Tender For Fabrication, Supply, Installation, Testing And Commissioning With Required Plumbing , Civil And Electrical Works For Installation Of Fully Painted Modular 3 Seater European Toilet Unit With Proper Sturdy Doors Having Lock And Key, Includin

Sharing tender

Tender for Fabrication, Supply, Installation, Testing And Commissioning With Required Plumbing , Civil And Electrical Works For Installation Of Fully Painted Modular 3 Seater European Toilet Unit With Proper Sturdy Doors Having Lock And Key, Including A Wash Basing Outside The Toilet But Properly Attached To The Module With Necessary Weather Protection, As Per The Specification And Picture Representation Of The Toilet Unit To The Solid Waste Management Facility At Kandalamala, Koduvally Municipality, Kozhikode District, Kerala State. , Supply Installation, Testing And Commissioning Of 3 Seater Module Toilet System With All Civil, Plumbing And Electrical Works , Specification For Prefabricated Ms Structure With Sandwitch Panels And Water Tank Portable Toilet Without Storage Container- 3 Seater Module Number Of Compartments -3 Type Of Wc - European With Ceramic Pan Water Facility - Direct From External Source Sewage Facility - Shall Be Connected To Existing Tank With 100Mm Outlet Facility With Butterfly Valve. Ventilation - 1 No Wash Basin - Separate With Covered Space. Leech Pit Provision - Required Civil Work - To Be Carried Out By Supplier Side Panel Frame Material - 35Mm X 35Mm X 5Mm Thick And 25Mm X 25Mmx 3Mm Thick Ms Angles Top Roof Frame Material - 40Mm X 40Mm X 5Mm Thick - 35Mm X 35Mm X 5 Mm Thick And 25 Mm X 25 Mm X 3 Mm Thick Ms Angles Top Roof Support Frame Material - 40Mm X 5 Mm Thick, 35 Mm X 5 Mm Thick, 25 Mm X 3 Mm Thick Ms Flats Partition Frame Material - 35Mm X 35Mm X 5 Mm Thick, 25 Mm X 25Mm X 3 Mm Thick Ms Angles Ventilation Frame Material - 25 Mm X 25 Mm X 3 Mm Thick Flat Ms Door Frame Materials - 50Mm X 25 Mm Of 14-16 Gauge Rectangular Ms Hollow Pipe Support Material For Door Panel - Aluminum U Channel Of 18 Gauge. Door Hinges (Two Numbers) - 75 Mm With 1.2 To 1.5 Mm Thickness Ms Tank Holder Frame Material - 25 Mm X 3 Mm Thick Ss Flat Unit Under Structure - With Leg Base Stairs - With Stair Ladder At One Side Stair Material - 25Mm X 25 Mm X 1.5Mm Thick Square Pipe Gi Door Tee Material - 40Mm X 40 Mm X 40Mm X 5Mm Ss Tee Side Panel Material - Insulated Walls To Be Made Of Continue Lines Sandwich Panel With 0.35 Mm Thick Pre Coated Steel Sheet (Ppgi-Sheet) Having 120 Gsm With Minimum 4 Microns Epoxy Primer On Both Sides Of Sheet And Polyester Top Coat Min. 15 Microns On Both Sides Of Puf With Polyurethane Foam Thickness 38 Mm Having Density 40 Kg/Cum +/-2 Kg/Cum Top Roof Panel Material - Insulated Walls To Be Made Of Continue Lines Sandwich Panel With 0.35 Mm Thick Pre Coated Steel Sheet (Ppgi- Sheet) Having120 Gsm With Minimum 4 Microns Epoxy Primer On Both Sides Of Sheet And Polyester Top Coat Min. 15 Microns On Both Sides Of Puf With Polyurethane Foam Thickness 38 Mm Having Density 40 Kg/Cum +/-2 Kg/Cum Door Panel Material - Insulated Walls To Be Made Of Continue Lines Sandwich Panel With 0.35 Mm Thick Pre Coated Steel Sheet (Ppgi- Sheet) Having 120 Gsm With Minimum 4 Microns Epoxy Primer On Both Sides Of Sheet And Polyester Top Coat Min. 15 Microns On Both Sides Of Puf With Polyurethane Foam Thickness 38 Mm Having Density 40 Kg/Cum +/-2 Kg/Cum Partition Panel Material - Insulated Walls To Be Made Of Continue Lines Sandwich Panel With 0.35 Mm Thick Pre Coated Steel Sheet (Ppgi- Sheet) Having 120 Gsm With Minimum 4 Microns Epoxy Primer On Both Sides Of Sheet And Polyester Top Coat Min. 15 Microns On Both Sides Of Puf With Polyurethane Foam Thickness 38 Mm Having Density 40 Kg/Cum +/-2 Kg/Cum Floor Material (Inside Cubical) - Fitted With Plastic Light Weight Lldpe Roto Molded Size Of Each Cubical (Lxwxh) +/- 25 Mm - 1220Mm X 1220Mm X 1980 Mm Partition Height +/- 20 Mm - 1830 Mm Stair Size - As Required Overhead Tank Material - Pvc Overhead Tank Capacity - 200 To 500 Liter Sewage Tank Material - Direct Connection To Existing Tank Facility Electric Connection - From Existing Mains Base Floor Surface (Inside) - To Be Suitably Slanted Towards Out Let Connection Raised Platform For Passage - Width Of Passage 1220 Mm And Height Of Passage Above Ground Level 225 Mm Antiskid Block Finish On Passage Only Brick Foundation Size - 200 Mm X 200 Mm With Depth Of 200Mm From Ground Level For Anchor / Column Location. Pocket To Be Filled - With Plain Cement Concrete Of 1:2:4 Steel Ratio After Grouting Of Steel Element Of Structure Plinth Height -300 Mm With 125 Mm Brick Plus 1:5 Mortar Platform Size - 1125 Mm X 1500 Mm Soling Height - 75 Mm By Single Brick Flat Floor Casting - 75 Mm Plain Cement Concrete Of 1:2:4 Above Brick Flat Soling Outside Plinth Plaster - 15 Mm Thick On Brick Work With Cm 1:5 Stairs Dimension - Two Number Stairs Of 250 Mm (Width) X 900 Mm (Length) X 150 Mm (Height) Pipe Connection - To Be Between Toilet Structure Inspection Channel And Existing Leech Pit. Warranty Period - Minimum 1 Year.