Housing Urban and Rular Development Government Departments Closing in 1 days TDR #57881392

Tender For Thorough Repair And Renovation Works To Make Ready As Model Flat For Behala, Konnagar, Thakur Pukur Zone Named As Zone-D (1 No. Mig-U Type At Sarsuna Hp, Behala, 1No. Lig Type Flat At Bidisha Hp, Konnagar And 1 No. Mig-L Type Flat At Prant

Issued by Government Departments · Kolkata, West Bengal
Tender Value
7.23 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
1 days left
EMD
14461
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Thorough Repair And Renovation Works To Make Ready As Model Flat For Behala, Konnagar, Thakur Pukur Zone Named As Zone-D (1 No. Mig-U Type At Sarsuna Hp, Behala, 1No. Lig Type Flat At Bidisha Hp, Konnagar And 1 No. Mig-L Type Flat At Prantik Hp, Thakurpukur ) For The Year 2026-27

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 13-Oct-2026 Extension of Date at Time Date 04-Nov-2026
2 24-Oct-2026 Date and Change in Eligibility Criteria Date 18-Nov-2026
3 13-Oct-2026 Extension of Date at Time Date 04-Nov-2026

BOQ

Name of Work:- Thorough repair and renovation works to make ready as model flat for Behala, Konnagar, Thakur Pukur zone named as Zone-D (1 no. MIG-U type at Sarsuna HP, Behala, 1No. LIG type flat at Bidisha HP, Konnagar and 1 no. MIG-L type flat at Prantik HP, Thakurpukur ) for the year 2026-27
Sl. No. Item Description
1Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.
2Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary . (A) 15 mm thick Plaster(4:1) sand cement motor.(i) INTERNALd) 3rd Floor
3(c) 10 mm thick plaster (4:1) sand cement motor.(i) INTERNAL
4Washing and cleaning with soap water and rubbing with oil cloth in all types of floor and dado.
5(a)Cleaning the walls and ceiling by scraping, sand papering and smoothening down the surface including putting
6Supplying, fitting & fixing1st qualityCeramic tiles in walls and floors to match with the existing work & 4nos. of keystones (10mm) fixed with araldite at the back of each tile &finishing the jointswithwhite cement mixed with colouringoxide if required to match the colour of tiles includingrougheningof concrete surface, if necessaryorby syntheticadhesive & grout materials etc.A) FloorWithSandCementMortar (1:4) 20mmthick&2mmthickcement slurry at back side of tiles using [email protected]/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m(i) Coloured decorative
7B) Wall WithSandCementMortar (1:3) 15mm thick & 2mm thick cement slurry at back side of tiles using [email protected]/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m(i) Coloured decorative
8Rendering theSurfaceofwalls andceilingwithWhiteCement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)
9Supplying fitting and fixing I.R.C. fabric mesh with covering battens includingcost of screws etc complete (excluding the cost of battens).In ground floor.(j) 25mm x 25mm x 2.2mm x 2.2mm.
10Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand pap ering etc. including using of approved putty etc. on the surface, if necessary (a) On timber or plastered surface :(iii) One coats (with any shade except white)
11Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand pap ering etc. including using of approved putty etc. on the surface, if necessary (b) On steel or other metal surface (iii) One coat (with any shade except white)
12Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.ii) 4 mm thick
13Removal of rubbish, earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site inall respect asper direction of Engineer in charge
14Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary . 20mm thick Plaster(6:1) sand cement motor.(i) INTERNAL Gr. Floor
1515 mm thick plaster(6:1) sand cement morterGr. floor , ii)External
1610 mm thick plaster(4:1) sand cement morterGr. floor , ii)Internal Ceiling
17Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety
18Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(a)25 mm to 30 mm thick wooden shuttering as per decision & direction o fEngineer-In-Charge.
19Reinforcement for reinforced concrete work in all sorts of structuresincluding distribution bars, stirrups, binders etc initial straightening andremoval of looserust (ifnecessary),cutting to requisite length, hooking andbending tocorrect shape, placing inproper position and binding with 16gauge black annealed wireat every intersection, complete as per drawingand direction.(i) Tor steel/Mild SteelI. SAIL/ TATA/RINL
20Applyingepoxybasedreactivejoiningagent forjoiningtheoldconcretewithfresh concrete to be appliedwithinmanufacturer's specified time as permanufacturers specification. (0.4 Kg / m² of concrete surface).
21Washing and cleaning with soap water and rubbing with oil cloth in all types of floor and dado.
22Supplying, fitting&fixing1st qualityCeramic tiles inwalls and floors to match with the existing work & 4nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessaryorby synthetic adhesive & grout materials etc.WithSandCementMortar (1:4) 20 mm thick & 2mm thick cement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m(i) Coloured decorative(A) Floor
23(B) Wall
24(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.Window grill only(a) Ground Floor
25Collapsible gate with 40 mm x 40 mm x 6mmTee as top and bottom guide rail, 20 mm x 10 mm x 2 mm vertical channels 100 mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set incement concreteand including cuttingnecessaryholes, chasingetc. inwalls, floorsetc. and making good damages complete.
26Supplying, fitting and fixing windows and ventilators with or with out integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452 - 1974 with non - friction projecting type, box type hinges, glazing clips, lugs locking bracket,handle plate etc, including hoisting in position, straightening ifrequired, fixing lugs in cement concrete (1:2:4) with stone chips 20mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing(b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only]
27(vi) steel peg stay 300 mm long including fitting and fixing.
28(viii)M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S.flats and bars.
29Providing and fixing factory made door frame (single rebate) made of single piece extruded solid PVC profile with homogenous fine cellular structure havingsmooth outer integral skin having 62 mm width x 32 mm thickness (the door frame is to be made with single piece extruded solid pvc profile where as no sheet pastedprofile shall be applied for door frame fabrication) and shall be fixed to wall asper instructions of Engineer – in – charge using 100 x 8 sheet metal CSK screws
30Neat cement punningabout 1.5mmthick inwall, dado,window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m.
31MakingV-groove line ( 6mm.wide, 6mm. deep) in plastered surface.
32(A)Supplying fittingand fixingdoor framewithM.S. angle as per drawing & direction of required section.The holes for counter sunk machine screw & nuts will be such as to fit 8 to10 mm Iron screw.The counter sunk nut to be welded.Then utsare to be welded after careful checking with screw. All welding spots should be properly filed or rounded smooth including cost of welding hinges forhingecleats , lugs forhaspbolt, socketbolt etc. and necessary M.S. clampsof 25mm x 6mm flat 225 mm long as per direction welded to the frame fittedandfixed in position excluding cost of concrete.
33Supplying, fittingandfixingM.S.clampsfordoorandwindowframemadeofflatbentbar,endbifurcatedwithnecessaryscrewsetc.bycementconcrete(1:2:4)asper direction. (Cost of concrete will be paid separately)
34Anodised aluminiumbarrel / tower / socket bolt (full covered) of approvedmanufactured fromextrudedsectionconforming to I.S. 204/74 fittedand fixedwith cadmium plated screws:vii) 225mm long x 10mm dia. bolt.t.
35Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fittedand fixedwith cadmium plated screws:(iv) 75 x 63 x 3.2mm.
36Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fittedand fixedwith cadmium plated screws:vi) 125 x 63 x 3.2mm.
37Applying Interior grade Acrylic Primer of approved quality and plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (i)Water based interior grade Acrylic primera) One coat. a) In Ground floor
38Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.
39Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth
40125mm. thickbrickworkwith1st class bricks incementmortar (1:4) inground floor.
41Supplying fittingand fixing I.R.C. fabric mesh with covering battens including cost of screws etc complete (excluding the cost of battens).In ground floor.(j) 25mm x 25mm x 2.2mm x 2.2mm.
42ii) Door stopper (Anodised aluminium)
43(b)Primingonecoat onsteel or other metal surfacewithsyntheticoilboundprimerofapprovedqualityincludingsmootheningsurfacesbysandpapering etc.
44Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand pap ering etc. including using of approved putty etc. on the surface, if necessary (b) On steel or other metal surface (iv) Two coats (with any shade except white)
45Post-Constructional Anti-termite measures:(d)Anti-termite treatment to the junction of wood work and masonry walls with chemical emulsion byadmixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight including spraying at the points of contact with the adjoining masonry by drilling 6m. dia holes at a down ward angle of about 45 degree at the junction of wood work and masonry and squirting chemical emulsion into the seholes at the rate of half litre per hole.The entire work is to be carried out as per specification of Code I.S.-6313 (Part-III)-1981. The shutters are to be sprayed with emulsion. on both sides. All wooden fixtures like almirahs, racks etc. are also to be throughly sprayed with chemical emulsion. (Payment will be made on the basis of outsidemeasurements of doors and windows)
46Post-Constructional Anti-termite measures:(e)Spot application for insecticides using Aquabase spray for pest (for bugs, cockroaches, silverfish, spider, termites,mosquitoes) to walls and ceiling etc. with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight including spraying the emulsified [email protected] litresper sq.m. by a hand operated pressure pump onwall surfaces, ceiling, electrical fixture,electrical lines including drilling holes in placeswhere sourceof termite is detected squirting chemical solution into the hole and sealing the holes with cement grout. (Rate is per sq.m. of the floor area while actual work will be all walls ceiling, rack, partition and furniture).
47Washing and cleaning with soap water and rubbing with oil cloth in all types of floor and dado.
48(a) Metallic magic eye of approved quality fitted and fixed complete
49(b)Primingonecoat on timberorplastered surfacewithsyntheticoilboundprimerofapprovedqualityincludingsmootheningsurfacesbysand papering etc.
50Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand pap ering etc. including using of approved putty etc. on the surface, if necessary (a) On timber or plastered surface :(iv) Two coats (with any shade except white)
51Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand pap ering etc. including using of approved putty etc. on the surface, if necessary (b) On steel or other metal surface (iii) One coat (with any shade except white)
52Supplying best Indian sheet glass pane sset in putty and fitted and fixed with nails and putty complete. (Inall floors for internal wall & upto6m height for external wall)(i) 3 mm thick (weighing 7.4 kg/Sq.m)
53Supplying, fitting and fixing shower of approved brand and make.(iii) Chromium plated shower arm 240 mm long (Equivalent to Code No.536(A) & Model- Tropical / Sumthing Special of ESSCO or similarbrand).
54Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).VII) 25mm
55Supplying, fitting and fixing gun metal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only)VII) 25mm
56Supplying, fitting and fixing bib cock or stop cock.(a) i) Chromium plated Bib Cock long body with wall flange with aerator(Equivalent to Code No. 512 & Model- Tropical / Sumthing Special of ESSCO or similar brand)
57Labour for dismantling G.I. pipe with fittings.25 mm dia
58f) (ii) CP 2-way bib Cock- 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand).
591 Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS- 15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixingetc. complete in all respect including cost of all necessary fittings as required, jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (b) For Concealed Work (i) CPVC Pipes Class-1, SDR-11a) 15mm dia
60b) 20mm dia
61c) 40mm dia
62Supplying, fittingand fixingwhitevitreous chinabest quality approved make wash basin with C.I. brackets on 75mm X 75mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15mmdia., C.P. chain with rubber plug of 30mmdia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia.,900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut includingmending good all damagesandpainting the brackets with two coatsof approved paint.(i) 450 mm X 300 mm size
63Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.(a) Sink only(i) 530 mm X 430 mm x 180 mm
64Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(iii) 600 mm long
65Supplying,fittingandfixingapprovedbrand32mmdia.P.V.C.wastepipe, with PVC coupling at one end fitted with necessary clamps.(iv) 1050 mm long
66Supplying, fitting and fixing pillar cock of approved make.a) (i) CP Pillar Cock- 15 mm. (Equivalent to Code No. 507 & Model Tropical / Sumthing Special of ESSCO or similar brand).
67Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.(a) With 'P' trap
68Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.C. (ii) Plastic (hallow type) white
69Supplying, fitting and fixing 10 litre P.V.C. low- down cistern conforming to I.S. specification with P.V.C. fittings complete, C.I. brackets including two coats of painting to bracket etc.
70Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.(i) 450 mm X 300 mm
71Supplying, fitting and fixing towel rail with two brackets(iii) 25 mm dia. and 750 mm long
72Supplying, fitting and fixing soap holder. (a) PTMT (Prayag or equivalent)
73Supplying, fitting and fixing bib cock or stop cock.(ii) Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model- Tropical / Sumthing Special of ESSCO or similar brand)
74a) (i) CP Pillar Cock- 15 mm. (Equivalent to Code No. 507 & Model Tropical / Sumthing Special of ESSCO or similar brand).
75Supplying,fittingandfixingapprovedbrand32mmdia.P.V.C.waster pipe, with PVC coupling at one end fitted with necessary clamps.(iv) 1050 mm long
76Supplying, fitting and fixing shower of approved brand and make.(ii) Chromium plated round shower with revolving joint (Equivalent toCode No. 541(N) & Model- Tropical / Sumthing Special of ESSCO orsimilar brand).
77Rewashering stop cock /bib cock/ push cock/ pillar cock including glandi) 15mm
78Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.ii) 450 mm long
79Supplying,fittingandfixingapprovedbrand32mmdia.P.V.C.wastepipe, with PVC coupling at one end fitted with necessary clamps.
80Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete(b) Anglo Indian(ii) Plastic (hallow type) white
81Electrical ITEMSSupplying and fixing 240V, 32 A SPN MCB of Breaking capacity 10kA & C characteristics on din rail of existing enclosure/DB and necessary connection
82Supplying and fixing 2-Way, MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting,connection & provision for earthing attachment
83Supplying andDrawing 1.1KV, 3x 6 sqmm single core stranded 'FR'PVC insulated & unsheathed single core stranded copper wire(Brand approved by EIC)of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and makingnecy. connection as required
84Supplying andDrawing 1.1KV, 2x 6 sqmm + 1x4sqmm single core stranded 'FR'PVC insulated & unsheathed single core stranded copper wire(Brand approved by EIC)of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and makingnecy. connection as required
85Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc.2x2.5 sqmm + 1x 1.5 sqmm
862x4 sqmm + 1x 2.5 sqmm
87Distribution wiring in 1.1KV grade 2x22/0.3(1.5sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) for ECC in 19mm bore, 3mm thick polythene pipe complete with all accessories embedded in wall for horizontal & vertical runs and in suitable size PVC casing capping (Precision make) for ceiling portion only, incl. necy. fittings etc. to light/ fan/ call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2no. suitable size “Ph&N” copper bar &earthing attachment flushed in wall incl. mending good damages to original finish [only PVC casing-capping on ceiling and remaining portion concealed]Average run 6 mt
88Supplying and fixing 240V, 6-16 A SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection as per direction of EIC.
89Supplying and fixing 240V,40A,DP MCB Isolator on din rail of existing DBs and necessary connection
90Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board
91Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling
92Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.
93Supply & Fixing RJ45 sitable for CAT6 cable (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required
94Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required
95Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
96Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cuwire and earth continuity wire etc
97Supplying & Drawing LAN cable (CAT6) (Brand approved by EIC) in prelaid PVC rigid conduit/ in polythene pipe embeded in wall.
98Supplying & Drawing 2-pair Telephone cables with high density polyethylene insulated solid annealed high conductivitybare copper of dia 0.5mm in prelaid PVC rigid conduit/ in polythene pipe embeded in wall.
99Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathedcopper wire for ECC, incl. necy. fittings etc. with S & F 6A 5 pin Modular type plug socket and switch (Brand approved byEIC) fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. necy. connection makingearthing attachment, painting and mending good damages to building works [PVC casing-capping on surface and Switchboard concealed](a) On board
100(b) Average run 4.5 Mtr
101Supplying and fixing2+ 12-way double door SPN MCB Distribution Board with IP 42/43 protection,( Make-Legrand/ Seimens/ Havels, as per direction of EIC) concealed in wall after cutting the wall & mending good the damages to original finish incl. Interconnection with suitable size ofcopper wire and neutral link & provision for earthing attachment.
102Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., includingsupplying sockets, tapes.(a) 2.5sq mm
103(b) 4 sqmm
104( c ) 6 sqmm
105SupplyingandfixingPVCcasing capping [Precision Make] on wall or ceiling, incl.necy.PVC fittings etc.and mending gooddamages to building works(a) 20 x 10 mm size
106(b) 25 x 10 mm size
107Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as requiredand mending good damages to building works(a) 20 mm size
108(b) 25 mm size
109Supplying and fixing 240V, 32 A MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection
110Supplying and fixing 240V, 6-16 A MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection as per direction of EIC.
111Supplying and fixing 240V,40A,DP MCB Isolator on din rail of existing DBs and necessary connection
112Supplying and fixing double-door (2+4) way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment
113Supplying and Drawing 1.1KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (BrandapprovedbyEIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fishwire and making necy. connection as required(a) 2x 6 sq mm
114(b) 2x 6 sq mm + 1x 4 sq mm
115(c) 2x 2.5sq mm + 1x 1.5 sq mm
116(d) 3x 1.5 sq mm
117Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board
118Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling
119Supply&Fixing 240V 6A Piano key type switch(Brand approvedbyEIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover andmaking necessary connections as required
120Supply & Fixing 240V16/20A Piano key type switch (Brand approved by EIC ) on existing sheetmetal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required
121Supply & Fixing 240V, 6A plug socket (Brandapproved byEIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy.connections with PVC wire and earth continuity wire etc.
122Supply & Fixing 240 V, 20 A plug socket (Brand approved by EIC), without plug top and switch, on existing sheet metal switch board withbakelite/perspex top cover by screws after making housing for combined plug switchby cutting bakelite/perspex top cover andmaking necy. connections with PVCwire and earth continuity wire etc.
123Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switchby cutting bakelite / perspex cover and making necessary connections as required(a)100mmx100mmx65mm
124(b)150mmx100mmx65mm
125(c)175mmx100mmx65mm
126(d)200mmx150mmx65mm
127(e)240mmx200mmx65mm
128Supply & Fixing Socket type fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connectionsetc
129Supply & Fixing Modular type RJ45 sitable for CAT6 cable (Brand approved by EIC) on existing PVC board and top cover plate on wall and making necessaryconnections as required
130Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) on existing GI Modular board having top cover plate and making necessary connections as required
131Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.(a)4 sqmm
132(b)6 sqmm
133Supplying and fixing 240V, 32 A MCB of Breaking capacity 10kA & C characteristics on din rail of existing enclosure/DB and necessary connection
134Supplying and fixing 240V, 6-16 A SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection as per direction of EIC.
135Supplying and fixing 240V,40A,DP MCB Isolator on din rail of existing DBs and necessary connection
136Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board
137Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling
138Supply & Fixing Socket type fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connectionsetc
139Supply & Fixing Modular type RJ45 sitable for CAT6 cable (Brand approved by EIC) on existing PVC board and top cover plate on wall and making necessary connections as required
140Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) on existing GI Modular board having top cover plate and making necessary connections as required
141GST @ 18% for all items
142CESS @ 1% for all items Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57881392
AUTHORITY Government Departments
TENDER VALUE 7.23 Lakhs
LAST DATE 18-11-2026
Authority
Authority Name West Bengal Housing Board
Work Description Tender for Thorough Repair And Renovation Works To Make Ready As Model Flat For Behala, Konnagar, Thakur Pukur Zone Named As Zone-D (1 No. Mig-U Type At Sarsuna Hp, Behala, 1No. Lig Type Flat At Bidisha Hp, Konnagar And 1 No. Mig-L Type Flat At Prantik Hp, Thakurpukur ) For The Year 2026-27
Basic Detail
Tender No WBHB/DDEWII/NIeT07/2026-27/2CL
Bidding Type Tender
Location
City Kolkata
State West Bengal
Key Dates
Publish Date 24 Oct 2026
Submission Date 18 Nov 2026
Open Date 20 Nov 2026
Finance
Tender Value 7.23 Lakhs
Tender Fee Ref. Documents
EMD 14461
Exemption Not Available
Document List
BOQ_2561743.xls
d7e09650-e500-4789-8b17-d48ccf381572.html
Tendernotice_1.pdf
WBHBTenderForm.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 24, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 04, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 18, 2026
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 1 day
Nov 04, 2026
18:00 IST

Corrigendum-3 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 18, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Nov 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_2561743.xls

html

d7e09650-e500-4789-8b17-d48ccf381572.html

pdf

Tendernotice_1.pdf

pdf

WBHBTenderForm.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender