Tender For Thorough Repair And Renovation Works To Make Ready As Model Flat For Kalyani & Durganagar Zone Named As Zone-C (1 No. Lig Type At Kalyani Hp, Kalyani, & 1No. Mig-U And No. Mig-L At Mathkal Nimta Hp, Durganagar) For The Year 2026-27
Tender Value
5.92 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
6 days left
EMD
11856
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nadia → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Thorough Repair And Renovation Works To Make Ready As Model Flat For Kalyani & Durganagar Zone Named As Zone-C (1 No. Lig Type At Kalyani Hp, Kalyani, & 1No. Mig-U And No. Mig-L At Mathkal Nimta Hp, Durganagar) For The Year 2026-27
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Oct-2026 | Extension of Date at Time | Date | 04-Nov-2026 |
| 2 | 24-Oct-2026 | Date and Change in Eligibility Criteria | Date | 18-Nov-2026 |
| 3 | 13-Oct-2026 | Extension of Date at Time | Date | 04-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Clearing compound premises of shurbs, plants, jungles etc. By cutting and removing as directed….……………………..(Payment to be made on area cleared) |
| 2 | Post Constructional Measures : (a) Anti-termite treatment to the outside of foundations with chemical emulsion by admixing Imidacloprid emulsifiable ……. of code IS-6313 (Part-III):2013. |
| 3 | Post Constructional Measures, d)Anti-termite treatment to the outside of foundations with chemical emulsion by admixing Imidacloprid emulsifiable ……. of code IS-6313 (Part-III):2013. The shutters are to be sprayed with emulsion……………. Chemical emulsion. |
| 4 | Washing and cleaning with oxalic acid powder using 33 gms./sq.m. (a) Marble floor/ marble dado |
| 5 | Washing and cleaning with soap water and rubbing with oil cloth in all types of floor and dado. |
| 6 | (a)Cleaning the walls and ceiling by scraping, sand papering and smoothening down the surface including putting. |
| 7 | b) Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) |
| 8 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)(b) Two Coatsii) Solvent based interior grade Acrylic Primer |
| 9 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.In ground floor.(iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak. |
| 10 | In 1st floor |
| 11 | Wood work in door and window frame fitted and fixed in position completeincluding a protective coat of painting at the contact surface of the frameexluding cost of concrete, Iron Butt H(e) Sal : Malayasian |
| 12 | 1st floor |
| 13 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mmwide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.(a) 35 mm thick shutters (single leaf)Ground Floor |
| 14 | 1st floor |
| 15 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bentbar, end bifurcated with necessary screws etc. by cement concrete (1:2:4) as per direction. (Cost of concrete will be paid separately)(b) 40mm X 6mm, 200mm Length |
| 16 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(iii) 75mm. X 40mm. X 1.12mm. |
| 17 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16 mm dia rod with centre bolt and round fitting.(c) 300mm long. |
| 18 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:v) 150mm long x 12mm dia. bolt. |
| 19 | Anodised aliminiumD-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fittedand fixed complete:(a) With continuous plate base (Hexagonal/ Round rod)(iv) 125 mm grip x 10 mm dia rod. |
| 20 | (a) Metallic magic eye of approved quality fitted and fixed complete. |
| 21 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mendinggood all damaes complete. (Concrete and brick work for mending damage will be paid separately)(a) Upto area 2.5 Sq.m |
| 22 | Uprooting and removing plants from the surface of walls parapet etc and making good damages. (Repairing of damages to be paid separately).(b)Medium size plant of girth of exposed stem above 75mm. but not exceeding 150 mm. lift upto 6 mtr. |
| 23 | Removing scum form the bottom floor of service latrine washing the floor thoroughly and treating the same withliberal sprinkling of bleaching powder (including cost of bleaching power) |
| 24 | Cleaning and removing conservancy garbage mixed with rubbish & other filthy materials from the road side flank, drain and compound including cutting, loading, unloading…………….. ...…………………………. |
| 25 | b)Priming one coat on timber or plastered surface with synthetic oilbound primer of approved quality including smoothening surfaces by sand papering etc. |
| 26 | (A)Painting with best quality synthetic enamel paint of approved make and brand including smoothening ..………………With other than hi-gloss of approved quality(iv) Two coats (with any shade except white) |
| 27 | (b) On steel or other metal surface :With other than hi-gloss of approved qualityiii) One coat (with any shade except white) |
| 28 | I.R.C.Febricj) 25X25X 2020 mm…….. |
| 29 | Supplying bubble free float glass of approved make and brandconforming to IS: 2835-1987.i) 4mm thick clear glass. |
| 30 | Post Constructional Measures : (a) Anti-termite treatment to the outside of foundations with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight……………………………… |
| 31 | d)Anti-termite treatment to the junction of wood work and masonry walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight including spraying at the points of contact with the adjoining masonry by drilling 6m. dia holes................................. |
| 32 | Washing and cleaning with oxalic acid powder using 33 gms./sq.m. (a) Marble floor/ marble dado |
| 33 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in groundfloor.i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 34 | b) Extra for work in grill gate.(I) For hanging and locking arrangements including supply ofmaterials and labour complete.15% extra |
| 35 | i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.1st floor |
| 36 | b) Extra for work in grill gate.(I) For hanging and locking arrangements including supply of materials and labour complete. 15% extra |
| 37 | (ii) Grill weighing above 16 Kg./sq.mtr and above |
| 38 | b) Extra for work in grill gate.(I) For hanging and locking arrangements including supply ofmaterials and labour complete.15% extra |
| 39 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.In ground floor.(iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak. |
| 40 | In 1st floor |
| 41 | (B) Dressed wood work in post , plate , battens . etc. fitted & fixed complete(excluding the cost of bolts only, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals)(iii) Sal : Malayasian |
| 42 | 1st floor |
| 43 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(iii) 75mm. X 40mm. X 1.12mm. |
| 44 | Taking out old iron higes and fitting, fixing the same with new steel screws.(c) 75mm. Long butt hinge. |
| 45 | Taking out door and window shutters and rehanging the same with old fittings. (a) With new iron screws. |
| 46 | Uprooting and removing plants from the surface of walls parapet etc and making good damages. (Repairing of damages to be paid separately).(b)Medium size plant of girth of exposed stem above 75mm. but not exceeding 150 mm. lift upto 6 mtr. |
| 47 | (a) Priming one coat on steel or other metal surface with synthetic oilbound primer of approved quality including smoothening surfaces by sand papering etc. |
| 48 | iii) One coat (with any shade except white) |
| 49 | iv) Two coats (with any shade except white) |
| 50 | Washing and cleaning with oxalic acid powder using 33 gms./sq.m |
| 51 | Washing and cleaning with soap water and rubbing with oil cloth in all types of floor and dado. |
| 52 | Supplying fittingand fixing I.R.C. fabricmeshwithcoveringbattens includingcost of screws etc complete (excluding the cost of battens).In ground floor.(j) 25mm x 25mm x 2.2mm x 2.2mm. |
| 53 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & up to 6m height for external wall)(i) 3 mm thick (weighing 7.4 kg/Sq.m) |
| 54 | Supplying, fitting and fixing shower of approved brand and make.Polythene overhead shower of approved make15 mm X 125 mm |
| 55 | Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). 15 mm |
| 56 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming toI.S. specification with P.V.C. fittings complete,C.I. brackets including twocoats of painting to bracket etc. |
| 57 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR whiteflexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(iii) 600 mm long |
| 58 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.(iii) 900 mm long |
| 59 | Supplying, fitting and fixing pillar cock of approved maked) Polythene Piller Cock (EMCO / ATLAS or equivalent)(i) 15 mm |
| 60 | Supplying, fitting and fixing towel rail with two brackets.b) Aluminium(i) 25 mm dia. and 450 mm long |
| 61 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessaryaccessories, ….……………………..(A) For Exposed Work B-(ii) 20 mm dia. medium quality |
| 62 | Supplying, fitting and fixing bib cock or stop cock(f) (i) Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO /ATLAS or equivalent) 15 mm |
| 63 | Best quality sink in mosaic in silver grey colourwith C.P. waste and otherfittings, rubber plug and chain, C.I. heavy brackets with two coats ofapproved paint.(iii) 750 mm X 450 mm X 250 mm |
| 64 | Supplying, fitting and fixing C.I. bracket including two coats of painting(a) Wash basin, Dental spitton |
| 65 | Supplying, fitting and fixing C.I. bracket including two coats of painting(d) Cistern |
| 66 | Renewing 32 mm N.P. waste fittings for wash basin including couplingC.P. chain and rubber plug. |
| 67 | Supplying, fitting and fixing in position reinforced cement polymer concretemanhole /gully pit cover with matching frame.As per I.S-12592(M.D)(vii) 1 MT load bearing capacity round manhole cover provided with twolifter hook with matching frame of size |
| 68 | Supplying, fitting and fixing shower of approved brand and make.(ii) Chromium plated round shower with revolving joint (Equivalent toCode No. 541(N) & Model- Tropical / Sumthing Special of ESSCO orsimilar brand). |
| 69 | Supplying, fitting and fixing bib cock or stop cock.(d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 70 | Rewashering stop cock /bib cock/ push cock/ pillar cock including glandi) 15mm |
| 71 | Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.ii) 450 mm long |
| 72 | Supplying,fittingandfixingapprovedbrand32mmdia.P.V.C.wastepipe, with PVC coupling at one end fitted with necessary clamps. |
| 73 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete(b) Anglo Indian(ii) Plastic (hallow type) white |
| 74 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.(i) 450 mm X 300 mm |
| 75 | Supplying, fitting and fixing towel rail with two brackets(iii) 25 mm dia. and 750 mm long |
| 76 | Internal Electrical Installation worksSupplying and fixing 240V, 32 A MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection |
| 77 | Supplying and fixing 240V, 6-16 A MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection as per direction of EIC. |
| 78 | Supplying and fixing 240V,40A,DP MCB Isolator on din rail of existing DBs and necessary connection |
| 79 | Supplying and fixing double-door (2+8) way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment |
| 80 | Supplying and Drawing 1.1KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (BrandapprovedbyEIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fishwire and making necy. connection as required(a) 2x 6 sq mm |
| 81 | (b) 2x 6 sq mm + 1x 4 sq mm |
| 82 | (c) 2x 2.5sq mm + 1x 1.5 sq mm |
| 83 | (d) 3x 1.5 sq mm |
| 84 | Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board |
| 85 | Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling |
| 86 | Supply&Fixing 240V 6A Piano key type switch(Brand approvedbyEIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover andmaking necessary connections as required |
| 87 | Supply & Fixing 240V16/20A Piano key type switch (Brand approved by EIC ) on existing sheetmetal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required |
| 88 | Supply & Fixing 240V, 6A plug socket (Brandapproved byEIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy.connections with PVC wire and earth continuity wire etc. |
| 89 | Supply & Fixing 240 V, 20 A plug socket (Brand approved by EIC), without plug top and switch, on existing sheet metal switch board withbakelite/perspex top cover by screws after making housing for combined plug switchby cutting bakelite/perspex top cover andmaking necy. connections with PVCwire and earth continuity wire etc. |
| 90 | Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switchby cutting bakelite / perspex cover and making necessary connections as required(a)100mmx100mmx65mm |
| 91 | (b)150mmx100mmx65mm |
| 92 | (c)175mmx100mmx65mm |
| 93 | (d)200mmx150mmx65mm |
| 94 | (e)240mmx200mmx65mm |
| 95 | Supply & Fixing Socket type fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connectionsetc |
| 96 | Supply & Fixing Modular type RJ45 sitable for CAT6 cable (Brand approved by EIC) on existing PVC board and top cover plate on wall and making necessaryconnections as required |
| 97 | Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) on existing GI Modular board having top cover plate and making necessary connections as required |
| 98 | Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.(a)4 sqmm |
| 99 | (b)6 sqmm |
| 100 | Supplying and fixing 240V, 32 A MCB of Breaking capacity 10kA & C characteristics on din rail of existing enclosure/DB and necessary connection |
| 101 | Supplying and fixing 240V, 6-16 A SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection as per direction of EIC. |
| 102 | Supplying and fixing 240V,40A,DP MCB Isolator on din rail of existing DBs and necessary connection |
| 103 | Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board |
| 104 | Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling |
| 105 | Supply & Fixing Socket type fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc |
| 106 | Supply & Fixing Modular type RJ45 sitable for CAT6 cable (Brand approved by EIC) on existing PVC board and top cover plate on wall and making necessary connections as required |
| 107 | Supplying and fixing 240V, 32 A MCB of Breaking capacity 10kA & C characteristics on din rail of existing enclosure/DB and necessary connection |
| 108 | Supplying and fixing 240V, 6-16 A SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection as per direction of EIC. |
| 109 | Supplying and fixing 240V,40A,DP MCB Isolator on din rail of existing DBs and necessary connection |
| 110 | Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board |
| 111 | Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling |
| 112 | Supply & Fixing Socket type fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connectionsetc |
| 113 | Supply & Fixing Modular type RJ45 sitable for CAT6 cable (Brand approved by EIC) on existing PVC board and top cover plate on wall and making necessary connections as required |
| 114 | GST @ 18% for all items |
| 115 | CESS @ 1% for all items Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 04, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Nov 18, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 days
Nov 04, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender