Tender For Certain B/R Repair To Walls, Floor, Water Fitting And Allied Works In Depot And Domestic Area At Mil Stn Unchibassi Under Ge South Pathankot
Tender Value
25 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
19 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshiarpur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain B/R Repair To Walls, Floor, Water Fitting And Allied Works In Depot And Domestic Area At Mil Stn Unchibassi Under Ge South Pathankot
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Concrete of any description (unreinforced) and in any position, complete all as specified and directed. |
| 2 | M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in padding over roof slab for providing proper slope, and finishing the surfaces even & smooth without using extra cement, complete all as specified and directed. |
| 3 | M&L for liquid water proofing treatment to RCC roof slab including dismantling of existing treatment of any description in following procedure : (a) Laying 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement on fair faces of concrete roof surfaces , finished even and fair to receive treatment on roof Complete (b) Applying first coat fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with sun reflective index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 Mpa and shall have reack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree celsius with 3.3% dilution as priming coat (c) laying of fiber mesh 0.3mm thickness weave in leno pattern having weight 4.5 gm/ Sqm and pasting it properly with overlap of 50mm and allow it to dry (d) Applying second coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge (e) Applying third and final coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster) |
| 4 | Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed. |
| 5 | M&L for brick work in cement mortar 1:4 of old size sub class ‘B' bricks straight or curved on plan exceeding 6mtr mean radius complete all as specified and directed. |
| 6 | All as per description of serial item No. 05 here-in-above but except bricks complete all as specified and directed |
| 7 | M&L for brick work in cement mortar 1:6 of old size sub class ‘B' bricks straight or curved on plan exceeding 6mtr mean radius complete all as specified and directed. |
| 8 | All as per description of serial item No. 07 here-in-above but except bricks complete all as specified and directed |
| 9 | M&L for 50mm thick PCC, type C-1, 1:3:6, (using 20mm graded crushed stone aggregate) as in flooring finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound of grade 'B' complete all as specified and directed |
| 11 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exceeding 1.50 Sqm each including taking out hold fast embedded in PCC complete all as specified and directed. |
| 12 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 Sqm and n.exc 4 Sqm each including taking out hold fast embedded in PCC complete all as specified and directed. |
| 13 | Taking down shutters of any description exc 1.00 sqm and not exc 2.00 Sqm each complete all as specified and directed. |
| 14 | Taking down shutters of any description n exc 1.00 sqm complete all as specified and directed. |
| 15 | S&F in repairs 25 mm dia stainless steel curtain rod design/shape approved by Engr-in-charge complete all as specified and directed. . |
| 16 | S&F in repair stainless steel bracket (turned, weathered and mitered) brackets of with cut, hole suitable for 25mm dia rod fixed with screws and gutties in wall complete all as specified & directed. |
| 17 | All as per serial item No. 16 here-in-before, but end caps with wall ornament and fixed to curtain rod with screws of design/shape all as specified and directed . |
| 18 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frame/Chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 19 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S Sscrews shall be paid separately) |
| 20 | S&F prelaminated 18mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet as in cabinet, shutter and similar work having high natural fiber content 25 to 30% wood colour sheets with density not less than 500 Kg/Cum and the weight of sheet of 1 sqm should be 11 Kg (+-5%) manufactured by ISO 9001-2015 certified company the sheet should be 100% water proof termite proof, fire retardant, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete as per direction of Engineer-in-charge. |
| 21 | S & F Continuous (Piano) type hinges mild steel bright finish or electro galvanized with wide of flaps 30mm complete all as specified and directed. |
| 22 | S&F hasp and staple aluminium anodised 100 mm long with mild steel hinge pin including bolt to hinge plate and fixed with screw complete, |
| 23 | M&L for Preparation of new steel surfaces of any description exc 10cm width or girth priming with red oxide zinc chrome and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 24 | M&L for Preparation of old painted wooden surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 25 | M&L for Preparing wood or wood based new or untreated surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 26 | Providing & fixing 12mm thick semi perforated micro tegular edged GRG false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 tmm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge, including Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness at any height, including cover fillets complete all as specified and as directed. |
| 27 | S&F solid PVC Wall lining consisting of 5mm thick printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame work as per specifications and drawings including taking down of old PVC wall lining, preparation of surface, complete all as specified and directed. |
| 28 | S&F 5 mm thick PVC sheet fillets of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing including taking down of old PVC sheet fillets, complete all as specified and directed. |
| 29 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 30 | S&F Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles) with 5 mm thick moulded prelam PVC sheet on the front face and 5 mm prelam PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 31 | S&F pressed steel frame for doors made out of MS sheet 1.25mm thick of size 125mmx60mm for with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkhats complete all as specified and directed. |
| 32 | Material & Labour Factory Made Box type steel windows having Glazed & gauzed shutters ,with rectangular tubular frame factory made of ERW tube of size 79mmx39mm, 16 gauge tubular frame with side hung shutter with glazing bars 12mm x 3mm flat iron, with 04 Nos MS steel lugs of 20mm x 5mm MS flat 200mm long over all welded to frames & PCC blocks in PCC (1:2:4) type B1 for embedding lugs with & including projecting type hinges with steel handle and steel peg stay dovetailed or welded, including 2 Nos tower bolts 100mm long to each shutter and MS grili 10mm square bar spacing 100mm centre to centre , 04 Nos MS steel lugs of 20mm x 5mm MS flat 200mm long over all welded to frames & PCC blocks in PCC (1:2:4) type B1 for embedding lugs complete, with & including two coats of synthetic enamel paint over one coat of red oxide prime all as specified & pattern shown in drg No CEPZ/ID-245/01 and 246/02 sheet 1/2 & 2/2; complete all as specified and directed by Engineer -in-Charge. |
| 33 | S&F 30mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, fitted to chowkats complete all as specified and directed. |
| 34 | S&F 30mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed. |
| 35 | S&F 30mm thick 2nd class hard wood in glazed and Skelton factory made shutters open rebated and prepared to receive glass/wire gauge etc. with sash bars edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/wire mesh etc. sizes of members as per clause 8.24(a) of SSR Part-I complete all as specified and directed. |
| 36 | S&F in repair 300mm ordinary rat rail, rod pattern mild steel springs ISI marked including roller and roller plate complete including all necessary welding if required complete all as specified and directed. |
| 37 | S&F 150mm long aluminium, anodized barrel tower bolts of extruded section ISI marked complete all as specified and directed. |
| 38 | S&F 150mm extruded aluminium alloy handle fabricated anodized ISI marked complete all as specified and directed. |
| 39 | S&F 100mm long butt hinges medium weight cold rolled ISI marked mild steel, complete all as specified and directed. |
| 40 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 41 | M&L for Double action floor spring hydraulically regulated madeup of minimum 1.25 mm thick aluminium alloy sheetfoundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed. |
| 42 | S&F in repair cast iron body door closer hydraulically regulated designation No 2 universal type of dia cast body, suitable for door shutter of 701 to 850mm in width and of weight between 36 to 60 kg complete all as specified and directed. |
| 43 | S&F floor door stopper of overall length of cover plate 140mm or 150mm aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 44 | S&F for aluminium mortice lock, vertical type 75mm size of 4 lever, complete all as specified and directed. |
| 45 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and directed. |
| 46 | S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes complete all as specified and directed. |
| 47 | S&F in repair galvanized mild steel wire cloths 0.56mm nominal dia and average width of aperture 1.18mm & fixed with tint tacks or galvanized wire staples complete all as specified and directed. |
| 48 | S &F 4mm thick selected quality float sheet glass including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. in aluminum partition / doors / windows / ventilators etc. complete all as specified and directed. |
| 49 | S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. with Powder Coating (minimum thickness of powder coating 50 micron & min weight not less than 0.55 kg/Rm), complete all as specified and directed. |
| 50 | S & F Powder coated Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including powder coating of any colour (Thickness or powder coating not less than 50 micron), complete all as specified and directed. |
| 51 | S & F powder coated Anodised aluminium window and ventilator shutters, side hung type without or with sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type 100mm long (2 no.) suitable handle (1 no.) include powder coating of any colour (Thickness or powder coating not less than 50 micron), complete all as specified and directed. |
| 52 | S & F Anodised designer grill of 7mm dia fixed with and including flat section of size 50x1.5mm fixed to aluminium window complete all as specified and directed. |
| 53 | S&F in repair Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal in back in cement; fixing automatic cistern with brackets, flush pipe, grating and union for discharge pipe, complete all as specified and directed. |
| 54 | S&F in repair for Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat cover white colour or in matching colour with closet closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed. |
| 55 | S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 110mm bore PVC 'P' or 'S' trap complete incl making good to floor complete all as specified and directed. |
| 56 | S&F in repair Vitreous China wash down water closet pan and trap with flushing cistern, (pedestal pattern in one piece) including fixing bolts and connecting to drain pipe, including white seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti symphonic pipe etc complete all as specified and directed and including 'P' and 'S' trap complete including making good to floor, complete all as specified and directed. |
| 57 | S&F in repair vitreous china wash hand basin (flat back or angle back type) coloured of bowl size 550mmx400mm including waste and waste pipe PVC 32mm dia to be fixed on iron brackets complete all as specified and directed. |
| 58 | S&F in repairs 10 liters PVC low level flushing cistern( white colour) syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm dia flush pipe with coupling and fixed complete all as specified and directed. |
| 59 | S&F in repairs brass chromium plated shower rose 75mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 60 | S&F in repair of CP health faucet with ABS body, 1.25 mtr long flexible tube & hook fixed with and incl CP screws complete all as specified and directed. |
| 61 | S&F PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed. |
| 62 | S&F grating square 150mm size of PTMT (minimum weight 50gms) as in repair, complete all as specified and directed. |
| 63 | S&F in repair 20mm PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed. |
| 64 | S&F in repair bib taps, long body fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore, complete all as specified and directed. |
| 65 | Supplied and fixed in repairs Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and as directed |
| 66 | Supplied and fixed in repair stop valves (ISI marked), 15mm dia, cast copper alloy, chromium plated fancy type with long shank and cup(concealed type) screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe, complete all as specified and directed. |
| 67 | S&F in repair pillar tap chromium plated fancy type Swan Neck with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed. |
| 68 | S&F in repairs 15mm bore Angle valve, cast copper alloy fancy type chromium plated ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed complete all as specified and directed. |
| 69 | S&F in repair square shaped towel ring of CP fixed with and including Chromium plated brass screws and plastic cleats complete all as specified and directed. |
| 70 | S&F in repair mild steel, chromium plated Soap Dish fixed with and incl CP screws all as specified and directed. |
| 71 | S&F 5.5mm thick glass shelf 12cm wide with cp bracket guard and 60cm long CP railing including chromium plated brass screws and wooden/plastic cleats as in repair, complete all as specified and directed. |
| 72 | S&F looking mirror 5mm thick glass of selected quality with beading complete design/shape will be approved by Engineer-in-Charge complete all as specified and directed. |
| 73 | S&F Rotational moulded polyethylene water storage tank two layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PTMT valve 20mm high pressure with polyethylene float and fly nuts including dismantling water tanks (capacity of tank exc. 250 ltr but n. exc. 500 ltr) and removing from site complete all as specified and directed. |
| 74 | S&F Rotational moulded polyethylene water storage tank two layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PTMT valve 20mm high pressure with polyethylene float and fly nuts including dismantling water tanks (capacity of tank exc. 500 ltr but n. exc. 1000 ltr) and removing from site complete all as specified and directed. |
| 75 | S&F GI tube 20mm bore medium grade galvanized with all fitting and fixed to short length including taking up or down GI pipes 20mm bore and connection including removal un-serviceable pipe complete all as specified and directed. |
| 76 | S&F 15mm bore GI tubing medium grade galvanized ISI marked with all fittings complete on walls including taking up or down GI pipe 15mm bore and connections, including removal unserviceable pipe complete all as specified and directed. |
| 77 | M&L for cutting chases, pinning in brick work for concealed water tubing and making good to facings where required and pointed in cement mortar 1:3 cutting not exceeding 10cm girth, complete all as specified and directed. |
| 78 | M&L for providing glazed ceramic coloured wall tiles of size 450mmx350mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 including dismantling of wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises, complete all as specified and directed. |
| 79 | M&L for Non skid ceramic colour tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling of floor tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises complete all as specified and directed. |
| 80 | M&L for Non skid ceramic colour tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:4 including dismantling of floor tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises complete all as specified and directed. |
| 81 | M&L for vitrified ceramic tiles, light shade 7 mm to 8 mm thick ( sq/ rect) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off premises, complete all as specified and directed. |
| 82 | Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water complete all as specified and directed. |
| 83 | M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement complete all as specified and directed. |
| 84 | M&L for 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement including scaffolding at any height complete all as specified and directed |
| 85 | M&L for applying two coats of oil bound distemper over one coat of primer as on walls surfaces including preparation of new plastered surface complete all as specified and directed |
| 86 | M&L for preparation of old plastered or unplastered surfaces of wall including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc. and applying two coats of oil bound distemper on wall, complete all as specified and directed. |
| 87 | M&L for preparation of old plastered or unplastered surfaces of wall including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc. and applying one coat of oil bound distemper on wall, complete all as specified and directed. |
| 88 | M&L for preparation of New plastered surfaces of wall including scaffolding up to 7m height, two coats of cement base paint on newly plastered surfaces of wall including preparation of surfaces and curing after applying each coat, complete all as specified and directed. |
| 89 | M&L for preparation of old plastered or unplastered surfaces of wall including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc. and applying one coat of cement base paint on wall including curing, complete all as specified and directed. |
| 90 | M&L for preparation of old surfaces of wall including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying Two or more coats of 100% Premium acrylic emulsion paint (In camouflage pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces of walls all as specified & directed by Engr-in-Charge. |
| 91 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 92 | M&L for machine cut kota stone, stone slab flooring 16-18 mm thick over screed bed 20mm thick in cement mortar 1:4 set, jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including, rubbing and polishing complete all as specified. |
| 93 | M&L machine cut kota stone, stone slab flooring 16-18 mm thick over 15 thick cement mortar 1:4 set, jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including, rubbing and polishing but in vertical skirting complete all as specified and directed. |
| 94 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 95 | M&L for 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like fixed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.Note:- The rate included for making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded. |
| 96 | M&L for Non abrasive paving (rectified endura) cement concrete coloured tiles 300x300mmx10mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15mm thick screed bed in cement mortar 1:4 including demolition/ dismantling old surface/ tiles complete all as specified and directed. |
| 97 | M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in copings, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed |
| 98 | Dismantling/taking down of cast iron or unreinforced concrete or PVC soil waste and drain pipe 75mm or 100mm dia with all fittings complete all as specified and directed. |
| 99 | S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints as in repair, fixed to walls with sufficient number of Iron stack clamp complete all as specified and directed. |
| 100 | S&F of 110mm bore pipes, PVC (SWR) bends any radius for PVC (SWR) pipes as in repair complete all as specified and directed. |
| 101 | S&F in replacement 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed. |
| 102 | Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings, complete all as specified and directed. |
| 103 | S&F Prepainted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws, complete all as specified and directed. |
| 104 | S&F pre painted galvalume aluminum zinc coated GI based plain steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws, complete all as specified and directed. |
| 105 | S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofs, walls etc complete all as specified and directed. |
| 106 | S&F Asbestos cement one piece plain angular ridge 6mm thick fixed with L-type or J-type or cranked hook bolts complete all as specified and directed |
| 107 | S & F Magnetic door catches with sticking plate of standard size for cupboard doors as approved by GE. |
| 108 | Dismantling wrought iron or mild steel work of any description. |
| 109 | M&L Vitrified Ceramic tiles any shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in cement mortar 1:6 including dismantling of floor tiling incl cement mortar bedding (but not backing) removing serviceable tiles complete all as specified. |
| 110 | M&L Vitrified Ceramic tiles any shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement and sand mortar 1:3, including dismantling of wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles, complete all as specified. |
| 111 | S & F in repairs 10mm smoke & toughened glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required stainless steel brackets complete all as specified and directed |
| 112 | M&L for mild steel work Roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 113 | Note: (i) In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.(ii) The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender