Tender For Repair And Maintenance Work To Existing Primary School Building At Kherdi Panchayat South Zone D&Nh, 2025-26.
Tender Value
80.58 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
0 days left
EMD
1.61 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dadra and Nagar Haveli → Dadra and Nagar Haveli
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Work To Existing Primary School Building At Kherdi Panchayat South Zone D&Nh, 2025-26.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing of sheet roofing incl. Ridges, hips, valleys gutters etc. Stacking of serviceble materials and disposal of unserviceble materials with all lead and lift (ii) A.C.Sheet roofing.ROOF |
| 2 | Dismantling tiled or stone floors laid in mortar including stacking of serviceable material and disposal of unserviceable materials with all lead and lift.CLASSROOM/LOBBY WASHROOM |
| 3 | Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing tank etc. including stacking the materials with all lead and lift. |
| 4 | Dismentalling Door, Window ventilators etc. (wood or steel) shutters incl. Chawkhast architraves hold fast and other attachments etc. complete and stacking them within all lead and lift not ecxeeding 3 Sq.m. in area. |
| 5 | Scraping of existing plaster- Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift |
| 6 | Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete. |
| 7 | Repair of door and window…door and window |
| 8 | Providing and fixing AC Sheet etc completeROOF |
| 9 | Providing and fixing A C sheed ridge etc completeROOF |
| 10 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compoun conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge.With average thickness of 120 mm and minimum thickness at khurra as 65 mm. |
| 11 | Providing material and Labour for 20mm thick cement plaster first coat 12mm thick in C.M. 1:3 and finishing coat 8mm thick in C.M. 1:1 etc. |
| 12 | Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3- sand) |
| 13 | Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. |
| 14 | Painting two coats (excluding priming coat) on new wood and wood based surface with ready mixed paint, brushing, oil, gloss, semi gloss to give and even shade including cleaning of all dust, dirt and other foreign matter sand papering and stopping. |
| 15 | Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. |
| 16 | Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete |
| 17 | Providing & erecting Approved make Ceiling Fan with double ball bearing ISI mark with condenser A.C.230V 50c/s. 1400 mm. sweep complete, canopy erected on existing hook or clamp with earthing [ Make shall be approved by Engineer in Charge] |
| 18 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 %( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet [Cat-III] |
| 19 | Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed by Engineer In charge./ (2) One No 5 pin plug / Cat.III |
| 20 | providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required. (a) One wire 1.00 sq. mm(a) One wire 1.00 sq. mm |
| 21 | (b) One wire 1.50 sq. mm |
| 22 | PVC SWR pipes IS 13592 for Drain - 110 mm dia |
| 23 | Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand :4- graded stone aggregates 20 mm nominal size) and curing completeexcluding cost of formwork in (A) Foundation and Plinth |
| 24 | Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick |
| 25 | Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. |
| 26 | Providing and fixing brass screw down stop tap 15mm dia |
| 27 | Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. |
| 28 | Providing and fixing Urinal or approved quality including conecting the Urinal with waste pipe , tap etc. complete.(A) White earthenware flat back or corner type size 430mm x 260mm x 350mm.Male |
| 29 | Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm.Female |
| 30 | W.C. pan Indian and European typeIndian type W.C. Pan |
| 31 | European type, W.C. Pan |
| 32 | Jet spray heavy duty with S.S. Braided hose 60 cm long |
| 33 | Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)(A) Vitreous China (I) In white colour |
| 34 | Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square frame.250mm with 1350 RPM Cat.II |
| 35 | Screen Printing / Art work process (Board) (Eng.) |
| 36 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter. |
| 37 | Providing and supplying in stardard length ISI mark rigid unplasticised PVC pipes suitable for potable water with ring fit joints including cost of rings, as per IS specification no 4985/1988 including all local and central taxes transportatin, freight charges, octgroi, inspection charges, loading, unloading, conveyance to the site of work including cost of jointing materials etc complete Test pressure 4 kg /cm2 110mm dia |
| 38 | Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet fixed with hilti screw and rubber silicon sealer and alluminium strip of size 50 x 3 mm etc complete as directed by Engineer in charge. |
| 39 | Providing and laying ceramic tiles 6mm thick in skirting riser of steps and dedo on 10mm thick plaster in CM 1:3 (1-cement :3 coarse sand) and jointed with white cement slurry. |
| 40 | Providing and applying water proof treatment by appying paints of Asian paints SMART CARE make with 5 year water proofing warranty. |
| 41 | Providing and fixing extruded aluminum window having extruded alumimum Color Powder Coated section frame main outer side 63.50mm x 38.10mm x 1.95mm, @Wt.1.094 Kg/mt, horizontal two track member size 61.85mm x 31.75mm x 1.20mm @ Wt. 0.695 Kg/mt, vertical member of size 61.85mm x 31.75mm x 1.30mm, @ Wt. 0.659 Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm @wt. of 0.456Kg/mt, vertical member of size 40mm x 18mm x 1.29mm @ wt. of 0.456Kg/mt, @ with 5mm thick transparent bronze colour tinted float glass with powder coated alumimum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window. |
| 42 | Providig & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes (weights not less than 10 kg/sqm) |
| 43 | Providing and fixing 150mm wide 450mm over all semicircular plain G.I.sheet class-3 gutter with Iron brackets 40mm x 3mm size Bolts, Nuts, washers etc. including making necessary connection with rain water pipes. (i) 0.80 mm thick Sheet. |
| 44 | Providing valleys 900mm overall in plain 1.6mm thick G.I. sheet fixed with G.I. or L Hooks, Bolts and nuts glavanised iron J or L Hooks Bolts and nuts 8mm dia G.I. Limpet and bitumen washers complete. |
| 45 | Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300 pnumatic compressed / Vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete. |
| 46 | Providing and fixing FRP frame size 125x65mm and 35mm thick FRP shutter with wood grain raised panneled design finish shutter having extra reinforcement on sides & edges in Gel coat finish. The core of the shutter & frame is to be filed up with injected polyrethene foam done in situ alongwith embedded wooden pieces for stiffening & alos taking hinges & fintures. The whole FRP frame & shutter is to be water proof weather proof, termite proof & resistance to mild aci/alkali. Rates are to be inclusive of S.S. hings with fastener sleeve & allumininum fixtures & fastenings. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender