Tender For Repair And Maintance Of Mini Power Pump And Power Pumps In Ward No: 23,24,25,26 And 27 In Zone Ii, Vellore Corporation
Tender Value
5 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
5 days left
EMD
10001
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vellore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintance Of Mini Power Pump And Power Pumps In Ward No: 23,24,25,26 And 27 In Zone Ii, Vellore Corporation
BOQ
| Sl. No. | Item Description |
| 1 | Removing the submersible pumpset and its accessories from the bore well 1 to 2.5 HP including all material charges and all labour charges etc., complete as per standard specifications. |
| 2 | Rewinding of burnt motor of Submersible type pump set. The work includes the cost of winding wires, sleeves, connection wires and other required winding materials, dismantling, assembling, testing etc., complete (The cost towards the old materials should be deducted) upto 2.5HP |
| 3 | Re-erection of submersible pumpset into the borewell after attending the repairs 1 to 2.5 HP including all material charges and all labour charges etc., complete as per standard specifications. |
| 4 | Removing the submersible pumpset and its accessories from the bore well 7.50 Hp to 10.00 HP including all material charges and all labour charges etc., complete as per standard specifications. |
| 5 | Rewinding of burnt motor of Submersible type pump set. The work includes the cost of winding wires, sleeves, connection wires and other required winding materials, dismantling, assembling, testing etc., complete (The cost towards the old materials should be deducted) 7.50 Hp to 10.00 HP |
| 6 | Re-erection of submersible pumpset into the borewell after attending the repairs 7.50 Hp to 10.00 HP including all material charges and all labour charges etc., complete as per standard specifications. |
| 7 | Transportation of pump set to the workshop from the site and back to the site from workshop 2.5 HP to 10.00 HP including all material charges and all labour charges etc., complete as per standard specifications. |
| 8 | Servicing, commissioning and testing of submersible motor 1 to 2.5 HP including all material charges and all labour charges etc., complete as per standard specifications. |
| 9 | Servicing, commissioning and testing of submersible Pump 1 to 2.5 HP including all material charges and all labour charges etc., complete as per standard specifications. |
| 10 | Servicing commissioning of all accessories in the panel board such as starter, main switch, volt meter, ammeter etc, and rectifying the electrical defects (excluding cost of materials) 1.5 to 10 HP |
| 11 | Removing the Trapped Submersible motor pumpset in the Borewell using Chain Pully including all Material and Labour Charges etc., Complet |
| 12 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mm x 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25mm x 3 mm including cuting, welding, grinding, locking arrangements and labour charges etc., complete |
| 13 | Supply and delivery of 2HP Submersible motor pumpset in single phase as per IS 8034 without panel board for 20 LPm x 100m Head including all material charges and labour charges etc., complete as per TWAD Specifications. |
| 14 | Labour charges for the erection of 2 hp submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 15 | Supply and delivery of 7.50 HP submersible motor (50LPM x 100mm head) for ISI make in good quality without Panel board including cost of all material charges etc complete as per IS 8034/1989 standerd specification. |
| 16 | Erection of 7.50 HP submersible motor (50LPM x 100mm head) for ISI make in good quality without Panel board including cost of all material charges etc complete as per IS 8034/1989 standerd specification. |
| 17 | Supply and delivery of 4.00sqmm flat cable including all cost and labour charged etc., complete as per standard specifications |
| 18 | Supply and Delivery of 25mm 'U' PVC pipe with ISI Mark including all cost of all material charges and all labour charges etc., complete as per standard specifications. |
| 19 | Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amendedthereafter with suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole MagneticContactor with under Voltage protection, Indication lamp, starting capacitor, running capacitorand On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVCinsulated cable, powder coated vermin proof box including the capacitor (the cost of capacitoris to be taken separately).. (WD-M1907) |
| 20 | Supply and delivery and fixing of HDPE tank as per IS 12701/ 996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., (S.No.17.0 TWAD 19-20) |
| 21 | Supply delivery and fixing of GI & PVC Borewell specials including cost of all material and labour charges etc., complete |
| 22 | Bore cover plate |
| 23 | 25 mm GI Flange set |
| 24 | Collar set (Top and Bottom) |
| 25 | 25 mm MS Clamp set |
| 26 | 1\\" GI bend |
| 27 | 1\\" GI Tee |
| 28 | 1\\" GI Coupling |
| 29 | 1\\" PVC Ball Valve |
| 30 | Nylon Rope |
| 31 | Supply,Delivery and fixing of 56/0.3 (4sqmm) GI service wire including cost of all material charges and labour charges etc., complete as per Specifications. |
| 32 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender