
| 38 | S & F 150mm SS handles, complete all as specified and directed. |
| 39 | S & F 100mm SS barrel tower bolts fixed as specified and directed. |
| 40 | S & F 200mm SS barrel tower bolts fixed as specified and directed. |
| 41 | S & F 300 mm SS sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet fixed as specified and directed. |
| 42 | S&F Hasp and staple 150 mm size, safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate, fixed with screws in repair complete all as specified and directed. |
| 43 | S&F only Second class hard wood small fittings such as brackets of any type, shaped door and window stops and the like, including all necessary labours, articles not exceeding 200 cu. cm each complete all as specified and directed. |
| 44 | S&F Butt hinges, medium weight, cold rolled stainless steel, 50 mm size complete all as specified and directed. |
| 45 | S&F Butt hinges, medium weight, cold rolled stainless steel steel, 100 mm size complete all as specified and directed. |
| 46 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete and all as specified and directed |
| 47 | Dismantling boarding any desccription fixed in any position with nails or any other means complete all as specified and directed |
| 48 | Providing and fixing 18mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powcler/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being Termite/borer proof, water/moisture proof and Fire retardant. WPC to be laminated with PVC oil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel hinges shall be paid separately) |
| 49 | Providing and fixing 12 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In-Charge. |
| 50 | S&F Powder Coated aluminium frame for doors, windows, ventilators powder coated (thickness of powder coating not less than 50 micron) with one or more rebates including jointing cleat for fixing etc complete all as specified and directed. |
| 51 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Note:-1. The rate is inclusive of all fixings of builders hardware such as hinges, bow handles, locking arrangements rubber beading for fixing of glass etc complete all as directed by Engr-in-Charge. 2. Glass and wiremesh shall be measured and paid separetely. |
| 52 | S&F 3mm thick sheet glass ordinary quality and glazing with rubber packing in squares n exc. 0.50 Sqm in each panes complete all as specified and directed. |
| 53 | S&F in repair fancy type drapery rod 20 mm dia stainless steel incl end brackets, and side brackets, complete all as specified and directed. |
| 54 | S&F Framed work Roof trusses (framed) Fe-410-W-(Gde-E-250) quality-A, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed |
| 55 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with welf tapping screws complete all as specified and directed. |
| 56 | M&L Preparing new surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 57 | M&L Preparing new steel & iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 58 | M&L Preparing old steel & iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 59 | Demolition and breaking up drain pipes Internal dia of pipe in 150 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar ® complete all as specified and directed. |
| 60 | M&L for 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed as specified including Bends and taper bends, any radius complete all as specified and directed. |
| 61 | M&L concrete bed to 150 mm bore drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in, PCC 1:3:6 type C2 using 40mm graded stone aggregate complete all as specified and directed. |
| 62 | M&L for Plain cement concrete, 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels or drains, complete all as specified directed. |
| 63 | M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc, complete all as specified directed. |
| 64 | M&L for 10mm thick in CM 1:3 rendering on fair faces of concrete surfaces /roof top mixed with liquid water proofing compound finished even and smooth without using extra cement complete all as specified and directed. Note :- Liquid WPC shall be measured and paid separately. |
| 65 | M&L preparation of newly plastered surfaces of roof including cleaning the surfaces by using wire brush/ pressure hose and applying high performance polyurethene liquid membrane waterproofing coating in two coats @ 1.5 Kg/Sqm/ 2 coats spray/ brush applied, with an elongation of 300% to 700% and tensile strength of not less than 3 N/Sqmm as per ASTM D412 and ASTM D2370, crack bridging ability of 3.5mm as per ASTM C1305, shore a hardness of not less than 60 as per ASTM D2240. The item includes applying epoxy primer @ 0.15Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet, complete as per manufacturer's instrructions complete all as specified and directed.Note:1. The contractor shall submit a gurantee of 10 years the date of completion of work for waterproofing treatment alongwith manufacturer's guarentee. The amount of Rs. 40 (Forty) oer Sqm and min of Rs. 4000/- for waterproofing treatment shall be withheld from contractor's final bill till the expiry of gurantee period. The contractor at his own option may furnish fix deposit receipt pledged in favour of GE(E) Prayagraj against gurantee money.2. The water proofing shall be carried out by authorised applicator of manufacturer. The name of applicator shall be got approved from GE before commencement of work. |
| 66 | M&L for providing damp proof layer on all external walls upto cill level(outside & inside) in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.50 kg/ Sqm of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering. On dried plastered walls apply single coat Penetrative cum film for internal walls that provides best in class solution to the problem like dampness and efflorescence.Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved. |
| 67 | Supply only liquid integral water proofing compound complete all as specified and directed. |
| 68 | Taking down carefully aluminium, copper batten point wiring(light,fan,socket or power complete) and making good disturbed surface of wall floor complete all as specified and directed. |
| 69 | Taking down carefully Submain and making good disturbed surface of wall floor complete all as specified and directed. |
| 70 | M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer/exhaust fan point controlled by one, one way switch, including concealed electrogalvanised steel terminal box of required size not less than 1.0 mm thick factory made, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed. |
| 71 | Ditto- all as item No. 70 here-in-before but one 3 pin, 5amp socket out let on independent board complete all as specified and directed. |
| 72 | Ditto -all as item No.70 here-in before but 3pin ,5amp socket out let on the same board with other switch complete all as specified and directed. |
| 73 | Ditto -all as item No.70 here-in before but 5pin ,15/16 amp socket out let on independent board with using 2.5 sqmm cable complete all as specified and directed. |
| 74 | M&L sub main wiring with two single core PVC insulated & unsheathed cable 6.0 Sqmm (nominal area) FRLS type having multi-stranded copper conductor drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring with and including 4.0 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as earth wire connected to common earth as per IS & cutting chasing for conduit & sinking for boxes & making good to walls disturbed surface & applying finishes to match existing surface complete all as specified and directed.NOTE : Two runs of 6 Sqmm and one run of 6.0 Sqmm cable and PVC conduit shall be measured as a one unit length. |
| 75 | S & F for switch piano, flush type, 5 amps, single pole , one way , 230 volt complete all as specified and directed. |
| 76 | S & F for 2/3 pin, 5 Amp/ 6 Amp , socket outlet, flush type, 2 in 1 complete all as specified and directed. |
| 77 | S&F lamp holder PVC/Polycorbonate type with cord grip cap/back plate suitable for batten/angle /pendent fitting complete all as specified and directed. |
| 78 | S&F LED retrofit Invertor lamp of capacity 12/9 watt, B-22 holder base with polycabonate body and aluminium heat sink warm white complete including taking down old/ unserveciable CFL/bulb complete all as specified and directed. |
| 79 | S&F switch socket combination 2 in 1, 6 pin 16Amps multipurpose type 240 volts complete all as specified and directed. |
| 80 | S&F ceiling rose single phase , PVC poly carbonate, insulated body three terminals ISI marked complete all as specified and directed. |
| 81 | S&F stepped type electronic fan regulator flush type AC 230 volt suitable for any type of ceiling fan complete all as specified and directed. |
| 82 | S&F for sheet metal enclosure factory made for MCB DB's SPN, 8 way, double door, 240 Volts with 200 Amp rated bus bars including taking down existing unserviceable MCB DB complete all as specified and directed. |
| 83 | S&F TPN DB double door 4 way 415V incl busbar double door and other accessories without MCB complete all as specified and directed. |
| 84 | S&F MCB SP 240 Volt 6 to 32 Amp ISI marked conforming to 'C\\" curve, breaking capacity 10 KA complete all as specified and directed. |
| 85 | S&F MCB SPN 40 amp 240 Volt ISI marked conforming to 'C\\" curve, breaking capacity 10 KA complete all as specified and directed. |
| 86 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below normal ground level) connected to galavanised earth lead wire 4.0 mm dia (7.5m) as means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISImark) light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing of earthing & dismantling /taking down existing old / unserveciable earthing complete all as specified and directed. (Note:- The rates quoted shall also deemed to include the cost of Earth test point and earth wire and protection pipe upto 7.5 meter beyond the earth plates electrode.) |
| 87 | S&F DB VTPN 6 ways with metal double door ,IP -43 protection suitable for 100 Amp MCCB as incommer and TP as out going VTPN DBs 415 volts 3 phase complete with appropriate size copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good disturbed wall/surfaces all as required at site & directed by Engr-in-Charge |
| 88 | Supply and fix MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KA complete all as specified and directed. |
| 89 | Supply and fix MCCB 4 Pole, 415 V, Adjustable type, 63 Amps with breaking capacity 16 KA complete all as specified and directed. |
| 90 | S& F LED tube light fitting, 20/22 Watt ,decorative type, slim alluminium square profile, high lumen output energy efficient ,direct surface mounting including connecting up with twin core PVC insulated copper conductor of suitable size, complete all as specified and directed. |
| 91 | S&F LED integral ultra slim round shape surface mounting high power LED luminaire , dome shape opal diffuser lamp of capacity 18W complete including taking down old/ unserveciable CFL/bulb complete all as specified and directed.Make: Havells Cat part No LHEAABP6IL1W018 and Wipro Cat part No. LD80-171-XXX-60-SM or equivalent make as mentioned in Appx 'D'. |
| 92 | Supply and Fix Single pole and neutral enclosure with a three pin and earth plug and socket complete with one single pole MCB single pole 20 amp complete all as specified and directed. |
| 93 | Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. |
| 94 | S & F Building security/street LED light fitting 35 watt IP-65 protection pressure diecast alluminium body ,heat resistant glass ,including driver and making necessary electric connection with 2.5 sqmm twin core copper wire 1.5 long complete fixed in GI pipe fixed to bldg complete all as specified and directed. |
| 95 | Supplying ,laying, commissioning & testing cross sectional area 50 Sqmm , 3.5 core service cable connection cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down existing old /unserveciable cable complete all as specified & directed. |
| 96 | Excavation in trenches in soft/loose soil not exceeding 1.5 M wide and not exceeding 1.5 Mtr deep and getting out including filling bottom surface to required level or slope for laying of pipes/ cables complete all as specified and directed. |
| 97 | Returning filling including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft soil complete all as specified and directed. |
| 98 | Removing excavated surplus soil not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed. |
| 99 | M&L for sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed. Note : Punned thickness 18 cm shall be measured only. |
| 100 | Supply and laying dry well burnt locally available brick sub class 'B' modular bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed. |
| 101 | M & L for bore hole for passing cable through / insertion of 40/50 mm dia GI pipe under PCC road/ taxi track/ runway/ hard standing upto the depth 450mm to 1200 mm complete all as directed by Engineer-in-charge.NOTES :-(i) Cost of equipments, tools & plants,material required for boring shall be deemed to be included in unit quoted rates above. (ii) GI pipe shall be measured and paid separetely. |
| 102 | S &F for 40 mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hard standing including taking out old /unserveciable existing pipe complete all as specified and directed. |
| 103 | Taking down carefully ceiling fan by disconnecting all electrical connection, sealing cable end, dismantling blades and removing fan and blades to store(NOTE: Existing fans shall be deposited by the contractor in AGE E/M Varanasi yard). |
| 104 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply earthing complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 04, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender